Kramer VM-100CB
•
0 likes•30 views
The VM-100CB is a 1U rack mountable component video distribution amplifier that takes one component video input and distributes it to ten identical outputs. It provides high bandwidth distribution of up to 450MHz for HDTV signals, with level and equalization controls to adjust the output signal. The amplifier isolates and buffers the input signal to distribute identical copies to each of the ten BNC output connectors.
Report
Share
Report
Share
Download to read offline
Recommended
Kramer VM-100C
The VM-100C is a 1U rack mountable component video distribution amplifier that takes one component video input and distributes it to 10 identical outputs. It has a high bandwidth of 450MHz and is compatible with HDTV. It provides correct buffering and isolation of the input signal and distributes it to the 10 outputs via RCA connectors. It has controls for level and equalization, as well as selectable input termination and a looping input.
Kramer VM-1045
The VM-1045 is a 1U rack mountable component video distribution amplifier that can distribute either a composite video, s-video, or component video signal from one input across up to five outputs. It has a high bandwidth of 415MHz and features such as individually adjustable gain and equalization controls for each channel to optimize the signal quality across multiple displays. The VM-1045 is compatible with HDTV signals and provides high quality distribution of video with low differential gain, phase, and crosstalk between outputs.
Kramer VM-92
The VM-92 is a 9 channel video distribution amplifier that can be configured to distribute composite, s-Video, component, or RGBS video signals across up to 18, 8, 6, or 2 outputs respectively. It has a bandwidth of 500MHz and is compatible with HDTV signals. Each channel has independently controllable equalization and input termination. It is housed in a standard 1U rack mount case and has a worldwide power supply.
Kramer VM-1042
The VM-1042 is a 1U rack mountable distribution amplifier that can split a single RGBS or component video input signal into four outputs while maintaining high bandwidth of 200MHz and supporting HDTV formats. It has four BNC inputs that can each be configured to split the signal into two outputs, allowing uses such as splitting a single component video signal into eight outputs. Key specifications include less than 0.05% differential gain and phase, 200MHz bandwidth, and 73dB S/N ratio.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VM-25
The VM-25 is a 1U rack mountable distribution amplifier that takes one composite video input signal and distributes it to 25 identical outputs while maintaining high bandwidth of 430MHz and low distortion. It provides looped input and output connections as well as controls for level and equalization. The unit is powered by a 12V DC power supply and measures 19" x 7" x 1U.
Kramer VM-10-YCXL
The VM-10YCxl is a 1:10 distribution amplifier that can distribute both composite video and S-video (Y/C) signals, along with stereo audio, to 10 outputs. It features built-in format conversion between composite and S-video and can convert either the composite video or S-video input to the other format for distribution. It has looping inputs, output signal termination, video AC/DC coupling selection, and PAL/NTSC programmable switches.
Kramer 105-VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering and isolation. It has a bandwidth of 400MHz, uses BNC connectors, and includes a level control as well as rack mounting options. The device is compact at 12cm x 7.5cm x 2.5cm and has technical specifications including a maximum output of 2Vpp, differential gain of 0.1%, and S/N ratio of 80dB.
Recommended
Kramer VM-100C
The VM-100C is a 1U rack mountable component video distribution amplifier that takes one component video input and distributes it to 10 identical outputs. It has a high bandwidth of 450MHz and is compatible with HDTV. It provides correct buffering and isolation of the input signal and distributes it to the 10 outputs via RCA connectors. It has controls for level and equalization, as well as selectable input termination and a looping input.
Kramer VM-1045
The VM-1045 is a 1U rack mountable component video distribution amplifier that can distribute either a composite video, s-video, or component video signal from one input across up to five outputs. It has a high bandwidth of 415MHz and features such as individually adjustable gain and equalization controls for each channel to optimize the signal quality across multiple displays. The VM-1045 is compatible with HDTV signals and provides high quality distribution of video with low differential gain, phase, and crosstalk between outputs.
