Rafael Volcanes has over 7 years of experience as an industrial engineer in the automotive industry. He has worked on projects for BMW and Cadillac, focusing on process planning, line balancing, headcount optimization, and continuous improvement. His experience includes designing production workflows, improving productivity, reducing costs, and supporting project implementation from launch through ramp-up. He holds a B.S. in Industrial and Systems Engineering from the University of Florida.
Ben Franke has over 17 years of experience in mechanical design, engineering, project management, and quality engineering. He currently works as a mechanical design engineer at Boeing, where he has led projects designing flight test installations and implementing new engineering processes. Previously he worked as a quality engineer at Boeing and as a mechanical engineer and project engineer at other companies. He has a bachelor's degree in mechanical engineering and a master's degree in mechanical engineering.
Jerome Sanchez is applying for a mechanical engineering position. He has over 13 years of experience in mechanical design, maintenance, project supervision and training. His qualifications include expertise in AutoCAD, Alibre Design, SAP and refrigeration systems. His work experience includes positions at Jollibee Foods Corporation, Imperial Palace Hotel and Waterpark Resort, and Ebecor Corporation, where he supervised technicians, designed and cost projects, and ensured equipment was functioning properly.
Alessia Newton Harrell is seeking a position that utilizes her expertise in electrical systems, machine control systems, and change management. She has over 20 years of experience in controls engineering roles at Fiat Chrysler Automobiles and Delphi Electronics & Safety, where she resolved issues, maintained control strategies, analyzed data, and provided technical leadership. She has a Bachelor of Science in Electrical Engineering from Old Dominion University.
Amer Malik is an experienced manufacturing and test engineering manager with over 20 years of experience transitioning products from design to manufacturing. He has a proven track record of establishing manufacturing and test processes, improving yields, and delivering high quality products on time. Malik has managed teams and budgets at several technology companies, including FireEye, Infoblox, Plastic Logic, Blue Coat Systems, and Nokia.
Bruce_Clark_Honeywell_Resume_r1_08-2015Bruce Clark
Bruce Clark is seeking a management position involving customer service and product repair. He has over 15 years of experience in manufacturing engineering and management at Honeywell, where he supervised day-to-day operations and new product introductions. His skills include project management, process development, and mentoring associates. Previously he managed Honeywell's PCBA repair department, establishing structure and tools that reduced costs and improved throughput.
Lakshmanan Subbiah is applying for a senior level position as a design and production manager. He has over 11 years of experience in production engineering, quality control, and process improvement. He is seeking to leverage his skills and experience in technical operations, project management, and achieving quality standards to contribute to a new organization.
Ángel F. Rios has over 20 years of experience in integrated supply chain, medical devices, and electronics manufacturing. He holds a Bachelor's degree in Electrical Engineering Technology and a Master's in Business Administration. Rios currently works as a Mechanical Sourcing Enterprise Leader at Honeywell Aerospace, where he manages cost reduction initiatives and leads a team of technical professionals. Prior to Honeywell, he held technical and engineering roles with increasing responsibility at Johnson & Johnson, Hewlett Packard, and Nokia Networks.
Igor Kudevitsky has over 20 years of experience in production manufacturing process engineering for robotics and optical products. He has effectively led production business units from start to ready-to-ship product for complex customer configuring products. Kudevitsky is skilled at meeting company objectives through building solutions to operational challenges and has a proven track record of completing tasks above expectations. He currently works as a Production Manufacturing Process Engineer at E-Systems Technology, where he is responsible for operation cost reduction and production documentation.
Ben Franke has over 17 years of experience in mechanical design, engineering, project management, and quality engineering. He currently works as a mechanical design engineer at Boeing, where he has led projects designing flight test installations and implementing new engineering processes. Previously he worked as a quality engineer at Boeing and as a mechanical engineer and project engineer at other companies. He has a bachelor's degree in mechanical engineering and a master's degree in mechanical engineering.
Jerome Sanchez is applying for a mechanical engineering position. He has over 13 years of experience in mechanical design, maintenance, project supervision and training. His qualifications include expertise in AutoCAD, Alibre Design, SAP and refrigeration systems. His work experience includes positions at Jollibee Foods Corporation, Imperial Palace Hotel and Waterpark Resort, and Ebecor Corporation, where he supervised technicians, designed and cost projects, and ensured equipment was functioning properly.
Alessia Newton Harrell is seeking a position that utilizes her expertise in electrical systems, machine control systems, and change management. She has over 20 years of experience in controls engineering roles at Fiat Chrysler Automobiles and Delphi Electronics & Safety, where she resolved issues, maintained control strategies, analyzed data, and provided technical leadership. She has a Bachelor of Science in Electrical Engineering from Old Dominion University.
Amer Malik is an experienced manufacturing and test engineering manager with over 20 years of experience transitioning products from design to manufacturing. He has a proven track record of establishing manufacturing and test processes, improving yields, and delivering high quality products on time. Malik has managed teams and budgets at several technology companies, including FireEye, Infoblox, Plastic Logic, Blue Coat Systems, and Nokia.
Bruce_Clark_Honeywell_Resume_r1_08-2015Bruce Clark
Bruce Clark is seeking a management position involving customer service and product repair. He has over 15 years of experience in manufacturing engineering and management at Honeywell, where he supervised day-to-day operations and new product introductions. His skills include project management, process development, and mentoring associates. Previously he managed Honeywell's PCBA repair department, establishing structure and tools that reduced costs and improved throughput.
Lakshmanan Subbiah is applying for a senior level position as a design and production manager. He has over 11 years of experience in production engineering, quality control, and process improvement. He is seeking to leverage his skills and experience in technical operations, project management, and achieving quality standards to contribute to a new organization.
