The weekly report summarizes the progress of a student group working on an air purifier project. It lists the group members and their roles. It describes how the group finished designing the overall circuit and is now working to implement the circuit by connecting equipment to a double-sided PCB, which has proven difficult. The engineering analysis identifies that the two-sided circuit design is compact but connecting equipment to the PCB takes time. The goal for next week is to complete the product so that all machine functions can be tested.

1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 2, 2012
Name-Surname Natthaphon Chuanngulueam
Student ID. 54261509
Group Name 361 degree
N’ tong(2A) p’ jame(2B) p’ po(2B)
Engineering Team N’ toey(2A) p’ path(2B) n’ jimmy(2B)
Members N’ jip(2A) p’ kang(2B)
N’ pui(2A) p’ note(2B)
Product Design P’ katall p’ klao
Team Members P’ earth p’ chompu
Weekly Progress
Overall :After working on. Weeks,sent the entire circuit of the air purifier according function all the
machine.Next, we are doing the circuit from example is doing put the circuit finalin the PCB.The
steps are as follows.first, write the line of circuit into final PCB.second, cut section not want out
from first step.third,connect the equipment into the final PCB.this problem in week is connect the
equipment into the PCB, because group make the PCB two face.i am solution by made first the face
next make the face the rest.
Figure 2.circuit all sound
Figure 1.equipment all the circuit controller
Engineering Analysis
Strong Point
The circuit for machine is two face in part controller, it is small the circuit.
Week Point
The Equipment connected into the PCB is hard to make slow connect successful.
Next Week Job
Send the final product all by machine can run the function all.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI