https://www.matzensolutions.com/mep-shop-drawing-services/ - Here we shows the what are the different types oof MEP Shop Drawings?

1. What are Different Types of MEP
Drawings?
Matzen Solutions

2. What are MEP Drawings?
For the construction industry; it is a field of engineering with a sole focus on building
safe, working and energy efficient structure for humans. The Mechanical part of the
MEP discipline is about HVAC systems (heating, ventilation and air-conditioning),
and the Electrical part refers to the power supply and Plumbing addresses water
supply and drainage of wastewater. To prepare these drawings Revit MEP, AutoCAD,
CADDUCT, CADPIPE, and Autodesk Inventor are used.

3. Why are MEP drawings important to the
construction industry?
Construction MEP drawings help to visually communicate how MEP components
should be constructed and how will they function. They are widely used to convey
ideas across the construction industry. To make Coordination Drawings
understandable, expert CAD drawing and drafting companies use familiar symbols,
units of measurement, and notation systems. Preparation of these drawings
according to industry standards like ASHRAE, SMACNA, NFPA and IEEE, and in
appropriate formats & layouts as per client and construction requirements is also
necessary.

4. How are MEP drawings prepared?
Detailed MEP shop drawings help subcontractors to install the ductwork, piping,
plumbing, electrical conduits & fire protection piping, such that the elevations and
routing of each system do not interfere with each other. Additionally, each trade is
coordinated with the building structure and architecture, such that there are no
conflicts between ceiling and structural members.
Upon establishing the routing and elevations for the HVAC a composite coordinated
shop drawing that overlays or incorporates all the services on a single and main
MEP coordinated shop drawing is created. Then MEP coordinated shop drawings
are signed off by all those involved in the construction project; allowing each the
subcontractor to create detailed duct shop drawings, plumbing shop drawings, fire
protection shop drawings, etc. Only an expert and experienced professional CAD
service provider can save several man-hours of labor in the field for an installing
contractor, hence maximizing profits on a particular project.

5. Different types of MEP drawings:
Penetration Drawings
Penetration drawings are prepared for mechanical, electrical and plumbing items that
pass through an opening in a wall or floor. It includes items like pipes, electrical
conduits, electrical cables, and ducts. Piercing these items carefully into the wall or
floors is necessary, as they create a space between the surroundings and penetrant.
These drawings help contractors with necessary views with appropriate clearance.

6. Different types of MEP drawings:
MEP Shop Drawing Detailing
It is done for dimensions, elevations, and annotations. No fabricator can imagine
workshop fabrication or onsite installation without shop drawings. These types of
MEP drawings are made with help of standard codes applicable to the project.

7. Different types of MEP drawings:
Block-out and Sleeve Drawings
Block-out drawings are useful for cement and steel contractors. Knowhow about
where to leave space on floor and ceiling cutouts for various MEP systems is a
challenge that is addressed using these drawings. Sleeve drawings as a subset of
these drawings are used to ensure that the holes left between the walls and floor are
placed properly for piping and ductwork.

8. Different types of MEP drawings:
Pipe Spool Drawings
The spool is known to be the assembly of components which are prepared in a
workshop and then shipped to the installation site. Pipe spool drawings are used to
gather information required by fabrication workshops to accurately assemble the
spool.

9. Different types of MEP drawings:
Coordination Drawings
Construction projects with intense mechanical, electrical and plumbing requirements
face the risk of interference. Lots dollars, time and efforts go in vain because of
unaccounted clashes and collisions that go unidentified during the design phase,
only to get detected when the project goes on-site. Detection of hard and soft
clashes within MEP systems, 3D clash detection reports with detailed mapping of
every part of the current structure to resolve clashes, and clash-free and streamlined
installation of MEP systems; is one of the most important tasks these days.

10. Different types of MEP drawings:
As-Built Drawings
In any building project, it is very common to have on-site changes. As-built drawings
are used to assess what has been actually built. More than often, contractors mark
up the changes which are made on-site.

11. Best MEP Design & Drafting Services
Matzen Solutions is one of the leading MEP Design & Drafting service providers. We
deliver drafting and modeling solutions for utility systems and building services such
as HVAC, lighting, fire protection, steam, and plumbing. Our CAD experts assist EPC
firms, contractors, engineers, consultants and HVAC contractors to efficiently plan
and design electrical, plumbing, and electromechanical systems across industrial,
residential, hospital, educational and commercial building facilities.

12. Reach US @
Matzen Solutions:
Web: Matzensolutions.com
Email: info@matzensolutions.com

13. Thank You!!!