Weekly report hack
•
0 likes•49 views
The weekly report discusses progress on a multidisciplinary workshop project. The student helped install a power supply into the product and provided power to every part. They also helped combine all parts of the product and cooperated with the architecture team. While completing their part was a strength, combining all parts into the product took a lot of time. Next week's task is to present at Bangkuntain.
Report
Share
Report
Share
Download to read offline
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 2, 2012
Name-Surname Vorapol charoenkitwasin
Student ID. 53219008
Group Name Habithai
Engineering
Hack,top,U,Knight,tos,O,Art,Boon,Arm,Ball,Ball
Team Members
Product Design
P”pete,P”ice,P”pae,P”tuang
Team Members
Weekly Progress
On this week, my part is already to use. By I am install power supply
into product by helped architecture. Now my power supply can send the
power to every part of device in my product. Then refinished in my part I got
to help my team by help to compound every part of product and I have
cooperation with architecture
PCB Power Circuit
Device supply circuit
Engineering Analysis
Strong Point
-My part is completely.
-I help my team and architecture.
Week Point
-It hard to compound every part into product by spend time to much.
Next Week Job
-Presentation at bangkuntain.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/weeklyreporthack-120502040014-phpapp01/85/Weekly-report-hack-1-320.jpg)
Recommended
Weekly report 3
The weekly report summarizes the progress of a multidisciplinary workshop group. It discusses that the student completed the LED function for their part of the project and helped recheck circuits on the PCB board for other group members. It was challenging to combine all parts into the final product due to the time it took. Next steps include preparation for the presentation.
54261510.
This weekly report summarizes the progress of the Instinct group in the multidisciplinary workshop. It discusses the members working on the LED and gas sensor components. It notes the strong point of their work being better performance and accessibility for elderly users. However, the weak point is the device structure not being designed for all foods. Next week the report's author will continue developing and working with the team.
GYAN PRAKASH RESS(1)
Gyan Prakash is seeking a challenging position in the electrical/power industry that allows for innovation, creativity, and continuous learning. He has over 5 years of experience in installation, commissioning, project management, and maintenance of electrical equipment including PV modules, inverters, and transformers. He holds a B.Tech degree in electrical engineering and has experience working with Microsoft Windows and Office software.
54261507 281 4
1) The report provides an update on the weekly progress of the Instinct group's product design project.
2) This week, the student assembled the circuit and improved the design from the first version, testing the sensor's sensitivity and accuracy with different food wastes.
3) Engineering analysis found that the sensor has high precision without uncertainty according to its datasheet, though integrating the circuit into the machine still needs work.
CV
Indrasen Reddy is a mechanical engineer seeking a challenging position where he can learn new skills and contribute to an organization. He has a BE in Mechanical Engineering with 64% aggregate from Vishweshwarai Technological University. He currently works as an Assistant Design Engineer at Getech Equipments International Pvt Ltd, where his responsibilities include preparing drawings, manuals, and sizing equipment for mining rigs using AutoCAD, SolidWorks, and other software. He also has experience with a one-month project developing a device to convert wind and wave energy into electrical energy.
Jude_Resume_Technical
P. Jude Kingsly has over 10 years of experience in solar power project design and execution. He holds a Bachelor's degree in Electronics and Communication Engineering and has worked in roles such as Trainee Engineer, Design Engineer, and Project Manager developing solar photovoltaic systems, solar DC microgrids, and uninterrupted DC power projects. Currently he works as a Project Manager at Cygni Energy Pvt Ltd handling the design and implementation of various solar power projects.
Weekly report 1
This weekly report summarizes the progress of a student group working on a mosquito killing machine product. In the report, the student discusses having issues with the power supply not providing enough current for all parts of the product, including the LED function they are working on. The student learned it is better to design based on the desired power of the LED first before calculating the needed current and voltage. While they gained knowledge on transistor circuits, the group still needs to resolve the power supply issue to balance the demands of all parts. Next steps are to determine the voltage to be used.