Ángel F. Rios has over 20 years of experience in integrated supply chain, medical devices, and electronics manufacturing. He holds a Bachelor's degree in Electrical Engineering Technology and a Master's in Business Administration. Rios currently works as a Mechanical Sourcing Enterprise Leader at Honeywell Aerospace, where he manages cost reduction initiatives and leads a team of technical professionals. Prior to Honeywell, he held technical and engineering roles with increasing responsibility at Johnson & Johnson, Hewlett Packard, and Nokia Networks.
Igor Kudevitsky has over 20 years of experience in production manufacturing process engineering for robotics and optical products. He has effectively led production business units from start to ready-to-ship product for complex customer configuring products. Kudevitsky is skilled at meeting company objectives through building solutions to operational challenges and has a proven track record of completing tasks above expectations. He currently works as a Production Manufacturing Process Engineer at E-Systems Technology, where he is responsible for operation cost reduction and production documentation.
Antranig Shakhe Avakian is a technical consultant seeking leadership roles in manufacturing environments, preferably in Asia. He has over 25 years of experience in roles such as Operations Manager, Technical Consultant, and Manufacturing Manager. He has strong skills in CNC programming, robotics, CAD/CAM software, and technical writing.
This document provides a summary of D'Ann Pinkerton's qualifications for a challenging position in program management, project management, or control account management. She has over 21 years of experience in these areas working for the government and holds an MBA and PMP certification. Her experience includes scheduling, planning, cost monitoring, and managing cross-functional project teams in engineering, construction, manufacturing, and other areas. She also has experience leading budget, procurement, and accounting activities and administering staffing plans.
Umar Inam Karim is a project lead engineer and project manager with over 7 years of experience in instrumentation and control systems. He has extensive experience designing, installing, and commissioning control panels, wellhead control panels, metering skids, and other systems. He is proficient in multiple control system platforms and programming languages. Karim is seeking a new challenging position where he can utilize his skills to contribute to organizational growth.
Todd Kelly has over 20 years of experience in manufacturing engineering, production management, and machining. He has extensive leadership experience overseeing manufacturing operations and staff of over 20 people. Kelly has worked in industries such as aerospace, helicopter manufacturing, and aircraft component manufacturing. He is skilled in areas such as process improvement, design for manufacturing, and lean manufacturing principles.
This document is a CV for Dumitru Iulian Maria, a mechatronics engineer with over 7 years of experience in software engineering and production technical roles. His experience includes roles at Johnson & Johnson Vision Care and Continental Automotive, where he supported new project launches, improved manufacturing processes, developed automation software, and provided technical support. He has strong skills in programming environments like Step7 and programming PLCs from Siemens and Allen-Bradley. His CV highlights his achievements, responsibilities, education and training.
Vincent N. Priest is a highly skilled tooling, manufacturing, and mechanical design engineer with over 25 years of experience. He has expertise in root cause analysis, problem solving, precision manufacturing, and team building. He has extensive experience in tooling design, machining, CNC programming, and lean manufacturing techniques. Priest's professional experience includes roles as a manufacturing engineer, tooling engineer, machine shop supervisor, and engineering services. He has a Bachelor's of Science in Mechanical Engineering and is qualified as a Senior Principal Engineer.
Ron Gross has over 40 years of experience in mechanical, maintenance, and manufacturing roles. He has a history of developing cost-saving processes and preventative maintenance programs to reduce downtime. His skills include leadership, planning, problem-solving, mechanical aptitude, engineering, and teamwork. He has held roles such as Mechanical Supervisor, Toolmaker Lead Hand, and Machinist Lead.
Kakumanu Gopi is a design engineer from Hyderabad, India seeking new opportunities. He has over 5 years of experience in design engineering and product cost estimation. He is proficient in design software like Unigraphics and AutoCAD. Gopi has expertise in quality testing and understands international standards for hydraulic fittings and hose assemblies. He is currently working as a Design & Development Engineer and has previously worked for companies manufacturing valves, pipe fittings, hydraulic end fittings and air handling units.
This document provides a summary of Kingsley Emeghebo's professional experience and qualifications. It outlines his experience in sales, business development, information technology, and engineering. Key areas of expertise include SAP systems, workforce management, proposal writing, customer service, and project management. The document also provides details of Kingsley's educational background and computer skills.
This document provides a summary of Purushothaman's qualifications and experience. He has over 16 years of experience in electronics engineering and management. Currently he works as a Manager of Production at Lukup Technologies, where he is responsible for new product introduction, manufacturing operations, and quality management. Previously he held similar roles at e-CON Systems and HCL Technologies. He has extensive expertise in electronics manufacturing, quality systems, program management, and supplier development.
This document is a resume for Naveesh Kapoor, an engineering management and project management professional with over 16 years of experience. It summarizes his expertise in areas like project management, engineering management, maintenance management, and team leadership. It also provides details of his past work experience managing engineering projects, maintenance operations, and utilities across various industries. Key highlights of projects executed and achievements are mentioned.
Intend to build a career in the field of Software Testing, which will give me an opportunity to work on challenging problems in a tough competitive environment. With my zeal to work hard, my career goal would be to put in my best efforts and play a key role in the success of my organization
Vivek Gupta is seeking an Operations Management position with over 8 years of experience in manufacturing, production, engineering, and lean manufacturing. He has a proven track record of significantly increasing revenue and operational efficiency through strategic operation management, cost reduction, process improvement, and quality assurance. His technical skills include CAD/CAM, CNC programming, sheet metal operations, and fan performance testing.
Denise H. Yu-Szeto is seeking an engineering management position in manufacturing. She has over 20 years of experience transferring products from design to production, including experience leading operations teams to improve processes. Her background includes positions in manufacturing engineering management, quality assurance, and electronic diagnostic engineering.
