wb5-2
•
0 likes•157 views
This document discusses telecommunications cable installations and telecommunication earthing systems. It outlines 4 different bonding methods for connecting telecommunications cables to grounding systems to protect equipment from surges and faults. The document compares different techniques for bonding cables to earthing systems for safety and signal integrity.
Report
Share
Report
Share
Recommended
IRJET- Analysis of Nonlinearities in Fiber While Supporting 5G
This document analyzes nonlinearities in optical fiber transmission while supporting 5G networks. It discusses how four wave mixing (FWM) introduces unwanted signals in fiber transmission. It models the transmission of signals using direct modulation, Mach-Zehnder modulation, and optical phase modulation over distances of 10-50 km. The signals are then amplified and analyzed. Simulation results show that FWM crosstalk increases with input power and transmission distance. Electrical spectrum analysis also reveals additional harmonic and intermodulation terms introduced by FWM.
Wll implant training
This document discusses various topics related to wireless communication including:
1. The electromagnetic spectrum and different frequency ranges including radio, microwave, infrared, visible light, UV rays, X-rays, and gamma rays.
2. Antenna basics and properties of EM waves such as carrying energy and momentum, propagating through oscillating electric and magnetic fields, and traveling at the speed of light.
3. Examples of radio communication services including AM/FM, walkie-talkies, GSM, WiFi, satellites, and wireless local loop technologies.
4. Multiple access techniques for wireless networks such as TDMA, FDMA, and CDMA are discussed along with CDMA evolution and differences between GSM
Performance Analysis and Power Optimization for Optical Link Using Different ...
This document analyzes the performance of an optical fiber link using different modulation techniques. It simulates a 40 Gbps optical link using Return-to-Zero (RZ) and Non-Return-to-Zero (NRZ) modulation over distances of 100-300 km. The performance is analyzed based on eye diagrams, Q-factor, and bit error rate. The results show that RZ modulation provides better performance than NRZ, with higher Q-factors and clearer eye openings as the transmission distance increases. RZ is better suited than NRZ for high-speed optical communication systems using single-mode fiber.
Introduction to I C TIN JNIOR HIGH SCHOOL IN GHANA by Ghadafi
The Internet has some disadvantages such as privacy and security issues, as personal information can be stolen; it can be addictive as people can spend too much time online; and it has replaced more personal forms of communication with impersonal messages.
Industrial seminnar
This document discusses optical fiber communication and its components. It describes how optical fiber communication works using total internal reflection to transmit voice, video and other signals through fiber optic cables. The key components of an optical fiber communication system are the transmitter, light source, fiber optic cable, detector and receiver circuit. Advantages of optical fiber include high bandwidth, long transmission distances, immunity to electromagnetic interference and security. Some disadvantages are limited transmission distances without repeaters and difficulty bending or twisting the fibers. Applications include telecommunications, networking, medical uses, and industrial applications.
Enhancing FSO Link Performance in Turbulent Environment using Fiber Bundle Ba...
This document describes a simulation study investigating the use of a fiber bundle-based receiver design to improve the performance of free-space optical (FSO) communication links in turbulent atmospheric environments. The fiber bundle receiver consists of a hexagonal array of fibers that allows more optical power to be collected compared to a standard single-fiber receiver, helping to mitigate power fluctuations caused by turbulence. Simulation results showed that the fiber bundle receiver design can provide some reduction in bit error rate and increase in Q-factor for FSO links operating under different turbulence conditions compared to a standard receiver design.
IRJET- Reduction of Dispersion using FBG in Fiber Optic Communication
This document discusses reducing dispersion in fiber optic communication systems using fiber Bragg gratings (FBG). It begins by describing some of the challenges of signal degradation over long distances in fiber optic transmission, including attenuation, dispersion, and nonlinear effects. Dispersion causes pulse broadening and is a significant effect. FBG is commonly used to compensate for chromatic dispersion due to its low cost and insertion loss. The document simulates different fiber optic communication system configurations using FBG and dispersion compensation fiber to analyze parameters like bit error rate at various transmission powers. It analyzes pre, post and symmetrical dispersion compensation techniques. Results show FBG provides better dispersion compensation compared to DCF. The document also discusses using optical add-drop multiplexing to
Internet Access Via Cable Network
Cable modems allow high-speed internet access over existing cable TV networks. A cable modem connects a computer to the cable network via Ethernet, converting signals for transmission. It receives a signal from the cable network and provides internet access to connected devices. Cable modems isolate TV and internet signals to avoid interference, using different frequencies for each. Accessing the internet through cable has advantages like high speeds and using existing infrastructure, but disadvantages include limited availability and security risks.