Prasenjit adhikary resume
Prasenjit Adhikary has over 10 years of experience in PLC automation, project management, electrical power systems, and instrumentation. He has worked on numerous power plant projects in India, holding roles such as Deputy Manager and Assistant Manager. Currently, he is a graduate assistant at the University of Bridgeport where he is pursuing a Master's in Electrical Engineering, expected to graduate in 2017. He has expertise in PLC programming languages such as Allen Bradley RSLogix500 and Mitsubishi GX Developer.
Recommended
Weekly report 3
The weekly report summarizes the progress of a multidisciplinary workshop group. It discusses that the student completed the LED function for their part of the project and helped recheck circuits on the PCB board for other group members. It was challenging to combine all parts into the final product due to the time it took. Next steps include preparation for the presentation.
54261510.
This weekly report summarizes the progress of the Instinct group in the multidisciplinary workshop. It discusses the members working on the LED and gas sensor components. It notes the strong point of their work being better performance and accessibility for elderly users. However, the weak point is the device structure not being designed for all foods. Next week the report's author will continue developing and working with the team.
GYAN PRAKASH RESS(1)
Gyan Prakash is seeking a challenging position in the electrical/power industry that allows for innovation, creativity, and continuous learning. He has over 5 years of experience in installation, commissioning, project management, and maintenance of electrical equipment including PV modules, inverters, and transformers. He holds a B.Tech degree in electrical engineering and has experience working with Microsoft Windows and Office software.
54261507 281 4
1) The report provides an update on the weekly progress of the Instinct group's product design project.
2) This week, the student assembled the circuit and improved the design from the first version, testing the sensor's sensitivity and accuracy with different food wastes.
3) Engineering analysis found that the sensor has high precision without uncertainty according to its datasheet, though integrating the circuit into the machine still needs work.
CV
Indrasen Reddy is a mechanical engineer seeking a challenging position where he can learn new skills and contribute to an organization. He has a BE in Mechanical Engineering with 64% aggregate from Vishweshwarai Technological University. He currently works as an Assistant Design Engineer at Getech Equipments International Pvt Ltd, where his responsibilities include preparing drawings, manuals, and sizing equipment for mining rigs using AutoCAD, SolidWorks, and other software. He also has experience with a one-month project developing a device to convert wind and wave energy into electrical energy.
Jude_Resume_Technical
P. Jude Kingsly has over 10 years of experience in solar power project design and execution. He holds a Bachelor's degree in Electronics and Communication Engineering and has worked in roles such as Trainee Engineer, Design Engineer, and Project Manager developing solar photovoltaic systems, solar DC microgrids, and uninterrupted DC power projects. Currently he works as a Project Manager at Cygni Energy Pvt Ltd handling the design and implementation of various solar power projects.
Weekly report 1
This weekly report summarizes the progress of a student group working on a mosquito killing machine product. In the report, the student discusses having issues with the power supply not providing enough current for all parts of the product, including the LED function they are working on. The student learned it is better to design based on the desired power of the LED first before calculating the needed current and voltage. While they gained knowledge on transistor circuits, the group still needs to resolve the power supply issue to balance the demands of all parts. Next steps are to determine the voltage to be used.
Prasenjit adhikary resume
Prasenjit Adhikary has over 10 years of experience in PLC automation, project management, electrical power systems, and instrumentation. He has worked on numerous power plant projects in India, holding roles such as Deputy Manager and Assistant Manager. Currently, he is a graduate assistant at the University of Bridgeport where he is pursuing a Master's in Electrical Engineering, expected to graduate in 2017. He has expertise in PLC programming languages such as Allen Bradley RSLogix500 and Mitsubishi GX Developer.