This document contains a summary of Santosh Shelake's professional experience and qualifications. He has over 8 years of experience in process design, lean methodologies, and industrial engineering. Currently working as a Senior Manufacturing Engineer at John Deere Technology Center, his responsibilities include process planning, lean tools implementation, virtual manufacturing, and more. He has a BE in Industrial and Production Engineering and professional training in lean practices and Six Sigma Green Belt.
This document summarizes the experience and qualifications of Marc Buechner as a senior-level project manager with over 20 years of experience in product design, project management, and process engineering. He has a proven track record of successfully delivering engineering projects on time and on budget, improving efficiency, reducing costs, and ensuring quality standards. Buechner is proficient in various project management and engineering tools and holds credentials in project management, lean manufacturing, and other related fields. He currently serves as a Project Manager at Thyssenkrupp Presta, where he spearheads new product development initiatives and process improvements.
The document is a resume for William A. Guatemala. It summarizes his objective as seeking an engineering role drawing on experience in manufacturing, quality engineering, and concurrent engineering. It then lists his work history including current and previous roles in manufacturing engineering and quality management for companies in aerospace, medical, and consumer electronics. It also lists his education as a Bachelor of Science in Industrial Engineering and notes skills in English and Spanish.
This document summarizes the experience and qualifications of Gajendra Prabhu G:
- Over 5 years of experience in manufacturing engineering, quality assurance, production planning, and project management at companies like Caterpillar India and Modine Thermal Systems India.
- Skilled in manufacturing processes, quality control, lean manufacturing techniques, and troubleshooting production issues.
- Holds a B.E. in Mechanical Engineering and is currently pursuing an MBA in Operations Management.
- Proficient with CAD software, quality tools, and statistical process control methods.
Kai Kendall is seeking a position as a CMM Quality Inspector/Programmer where he can utilize his 14 years of technical experience in manufacturing quality control. He has extensive experience programming and operating CMM machines, developing quality control systems, and ensuring products meet aerospace industry standards. His resume details work history from 1996-present conducting inspections, programming CMM machines, developing quality procedures, and assisting in process improvement at various companies. He has an education in quality engineering and holds multiple ASQ certifications.
The document provides a summary of James Castronova's professional experience as a senior controls engineer. It outlines his expertise in designing, managing and marketing electrical control systems. It also lists his areas of specialization including industrial control, PLC programming, MMI/SCADA/WEB systems, mechanical design, project engineering and management skills. His experience includes roles at Corning Inc., various controls contractual assignments, and Nova Technology International where he was the chief engineer and owner.
Raymond Samworth has over 15 years of experience in quality control and inspection planning. He is a Six Sigma Green Belt with experience developing inspection plans, FMEA, PFMEA, and APQP processes. He has programming experience with contact and non-contact inspection methods and is proficient in GD&T, 5S principles, blueprint reading, and troubleshooting. Currently pursuing certification as a Quality Engineer, he has been involved in equipment evaluation, supplier improvement activities, and training program development.
Andrew Levine has over 30 years of experience in manufacturing engineering, quality control, and project management. He specializes in lean manufacturing techniques and has a green belt in Six Sigma. His objective is to transfer his quality system and process improvement expertise to a senior manufacturing or quality engineering role.
Antranig Shakhe Avakian is a technical consultant seeking leadership roles in manufacturing environments, preferably in Asia. He has over 25 years of experience in roles such as Operations Manager, Technical Consultant, and Manufacturing Manager. He has strong skills in CNC programming, robotics, CAD/CAM software, and technical writing.
This document provides a summary of D'Ann Pinkerton's qualifications for a challenging position in program management, project management, or control account management. She has over 21 years of experience in these areas working for the government and holds an MBA and PMP certification. Her experience includes scheduling, planning, cost monitoring, and managing cross-functional project teams in engineering, construction, manufacturing, and other areas. She also has experience leading budget, procurement, and accounting activities and administering staffing plans.
Umar Inam Karim is a project lead engineer and project manager with over 7 years of experience in instrumentation and control systems. He has extensive experience designing, installing, and commissioning control panels, wellhead control panels, metering skids, and other systems. He is proficient in multiple control system platforms and programming languages. Karim is seeking a new challenging position where he can utilize his skills to contribute to organizational growth.
Todd Kelly has over 20 years of experience in manufacturing engineering, production management, and machining. He has extensive leadership experience overseeing manufacturing operations and staff of over 20 people. Kelly has worked in industries such as aerospace, helicopter manufacturing, and aircraft component manufacturing. He is skilled in areas such as process improvement, design for manufacturing, and lean manufacturing principles.
This document is a CV for Dumitru Iulian Maria, a mechatronics engineer with over 7 years of experience in software engineering and production technical roles. His experience includes roles at Johnson & Johnson Vision Care and Continental Automotive, where he supported new project launches, improved manufacturing processes, developed automation software, and provided technical support. He has strong skills in programming environments like Step7 and programming PLCs from Siemens and Allen-Bradley. His CV highlights his achievements, responsibilities, education and training.
Vincent N. Priest is a highly skilled tooling, manufacturing, and mechanical design engineer with over 25 years of experience. He has expertise in root cause analysis, problem solving, precision manufacturing, and team building. He has extensive experience in tooling design, machining, CNC programming, and lean manufacturing techniques. Priest's professional experience includes roles as a manufacturing engineer, tooling engineer, machine shop supervisor, and engineering services. He has a Bachelor's of Science in Mechanical Engineering and is qualified as a Senior Principal Engineer.
Ron Gross has over 40 years of experience in mechanical, maintenance, and manufacturing roles. He has a history of developing cost-saving processes and preventative maintenance programs to reduce downtime. His skills include leadership, planning, problem-solving, mechanical aptitude, engineering, and teamwork. He has held roles such as Mechanical Supervisor, Toolmaker Lead Hand, and Machinist Lead.