Recommended
IRJET- Analysis of Nonlinearities in Fiber While Supporting 5G
This document analyzes nonlinearities in optical fiber transmission while supporting 5G networks. It discusses how four wave mixing (FWM) introduces unwanted signals in fiber transmission. It models the transmission of signals using direct modulation, Mach-Zehnder modulation, and optical phase modulation over distances of 10-50 km. The signals are then amplified and analyzed. Simulation results show that FWM crosstalk increases with input power and transmission distance. Electrical spectrum analysis also reveals additional harmonic and intermodulation terms introduced by FWM.
Wll implant training
This document discusses various topics related to wireless communication including:
1. The electromagnetic spectrum and different frequency ranges including radio, microwave, infrared, visible light, UV rays, X-rays, and gamma rays.
2. Antenna basics and properties of EM waves such as carrying energy and momentum, propagating through oscillating electric and magnetic fields, and traveling at the speed of light.
3. Examples of radio communication services including AM/FM, walkie-talkies, GSM, WiFi, satellites, and wireless local loop technologies.
4. Multiple access techniques for wireless networks such as TDMA, FDMA, and CDMA are discussed along with CDMA evolution and differences between GSM
Performance Analysis and Power Optimization for Optical Link Using Different ...
This document analyzes the performance of an optical fiber link using different modulation techniques. It simulates a 40 Gbps optical link using Return-to-Zero (RZ) and Non-Return-to-Zero (NRZ) modulation over distances of 100-300 km. The performance is analyzed based on eye diagrams, Q-factor, and bit error rate. The results show that RZ modulation provides better performance than NRZ, with higher Q-factors and clearer eye openings as the transmission distance increases. RZ is better suited than NRZ for high-speed optical communication systems using single-mode fiber.
Introduction to I C TIN JNIOR HIGH SCHOOL IN GHANA by Ghadafi
The Internet has some disadvantages such as privacy and security issues, as personal information can be stolen; it can be addictive as people can spend too much time online; and it has replaced more personal forms of communication with impersonal messages.
Industrial seminnar
This document discusses optical fiber communication and its components. It describes how optical fiber communication works using total internal reflection to transmit voice, video and other signals through fiber optic cables. The key components of an optical fiber communication system are the transmitter, light source, fiber optic cable, detector and receiver circuit. Advantages of optical fiber include high bandwidth, long transmission distances, immunity to electromagnetic interference and security. Some disadvantages are limited transmission distances without repeaters and difficulty bending or twisting the fibers. Applications include telecommunications, networking, medical uses, and industrial applications.
Enhancing FSO Link Performance in Turbulent Environment using Fiber Bundle Ba...
This document describes a simulation study investigating the use of a fiber bundle-based receiver design to improve the performance of free-space optical (FSO) communication links in turbulent atmospheric environments. The fiber bundle receiver consists of a hexagonal array of fibers that allows more optical power to be collected compared to a standard single-fiber receiver, helping to mitigate power fluctuations caused by turbulence. Simulation results showed that the fiber bundle receiver design can provide some reduction in bit error rate and increase in Q-factor for FSO links operating under different turbulence conditions compared to a standard receiver design.
IRJET- Reduction of Dispersion using FBG in Fiber Optic Communication
This document discusses reducing dispersion in fiber optic communication systems using fiber Bragg gratings (FBG). It begins by describing some of the challenges of signal degradation over long distances in fiber optic transmission, including attenuation, dispersion, and nonlinear effects. Dispersion causes pulse broadening and is a significant effect. FBG is commonly used to compensate for chromatic dispersion due to its low cost and insertion loss. The document simulates different fiber optic communication system configurations using FBG and dispersion compensation fiber to analyze parameters like bit error rate at various transmission powers. It analyzes pre, post and symmetrical dispersion compensation techniques. Results show FBG provides better dispersion compensation compared to DCF. The document also discusses using optical add-drop multiplexing to
Internet Access Via Cable Network
Cable modems allow high-speed internet access over existing cable TV networks. A cable modem connects a computer to the cable network via Ethernet, converting signals for transmission. It receives a signal from the cable network and provides internet access to connected devices. Cable modems isolate TV and internet signals to avoid interference, using different frequencies for each. Accessing the internet through cable has advantages like high speeds and using existing infrastructure, but disadvantages include limited availability and security risks.
Microwave backhaul in 5 g networks
1) Microwave backhaul is a viable solution to support the high capacity, reliability, and low latency requirements of 5G networks. E-band usage and multi-band combinations will allow microwave to support capacities of 100Gbps.
2) Microwave currently provides backhaul for over 65% of networks worldwide and this percentage is expected to remain steady as microwave evolves to support 5G capacities. While fiber is used for core networks, microwave is well-suited for long haul and remote backhaul where fiber deployment is challenging.
3) The spectrum used by microwave will transform significantly for 5G, utilizing higher bands such as E, W, and D bands that support 5G throughput needs, while lower bands
IRJET - Performance Comparision of 5G – 28Ghz Signal Transmission Over FS...
This document presents a performance comparison of 5G signal transmission at 28GHz over a free space optical (FSO) link using different modulation techniques (BPSK, FSK, OOK) under dusty weather conditions. It first experimentally analyzes the impact of dust storms on the performance of an all-optical FSO link carrying modulated 5G signals. Results show the link is significantly affected at low visibility ranges. It then compares the effects of dust on parallel FSO and radio frequency links, showing dust has negligible impact on the RF link. Finally, it analyzes a hybrid cascaded FSO/RF link in terms of bit-error-rate and eye diagram under dusty conditions. The study aims to evaluate FSO and
Maximising system throughput in wireless powered sub-6 GHz and millimetre-wav...
Millimetre wave (mm-Wave) bands and sub-6 GHz are key technologies in solving the spectrum critical situation in the fifth generation (5G) wireless networks in achieving high throughput with low transmission power. This paper studies the performance of dense small cells that involve a millimetre wave (mm-Wave) band and sub-6 GHz that operate in high frequency to support massive multiple-input-multiple-output systems (MIMO). In this paper, we analyse the propagation path loss and wireless powered transfer for a 5G wireless cellular system from both macro cells and femtocells in the sub-6 GHz (μWave) and mm-Wave tiers. This paper also analyses the tier heterogeneous in downlink for both mm-Wave and sub-6 GHz. It further proposes a novel distributed power to mitigate the inter-beam interference directors and achieve high throughput under game theory-based power constraints across the sub-6 GHz and mm-Wave interfaces. From the simulation results, the proposed distributed powers in femtocell suppresses inter-beam interference by minimising path loss to active users (UEs) and provides substantial power saving by controlling the distributed power algorithm to achieve high throughput.
Chapter 7
The document discusses different types of transmission media, including guided and unguided media. Guided media includes twisted-pair cable, coaxial cable, and fiber-optic cable, which provide a physical conduit for transmission. Unguided media is wireless communication using electromagnetic waves without a physical conductor, including radio waves, microwaves, and infrared signals. Wireless uses electromagnetic spectrum bands and antennas for propagation.
3G presentation.
3G, or third generation mobile telecommunications, supports information transfer rates of at least 200 Kbit/s and provides higher speeds than previous 2G technologies. The two main 3G standards are UMTS, used primarily in Europe and standardized by 3GPP, and CDMA2000, used in North America and South Korea. 3G enabled rapid growth in data traffic such as text and web access through mobile phones, with projections of 50% of total mobile traffic consisting of data within 5 years of its introduction. It also facilitated increased mobile internet and device penetration.
5G antenna array architecture
This article discusses the high-level design principles behind 5G antenna array architecture MIMO and beamforming technology to meet the requirements of 5G NR systems.
The higher the carrier frequency, the path loss will increase significantly relative to the fixed antenna size of the wavelength. A smaller antenna size at a higher carrier frequency means that more antennas are installed in the same area.
The path loss caused by the increase in carrier frequency can be overcome by using more antennas without increasing the overall physical size of the 5G antenna array.
In addition, when the carrier frequency increases above about 10 GHz, diffraction will no longer be the main propagation mechanism. Above 10Ghz, reflection and scattering will be the most important transmission mechanisms for non-line-of-sight transmission links.
L 1 overview of telecom network
This document provides an overview of telecommunication networks. It discusses the evolution of transmission systems from open wire carriers to current optical fiber systems. It also describes key concepts in telecommunications including the decibel unit for measuring signal power, classification of networks by geography into access, metro and core networks, and common topologies of rings and meshes. The objective is to understand the basics of telecom networks and their building blocks.
INTERNET ACCESS VIA CABLE TV
Making use of available resources is very essential in growing technology. Internet Access provided to multiple pcs may possible by use a single cable TV Network we can watch Television simultaneously.
Transmitting audio via fiber optics under nonlinear effects and optimized tun...
The ability of fiber optic to overcome the signal transmission problems is making it a dominant transmission medium. Despite of this major positive attribute of optic fibers, there is still a downside for using the fiber optic communication; that is the nonlinearity problem. For the first time, a design of an audio signal is suggested and executed in MATLAB with integration with OptiSystem TM Software .The audio signal then transmitted in different shapes of modulation signals (NRZ, RZ, & RC) for different distances (100 km & 75 km) via a fiber optic media to be received in a receiving part of the simulated system. Three tests are used to do so. The first is the Quality-facto (Q-Factor) against the received power, second test is eye diagram performance and finally is the measuring of the amplitude of output (received) signal for each modulation signal shape using the Oscilloscope Visualizer. The NZR modulation signal was found to be the best one of the three used signals’ types in all three tests. The Q-factor for NRZ pulse shape (=12) was higher than that for RZ (=10) and RC (=8) for a 100 km distance at the same received power level.
Advance in optical fiber amplifier
This document discusses recent advances in optical fiber amplifiers. Key points include:
1. Erbium-doped fiber amplifiers (EDFAs) have increased in bandwidth from 35nm to over 80nm, enabling higher capacity WDM systems.
2. Raman fiber amplifiers provide even wider bandwidth amplification.
3. Control schemes have been developed to mitigate fast power transients in amplifier chains caused by network reconfigurations.
4. Advances include wider bandwidth EDFAs combining C-band and L-band amplification, automatic gain control, and techniques to protect signal channels during network changes.
wb2-2
This document discusses the components and line constants involved in telecommunications cable installations. It covers the topics of shielding, inductance, conductance, resistance, capacitance, and factors that can affect cables like heating and radiation. Proper shielding and understanding line constants such as inductance, resistance, and capacitance are important for effective telecommunications cable installations.
2. Heat Transfer3
Convection heating works by circulating hot air around a room through vents. Warm air rises and cooler air is pulled in through lower vents, creating an airflow that distributes heat evenly throughout the space. Convection heating systems are a popular option that use fans or blowers to efficiently transfer heat from the source to wherever it is needed in the home.
5.2.2meters
The poll had a wide margin of error, meaning the results could differ significantly from the actual opinions of the population. With such a large potential error rate, it is difficult to draw strong conclusions from the poll's findings. More accurate polling would be needed to say with confidence what percentage of people support or oppose any particular candidate or issue.
1. Review2
This document provides an example calculation for the heat generated by a jug element. The jug element draws 10 amps for 10 seconds at 230 volts. Using the formula heat = current squared x resistance x time, the calculation shows the heat generated is 23,000 joules or 23 kilojoules.
5-1
This document discusses different types of transformers used in electrical systems, including single and three phase transformers, potential transformers (PT or VT) that step down high voltages for measurement, current transformers that reduce high currents for measurement, and how potential (PT) and current (VT) transformers connect to instruments.
1.4voltage
This document discusses electrical concepts related to touch and fault protection. It mentions touch current and voltage, as well as impedance, induced voltage, and insulation properties like creepage and dielectric strength. Safety from electrical faults may involve reducing touch currents, increasing impedance, and improving insulation.
6-1
This document discusses different connection methods for single-phase and three-phase transformers, including connecting single-phase transformers, phase shifts in three-phase connections, and the star-star, delta-star, and delta connections used for three-phase transformers.
More Related Content
What's hot
Microwave backhaul in 5 g networks
1) Microwave backhaul is a viable solution to support the high capacity, reliability, and low latency requirements of 5G networks. E-band usage and multi-band combinations will allow microwave to support capacities of 100Gbps.
2) Microwave currently provides backhaul for over 65% of networks worldwide and this percentage is expected to remain steady as microwave evolves to support 5G capacities. While fiber is used for core networks, microwave is well-suited for long haul and remote backhaul where fiber deployment is challenging.
3) The spectrum used by microwave will transform significantly for 5G, utilizing higher bands such as E, W, and D bands that support 5G throughput needs, while lower bands
IRJET - Performance Comparision of 5G – 28Ghz Signal Transmission Over FS...