CV-KHUWAJA ASAD KHAN
Khuwaja Asad Khan's curriculum vitae outlines his education and work experience as an electrical engineer in the United Arab Emirates and India. He holds a diploma in electrical engineering from Aligarh Muslim University and has over 15 years of experience working on electrical installation and maintenance projects for companies such as Al Sabbah Electromechanical Est., Shimizu Corporation India Pvt. Ltd., Avaids Technovators Pvt. Ltd., and Sterling & Wilson Private Ltd. Currently, he works as an electrical engineer for Al Sabbah Electromechanical Est. on the Abu Dhabi Marina Bloom Development in Abu Dhabi, UAE.
B.E in electrical engineering with 6 years experience
- Umang Kumar Goyal is seeking a challenging position to further his 6 years of experience in electrical engineering projects including commissioning diesel generators and electrical work for buildings.
- He currently works as a Project Engineer and has previous experience as a Site Engineer and Assistant Electrical Engineer, handling projects in electrical distribution, lighting, cable laying, and generator installation and maintenance.
- He has skills in project monitoring, electrical drawings, safety, and report preparation and holds a B.E. in Electrical Engineering with experience in power plants, transformer equipment, and grid distribution.
Asdasdasdasdasd
This weekly report summarizes the progress of the Instinct design group working on two projects - a practice poise training equipment to help the elderly rise from a chair safely, and a food waste measurement system. This week, the group visited Bangkuntien to learn about PCB programs. They also discussed both projects, with the poise equipment using sensors to detect when a user starts to rise from a chair to trigger assistance, and the food waste system using gas sensors to detect bacteria and warn of spoilage based on gas levels. Next week, the group will present their project at Toshiba.
Sampat resume
Sampat Hiranwal is seeking a job and provides his resume over 2 pages. He completed his B.Tech in Electrical and Electronics Engineering from Rajasthan Technical University with 67.31% and has experience with 45 days of project and industry training on PLC. He is enthusiastic about work and enjoys facing new challenges. He is fluent in Hindi, English, and has basic skills in Gujarati and Punjabi.
Prasenjit adhikary resume
Prasenjit Adhikary has over 10 years of experience in PLC automation, project management, electrical systems, and instrumentation. He has worked on numerous power plant projects in India as Deputy Manager and Assistant Manager. Currently, he is a Graduate Assistant at the University of Bridgeport where he is working on a position control project using an Allen Bradley PLC. He has strong skills in PLC programming, HMI development, electrical systems, and communication protocols.
54261528 3
This weekly report summarizes the progress of the Habithai engineering team. It discusses designing integrated circuits and a printed circuit board to step down voltages for other circuits. Testing the integrated circuits was unsuccessful because the firmware was not installed, preventing the computer from recognizing the circuit. The report outlines next steps of placing circuits inside a machine.
Infografia: Sage Business Index: resultados en España
Sage Business Index: resultados en España. Más información en http://www.sage.es/recursos-de-negocio/biblioteca-empresarial/tabs/infografias/sage-business-index-resultados
Serie fichaexport
Este documento presenta los resultados de encuestas realizadas en España sobre el grado de confianza de la población en la monarquía desde 1994 hasta 2013. Muestra los porcentajes de personas que respondieron en una escala del 0 al 10 su nivel de confianza en diferentes periodos, con una media inicial de 7,46 descendiendo a 3,68 en el último periodo. También incluye el número de encuestados y desviación típica para cada periodo.
Volante
La escala de prioridades para el trabajo incluye la confianza, la autonomía y la dedicación como los elementos más importantes, seguidos de cerca por el compromiso, la comunicación y la responsabilidad.
Confiabilidad y validez
Este documento presenta los principales requisitos y métodos para la recolección de datos en investigación, incluyendo la validez, confiabilidad, observación, entrevistas y cuestionarios. Explica que la validez y confiabilidad son fundamentales y deben ser calculadas, y que existen diferentes tipos de entrevistas y sus características, así como factores que afectan la validez y confiabilidad de los instrumentos.
