Highlights van de nieuwe functionaliteit en verbeteringen van de CAE software Femap 11.3, met daarbij uitleg waarvoor je de functie zou kunnen gebruiken.
14. • New connection editor
• Easier management and access to connections
• Direct editing
• Sorting & Filters
User interface
15. VIEW
What’s New in Femap 11.3
Deel 1:
• User interface
• View
• Modelling
Deel 2:
• Meshing
• Analysis and Results
• Post-processing
16. Roll Thru (Through…)
• ‘In het model’ kunnen
kijken, zonder eerst iets uit
te zetten.
• Instellen Shift+Alt
• Toggle met andere
commando’s
• Werkt icm 3D controller
View, Roll Thru
17. New method for front picking
• Turn on/off in File / Preferences /
Graphics
• If an entity is not represented by a
pixel, it will not be picked
• Works in single pick, box, circle,
polygon, etc.
Pick visible
18. • Rotate about View Center = Default
• Rotate about Coordinate system
• Rotate around Cursor location
• Zoom arount Cursor location
Rotate & Zoom
20. • View Simple Default
• Show/Hide individual Elements
• Double click MMB/Wheel to Autoscale (Fit)
General enhancements
21. MODELING
What’s New in Femap 11.3
Deel 1:
• User interface
• View
• Modelling
Deel 2:
• Meshing
• Analysis and Results
• Post-processing
22. • New Element Type:
Spring/Damper &
DOF Spring to ground
Spring to ground
23. Example Spring to Ground
LxBxH= 1500 x 1250 x 1000 mm
Kokers 80 x 80 x 4 mm
• Frame supported in Y-
direction, loaded with
gravity.
• Constraint by
Spring/Damper
• No extra nodes needed
24. Spring to ground (2)
• Analysis without Warning
• Small reactions at springs
31. Max Quads
• Goal: all quad mesh through triangle removal
• Will allow triangles when required
• With an odd number of edges there will always be one triangle
Quad Meshing Improvements
32. Example: default mesh contains 39 triangles – with Max Quads it’s just 1
Quad Meshing Improvements
Default mesh Max Quads mesh
33. • Internal element growth now
available with quad meshes
• Max Quad combined with Quad
Layers provides maximum mesh
customization and flexibility >>
Quad Meshing Improvements
46. • Default displaying only active part of Post
Processing Toolbox
• Max/Min in Post Titles
• Legend: Reverse order
• Export only Results from entities in active group
General Enhancements
47. + gemak en snelheid van modelopbouw
+ Weergave model
+ mesh kwaliteit
+ Mogelijkheden Post processing
Veel nieuwe functies en toolbars, gebruiker moet zich dit
eigen maken.
Femap 11.3
51. • Bekijk de Newfeat.pdf, geeft een goed beeld van wat er
vernieuwd is.
• Neem de tijd om wat nieuwe functionaliteiten met
simpel model te testen.
• Dwing jezelf nieuwe functies te gebruiken en geef ze
een kans.
• Kies na testen wat voor jou werkt.
Nieuwe versie
52. • A modeling environment that’s dedicated to FEA
• The in-depth, detailed functionality required to
accurately model real-world parts and
assemblies
• Customer driven features and functionality
Femap direction
53. • Ga mee met de ontwikkeling van de software
• Innoveer door nieuwe functionaliteit te benutten.
Tot Slot