This document presents a performance comparison of 5G signal transmission at 28GHz over a free space optical (FSO) link using different modulation techniques (BPSK, FSK, OOK) under dusty weather conditions. It first experimentally analyzes the impact of dust storms on the performance of an all-optical FSO link carrying modulated 5G signals. Results show the link is significantly affected at low visibility ranges. It then compares the effects of dust on parallel FSO and radio frequency links, showing dust has negligible impact on the RF link. Finally, it analyzes a hybrid cascaded FSO/RF link in terms of bit-error-rate and eye diagram under dusty conditions. The study aims to evaluate FSO and
Maximising system throughput in wireless powered sub-6 GHz and millimetre-wav...
Millimetre wave (mm-Wave) bands and sub-6 GHz are key technologies in solving the spectrum critical situation in the fifth generation (5G) wireless networks in achieving high throughput with low transmission power. This paper studies the performance of dense small cells that involve a millimetre wave (mm-Wave) band and sub-6 GHz that operate in high frequency to support massive multiple-input-multiple-output systems (MIMO). In this paper, we analyse the propagation path loss and wireless powered transfer for a 5G wireless cellular system from both macro cells and femtocells in the sub-6 GHz (μWave) and mm-Wave tiers. This paper also analyses the tier heterogeneous in downlink for both mm-Wave and sub-6 GHz. It further proposes a novel distributed power to mitigate the inter-beam interference directors and achieve high throughput under game theory-based power constraints across the sub-6 GHz and mm-Wave interfaces. From the simulation results, the proposed distributed powers in femtocell suppresses inter-beam interference by minimising path loss to active users (UEs) and provides substantial power saving by controlling the distributed power algorithm to achieve high throughput.
Chapter 7
The document discusses different types of transmission media, including guided and unguided media. Guided media includes twisted-pair cable, coaxial cable, and fiber-optic cable, which provide a physical conduit for transmission. Unguided media is wireless communication using electromagnetic waves without a physical conductor, including radio waves, microwaves, and infrared signals. Wireless uses electromagnetic spectrum bands and antennas for propagation.
3G presentation.
3G, or third generation mobile telecommunications, supports information transfer rates of at least 200 Kbit/s and provides higher speeds than previous 2G technologies. The two main 3G standards are UMTS, used primarily in Europe and standardized by 3GPP, and CDMA2000, used in North America and South Korea. 3G enabled rapid growth in data traffic such as text and web access through mobile phones, with projections of 50% of total mobile traffic consisting of data within 5 years of its introduction. It also facilitated increased mobile internet and device penetration.
5G antenna array architecture
This article discusses the high-level design principles behind 5G antenna array architecture MIMO and beamforming technology to meet the requirements of 5G NR systems.
The higher the carrier frequency, the path loss will increase significantly relative to the fixed antenna size of the wavelength. A smaller antenna size at a higher carrier frequency means that more antennas are installed in the same area.
The path loss caused by the increase in carrier frequency can be overcome by using more antennas without increasing the overall physical size of the 5G antenna array.
In addition, when the carrier frequency increases above about 10 GHz, diffraction will no longer be the main propagation mechanism. Above 10Ghz, reflection and scattering will be the most important transmission mechanisms for non-line-of-sight transmission links.
L 1 overview of telecom network
This document provides an overview of telecommunication networks. It discusses the evolution of transmission systems from open wire carriers to current optical fiber systems. It also describes key concepts in telecommunications including the decibel unit for measuring signal power, classification of networks by geography into access, metro and core networks, and common topologies of rings and meshes. The objective is to understand the basics of telecom networks and their building blocks.
INTERNET ACCESS VIA CABLE TV
Making use of available resources is very essential in growing technology. Internet Access provided to multiple pcs may possible by use a single cable TV Network we can watch Television simultaneously.
Transmitting audio via fiber optics under nonlinear effects and optimized tun...
The ability of fiber optic to overcome the signal transmission problems is making it a dominant transmission medium. Despite of this major positive attribute of optic fibers, there is still a downside for using the fiber optic communication; that is the nonlinearity problem. For the first time, a design of an audio signal is suggested and executed in MATLAB with integration with OptiSystem TM Software .The audio signal then transmitted in different shapes of modulation signals (NRZ, RZ, & RC) for different distances (100 km & 75 km) via a fiber optic media to be received in a receiving part of the simulated system. Three tests are used to do so. The first is the Quality-facto (Q-Factor) against the received power, second test is eye diagram performance and finally is the measuring of the amplitude of output (received) signal for each modulation signal shape using the Oscilloscope Visualizer. The NZR modulation signal was found to be the best one of the three used signals’ types in all three tests. The Q-factor for NRZ pulse shape (=12) was higher than that for RZ (=10) and RC (=8) for a 100 km distance at the same received power level.
Advance in optical fiber amplifier
This document discusses recent advances in optical fiber amplifiers. Key points include:
1. Erbium-doped fiber amplifiers (EDFAs) have increased in bandwidth from 35nm to over 80nm, enabling higher capacity WDM systems.
2. Raman fiber amplifiers provide even wider bandwidth amplification.
3. Control schemes have been developed to mitigate fast power transients in amplifier chains caused by network reconfigurations.
4. Advances include wider bandwidth EDFAs combining C-band and L-band amplification, automatic gain control, and techniques to protect signal channels during network changes.
What's hot (11)
IRJET - Performance Comparision of 5G – 28Ghz Signal Transmission Over FS...
IRJET - Performance Comparision of 5G – 28Ghz Signal Transmission Over FS...
Maximising system throughput in wireless powered sub-6 GHz and millimetre-wav...
Maximising system throughput in wireless powered sub-6 GHz and millimetre-wav...
Transmitting audio via fiber optics under nonlinear effects and optimized tun...
Transmitting audio via fiber optics under nonlinear effects and optimized tun...
Viewers also liked
wb2-2
This document discusses the components and line constants involved in telecommunications cable installations. It covers the topics of shielding, inductance, conductance, resistance, capacitance, and factors that can affect cables like heating and radiation. Proper shielding and understanding line constants such as inductance, resistance, and capacitance are important for effective telecommunications cable installations.
2. Heat Transfer3
Convection heating works by circulating hot air around a room through vents. Warm air rises and cooler air is pulled in through lower vents, creating an airflow that distributes heat evenly throughout the space. Convection heating systems are a popular option that use fans or blowers to efficiently transfer heat from the source to wherever it is needed in the home.
5.2.2meters
The poll had a wide margin of error, meaning the results could differ significantly from the actual opinions of the population. With such a large potential error rate, it is difficult to draw strong conclusions from the poll's findings. More accurate polling would be needed to say with confidence what percentage of people support or oppose any particular candidate or issue.
1. Review2
This document provides an example calculation for the heat generated by a jug element. The jug element draws 10 amps for 10 seconds at 230 volts. Using the formula heat = current squared x resistance x time, the calculation shows the heat generated is 23,000 joules or 23 kilojoules.
5-1
This document discusses different types of transformers used in electrical systems, including single and three phase transformers, potential transformers (PT or VT) that step down high voltages for measurement, current transformers that reduce high currents for measurement, and how potential (PT) and current (VT) transformers connect to instruments.
1.4voltage
This document discusses electrical concepts related to touch and fault protection. It mentions touch current and voltage, as well as impedance, induced voltage, and insulation properties like creepage and dielectric strength. Safety from electrical faults may involve reducing touch currents, increasing impedance, and improving insulation.
6-1
This document discusses different connection methods for single-phase and three-phase transformers, including connecting single-phase transformers, phase shifts in three-phase connections, and the star-star, delta-star, and delta connections used for three-phase transformers.
2. Safety Devices
Safety devices are crucial for protecting workers in hazardous environments. Personal protective equipment like hard hats, safety glasses, and steel-toed boots help prevent injury from falling or flying debris. Machinery safeguards such as guards, interlocks, and emergency stop buttons are also needed to shield workers from moving parts and ensure dangerous processes can be stopped quickly in case of an emergency.
wb3-4
This document discusses cabling installation techniques for telecommunications in different premises. It covers cabling in domestic, commercial, and industrial premises as well as cabling design and density for offices, small shops, and multi-unit dwellings. The document provides guidance on properly installing telecommunications cables in various building types.
wb1-1
This document defines common telecommunications cabling terms such as backbone cabling, horizontal cabling, cross-connects, outlets, risers, lead-in cables, pathways, topologies and work stations that are used to describe how data and voice services are delivered within buildings and campuses.