Apgar diapositivas completas
Este documento proporciona información sobre el Test de Apgar y su importancia en el desarrollo motor de los recién nacidos. Explica que el Test de Apgar evalúa cinco signos vitales del recién nacido (color, frecuencia cardíaca, esfuerzo respiratorio, tono muscular y reflejos) y les asigna una puntuación de 0 a 2. Una puntuación total de 7 a 10 puntos se considera normal, de 4 a 7 requiere atención especial y de 0 a 3 puntos tiene altos porcentajes de mortalidad. Tamb
Escala likert
Exposición sobre escala de Likert.
Solange Zambrano
Laura Otaiza
Faviola Pabón
Linda Palencia
MEIDI Cohorte VII
Psicometría
Este documento presenta un resumen de la historia y conceptos fundamentales de la psicometría. Brevemente describe hitos históricos como las primeras pruebas en China en 1115 a.C. y la escala de inteligencia de Binet-Simon en 1905. Explica conceptos como validez, confiabilidad, tipos de pruebas e ítems, y modelos de medición como la Teoría Clásica de Tests y Teoría de Respuesta al Ítem. Finalmente, diferencia psicometría de evaluación psicológica enfocándose la
Presentación de Validez y Confiabilidad
Este documento trata sobre los conceptos de medición, instrumentos de medición, y validez y confiabilidad en investigación cuantitativa. Brevemente resume que la medición implica asignar valores a variables, y los instrumentos de medición deben cumplir con criterios de validez, confiabilidad y objetividad. Explica los tipos de validez como validez de contenido, criterio y constructo, y métodos para medir la confiabilidad como test-retest, formas paralelas, coeficiente alfa de Cronbach y split-halves.
Validez y confiabilidad de instrumentos de medición en investigación cuantita...
Presentación en formato power point sobre La Validez y Confiabilidad de los instrumentos de medición en una investigación científica, exigido por pensum de estudios de la maestría en Gerencia de Finanzas y de los Negocios, cuyo profesor titular es el Msc. Leonardo Castillo, Universidad Yacambu, Barquisimeto, Estado Lara, Venezuela.
ESCALAS Y SCORES EN CUIDADOS INTENSIVOS
El incluir nuevas herramientas como son las escalas permitirá mejorar el cuidado del paciente, valorar la distribución enfermero/paciente permitiendo hacer reevaluación y retroalimentación de la información generada.
Weekly report hack
The weekly report discusses progress on a project involving an unstable fan and sensor issues. The fan was not working properly due to a voltage issue from the power supply not connecting to the motor on the PCB board. The sensor was also unstable. Both issues were resolved by modifying the PCB board. Photos of components and information were collected for a report. Strengths included completing assigned tasks and helping teammates. The challenge was integrating all parts within the time. The next week's task is a presentation.
Weekly report template5
This weekly report summarizes the progress of group "Fuang" in designing an electric kettle. The engineering team studied the design process and product elements. They are learning microcontroller programming to control the kettle. Next week, the team will apply their learning to other electrical appliances. The group is still working to resolve design and life cycle issues for the optimal kettle design.
54261510 3
This weekly report summarizes the progress of a student group called Instinct working on a multidisciplinary engineering project. In the last week of the project, the student bought a device and battery but had limited time to work due to a job. They helped friends with battery charging and soldering a microcontroller programmed to connect to a sound chip. The circuit design is small and portable but uses cumbersome cables and has difficult soldering. Next week, the student will further develop the project and work with their team.
54261526
The engineering team worked on circuit design and PCB layout this week. They tested circuits using a program and an actual PCB. Figures 1 and 2 show the 3D model and layout of the PCB. Strengths included circuit design and calculation skills. Weaknesses included a lack of free time. Next week's work will include adding devices to the PCB and testing the circuit.
Inc2812
This weekly report discusses progress made in an engineering multidisciplinary workshop. The student replaced the power transformer with an adapter to provide enough power for the circuit to operate properly with the machine. While the PCB assembly had some errors, the overall job will be completed next week. The report provides an update on a circuit power issue solved by changing the power source, along with next steps to finish the project.