Kakumanu Gopi is a design engineer from Hyderabad, India seeking new opportunities. He has over 5 years of experience in design engineering and product cost estimation. He is proficient in design software like Unigraphics and AutoCAD. Gopi has expertise in quality testing and understands international standards for hydraulic fittings and hose assemblies. He is currently working as a Design & Development Engineer and has previously worked for companies manufacturing valves, pipe fittings, hydraulic end fittings and air handling units.
This document provides a summary of Kingsley Emeghebo's professional experience and qualifications. It outlines his experience in sales, business development, information technology, and engineering. Key areas of expertise include SAP systems, workforce management, proposal writing, customer service, and project management. The document also provides details of Kingsley's educational background and computer skills.
This document provides a summary of Purushothaman's qualifications and experience. He has over 16 years of experience in electronics engineering and management. Currently he works as a Manager of Production at Lukup Technologies, where he is responsible for new product introduction, manufacturing operations, and quality management. Previously he held similar roles at e-CON Systems and HCL Technologies. He has extensive expertise in electronics manufacturing, quality systems, program management, and supplier development.
This document is a resume for Naveesh Kapoor, an engineering management and project management professional with over 16 years of experience. It summarizes his expertise in areas like project management, engineering management, maintenance management, and team leadership. It also provides details of his past work experience managing engineering projects, maintenance operations, and utilities across various industries. Key highlights of projects executed and achievements are mentioned.
Intend to build a career in the field of Software Testing, which will give me an opportunity to work on challenging problems in a tough competitive environment. With my zeal to work hard, my career goal would be to put in my best efforts and play a key role in the success of my organization
Vivek Gupta is seeking an Operations Management position with over 8 years of experience in manufacturing, production, engineering, and lean manufacturing. He has a proven track record of significantly increasing revenue and operational efficiency through strategic operation management, cost reduction, process improvement, and quality assurance. His technical skills include CAD/CAM, CNC programming, sheet metal operations, and fan performance testing.
Denise H. Yu-Szeto is seeking an engineering management position in manufacturing. She has over 20 years of experience transferring products from design to production, including experience leading operations teams to improve processes. Her background includes positions in manufacturing engineering management, quality assurance, and electronic diagnostic engineering.
This document contains a summary of Santosh Shelake's professional experience and qualifications. He has over 8 years of experience in process design, lean methodologies, and industrial engineering. Currently working as a Senior Manufacturing Engineer at John Deere Technology Center, his responsibilities include process planning, lean tools implementation, virtual manufacturing, and more. He has a BE in Industrial and Production Engineering and professional training in lean practices and Six Sigma Green Belt.
This document summarizes the experience and qualifications of Marc Buechner as a senior-level project manager with over 20 years of experience in product design, project management, and process engineering. He has a proven track record of successfully delivering engineering projects on time and on budget, improving efficiency, reducing costs, and ensuring quality standards. Buechner is proficient in various project management and engineering tools and holds credentials in project management, lean manufacturing, and other related fields. He currently serves as a Project Manager at Thyssenkrupp Presta, where he spearheads new product development initiatives and process improvements.
The document is a resume for William A. Guatemala. It summarizes his objective as seeking an engineering role drawing on experience in manufacturing, quality engineering, and concurrent engineering. It then lists his work history including current and previous roles in manufacturing engineering and quality management for companies in aerospace, medical, and consumer electronics. It also lists his education as a Bachelor of Science in Industrial Engineering and notes skills in English and Spanish.
This document summarizes the experience and qualifications of Gajendra Prabhu G:
- Over 5 years of experience in manufacturing engineering, quality assurance, production planning, and project management at companies like Caterpillar India and Modine Thermal Systems India.
- Skilled in manufacturing processes, quality control, lean manufacturing techniques, and troubleshooting production issues.
- Holds a B.E. in Mechanical Engineering and is currently pursuing an MBA in Operations Management.
- Proficient with CAD software, quality tools, and statistical process control methods.
Kai Kendall is seeking a position as a CMM Quality Inspector/Programmer where he can utilize his 14 years of technical experience in manufacturing quality control. He has extensive experience programming and operating CMM machines, developing quality control systems, and ensuring products meet aerospace industry standards. His resume details work history from 1996-present conducting inspections, programming CMM machines, developing quality procedures, and assisting in process improvement at various companies. He has an education in quality engineering and holds multiple ASQ certifications.
The document provides a summary of James Castronova's professional experience as a senior controls engineer. It outlines his expertise in designing, managing and marketing electrical control systems. It also lists his areas of specialization including industrial control, PLC programming, MMI/SCADA/WEB systems, mechanical design, project engineering and management skills. His experience includes roles at Corning Inc., various controls contractual assignments, and Nova Technology International where he was the chief engineer and owner.
Raymond Samworth has over 15 years of experience in quality control and inspection planning. He is a Six Sigma Green Belt with experience developing inspection plans, FMEA, PFMEA, and APQP processes. He has programming experience with contact and non-contact inspection methods and is proficient in GD&T, 5S principles, blueprint reading, and troubleshooting. Currently pursuing certification as a Quality Engineer, he has been involved in equipment evaluation, supplier improvement activities, and training program development.
Andrew Levine has over 30 years of experience in manufacturing engineering, quality control, and project management. He specializes in lean manufacturing techniques and has a green belt in Six Sigma. His objective is to transfer his quality system and process improvement expertise to a senior manufacturing or quality engineering role.
Israel Solis is a skilled CNC machinist with over 15 years of experience programming and operating CNC mills and lathes. He has extensive expertise in CNC programming using MasterCAM, GibbsCAM, and SolidWorks. Solis is proficient in all aspects of machining including setup, operation, inspection, and training. His background includes positions at Accurate Machine Company and Accu-Tool where he successfully improved efficiency and reduced costs through process improvements and lean manufacturing techniques. Solis holds an Associate's degree in Mechanical Engineering and Machining Technology.
