SMR-100 is a 2.1 VOC clearcoat formulated for mobile repair that offers fast cure and high gloss while maintaining quality. It utilizes new resin technology allowing extremely fast cure within 15 minutes for buffing. SMR-100 is applied in 2-5 coats at 5-15 psi with a 1.0-1.3mm tip and activated at a 4:1 ratio with SMR-150 activator and optional reduction of up to 5% with SMR-300 reducers. It can be recoated after 1 hour of air dry or after cool down when baked and requires light sanding or compounding after 15-20 minutes of air dry or after cool down from express drying.

1. SMR-100
SPEEDO CLEAR (2.1 VOC)
TECHNICAL DATA
DESCRIPTION:
SMR-100, 2.1 V.O.C. Speedo Mobile Repair clearcoat has been specifically formulated for the
mobile repair industry. SMR-100 has been designed to increase productivity without
sacrificing quality. SMR-100 is a 2K acrylic urethane clear with superior UV and chemical
resistance.
TECHNICAL PRODUCT INFORMATION:
SMR-100, Speedo Mobile Repair 2.1 V.O.C. clearcoat utilizes new resin technology which
allows for an extremely fast cure while maintaining an ultra high gloss. SMR-100 is easy to
apply and can be BUFFED in 15 MINUTES, yielding a DOI equal to an overnight dry clear.
PACKAGING:
Part Number Description Temp. Size Qty. Case
SMR-100 SPEEDO CLEAR 2.1 VOC Gallon 4
SMR-100-Q SPEEDO CLEAR 2.1 VOC Quart 6
SMR-150-Q SPEEDO ACTIVATOR Quart 12
SMR-150-8 SPEEDO ACTIVATOR 8 oz. 12
SMR-300-Q SPEEDO THIN SPEED REDUCER FAST 55°F - 65°F Quart 12
SMR-310-Q SPEEDO THIN SPEED REDUCER MEDIUM 65°F - 80°F Quart 12
SMR-320-Q SPEEDO THIN SPEED REDUCER SLOW 80°F - up Quart 12
NOTE: Using any other reducer will increase V.O.C. above 2.1 lb/gal.
NOTE: Using any other reducer will DECREASE product performance.
MIX RATIO:
SMR-100 is activated with SMR-150 (Speedo Activator) at a 4:1 ratio and can be reduced up
to 5% with SMR-300 / SMR-310 / SMR-320 Speedo Reducers.
4 Parts SPEEDO CLEAR
1 Part SPEEDO ACTIVATOR
5% Optional SPEEDO THIN SPEED REDUCER
BASECOAT:
Can be applied over any urethane compatible basecoat. Please follow the basecoat
manufacture’s recommended clearcoat dry times.
SpeedoKote LLC ■ 5701 N. Webster St. ■ Dayton, Ohio 45414 ■ (937) 280-0091 ■ Fax (937) 280-0092
www.speedokote.com ■ e-mail: sales@speedokote.com

2. GUN SETUP
Fluid Tip psi
Mini Spray Gun 1.0 – 1.3mm 5-15 psi
Conventional Gravity Feed 1.3mm 25-30 psi
APPLICATION
Using a 1.0-1.3 mm spray tip, apply 2-5 coats continuously until desired leveling is achieved.
No flash required between coats.
DRY TIMES
Air Dry
Flash Between Coats 0 minutes
Dust Free 1 minutes
Air Dry 10-15 minutes
Express Dry
Flash Between Coats 0 minutes
Flash Before Force Dry 0 minutes
Bake Time 5 minutes @120°F to 140°F
BLENDING
Using SMR-400-Q / SMR-410-A Speedo Blend apply a light mist to blend edge until desired
look is achieved.
RECOATABILITY/REPAIR
SMR-100 Speedo Clear may be recoated for repair. After cool down when baked. Air dry
repair 1 hour.
SANDING/COMPOUNDING/POLISHING
Optimum Times
Express Dry After cool down
Air Dry 15-20 minutes
Sanding
Express Dry After cool down Light de-nib: 2000 grit wet
Air Dry 15-20 minutes Light de-nib: 2000 grit wet
Compounding
Express Dry After cool down Foam compound pad (recommended)
Air Dry 15-20 minutes Foam compound pad (recommended)
Polishing
Express Dry After cool down Foam polishing pad (recommended)
Air Dry 15-20 minutes Foam polishing pad (recommended)
SpeedoKote LLC ■ 5701 N. Webster St. ■ Dayton, Ohio 45414 ■ (937) 280-0091 ■ Fax (937) 280-0092
www.speedokote.com ■ e-mail: sales@speedokote.com