54261517_4
This weekly report discusses progress made in an engineering multidisciplinary workshop. The student reports changing the circuit power from a transformer to an adapter to provide enough power for circuit and machine operation. Engineering analysis found the strong point was beginning circuit and machine operation, while a weak point was errors in the assembled PCB requiring fixes. The next week's job is to complete the work.
More Related Content
What's hot
CV-KHUWAJA ASAD KHAN
Khuwaja Asad Khan's curriculum vitae outlines his education and work experience as an electrical engineer in the United Arab Emirates and India. He holds a diploma in electrical engineering from Aligarh Muslim University and has over 15 years of experience working on electrical installation and maintenance projects for companies such as Al Sabbah Electromechanical Est., Shimizu Corporation India Pvt. Ltd., Avaids Technovators Pvt. Ltd., and Sterling & Wilson Private Ltd. Currently, he works as an electrical engineer for Al Sabbah Electromechanical Est. on the Abu Dhabi Marina Bloom Development in Abu Dhabi, UAE.
B.E in electrical engineering with 6 years experience
- Umang Kumar Goyal is seeking a challenging position to further his 6 years of experience in electrical engineering projects including commissioning diesel generators and electrical work for buildings.
- He currently works as a Project Engineer and has previous experience as a Site Engineer and Assistant Electrical Engineer, handling projects in electrical distribution, lighting, cable laying, and generator installation and maintenance.
- He has skills in project monitoring, electrical drawings, safety, and report preparation and holds a B.E. in Electrical Engineering with experience in power plants, transformer equipment, and grid distribution.
Asdasdasdasdasd
This weekly report summarizes the progress of the Instinct design group working on two projects - a practice poise training equipment to help the elderly rise from a chair safely, and a food waste measurement system. This week, the group visited Bangkuntien to learn about PCB programs. They also discussed both projects, with the poise equipment using sensors to detect when a user starts to rise from a chair to trigger assistance, and the food waste system using gas sensors to detect bacteria and warn of spoilage based on gas levels. Next week, the group will present their project at Toshiba.
Sampat resume
Sampat Hiranwal is seeking a job and provides his resume over 2 pages. He completed his B.Tech in Electrical and Electronics Engineering from Rajasthan Technical University with 67.31% and has experience with 45 days of project and industry training on PLC. He is enthusiastic about work and enjoys facing new challenges. He is fluent in Hindi, English, and has basic skills in Gujarati and Punjabi.
Prasenjit adhikary resume
Prasenjit Adhikary has over 10 years of experience in PLC automation, project management, electrical systems, and instrumentation. He has worked on numerous power plant projects in India as Deputy Manager and Assistant Manager. Currently, he is a Graduate Assistant at the University of Bridgeport where he is working on a position control project using an Allen Bradley PLC. He has strong skills in PLC programming, HMI development, electrical systems, and communication protocols.
54261528 3
This weekly report summarizes the progress of the Habithai engineering team. It discusses designing integrated circuits and a printed circuit board to step down voltages for other circuits. Testing the integrated circuits was unsuccessful because the firmware was not installed, preventing the computer from recognizing the circuit. The report outlines next steps of placing circuits inside a machine.
What's hot (6)
B.E in electrical engineering with 6 years experience
B.E in electrical engineering with 6 years experience
Viewers also liked
Infografia: Sage Business Index: resultados en España
Sage Business Index: resultados en España. Más información en http://www.sage.es/recursos-de-negocio/biblioteca-empresarial/tabs/infografias/sage-business-index-resultados
Serie fichaexport
Este documento presenta los resultados de encuestas realizadas en España sobre el grado de confianza de la población en la monarquía desde 1994 hasta 2013. Muestra los porcentajes de personas que respondieron en una escala del 0 al 10 su nivel de confianza en diferentes periodos, con una media inicial de 7,46 descendiendo a 3,68 en el último periodo. También incluye el número de encuestados y desviación típica para cada periodo.