Kramer VM-92
The VM-92 is a 9 channel video distribution amplifier that can be configured to distribute composite, s-Video, component, or RGBS video signals across up to 18, 8, 6, or 2 outputs respectively. It has a bandwidth of 500MHz and is compatible with HDTV signals. Each channel has independently controllable equalization and input termination. It is housed in a standard 1U rack mount case and has a worldwide power supply.
Kramer VM-1042
The VM-1042 is a 1U rack mountable distribution amplifier that can split a single RGBS or component video input signal into four outputs while maintaining high bandwidth of 200MHz and supporting HDTV formats. It has four BNC inputs that can each be configured to split the signal into two outputs, allowing uses such as splitting a single component video signal into eight outputs. Key specifications include less than 0.05% differential gain and phase, 200MHz bandwidth, and 73dB S/N ratio.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VM-25
The VM-25 is a 1U rack mountable distribution amplifier that takes one composite video input signal and distributes it to 25 identical outputs while maintaining high bandwidth of 430MHz and low distortion. It provides looped input and output connections as well as controls for level and equalization. The unit is powered by a 12V DC power supply and measures 19" x 7" x 1U.
Kramer VM-10-YCXL
The VM-10YCxl is a 1:10 distribution amplifier that can distribute both composite video and S-video (Y/C) signals, along with stereo audio, to 10 outputs. It features built-in format conversion between composite and S-video and can convert either the composite video or S-video input to the other format for distribution. It has looping inputs, output signal termination, video AC/DC coupling selection, and PAL/NTSC programmable switches.
Kramer 105-VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering and isolation. It has a bandwidth of 400MHz, uses BNC connectors, and includes a level control as well as rack mounting options. The device is compact at 12cm x 7.5cm x 2.5cm and has technical specifications including a maximum output of 2Vpp, differential gain of 0.1%, and S/N ratio of 80dB.
Kramer VM-10AN
The VM-10AN is a distribution amplifier that takes a single composite video and stereo audio input signal and distributes it to 10 identical outputs while maintaining signal quality. It has a bandwidth of 70MHz for video and 20kHz for audio, with low distortion and noise. The unit is compact and can be rack mounted, and it provides looping inputs, selectable input termination, and AC/DC video coupling.
Kramer VM-50V
The VM-50V is a high-performance composite video distribution amplifier that takes one composite video input, buffers and isolates the signal, and distributes it to five identical outputs. It has a bandwidth of 480MHz, a compact desktop size, and can be rack mounted. The amplifier provides accurate signal distribution with low differential gain, phase, and K-factor.
Kramer VM-54
The VM-54 is a dual-mode distribution amplifier that can be configured to distribute either composite/SDI or component video signals to up to 54 or 18 outputs respectively. It provides controls to compensate for signal losses over long cable runs and has a high bandwidth of 365MHz to support HDTV signals. The amplifier offers grouped level and equalization controls, video AC/DC coupling selection, and looping inputs.
Kramer VM-2C
The VM-2C is a high performance component video distribution amplifier that takes one component video input signal and distributes it to two identical outputs. It provides correct buffering and isolation of RGB/YUV signals with a bandwidth of 510MHz and is compatible with HDTV. The compact device can be rack mounted in 1U of space and includes features such as low distortion, high S/N ratio, and DC coupling.
Kramer VM-5-YCXL
The VM-5YCxl is a 1U rack mountable distribution amplifier that can distribute either a composite video signal or s-Video (Y/C) signal to 5 outputs along with stereo audio. It has built-in format conversion allowing either input signal type to be distributed as both composite video and s-Video outputs. It provides high bandwidth distribution up to 300MHz for video and 100kHz for audio along with looping inputs and multiple output connection options.
Kramer VS-33-VXL
The VS-33Vxl is a 3-input, 1-output video switcher that switches composite video signals during the vertical interval for glitch-free switching. It has a bandwidth of 46MHz and features genlock capability and contact closure remote switching. The compact design allows up to 3 units to mount side-by-side in a 1U rack space using an optional rack adapter.