Scott Bryer has over 15 years of experience in quality management, process improvement, and new product development for automotive and defense manufacturing companies. He currently works as a Senior Quality Engineer for Carlisle Construction Materials, where he implements quality strategies across seven plants. Previously he held quality management roles at Oshkosh-JLG, BAE Systems, L3 Communications, Mack/Volvo Powertrain, and Chrysler Corporation, where he reduced defects and improved processes. Bryer has a background in lean manufacturing, ISO and AS quality certifications, root cause analysis, and project management.
Extensive experience in test system engineering and new product introduction management spanning consumer, automotive, and government products. Skilled at designing test hardware/software solutions, managing technical teams, and collaborating across functions to ensure quality from concept through global manufacturing release. Experience reducing costs and improving efficiency through test automation, process design, statistical analysis, and reuse of test platforms. History of on-time product launches with zero defects escaping testing.
This document provides a summary of qualifications for Tito Camps, including his education, core competencies, and work experience. It highlights that he has over 15 years of experience in reliability engineering, quality assurance, lean manufacturing, and continuous improvement across various industries. His most recent role was as a Reliability Engineering Manager where he led capital projects, implemented predictive maintenance, and established reliability goals.
Scott Bryer has over 15 years of experience in quality management, process improvement, and new product development. He currently works as a Senior Quality Engineer for Carlisle Construction Materials, where he is responsible for quality at 7 plants and has implemented initiatives like a customer complaint process and quality manual standardization. Previously he held quality and engineering roles for companies like Oshkosh-JLG, BAE Systems, L3 Communications, and Chrysler, where he drove quality and process improvements, launched new products, reduced warranty issues, and implemented lean manufacturing techniques.
Billy Elliott is a senior manager at Qorvo with over 20 years of experience in RF engineering, testing, engineering management, and project management. He has led teams of up to 12 engineers and technicians and has experience improving yields, reducing costs, and developing automation software. He is skilled at recruiting, training, and developing technical professionals.
Ronald Motonaga has over 30 years of experience in project management, engineering, manufacturing, and quality roles. He holds a Bachelor's degree in Mechanical Engineering and certifications in Project Management and Six Sigma Black Belt. Currently he is a Project Manager at Mangan Inc. focusing on renewable energy projects including over 30MW of installed photovoltaics.
Timo Gaisear has over 15 years of experience in tooling design, development, and management. He has worked for several automotive companies in engineering roles, managing teams that design and produce tools for vehicle manufacturing. Gaisear has a bachelor's degree in industrial engineering and is proficient in tooling processes, troubleshooting, and languages including English, German, and Spanish. Currently he works as the Mechanical Production Manager and Tooling Manager at WKW Automotive, leading teams that produce over 30,000 parts per day.
This resume is for David A. Carmichael, who has over 25 years of experience in technical service roles within the manufacturing industry. His experience includes roles as a service manager, senior service engineer, applications and maintenance trainer, project manager, and maintenance lead. He has strong skills in electrical, mechanical, hydraulic, pneumatic and PLC systems, as well as experience programming CNC machines and PLCs.
Arthur (Dane) Wise is an experienced manufacturing engineer with over 20 years of experience in design for manufacturing, lean manufacturing, and process failure mode analysis. He has a proven track record of delivering multimillion dollar projects on time and under budget. Wise has extensive experience leading teams and driving process improvements through Six Sigma and lean initiatives, generating up to $30 million in savings. He has held engineering and management roles in aerospace, industrial machining, mining, and other manufacturing industries.
Engr. Sheryl A. Perez is an experienced electronics engineer seeking a challenging position to apply her skills and knowledge. She has over 7 years of experience in quality control and failure analysis at SMART ELECTRONICS manufacturing company. Her qualifications include being a licensed electronics engineer, passing six sigma training, and experience in new product development, ISO auditing, statistical process control, and root cause analysis. She has a bachelor's degree in electronics and communications engineering from Bulacan State University.
Danny De Russe is seeking a position utilizing his education and experience. He has a Bachelor of Science in Industrial Engineering from Texas A&M University. He has worked as a Quality Engineer at Cytec Aerospace Materials since 2014 where he ensures quality compliance and develops quality documents. Prior to that, he worked as a Production Engineer and Manufacturing Engineer. He is bilingual in English and Spanish and proficient in various software programs.
Stephen Lee Perkins has over 20 years of experience in manufacturing engineering. He has a background in mechanical engineering and apprenticeships in turning and fitting. Perkins has experience leading automation projects to improve quality and reduce costs. He specializes in process improvement, root cause analysis, and ensuring manufacturing standards are met. Perkins is proficient in various engineering and manufacturing software, process validation techniques, and lean manufacturing practices.
Rickey Davis is seeking a leadership position in manufacturing to use his knowledge and experience to improve quality and increase profitability. He has over 30 years of experience managing quality, operations, and suppliers. His experience includes reducing defects at Navistar by 83% and lowering supplier PPM defects by 41% at Continental. He holds a Bachelor's degree in Industrial Management Technology and Associates in Electronics Technology.
Paul Krynski has over 30 years of experience in automotive and heavy duty truck powertrain manufacturing, including experience processing and developing manufacturing lines. He has project management experience with large capital equipment projects and a background in manufacturing engineering. His objective is to continue diversifying in manufacturing through project management roles involving machinery, cutting tools, or purchasing.
Ian Patrick is a goal-oriented mechanical engineer and project manager with experience in product development, engineering project management, manufacturing, and process engineering. He has led new product development teams, implemented process improvements to increase efficiency and reduce costs, and assisted quality teams with validations and issue resolution. Patrick holds a BS in Mechanical Engineering from Virginia Tech and has over 6 years of experience in roles of increasing responsibility at companies such as Band-It, IDEX and Federal Mogul.
Sam Sterling has over 17 years of experience in manufacturing engineering, operations, and inventory control. As Engineering Manager at Octagon, Inc., he led a team of 35 personnel and reduced costs by $350,000 per year. Prior to that, as Manufacturing Director at Acme Resources, he managed all manufacturing operations and coordinated a plant relocation without interrupting production. He holds a Bachelor's in Engineering from Virginia Polytechnic Institute.
Hoan Nguyen has over 10 years of experience in manufacturing planning and operations management. As a Manufacturing Planning Engineer, he established comprehensive knowledge of production processes and updated engineering blueprints. He also served as a liaison between manufacturing and sales to calculate estimates and ensure efficient production. As a Shift Supervisor, he managed daily operations and motivated employees to provide quality customer service. He has a Bachelor's degree in Electronics and Computer Engineering Technology from Cal Poly Pomona.
2. ○ Improved line productivity rating from 70%+ to 95%+ after adjustments in line balance and
routing minutes; at the sametime, found and corrected error in the IT productivity report
algorithm that miscalculated productivity by as much as 5%
○ Frequently adjusted linebalance as per changes in valueadded content by the customer
via engineering change requests
○ Reduced directheadcount by one operator per shift for annual costreductions of 100K
USD
○ Developed a shared SKDBulk process and layout to utilize a shared directheadcount
resulting in an annual cost avoidance of 80K USD
○ Introduced BMW X6 content into production line without increasing production or logistics
headcount; sustained weekly productivity rating of 95%+ through implementation;
highestrated production line plantwide for 2014
○ Reduced logistics support headcount by one materialhandler as result of time studies;
annual costsavings of 60K USD
○ Reallocated select subassemblies for center console kitting to the skdbulk production
operator in order to increase series throughput and improve the utilization of the skdbulk
operator. This continuous improvement resulted in an increase in efficiency and productivity
for the entire cell and a reduction in cycle time.
○ Performed runatrate studies alongside project team and process planner
● Program: BMW X6 (F16)
● Commodities: Instrument Panels
● Processes: flaming, laser scoring, leather sewing, glue application, manual prelamination, press
lamination, foldback finesse, ultrasonic welding, infrared welding, final assembly, automated check
station, packing, sequencing
● System: Bulk production, onepiece flow, JIT, JIS, BMW 500signal, BMW 5300signal, SKD
● Engineering Function: Lead Industrial Engineer
○ Improved directheadcount productivity through operatorload consolidations in various
processes for a reduction in five headcount per shift; annual costreduction of 480K+ USD
over the projecttoplant handoff headcount;increased productivity by 20%+
○ Created process by which to staff the bulk production cell and maintain productivity
efficiency given the highlyvariable demand volumes present at start of program
○ Reduced materialhandling times within the production cell in order to reduce cycle times
below the internal Takt time defined by the F16 project team as volumes ramped up
○ Defined and implemented SKD process and layout to gapfill series production idletimes
during unforecasted downtimes
○ Optimized layout in the sewing area to allow for sufficient inventory to meet customer
demand given that takerates for leathersewn variants were outside of the planning
volumes
○ Increased lineside material capacity (within already present footprint) to reduce downtimes
caused by missing material in the bulk production area
● Program: BMW X6 (F16)
● Commodities: Door Panels
● Processes: Presslamination, coldknife cutting, foldback, hotmelt, groovecover lamination,
molykote application, check and pack, sequencing
● System: Bulk production, batch, onepiece flow, JIT/JIS (internal to plant)
● Engineering Function: Lead Industrial Engineer
3. ○ Designed the projectselected greenfield layout; subsequently, supported the project team
and Process Planner in the planning and implementation phase
○ Supported Process Planner in line balancing and headcount optimization during the launch
and rampup phase
○ Reduced headcount by four operators per shift from the launch headcount through time
study analysis and operator content consolidation
○ Performed runatrate studies alongside project team and process planner
● Program: BMW X6 (F16)
● Commodities: Door Panels
● Processes: Preassembly, ultrasonic welding, heatstake welding, final assembly, check and pack,
material handling
● System: Onepiece flow, JIT, JIS, BMW 5000signal, BMW 5300signal
● Engineering Function: Lead Industrial Engineer
○ Optimized preassembly process to reduce headcount by two operators per shift; resulting
in an annual costreduction of 120K USD
○ Reduced cycle times for production cell and increased capacity by 10% within Takt time
with a decreased headcount
○ Increased production cell productivity from 50%+ to 85%+ through decreased
directheadcount, allocation of valueadded minutes, and accurate minutes reporting;
operational days reduced due to greatly improved line productivity
○ Reduced logistics directheadcount of the JIS backend by 75% through time studies,
operator training, and layout optimization of the four BMW 5300signal resequencing cells;
annual cost reduction of 240K USD
○ Optimized layout to improve material flow and increase lineside capacity within the cell
footprint and allow for the insourcing of the door Top Shoulders; previously located in an
offsite supermarket and delivered via dropandhook in cycles
○ Performed runatrate studies alongside project team and process planner
● Program: BMW X3 (F25/F26)
● Commodities: Instrument Panel
● Processes: Punching, milling, cutting, welding, final assembly, check and pack, material handling
● System: Onepiece flow, JIT, JIS, BMW 5000signal, BMW 5300signal
● Engineering Function: Industrial Engineer (supporting role)
○ Provided support to line industrial engineer for time studies, line balancing, and layout
improvements
○ Analyzed headcount for the punching, milling, and welding cell; implemented reduced
headcount in 2013
○ Supported F26 project team and process planner with runatrate studies for production
capabilities and process review
● Program: BMW X3 (F25/F26)
● Commodities: Door Panels
● Processes: Punching, milling, cutting, welding, final assembly, check and pack, material handling
● System: onepiece flow, JIT, JIS, BMW 5000signal, BMW 5300signal
● Engineering Function: Industrial Engineer (supporting engineer)
○ Performed rootcause analysis alongside the line process engineer to level production
throughout; reduced cycletime variability between four infrared welding machines
4. ○ Provided support to line industrial engineer for time studies and line balancing
○ Performed routine time studies to support line process engineers
● Program: Cadillac XTS (X1LL)
● Commodities: Glovebox + components, kneebolster + components, door panel sidebolsters, door
panel map pockets
● Processes: Hotmelt glue application, inmold grain lamination, automated foldback, infrared
welding, manual welding, manual foldback, preassembly, final assembly, check and pack,
pokeyoke, and plant production logistics
● System: bulk production, batch, conwip, and onepiece flow
● Engineering Function: Lead Industrial Engineer
○ Designed and implemented optimized layout for the Cadillac XTS production cell in order to
switch from a onepiece flow process to a batch process to account for a reduced forecast
in customer demand for 2014
○ Reduced the Cadillac XTS directheadcount by 25% to maintain line productivity rating as a
batchbuild production cell; adjusted shiftmodel to reduce logistics support load during
bshift and reduce operational costs
○ Decreased indirectheadcount by one materialhandler for an annual costreduction of 60K
USD
○ Designed and implemented Cadillac XTS production layout to further reduce floorspace
utilization of program by 20% to allow for the insourcing of the Service Parts production cell
into Plant 24
○ Increased Cadillac XTS IMG Lamination Press capacity and scheduling flexibility via
SMED project. Implementation reduced changeover time from 45 minutes to 25 minutes;
decreased headcount necessary for changeover process from four associates to two
associates; improved press lamination OEE from increased machine availability
○ Slashed directheadcount for the Cadillac XTS Kneebolster production by 50% for an
annual costreduction of 50K+ USD
○ Relaxed equipment bottleneck in the Cadillac XTS production cell by transferring select
production to bshift
● Program: Cadillac CTS (A1LL)
● Commodities: Instrument Panel Substrate
● Processes: Preassembly, ultrasonic welding, final assembly, check and pack, material handling
● System: onepiece flow, conwip
● Engineering Function: Lead Industrial Engineer
○ Increased line productivity by 25% through audits and corrections to valueadded minutes
○ Linebalanced production cell to reduce directheadcount by 33% without affecting
production runtime, planned shiftmodel; line sustained 95%+ productivity performance
over a twoyear span; annual costsavings of 80K USD
● Section: Injection Molding
● Commodities: Substrates for all Plant 24 production commodities
● Processes: Injection molding, minor assemblies, check and pack, logistics, material handling
● System: Bulk production, batch, onepiece flow
● Engineering Function: Industrial Engineer (lead, 2013; support, 2014)
5. ○ Increased production capacity by 40 days per year in the 500ton press area; this
optimization allowed for the insourcing of previously outsourced commodities, improving the
overall productivity of injection molding production
○ Optimized the process of subassembly of the BMW X5 (F15) center console, reducing the
shift headcount from five operators to three operators for an annual costsavings of 200K
USD for injection molding
○ Performed time studies to determine machine capacity and sharedheadcount allocation
● Section: Plant Logistics
● Commodities: All/Plantwide
● System: JIT, JIS, BMW 5000signal, BMW 5300signal, batch, marketplace, supermarket, highbay
warehouse, docks, shipping and receiving lanes
● Engineering Function: Industrial Engineer (supporting engineer)
○ Supported the plant logistics industrial engineer in insourcing the F16 Instrument Panel
gloveboxes to production lineside from a 3PL supermarket located in an offsite warehouse
○ Developed and implemented the warehouse and marketplace for the F16 door panels
lamination production cell
○ Developed and implemented logistics support cell for the door panel armrests in our to
insource from 3PL supermarket site; this new cell was operated by underutilized
directheadcount already present in the plant, no additional headcount was required
○ Consolidated various plant warehouses into a singular location as part of the plant strategic
plan to reduce waste in materialhandling
○ Increased the capacity of the injection molding blockstorage warehouse to accommodate
additional volumes from the F15 center console production; optimized blockstorage lanes
layout for improved accessibility and lean/minimum inventory levels as allowed by the
PFMEA and contingency plans.
○ Determined shipping lane layout and capacities for wing three for 2014
● Program: InSeries Production Service Parts
● Commodities: Service Parts
● Processes: Production, Logistics
● System: Bulk production, packaging, passthru consolidations
● Engineering Function: Lead Industrial Engineer
○ Reduced the floorspace for the production cell by 50% by optimizing lineside material
availability; relocated cell to reduce materialhandling requirements
○ Developed min/max material inventory levels and production processes to meet floorspace
constraints
● Production Minutes and Routings (all production programs and commodities)
○ Performed running audits of the productions minutes (routings) for all production lines;
adjusted/corrected valueadded minutes and idleminutes as per corporate guidelines for
routings as a means to both control costs for corporate program management and sustain
profitability for the production plant
○ Created method by which to audit minutes for production; this method is now standard for
plant industrial engineering.
6. ● Draexlmaier Ideas (Continuous Improvement Submissions Program)
○ Developed a “strapped laptop board” for engineering to work on the floor. This laptop board
allowed industrial engineering to perform time studies directly onto computers, bypassing
the papertocomputer dataentry and reducing the delivery time and accuracy of all
performed time studies.
○ Introduced GoPro cameras to the plant as means to perform time studies in production and
logistics, and review machine process faults. The cameras allowed for the tracking and
studying of forklift loops and warehouse operations. Since their introduction, the GoPro
systems have been adopted by most plant and planning departments as a means to study
their systems and to archive processes.