Volante
La escala de prioridades para el trabajo incluye la confianza, la autonomía y la dedicación como los elementos más importantes, seguidos de cerca por el compromiso, la comunicación y la responsabilidad.
Confiabilidad y validez
Este documento presenta los principales requisitos y métodos para la recolección de datos en investigación, incluyendo la validez, confiabilidad, observación, entrevistas y cuestionarios. Explica que la validez y confiabilidad son fundamentales y deben ser calculadas, y que existen diferentes tipos de entrevistas y sus características, así como factores que afectan la validez y confiabilidad de los instrumentos.
Apgar diapositivas completas
Este documento proporciona información sobre el Test de Apgar y su importancia en el desarrollo motor de los recién nacidos. Explica que el Test de Apgar evalúa cinco signos vitales del recién nacido (color, frecuencia cardíaca, esfuerzo respiratorio, tono muscular y reflejos) y les asigna una puntuación de 0 a 2. Una puntuación total de 7 a 10 puntos se considera normal, de 4 a 7 requiere atención especial y de 0 a 3 puntos tiene altos porcentajes de mortalidad. Tamb
Escala likert
Exposición sobre escala de Likert.
Solange Zambrano
Laura Otaiza
Faviola Pabón
Linda Palencia
MEIDI Cohorte VII
Psicometría
Este documento presenta un resumen de la historia y conceptos fundamentales de la psicometría. Brevemente describe hitos históricos como las primeras pruebas en China en 1115 a.C. y la escala de inteligencia de Binet-Simon en 1905. Explica conceptos como validez, confiabilidad, tipos de pruebas e ítems, y modelos de medición como la Teoría Clásica de Tests y Teoría de Respuesta al Ítem. Finalmente, diferencia psicometría de evaluación psicológica enfocándose la
Presentación de Validez y Confiabilidad
Este documento trata sobre los conceptos de medición, instrumentos de medición, y validez y confiabilidad en investigación cuantitativa. Brevemente resume que la medición implica asignar valores a variables, y los instrumentos de medición deben cumplir con criterios de validez, confiabilidad y objetividad. Explica los tipos de validez como validez de contenido, criterio y constructo, y métodos para medir la confiabilidad como test-retest, formas paralelas, coeficiente alfa de Cronbach y split-halves.
Validez y confiabilidad de instrumentos de medición en investigación cuantita...
Presentación en formato power point sobre La Validez y Confiabilidad de los instrumentos de medición en una investigación científica, exigido por pensum de estudios de la maestría en Gerencia de Finanzas y de los Negocios, cuyo profesor titular es el Msc. Leonardo Castillo, Universidad Yacambu, Barquisimeto, Estado Lara, Venezuela.
ESCALAS Y SCORES EN CUIDADOS INTENSIVOS
El incluir nuevas herramientas como son las escalas permitirá mejorar el cuidado del paciente, valorar la distribución enfermero/paciente permitiendo hacer reevaluación y retroalimentación de la información generada.
Viewers also liked (10)
Infografia: Sage Business Index: resultados en España
Infografia: Sage Business Index: resultados en España
Validez y confiabilidad de instrumentos de medición en investigación cuantita...
Validez y confiabilidad de instrumentos de medición en investigación cuantita...
Similar to Weekly report hack
Weekly report hack
The weekly report discusses progress on a project involving an unstable fan and sensor issues. The fan was not working properly due to a voltage issue from the power supply not connecting to the motor on the PCB board. The sensor was also unstable. Both issues were resolved by modifying the PCB board. Photos of components and information were collected for a report. Strengths included completing assigned tasks and helping teammates. The challenge was integrating all parts within the time. The next week's task is a presentation.