Kramer VM-100C
The VM-100C is a 1U rack mountable component video distribution amplifier that takes one component video input and distributes it to 10 identical outputs. It has a high bandwidth of 450MHz and is compatible with HDTV. It provides correct buffering and isolation of the input signal and distributes it to the 10 outputs via RCA connectors. It has controls for level and equalization, as well as selectable input termination and a looping input.
Kramer VM-1045
The VM-1045 is a 1U rack mountable component video distribution amplifier that can distribute either a composite video, s-video, or component video signal from one input across up to five outputs. It has a high bandwidth of 415MHz and features such as individually adjustable gain and equalization controls for each channel to optimize the signal quality across multiple displays. The VM-1045 is compatible with HDTV signals and provides high quality distribution of video with low differential gain, phase, and crosstalk between outputs.
Kramer VM-92
The VM-92 is a 9 channel video distribution amplifier that can be configured to distribute composite, S-video, component, or RGB video signals. It provides high bandwidth up to 500MHz and supports HDTV signals. Each of the 9 channels includes a looping input and distributed output, and there are controls for equalization and input signal termination on each channel. The unit is designed for rack mounting and has a worldwide power supply.
Kramer VM-25
The VM-25 is a 1U rack mountable distribution amplifier that takes one composite video input signal and distributes it to 25 identical outputs while maintaining high bandwidth of 430MHz and low distortion. It provides looped input and output connections as well as controls for level and equalization. The unit is powered by a 12V DC power supply and measures 19" x 7" x 1U.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VP-10
The VP-10 is a high-performance video distribution amplifier that distributes RGBHV video signals to 10 identical outputs while providing correct buffering and isolation. It has a bandwidth of 350MHz, is HDTV compatible, and includes controls for output level, equalization, and input signal termination. The VP-10 meets technical specifications for differential gain, phase, K-factor, signal-to-noise ratio, crosstalk, and operates on 230V AC power.
Kramer VP-10
The VP-10 is a high-performance distribution amplifier that distributes RGBHV video signals to 10 identical outputs while providing correct buffering and isolation. It has a bandwidth of 350MHz, is HDTV compatible, and includes controls for output level, equalization, and input signal termination. The VP-10 meets technical specifications for differential gain, phase, K-factor, signal-to-noise ratio, crosstalk, and operates on 230V AC power.
Kramer VP-10
The VP-10 is a high-performance distribution amplifier that distributes RGBHV video signals to 10 identical outputs while providing correct buffering and isolation. It has a bandwidth of 350MHz, is HDTV compatible, and includes controls for output level, equalization, and input signal termination. The VP-10 meets technical specifications for differential gain, phase, K-factor, signal-to-noise ratio, crosstalk, and operates on 230V AC power.
Kramer VM-9YC
The VM-9YC is a high-performance s-Video distribution and line amplifier that can compensate for signal losses over long cable runs. It has one looping s-Video input and two outputs, with controls for adjusting the Y and C signal levels and phase. It has a bandwidth of 320MHz and low distortion. Measuring only 8.6" x 7" x 1.7", it can fit in a 1U rack space with an optional adapter.
Kramer VM-9YC
The VM-9YC is a high-performance s-Video distribution and line amplifier that can compensate for signal losses over long cable runs. It has one looping s-Video input and two outputs, with controls for adjusting the Y and C signal levels and phase. It has a bandwidth of 320MHz and low distortion. Measuring only 8.6" x 7" x 1.7", it can fit in a 1U rack space with an optional adapter.
Kramer VM-9T
The VM-9T is a distribution amplifier that takes in one composite video signal and one stereo audio signal as input. It provides buffering and isolation and distributes the identical input signals to two output BNC connectors for video and two output RCA connectors for audio. It also distributes the signals over twisted pair cable through an RJ-45 connector, allowing distribution over long distances. It has controls for video level, audio level, and video equalization and can operate over a wide range of power voltages.
Kramer VM-9T
The VM-9T is a distribution amplifier that takes in one composite video signal and one stereo audio signal as input. It provides buffering and isolation and distributes the identical input signals to two output BNC connectors for video and two output RCA connectors for audio. It also distributes the signals over twisted pair cable through an RJ-45 connector, allowing distribution over long distances. It has controls for video level, audio level, and video equalization and can operate over a wide range of power voltages.
Kramer VM-1042
The VM-1042 is a 1U rack mountable distribution amplifier that can split a single RGBS or component video input signal into four outputs while maintaining high bandwidth of 200MHz and supporting HDTV formats. It has four BNC inputs that can each be configured to split the signal into two outputs, allowing uses such as splitting a single component video source into eight outputs. Key specifications include less than 0.05% differential gain and phase, 200MHz bandwidth, and 73dB S/N ratio.
Kramer VM-100YC
The VM-100YC is a high-performance s-Video distribution amplifier that takes a single s-Video input signal and distributes an identical copy of that signal to ten outputs. It provides correct buffering and isolation of the signal. It has adjustable level controls for the Y and C components, selectable input termination, and a bandwidth of 275MHz. The unit is compact and can be rack mounted.
More Related Content
What's hot
Kramer VM-10AN
The VM-10AN is a distribution amplifier that takes a single composite video and stereo audio input signal and distributes it to 10 identical outputs while maintaining signal quality. It has a bandwidth of 70MHz for video and 20kHz for audio, with low distortion and noise. The unit is compact and can be rack mounted, and it provides looping inputs, selectable input termination, and AC/DC video coupling.
Kramer VM-50V
The VM-50V is a high-performance composite video distribution amplifier that takes one composite video input, buffers and isolates the signal, and distributes it to five identical outputs. It has a bandwidth of 480MHz, a compact desktop size, and can be rack mounted. The amplifier provides accurate signal distribution with low differential gain, phase, and K-factor.
Kramer VM-54
The VM-54 is a dual-mode distribution amplifier that can be configured to distribute either composite/SDI or component video signals to up to 54 or 18 outputs respectively. It provides controls to compensate for signal losses over long cable runs and has a high bandwidth of 365MHz to support HDTV signals. The amplifier offers grouped level and equalization controls, video AC/DC coupling selection, and looping inputs.
Kramer VM-2C
The VM-2C is a high performance component video distribution amplifier that takes one component video input signal and distributes it to two identical outputs. It provides correct buffering and isolation of RGB/YUV signals with a bandwidth of 510MHz and is compatible with HDTV. The compact device can be rack mounted in 1U of space and includes features such as low distortion, high S/N ratio, and DC coupling.
Kramer VM-5-YCXL
The VM-5YCxl is a 1U rack mountable distribution amplifier that can distribute either a composite video signal or s-Video (Y/C) signal to 5 outputs along with stereo audio. It has built-in format conversion allowing either input signal type to be distributed as both composite video and s-Video outputs. It provides high bandwidth distribution up to 300MHz for video and 100kHz for audio along with looping inputs and multiple output connection options.
Kramer VS-33-VXL
The VS-33Vxl is a 3-input, 1-output video switcher that switches composite video signals during the vertical interval for glitch-free switching. It has a bandwidth of 46MHz and features genlock capability and contact closure remote switching. The compact design allows up to 3 units to mount side-by-side in a 1U rack space using an optional rack adapter.
What's hot (6)
Similar to Kramer VM-100CB
Kramer VM-100C
The VM-100C is a 1U rack mountable component video distribution amplifier that takes one component video input and distributes it to 10 identical outputs. It has a high bandwidth of 450MHz and is compatible with HDTV. It provides correct buffering and isolation of the input signal and distributes it to the 10 outputs via RCA connectors. It has controls for level and equalization, as well as selectable input termination and a looping input.
Kramer VM-1045
The VM-1045 is a 1U rack mountable component video distribution amplifier that can distribute either a composite video, s-video, or component video signal from one input across up to five outputs. It has a high bandwidth of 415MHz and features such as individually adjustable gain and equalization controls for each channel to optimize the signal quality across multiple displays. The VM-1045 is compatible with HDTV signals and provides high quality distribution of video with low differential gain, phase, and crosstalk between outputs.
Kramer VM-92
The VM-92 is a 9 channel video distribution amplifier that can be configured to distribute composite, S-video, component, or RGB video signals. It provides high bandwidth up to 500MHz and supports HDTV signals. Each of the 9 channels includes a looping input and distributed output, and there are controls for equalization and input signal termination on each channel. The unit is designed for rack mounting and has a worldwide power supply.
Kramer VM-25
The VM-25 is a 1U rack mountable distribution amplifier that takes one composite video input signal and distributes it to 25 identical outputs while maintaining high bandwidth of 430MHz and low distortion. It provides looped input and output connections as well as controls for level and equalization. The unit is powered by a 12V DC power supply and measures 19" x 7" x 1U.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer 105VB
The 105VB is a 1-input, 5-output composite video distribution amplifier that takes a single composite video signal as input and distributes it to five identical outputs while providing correct buffering, isolation, and a bandwidth of 400MHz (-3dB). It has BNC connectors, a level control, and can be rack mounted. The device is powered by a 12V DC power supply and has dimensions of 12cm x 7.5cm x 2.5cm.
Kramer VM-1021
The VM-1021 is a 1U rack mountable distribution amplifier that takes a single composite or SDI video input signal and distributes it to 20 outputs. It provides controls for adjusting the signal level and equalization to compensate for losses over long cable runs. The amplifier has a bandwidth of 350MHz and specifications including less than 0.1% differential gain and phase, 0.05% K-factor, and 74dB signal to noise ratio.
Kramer VP-10
The VP-10 is a high-performance video distribution amplifier that distributes RGBHV video signals to 10 identical outputs while providing correct buffering and isolation. It has a bandwidth of 350MHz, is HDTV compatible, and includes controls for output level, equalization, and input signal termination. The VP-10 meets technical specifications for differential gain, phase, K-factor, signal-to-noise ratio, crosstalk, and operates on 230V AC power.
Kramer VP-10
The VP-10 is a high-performance distribution amplifier that distributes RGBHV video signals to 10 identical outputs while providing correct buffering and isolation. It has a bandwidth of 350MHz, is HDTV compatible, and includes controls for output level, equalization, and input signal termination. The VP-10 meets technical specifications for differential gain, phase, K-factor, signal-to-noise ratio, crosstalk, and operates on 230V AC power.
Kramer VP-10
The VP-10 is a high-performance distribution amplifier that distributes RGBHV video signals to 10 identical outputs while providing correct buffering and isolation. It has a bandwidth of 350MHz, is HDTV compatible, and includes controls for output level, equalization, and input signal termination. The VP-10 meets technical specifications for differential gain, phase, K-factor, signal-to-noise ratio, crosstalk, and operates on 230V AC power.
Kramer VM-9YC
The VM-9YC is a high-performance s-Video distribution and line amplifier that can compensate for signal losses over long cable runs. It has one looping s-Video input and two outputs, with controls for adjusting the Y and C signal levels and phase. It has a bandwidth of 320MHz and low distortion. Measuring only 8.6" x 7" x 1.7", it can fit in a 1U rack space with an optional adapter.
Kramer VM-9YC
The VM-9YC is a high-performance s-Video distribution and line amplifier that can compensate for signal losses over long cable runs. It has one looping s-Video input and two outputs, with controls for adjusting the Y and C signal levels and phase. It has a bandwidth of 320MHz and low distortion. Measuring only 8.6" x 7" x 1.7", it can fit in a 1U rack space with an optional adapter.
Kramer VM-9T
The VM-9T is a distribution amplifier that takes in one composite video signal and one stereo audio signal as input. It provides buffering and isolation and distributes the identical input signals to two output BNC connectors for video and two output RCA connectors for audio. It also distributes the signals over twisted pair cable through an RJ-45 connector, allowing distribution over long distances. It has controls for video level, audio level, and video equalization and can operate over a wide range of power voltages.
Kramer VM-9T
The VM-9T is a distribution amplifier that takes in one composite video signal and one stereo audio signal as input. It provides buffering and isolation and distributes the identical input signals to two output BNC connectors for video and two output RCA connectors for audio. It also distributes the signals over twisted pair cable through an RJ-45 connector, allowing distribution over long distances. It has controls for video level, audio level, and video equalization and can operate over a wide range of power voltages.
Kramer VM-1042
The VM-1042 is a 1U rack mountable distribution amplifier that can split a single RGBS or component video input signal into four outputs while maintaining high bandwidth of 200MHz and supporting HDTV formats. It has four BNC inputs that can each be configured to split the signal into two outputs, allowing uses such as splitting a single component video source into eight outputs. Key specifications include less than 0.05% differential gain and phase, 200MHz bandwidth, and 73dB S/N ratio.
Kramer VM-100YC
The VM-100YC is a high-performance s-Video distribution amplifier that takes a single s-Video input signal and distributes an identical copy of that signal to ten outputs. It provides correct buffering and isolation of the signal. It has adjustable level controls for the Y and C components, selectable input termination, and a bandwidth of 275MHz. The unit is compact and can be rack mounted.
Kramer VM-100YC
The VM-100YC is a high-performance s-Video distribution amplifier that takes a single s-Video input signal and distributes an identical copy of that signal to ten outputs. It provides correct buffering and isolation of the signal. Key features include a bandwidth of 275MHz for the Y channel, looping input, level controls for the Y and C channels, and a selectable input termination switch. It has a compact desktop size but can also be rack mounted.
Kramer VM-50V
The VM-50V is a high-performance composite video distribution amplifier that takes one composite video input, buffers and isolates the signal, and distributes it to five identical outputs. It has a bandwidth of 480MHz, selectable input termination, and a compact desktop size that can also be rack mounted. The amplifier distributes signals with less than 0.05% differential gain and phase, powered by a 12V DC power supply.
Kramer VS-61YC
The VS-61YC is a 6-input, 1-output s-Video and balanced stereo audio switcher that switches signals during the vertical interval for glitch-free switching. It can synchronize to an external reference or incoming video and is controlled via front panel, RS-232, RS-485 or contact closure. The switcher has bandwidth of 250MHz for s-Video and 100kHz for audio, with less than 0.1% total harmonic distortion and crosstalk below -62.8dB.
Kramer VS-61YC
The VS-61YC is a 6-input, 1-output s-Video and balanced stereo audio switcher that switches signals during the vertical interval for glitch-free switching. It can synchronize to an external reference or incoming video and is controlled via front panel, RS-232, RS-485 or contact closure. The switcher has bandwidth of 250MHz for s-Video and 100kHz for audio, with less than 0.1% total harmonic distortion and crosstalk below -62.8dB.
Similar to Kramer VM-100CB (20)
More from AV ProfShop
Decimator MD-HX hardware-manual_fv1.3
This document provides an overview and operating manual for the MD-HX HDMI/SDI Cross Converter. The MD-HX can simultaneously convert between HDMI and SDI while supporting 3G, HD, and SD formats. It also includes scaling and frame rate conversion capabilities. The operating manual describes the unit's four operation modes and provides details on its menu system for controlling inputs, outputs, scaling settings, and other parameters using the front panel LCD and buttons.
Panasonic AV-HS410 Multiformat Vision Mixer HD/SD
The AV-HS410 is a live production switcher that provides:
1) High-end performance and functions in a compact body, including 9 video inputs, 6 outputs, chroma keying, transitions, and memory functions.
2) An intuitive user interface designed for live operation, with a built-in LCD monitor, memory preview, and multi-viewer display.
3) Expandability through optional input/output boards and a software development kit to add customized functions.
Panasonic AW-HE40SW/SK/HW/HK PTZ Camera with HD-SDI / HDMI Output
The document provides specifications for Panasonic's AW-HE40 series of integrated full HD cameras. It has a 30x optical zoom lens and supports Power over Ethernet Plus (PoE+) for installation flexibility. The cameras feature a 1/2.3-type MOS sensor, 30x optical zoom lens, 40x total zoom with super resolution, and support various outputs including HDMI, SDI, and IP. They can be controlled remotely over IP from devices like PCs and smartphones.
Sony MCX-500 Live Production Switcher
The MCX-500 is an affordable multi-camera live production switcher that allows a single operator to mix up to 8 video sources plus titles for live events. It provides professional 3G-SDI, HDMI, and composite video inputs along with integrated recording to SD cards. The switcher offers features like chroma keying, transitions, picture-in-picture, and live streaming for engaging live productions and events. Controls are designed for intuitive single-operator use but can also be controlled remotely via tablet or PC.
JVC GY-HM200 GY-HM170 Brochure AVProfShop
The document describes two compact 4K camcorders, the GY-HM200 and GY-HM170. Both cameras feature a 12x optical zoom lens, 4K video recording at up to 150Mbps to SD cards, HD recording up to 50Mbps in 4:2:2 color sampling, and dual SD card slots. The GY-HM200 additionally offers live streaming of HD video over WiFi or 4G LTE while continuing to record locally.
JVC GY-HM620 Brochure AVProfShop
The document provides information on the JVC GY-HM620 HD/SD memory card camcorder. It summarizes the key features as having a 23x Fujinon lens, 3 full HD 1/3-inch CMOS sensors, and a FALCONBRID image processing engine for superior image quality. It records in multiple formats including MOV, MP4, and AVCHD and has dual SD card slots for simultaneous or relay recording. The camcorder offers various professional features such as XLR audio inputs, timecode sync, and HDMI and SDI outputs.
JVC GY-HM660 Brochure AVProfShop
The document summarizes the features of the JVC GY-HM660 HD/SD memory card camcorder. It can live stream in full HD up to 12Mbps via Wi-Fi, 4G LTE, or Ethernet. It has a 23x optical zoom lens, dual SD card slots, and records to multiple formats including H.264 up to 50Mbps. The camcorder also has advanced connectivity including SDI and HDMI outputs, USB ports, and XLR audio inputs for professional video applications such as electronic news gathering.
Datavideo MS-2800 Brochure
This document provides an overview of the MS-2800 mobile video studio system and its components. It includes diagrams showing how the various components such as cameras, switchers, audio mixers, and monitors connect together via SDI and audio cables. Key components highlighted include the MS-2800A/B 12-channel mobile video switchers, DAC-60 SDI to VGA converters, AM-100 audio mixer, and NVS-20 video streaming server.
Datavideo HS-2800 Brochure
The document is a 2012-2013 product guide that describes the HS-2800, a 12-channel portable video studio. The HS-2800 features dual PIP and dual DSK inputs, 8 HD-SDI inputs and outputs, HDMI connectivity, and can be used with accessories like a 42" LCD monitor, digital video recorder, audio mixer, and WiFi bridging unit.
Datavideo DVK-200 Brochure
The Datavideo DVK-200 is a standalone chromakey solution that allows users to create virtual studio effects without complicated software. It supports connections from video, computer, and DVI sources and can key against blue, green, white, or black backgrounds. The DVK-200 has advanced key adjustments, input/output options, and can be controlled via RS-232. It is suitable for education, small studios, wedding videography, and other applications.
Datavideo ITC-100 Brochure
The Datavideo ITC-100 Intercom system provides clear communication between production crew members through an 8-channel intercom setup. It features a standard 1U rack design for easy integration into existing systems. Each channel supports talkback functions as well as dual color tally lights to indicate speaker status. Communication can occur between individuals or broadcast to all channels simultaneously from the director. The system helps coordinate camera operators, lighting, and more from a control room during live productions.
Datavideo RMC-180 Brochure
The RMC-180 is a PTZ camera control unit that can control up to 4 PTC-100 pan, tilt, and zoom cameras. It provides functions like iris, focus, preset positions, and tally indicators for each camera. The RMC-180 integrates easily with Datavideo SE-2000R and HS-2000 HD switchers and allows control over camera balance, noise reduction, and other settings from the switcher. It connects to PTZ cameras via RS-422 and can be controlled over IP through a network video server.
Datavideo SE-600 Brochure
The document provides an overview of an audio/video system setup including various components such as a Datavideo SE-600 8-channel digital video switcher, TLM-170H 17.3" HD/SD LCD monitors, a DN-600 SD digital video recorder, ITC-100 intercom system, DAC-60 SDI to VGA converter, and NVS-20 H.264 video streaming server. The diagram outlines the connections between the components including video, audio, network, and control connections to integrate the system.
Datavideo SE-500 Brochure
The document outlines an audio visual system setup including a 4-channel digital video switcher connected to 7-inch LCD monitors, an SD digital video recorder, and an H.264 video streaming server. The system allows for video and audio switching, recording, streaming, and intercom communication, and includes connections for cameras, projectors, and other peripheral devices. Tally lights indicate the active video and audio sources.
Atomos Range Brochure
1. Atomos produces field monitor-recorders that allow video professionals to record directly from camera sensors to formats like Apple ProRes and Avid DNxHR on affordable HDD/SSD media. Their devices also function as professional monitors, playback devices, and basic editing tools.
2. The document highlights several Atomos product lines - the high-end Shogun Inferno, the mid-range Flame series including the Shogun Flame and Ninja Flame, and the entry-level Blade series. All are designed for professional recording, monitoring, and basic editing functions.
3. A case study describes how the Cloakroom Media production company used a Shogun Flame and N
Sony PXW-Z450
The PXW-Z450 is a new 4K shoulder camcorder from Sony that records using the XAVC format. It has a newly developed 2/3-type Exmor RTM CMOS sensor that provides high quality 4K and HD images. The camcorder is compatible with a wide range of existing HD lenses through its B4 lens mount and also supports 4K lenses. It offers features such as low power consumption, wireless capabilities and flexible recording formats that make it suitable for live news gathering and television production in both 4K and HD.
Datavideo SE-2200 6 input HD broadcast quality switcher
The document provides instructions and specifications for the SE-2200 production switcher. It includes a packing list, descriptions of the front and rear panels, explanations of connection types and ports, and instructions for operating keyboard controls and menu options. Dimensions and technical specifications are also provided.
More from AV ProfShop (20)
Panasonic AW-HE40SW/SK/HW/HK PTZ Camera with HD-SDI / HDMI Output
Panasonic AW-HE40SW/SK/HW/HK PTZ Camera with HD-SDI / HDMI Output
Datavideo SE-2200 6 input HD broadcast quality switcher
Datavideo SE-2200 6 input HD broadcast quality switcher
Recently uploaded
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Recently uploaded (20)
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Kramer VM-100CB
- 1. VM-100CB 1:10 Component Video Distribution Amplifier The VM-100CB is a high- performance distribution amplifier for component video signals. It takes one input, provides correct buffering and isolation, and distributes the signal to ten identical outputs on BNC connectors.
- 2. VM-100CB FEATURES TECHNICAL SPECIFICATIONS High Bandwidth (Y) - 450MHz (-3dB). INPUT: 1 component video (Y, Pb/Cb, HDTV Compatible. Pr/Cr), looping on BNC Level (Gain) and EQ (Peaking) Controls. connectors. Looping Input. OUTPUTS: 10 component video (Y, Selectable Input Signal Termination. Pb/Cb, Pr/Cr) on BNC connectors. Worldwide Power Supply - 100-240V AC. MAX. OUTPUT 2.2Vpp. Standard 19” Rack Mount Size - 1U. LEVEL: BANDWIDTH (- 450MHz. 3dB): DIFF. GAIN: 0.03%. DIFF. PHASE: 0.03Deg. K-FACTOR: <0.05%. S/N RATIO: 74dB. CROSSTALK (all –56dB @5MHz hostile): CONTROLS: Level: –1dB to +6.4dB; EQ.: 0dB to +7.5dB. COUPLING: DC. POWER SOURCE: 100-240V AC, 50/60Hz; 11VA. DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable. WEIGHT: 2.7kg (6lbs) approx. ACCESSORIES: Power cord.