○ Champion of the 2014 Draexlmaier Ideas Program for earning the highest score for
implemented changes in DAA Plant 24.
○ Named “Ideas Expert” and given the authority to provide feedback for submitted Ideas
introduced into the system; feedback encompassed the feasibility, ROI, and compensation.
Responsible to implement and document all approved Ideas.
Industrial Engineer, Capital Projects Technical Lead, Corporate Strategic Planning 02/2011 07/2013
AVX Corporation, Fountain Inn, SC
● Project: AVX/Kyocera Asia Distribution Center Expansion + Sales Office Optimization
● Location: Kowloon, Hong Kong
● Year(s): 2013
● Project Functions: Industrial Engineer, Technical Lead, Contractor Management
○ Determined capacity requirements for the Asia Distribution Center while onsite as per local
environmental and work standards
○ Performed due diligence in select sites is Kowloon to determine expansion feasibility as per
calculated capacity and environmental constraints
○ Recommended the expansion of the distribution center into the sales office location in order
to reduce capital expenses; sales office relocated to a smaller, more efficient space within
the same edifice within Kowloon
● Project: Installation of New Production Facility
● Location: Bzenec, CZ; Uherske Hradiste, CZ; Zlin, CZ
● Year(s): 20122013
● Project Functions: Industrial Engineer, Technical Lead, Business Case Analyst
○ Defined retrofitting requirements and planned the facilitation of a 135,000 ft2
brownfield
production facility in Czech Republic for electronic connectors for automotive customers
○ Designed plant, facilities, office, and machine layouts
○ Planned material flow and handling routes as per the winning plant and production layout
○ Supervised machine inventory and moves for relocations and transfer into Bzenec Plant
○ Managed the bidding process by general contractors in Slovakia and Czech Republic and
performed costs, materials, scope audits for each and every bid during three bidding rounds
alongside the European Director of Operations
○ Reviewed all architectural designs and provided feedback to architecture firm for
optimizations tailored to the production technologies, production systems, and logistics
requirements of manufacturing electronic connectors
7. ● Project: HybridElectric Vehicles Pilot Production Line
● Location: Sady Production Plant and Mesit Production Plant, Uherske Hradiste, CZ
● Year(s): 2012
● Project Functions: Industrial Engineer, Technical Lead, Business Case Analyst
○ Optimized layout for two floors in the fivestory Mesit production plant to allow for the
relocation of Sady production lines into Mesit; the purpose of the relocations was for the
installation of the HybridElectric Vehicle Pilot Line in Sady, the only site in Europe to have
the cleanroom technology for the production of HEV capacitors
○ Designed the layout and material flow for the Sady HEV production line within the
necessary footprint avoid the capital expenditure of building an expansion hall
○ Created business case to support upper management in the selection on which production
lines to transfer to Mesit
● Project: Technologies Transfer Due Diligence + Plant Optimization
● Location: TPC Production Plant, Dijon, France
● Year(s): 2011
● Project Functions: Industrial Engineer, Technical Lead, Business Case Analyst
○ Performed due diligence (capabilities, capacities, and floorspace requirements) for the
highvoltage capacitors equipment to determine the optimal location for the distribution of
production throughout the three worldwide regions: America, Europe, and Asia
○ Developed layouts for the purpose of relocating equipment into any of the chosen locations
and a decision matrix to present the business case to upper management to relocate to
Asia to increase segment profitability
○ Worked with the team in France to translate process documents and provided corporate
management with process information previously unavailable in English
● Project: Relocation of the North America Distribution Center
● Location: Atlanta, Georgia, USA; Greenville, South Carolina, USA; Dallas, TX, USA
● Year(s): 20112013
● Project Functions: Industrial Engineer, Technical Lead, Business Case Analyst
○ Transferred the America Region distribution center from Atlanta, GA to Fountain Inn, SC
without disruption to operations; planned, procured, and implemented automated
warehouse in SC
○ Built business case for an automatedcarousel warehouse system, which was implemented,
resulting in a reduction of 24K sqft. for the DC and improved pick, putaway, and inventory
accuracy
○ Developed the warehouse management system technical requirements as well as the
hardware requirements alongside a team of consultants experts in the field of warehouse
management systems
○ Negotiated and managed all contracts for the facilitation of the chosen site in Fountain Inn,
SC; managed the shutdown of the Atlanta facility, inclusive of contractors and utilities billing
○ Headcount reduced from 40 to 16 direct associates as per the increased productivity of the
automated carousels and the smartcontrols installed to improve efficiency of the system;
directlabor reductions of 400K+ per year, providing an ROI for the initial capital investment
of less than three years
8. ● Project: AVX/Kyocera Sales Office Consolidation
● Location: Penang, Malaysia
● Year(s): 2011
● Project Functions: Industrial Engineer
○ Designed the layout for the merger of the AVX and Kyocera sales offices in Penang
○ Supervised contractors from Dijon,France to keep to scope and quoted costs
Corporate Functions and Events
● Prepared external presentations for the Executive Officers, Board of Directors, and VicePresidents
● Planned and ran the 2011 and 2012 Meeting of Shareholders; attendees include the Board of
Directors, Chairman Emeritus, and several highprofile executives from all regions; planning
includes all event presentations, event layout, audio/video, and accommodations for translators
● Planned and ran the 2011 AVX University, a oneweek seminar hosted by upper management for
the highestperforming associates and middlemanagement in AVX Corporation from all worldwide
regions
● Designed the AVX Corporation Christmas Float; Winner of “Best Float” in the 2013 Greenville
Poinsettia Christmas Parade
Software Proficiency: AutoCAD, Microsoft Office, Microsoft Project, Microsoft Visio, APIS IQSoftware
Languages (Native): English, Spanish