Weekly report template5
This weekly report summarizes the progress of group "Fuang" in designing an electric kettle. The engineering team studied the design process and product elements. They are learning microcontroller programming to control the kettle. Next week, the team will apply their learning to other electrical appliances. The group is still working to resolve design and life cycle issues for the optimal kettle design.
54261510 3
This weekly report summarizes the progress of a student group called Instinct working on a multidisciplinary engineering project. In the last week of the project, the student bought a device and battery but had limited time to work due to a job. They helped friends with battery charging and soldering a microcontroller programmed to connect to a sound chip. The circuit design is small and portable but uses cumbersome cables and has difficult soldering. Next week, the student will further develop the project and work with their team.
54261526
The engineering team worked on circuit design and PCB layout this week. They tested circuits using a program and an actual PCB. Figures 1 and 2 show the 3D model and layout of the PCB. Strengths included circuit design and calculation skills. Weaknesses included a lack of free time. Next week's work will include adding devices to the PCB and testing the circuit.
Inc2812
This weekly report discusses progress made in an engineering multidisciplinary workshop. The student replaced the power transformer with an adapter to provide enough power for the circuit to operate properly with the machine. While the PCB assembly had some errors, the overall job will be completed next week. The report provides an update on a circuit power issue solved by changing the power source, along with next steps to finish the project.
54261517_4
This weekly report discusses progress made in an engineering multidisciplinary workshop. The student reports changing the circuit power from a transformer to an adapter to provide enough power for circuit and machine operation. Engineering analysis found the strong point was beginning circuit and machine operation, while a weak point was errors in the assembled PCB requiring fixes. The next week's job is to complete the work.
Weekly report template ice
This weekly report from an engineering student details progress on a multidisciplinary workshop project. It lists members of the engineering and product design teams. The circuit work is complete this week and is being checked for accuracy, especially regarding the voice component. Next steps are to complete checking and submit a report.
Weekly report template (5)
1) The engineering team from KID-WA Company includes 12 members working on product design and microwave projects.
2) In the past week, the report's author checked the PCB circuit pattern for their microwave project and found it to be lacking.
3) Figures 1 and 2 show the circuit designs, while the engineering analysis notes strengths in helping others and weaknesses in needing to re-work some circuit soldering.
Weekly report 3
1. The weekly report provides an update on the progress of an engineering team's product design project.
2. It details the completion of sensor design to measure temperature and sending the schematic circuit design to the PCB team.
3. Challenges included accidentally losing data that had to be recreated for the upcoming presentation.
Weekly report 2
This weekly report discusses progress made by an engineering team. It modified a circuit by addressing a failure in the selector circuit from not reading the datasheet. A temperature sensor was installed at a pump and the circuit and sensor were installed, though the circuit was not on a printed circuit board due to time constraints. The next steps are to present the project.
Weeklyreporttemplate3 120425042934-phpapp02
This weekly report discusses work on a product design project. The student removed old components from a microwave and checked the circuit board design. They tested connections using a multimeter to check for breaks in lines. Presentation of the project is scheduled for next week. Issues identified include potential breaks in the printed circuit board.
Weekly report template3
This weekly report discusses work done by the engineering team on a pet care product. The report indicates that this week, the team member removed old components from a microwave and checked the circuit board design and connections using a multimeter. Their next steps are to prepare a presentation. Issues identified include errors in the printed circuit board layout.
Weekly report template (5)
1) Mr. Noppadon Kaewsim submitted a weekly report for their engineering group project on developing a microwave.
2) This week, group members helped design PCB boards by using dryfilm and soldering components, though soldering small sockets was difficult.
3) Going forward, the group will focus on helping complete pending jobs for their group project.
Weekly report template 2
This weekly report summarizes the progress of a student design team working on two product concepts. The first concept was a machine for cooking and serving fast food, but designing it proved too complex and expensive. The second was an interactive food ordering display, but it did not meet user needs. For next week, the team will redesign their product to better address user requirements and create drawings of the new design. They will also research information to support the redesigned product.