1.2issues
The document discusses minimum clearance. It refers to the minimum amount of space that must be left around and between objects. Minimum clearance is important to consider for safety and functionality, such as ensuring there is enough room for people and equipment to maneuver.
2. Automatic Control3
Simmerstat is a new statistical analysis tool that allows users to analyze large datasets. It uses machine learning techniques like natural language processing and neural networks to identify patterns and relationships in data. Simmerstat can generate summaries, visualizations, and predictive models from datasets with millions of rows in seconds, providing powerful insights for researchers, analysts, and business users.
1. Electric Water Heating1
Instantaneous water heaters heat water directly without storage tanks. They heat water on demand as it flows through the system. This makes instantaneous water heaters an efficient option that avoids wasting energy heating water that sits unused in a storage tank.
Viewers also liked (19)
More from eLearning Australia
9-2
This document discusses applying short circuits and earths to de-energized power lines. It contains information about single and three phase transformers and extracts from electrical safety regulations regarding working on de-energized lines.
9-1
This document discusses safety procedures for working with high-voltage transformers, including following proper switching procedures, using switching sheets and access permits, taking safety precautions like isolation and warning notices, and testing high voltage lines to prove they are de-energized before working on them.
8-2
This document discusses harmonics in electrical systems. It explains that harmonics are distortions in the normal sinusoidal waveform that are integer multiples of the fundamental frequency, and can be odd or even harmonics. It focuses on third harmonics which are three times the fundamental frequency, and how magnetic saturation and hysteresis can affect the current waveform by introducing distortions from harmonic components.
8-1
The document discusses phase relations in transformers, including the general format of the sine wave and how the trigonometric functions of cosine and sine are related based on phase shifts of 90 degrees, 180 degrees, and 270 degrees. Several examples are provided to illustrate phase relations between cosine and sine.
7-1
This document discusses paralleling single and three-phase transformers to increase capacity and reliability. It covers connecting transformers in parallel in both star and delta configurations and how load is divided between the transformers when they are run in parallel. Parallel operation allows for increased capacity when demand is high and continuity of supply if one transformer fails or is taken offline.
6-2
This document discusses various types of single and three phase transformers, including star delta and delta-delta connections, name plate designations for phase shift transformers, open delta transformers, providing three-phase supply from three-phase transformers, and performing polarity tests on three-phase transformers using lamps or a voltmeter.
5-2
This document discusses safe working procedures for single and three phase transformers, potential transformers, and current transformers used for Energex metering. It provides guidance on safely working with different types of transformers.
4-2
The document outlines temperature settings and signals for cooling devices like oil pumps and fans on single and three phase transformers. It provides temperature thresholds for when cooling devices turn on and off, when alarm and trip signals activate based on oil and winding temperature, and discusses different types of transformer tappings including off-circuit and on-load tap changing.
4-1
This document discusses transformer auxiliary equipment, including the conservator, breather, explosion vent, pressure relief device, Buchholtz relay, and temperature indicators. These components help monitor and regulate things like pressure, temperature, gas accumulation, and moisture levels within the transformer to protect it from damage.
3-2
This document discusses different types of transformers used in single and three phase systems, including dry type transformers and Abb resibloc transformers. It also covers different cooling methods for transformers like transformer oil cooling, and discusses the properties, testing, and replacement of transformer oil. Synthetic liquid cooling is also mentioned.
3-1
This document discusses insulation classes and temperature rise in transformers. It provides a table showing insulation classes A, B, F and H and their corresponding ambient temperature, rise by resistance, hot spot allowance, and maximum hottest spot temperature. The document also mentions reading a chapter on insulation classes and temperature rise in Jenneson's book, and covers transformer heat dissipation and methods of natural and forced cooling.
2-3
This document discusses calculating voltage regulation from short circuit tests, determining prospective fault current for single and three phase transformers, and all day efficiency of transformers. It provides information on testing and evaluating the performance of single and three phase transformer systems.
2-2
This document discusses single and three phase transformers and how to determine their equivalent circuit values. It covers the demagnetizing effect, voltage drops due to load current, and describes tests like the d.c. resistance test, open circuit test, and short circuit test which are used to find the equivalent circuit values for transformers. An example is also provided.
2-1
This document discusses the equivalent circuit of single and three phase transformers, including transformer losses from magnetic flux and core losses. It also covers the effect that different loads have on the secondary winding of a transformer.
1-1
This document provides an overview of key topics related to single and three phase transformers, including their construction and operation, the EMF equation, voltage and turns ratios, power equations, and significance of nameplate data items. Learners are directed to read specific chapters in a Jenneson textbook to learn more about transformers, transformer equations, and how to interpret nameplate information.
51 53
Proper maintenance and inspection is required to ensure emergency lighting systems function properly in the event of a power outage. Fire alarm systems must meet certain principles, terms and requirements to effectively detect fires and notify occupants. Radioactive smoke alarms that are no longer functional must be disposed of following applicable regulations due to their hazardous materials.
47 50
Security lighting uses infrared scanning to detect movement and activate lights, while emergency evacuation lighting provides illumination in case of emergency exits. There are different types of emergency lighting systems that can provide illumination for evacuating a building when there is no main power.
45 46
This document provides instructions for calculating the lighting requirements for flood lighting an area. It explains that the total lumens required can be calculated by multiplying the area in square meters by the desired lux level. It then states that the number of lamps needed is equal to the total lumens divided by the lumen output of the selected lamp type.
41 44
This document discusses neon lighting and provides information on electromagnetic compatibility, Queensland energy efficient lighting requirements, and the installation and maintenance of neon lights. It covers regulations for neon signs as well as guidelines for setting up and servicing neon lighting systems in order to ensure compliance with standards.
37 40
Metal halide lamps, high pressure sodium lamps, low pressure sodium lamps, and LEDs are the main types of lighting used today. Metal halide and high pressure sodium lamps are high-intensity discharge lamps commonly used in industrial and outdoor lighting. LEDs are solid-state lamps that have become a popular replacement for other types of lamps due to their energy efficiency and long lifetime.
Recently uploaded
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Best Forex Brokers Comparison in INDIA 2024
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
The Steadfast and Reliable Bull: Taurus Zodiac Sign
Explore the steadfast and reliable nature of the Taurus Zodiac Sign. Discover the personality traits, key dates, and horoscope insights that define the determined and practical Taurus, and learn how their grounded nature makes them the anchor of the zodiac.
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Leaders who possess self-awareness deeply understand their emotions, strengths, and weaknesses.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
The latest Heat Pump Manual from Newentide
𝐔𝐧𝐯𝐞𝐢𝐥 𝐭𝐡𝐞 𝐅𝐮𝐭𝐮𝐫𝐞 𝐨𝐟 𝐄𝐧𝐞𝐫𝐠𝐲 𝐄𝐟𝐟𝐢𝐜𝐢𝐞𝐧𝐜𝐲 𝐰𝐢𝐭𝐡 𝐍𝐄𝐖𝐍𝐓𝐈𝐃𝐄’𝐬 𝐋𝐚𝐭𝐞𝐬𝐭 𝐎𝐟𝐟𝐞𝐫𝐢𝐧𝐠𝐬
Explore the details in our newly released product manual, which showcases NEWNTIDE's advanced heat pump technologies. Delve into our energy-efficient and eco-friendly solutions tailored for diverse global markets.
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Schedule Unveiled
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
Maintaining a proper record of your money is important for any business whether it is small or large. It helps you stay one step ahead in the financial race and be aware of your earnings and any tax obligations.
However, managing finances without an entire accounting staff can be challenging for small businesses.
Accounting apps can help with that! They resemble your private money manager.
They organize all of your transactions automatically as soon as you link them to your corporate bank account. Additionally, they are compatible with your phone, allowing you to monitor your finances from anywhere. Cool, right?
Thus, we’ll be looking at several fantastic accounting apps in this blog that will help you develop your business and save time.
3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
The Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
2022 Vintage Roman Numerals Men Rings
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
TIMES BPO: Business Plan For Startup Industry
Starting a business is like embarking on an unpredictable adventure. It’s a journey filled with highs and lows, victories and defeats. But what if I told you that those setbacks and failures could be the very stepping stones that lead you to fortune? Let’s explore how resilience, adaptability, and strategic thinking can transform adversity into opportunity.
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & InnovationOperational Excellence Consulting
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentationsProfiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Recently uploaded (20)
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Steadfast and Reliable Bull: Taurus Zodiac Sign
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
Top 10 Free Accounting and Bookkeeping Apps for Small Businesses
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
Innovation Management Frameworks: Your Guide to Creativity & Innovation
Innovation Management Frameworks: Your Guide to Creativity & Innovation
wb5-2
- 1. Telecommunications Cable Installations Telecommunication Earthing Systems