The VXStream video appliance is a scalable bandwidth reducing solution that can lower bandwidth usage of H.264 video streams by over 75% while maintaining high video quality. It produces industry standard H.264 video that can be viewed on any device and lowers associated bandwidth and storage costs for transmitting security video through networks. The appliance architecture allows remote video viewing over the internet while lowering storage needs by over 75% for a 16 camera installation.

2. The VXStream video appliance, is a scalable bandwidth reducing solution. With our encoding
ability, companies can now transmit their security video through any network efficiently while lowering
associated bandwidth and storage costs.
VXStream has the ability to…
• Produce industry standard H.264 video and can be viewed with any off
the shelf viewer such as Win Media, VLC, Xvid, etc…
• Lower the bandwidth of full motion H.264 video stream by OVER 75%,
• MJPEG quality video at lower than H.264 bandwidth
• Lower storage by OVER 75%
• Our technology does not drop frames, packets, or delete data after
storage to create more storage and our streams maintain a Structural
Similarity Index Method (SSIM) of 97%!

3. VXStream Architecture
Switch Switch
Remote Viewing NVR
Modem
Internet
Jason Lysak
President
770-313-7956
Jason@vxsusa.com

4. The graph below shows where the current compression technology is today
and where it is anticipated to be in 2025 by the Digital Video Broadcast Organization!
Jason Lysak
President
770-313-7956
Jason@vxsusa.com
Graph Source: www.DVB.org Issue No. 39, March 2012

5. This flexible streaming solution enables you to deploy your resources as never before. Ready for distribution
in any network or cloud technology.
Overcome your bandwidth issues and stream and store effortlessly with MJPEG quality video at less than
H.264 or even upcoming HEVC standards!
Stream Quality (12 fps) VXStream h.264
Mobile Quality (240P) .15 Mbps .5 Mbps
4CIF Quality (480P) .3 Mbps .8 Mbps
HD Quality (720P) .55 Mbps 3 Mbps
Full HD Quality (1080P) 1.1 Mbps 6 Mbps
Storage Quality (12 fps) VXStream h.264 MJPEG
Mobile Quality (240P) .025 Mbps .5 Mbps .93 Mbps
4CIF Quality (480P) .096 Mbps .8 Mbps 3.74 Mbps
HD Quality (720P) .256 Mbps 3 Mbps 11.48 Mbps
Full HD Quality (1080P) .5 Mbps 6 Mbps 25.2 Mbps
Using the figures above in a 16 camera installation at 4CIF resolution the storage needs
drop from 4.27 TB to .47TB for thirty days of storage, that is an 89% reduction!

8. Performance Data- The Numbers

9. The concept of “pass through” camera streaming and control
Cam 1 IP 10.10.1.1 – port 80 + 8080 VXStream Encoding IP 10.10.2.1 – port 80 + 8080 VMS
Video store
Cam 2 IP 10.10.1.2 – port 80 + 8080 IP 10.10.2.2 – port 80 + 8080
Video store
Cam 3 IP 10.10.1.3 – port 80 + 8080 IP 10.10.2.3 – port 80 + 8080
Video store
Cam 4 IP 10.10.1.4 – port 80 + 8080 IP 10.10.2.4 – port 80 + 8080
Cam n IP 10.10.1.254 – port 80 + 8080 IP 10.10.2.254 – port 80 + 8080
From the cameras the VXStream encoder receives live video streams –
in the above figure we see the blue cameras streaming at predefined IP addresses (the red arrows)
and the VXStream server streaming in a different IP range (the green arrows).
These secondary (transcoded streams) are received by the VMS and eventually stored on the VMS’s disk array.

10. VXStream VMS
server
Video store
Video store
1
IP 10.10. .1 – port 8080 = Cam 1 control interface / PTZ 2
IP 10.10. .1 – port 8080 = Cam 1 control interface / PTZ
commands etc. commands etc.
Cam 1
Video store
VXStream
video encoder
1
IP 10.10. .1 – port 80 - video 2
IP 10.10. .1 – port 80 - video
Generally a camera streams at it’s IP address and port number 80, while the camera’s control interface uses port 8080.
The VXStream server passes all control data for the camera received from the VMS on port 8080 through to the camera –
unaltered. In this way the VMS controls the cameras in a direct and unaltered way.
Depending on the control sequences sent from the VMS to the camera, the camera will stream video on port 80.
The VXStream server receives this video stream and transcodes it to VXStreams low-bitrate H.264 complaint video streams.

11. Jason Lysak
President
770-313-7956
Jason@vxsusa.com

12. System Specifications
Motherboard: Front Panel Input/ Output
Buttons Serial ATA
Dual 1366-pin LGA Sockets Power On/Off, System Reset button Six Serial ATA ports, Six SATA hard drives supported
Supports up to two two Intel® 64-bit Xeon® processor(s) of the same LED’s LAN
type below: Power LED, Hard drive activity LED, 2x Network activity 2x RJ45 LAN ports, 1x RJ45 Dedicated IPMI LAN port
LED, System Overheat LED USB
CPU Intel® Xeon® Processor E5600/L5600 Series Ports Total 6 USB 2.0 Compliant
(Westmere) 40W - 80W 2x Front USB Ports 2x USB rear ports, 1x USB on-board, 2x USB internal headers
1x Serial COM Port VGA
Intel® Xeon® Processor E5500/L5500 Series
1x VGA Port
(Nehalem-EP) 38W - 80W
Expansion Slots Keyboard/ Mouse
PCI- Express PS/2 keyboard and mouse ports
QPI 1 PCI-E(x8) in x 16 slot Serial Port/ Header
up to 6.4 GT/s 1 Fast UART 16550 serial port
Drive Bays
System Memory Hot Swap Power Supply
4x3.5” Hot- Swap SATA drive bays
Memory Cap.
350W AC power supply w/PFC
6x 240 pin DIMM sockets Peripheral Drives
Supports up to 48 GB** 1333/1066/800MHz DDR3 ECC Registered DVD- ROM Slim DVD- ROM drive (optional) AC Voltage
Supports up to 48 GB** 1333/1066/800MHz DDR3 Non ECC 100-240 V, 50-60 Hz, 4.2-1.8 Amp
Unbuffered memory SATA Backplane (+5V 18 Amp, +5V standby 3 Amp, +12V 29 Amp, +3.3V 15 Amp)
Memory Mirroring Support 1x SATA Backplane Certification80 PLUS Gold Certified
System Cooling PC Health Monitoring
Memory Type Fans
1333/1066/800MHz ECC Registered/ ECC or Non ECC Unbuffered 4x4cm heavy duty RPM fans CPU
DDR3 SDRAM 72 bit, On- Board Devices Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V
240-pin gold plated DIMMs Standby, VBAT, HT, Memory, Chipset Voltages.
Chipset 4-Phase-switching voltage regulator
Intel® 5500 (Tylersburg) chipset ICH10R + IOH-24D FAN
DIMM Sizes
SATA Total of six fan headers supporting up to 6 fans Six 4-pin fan headers
1GB, 2GB, 4GB, 8GB Intel ICH10R SATA 3.0Gbps Controller 6x fans with tachometer status monitoring
RAID 0, 1, 5, 10 support (Windows) Support 3-pin fans (w/o speed control)
Memory Voltagge RAID 0, 1, 10 support (Linux) Low noise fan speed control
1.5V IPMI Temperature
Support for Intelligent Platform Management Interface v.2.0 Monitoring for CPU and chassis environment
Error Detection
IPMI 2.0 with virtual media over LAN and KVM-over-LAN Thermal Control for 6x fan connectors PECI
Corrects single-bit errors support Other Features
Detects double- bit errors (using ECC memory) Winbond® WPCM450 BMC Chassis intrusion detection
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) Network Controllers Chassis intrusion header
2x Intel® 82574L Gigabit Ethernet Controllers Supports
10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Operating Environment/ Compliance
System BIOS
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics RoHS
BIOS Type 32Mb SPI Flash EEPROM with AMI® Matrox G200eW RoHS Compliant
BIOS Features Super I/O Environmental Spec.
Plug and Play (PnP) , PCI 2.2, ACPI up to 3.0, USB Keyboard support Winbond 83827HF chip Operating Temperature: 10 to 35 C (50 to 95 F)
Non-operating Temperature: -40 to 70 C (-40 to 158 F)
Dimensions Operating Relative Humidity: 8% to 90% (non-condensing)
Chassis Height Non-operating Relative Humidity: 5 to 95%
1U Form Factor 1.7” (43mm), Width 17.2” (437mm), Depth 19.8”
(503MM), Gross Weight 31lbs. (14.1kg)