Weekly report template
This weekly report discusses progress made by an engineering student group working on an automatic cooker project. The group discussed the industrial student's needs, including wanting an automatic cooker with a touch screen. The engineering team researched touch screen technology and processes. Their strengths include circuit analysis and wiring skills, while their weakness is microcontroller knowledge. Next week, they will design a circuit once the industrial students choose a single project to focus on.
Weekly report template (5)
The weekly report summarizes the progress of the KID-WA COMPANY engineering team. This week, team member Amontep Watta helped with componenting the PCB circuit board by designing and etching the copper sheet. Figures 1 and 2 show circuit designs for a refrigerator and microwave. The engineering analysis found that the circuit is not yet complete. Next week, the team will prepare for a teacher presentation and question answering.
54261507 281 3
Chutipong Kankamnanta submitted a weekly report for their group called Instinct. This week, they programmed a microcontroller connected to a sound chip and tested it until it was working properly. They then created a PCB board and installed it into the product body, checking that the circuit was complete and functioning as intended. Next week, they will create a summary and report of their work.
Weekly report template 3
The weekly report summarizes the progress of an engineering team working on an LED circuit insert for a product. In the past week, the team inserted the circuit into a PCB and measured its accuracy. This week, they will connect the circuit to other functions and test its operation within the full product before final integration. Their next steps are to address compatibility issues with the product design and continue testing.
9 feb
The weekly report discusses progress on a multidisciplinary workshop project. The ID group designed a square block product that could hold electrical appliances but the adviser found it impractical. The ID students then changed the dimensions to increase flexibility and utility. The engineering team helped analyze the design for the ID students. Their next steps are for the engineering group to research more data and meet again.
9 feb
The weekly report discusses progress on a multidisciplinary workshop project. The industrial design group designed a square block product intended to hold electrical appliances but received feedback that the design was impractical. They changed the dimensions to increase flexibility and utility. The engineering team analyzed the design and found it would be difficult to use and did not adequately support electric appliances. In the coming week, the engineering group will do more research and meet again.
Similar to Weekly report hack (20)
Recently uploaded
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Northern Engraving | Nameplate Manufacturing Process - 2024
Manufacturing custom quality metal nameplates and badges involves several standard operations. Processes include sheet prep, lithography, screening, coating, punch press and inspection. All decoration is completed in the flat sheet with adhesive and tooling operations following. The possibilities for creating unique durable nameplates are endless. How will you create your brand identity? We can help!
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Artificial Intelligence and Electronic Warfare
Artificial Intelligence and Electronic WarfarePapadakis K.-Cyber-Information Warfare Analyst & Cyber Defense/Security Consultant-Hellenic MoD
AI & Electronic WarfareJune Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...Pitangent Analytics & Technology Solutions Pvt. Ltd
Discover top-tier mobile app development services, offering innovative solutions for iOS and Android. Enhance your business with custom, user-friendly mobile applications.Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Recently uploaded (20)
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Northern Engraving | Nameplate Manufacturing Process - 2024
Northern Engraving | Nameplate Manufacturing Process - 2024
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor Ivaniuk
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Crafting Excellence: A Comprehensive Guide to iOS Mobile App Development Serv...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
Weekly report hack
- 1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] May 2, 2012 Name-Surname Vorapol charoenkitwasin Student ID. 53219008 Group Name Habithai Engineering Hack,top,U,Knight,tos,O,Art,Boon,Arm,Ball,Ball Team Members Product Design P”pete,P”ice,P”pae,P”tuang Team Members Weekly Progress On this week, my part is already to use. By I am install power supply into product by helped architecture. Now my power supply can send the power to every part of device in my product. Then refinished in my part I got to help my team by help to compound every part of product and I have cooperation with architecture PCB Power Circuit Device supply circuit Engineering Analysis Strong Point -My part is completely. -I help my team and architecture. Week Point -It hard to compound every part into product by spend time to much. Next Week Job -Presentation at bangkuntain. Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI