This trainer skills matrix document provides information on Rory Prosser's qualifications, licenses, permits, and industry experience to demonstrate their competency in training and assessing rigging, scaffolding, crane operation, and forklift operation qualifications. The document lists Rory's training, assessment, and vocational qualifications including certificates in first aid, working at heights, confined spaces, traffic control, building and construction, and licenses to perform various rigging, scaffolding and crane operation duties. It also outlines Rory's experience working in industries such as power, smelting, petrochemicals, and pulp and provides evidence of continued professional development activities.

1. LOGO HERE
1
TRAINER SKILLS MATRIX
Trainer/Assessor Name: Rory Prosser
SUMMARY
Training Qualification TAE40110 
Institution: Complex Training Academy Date Issued: 30/09/2013
VET Qualifications Code & Title RTO/ Institution Year
HLTAID003 - Provide First Aid Worksafe Training Centre 2014
RIIWHS204D - Working Safely At Heights Worksafe Training Centre 2014
RIIWHS202D - Enter & Work In Confined Spaces Worksafe Training Centre 2015
RIIWHS205D - Control Traffic With A Stop-Slow Bat Cove 2015
Degrees and Awards

2. LOGO HERE
2
Working with Children Check Yes  No  Expiration Date:
Licenses Type Expiration Date
Worksafe Victoria HRWL # 0001050770
HM LF C2 WP SA CT RA
13/06/2018
OHS Competency of NOHSC : 1006 for Vehicle Loading Crane < 10
metres/tonne
Permits and Tickets EWPAOperator Licence Yellow Card # YC555254, Type : SL;
Spotters Registration Certificate # 6724615
Construction Induction (White Card) # 0005018378
29/06/2020
14/08/2018
---------------
Professional Memberships etc..
Note: Signed copies of all qualifications, licenses and permits must be provided with the matrix.
COMPETENCY MATRIX

3. LOGO HERE
3
Requirement (SNR 15.4/ AQTF 1.4) – Training and assessment is delivered by trainers and assessors who:
 Hold the required training and assessment competencies;
 Have the relevant vocational competencies at least to the level being delivered or assessment;
 Can demonstrate current industry skill directly relevant to the training/assessment undertaken; and
 Continue to develop their VET industry knowledge and skills as well as their industry currency and trainer/assessor competence.
N.B One matrix per qualification delivered and/or assessed
Qualification Code Qualification Title Rigging Stream Deliver Only Deliver and Assess 
Unit Code Unit Title
 Elements
Vocational Qualifications,
Licenses and Permits
Vocational (work) experience and evidence of currency
CPCCLDG3001
A
Licence To Perform Dogging Worksafe HRWL # 0001050770 I have been Dogman qualified since January 2000. I have experience
in Dogging loads for several cranes such as slewing mobile cranes,
Tower cranes, and Favco cranes. I have experience in Dogging loads
from palletized goods, turbines, boilers, piping, personnel lifts, dredger
re-builds, lighting and sound, and containerized loads, and dual-lifts.
All of these lifts have taken place in the power industry, smelting
industry, petro-chemical industry, pulping industry, and staging.
I have also taught Dogging on many occasions, both on the job before
becoming an accredited trainer, and then in the classroom.
CPCCLRG3001
A
Licence To Perform
Rigging - Basic Level
Worksafe HRWL # 0001050770 I have been a Basic Rigger qualified since January 2000. I have Basic
Rigging experience in the form of installing, replacing and maintaining
turbines, boilers, piping, personnel lifts, dredger re-builds, lighting and
sound, gear boxes for large industrial plant, impellers, pumps,
explosion walls, bridges, and containerized loads, and dual-lifts. All of
these lifts have taken place in the power industry, smelting industry,
petro-chemical industry, pulping industry, and staging. I have
also taught Basic Rigging on many occasions, both on the job before

4. LOGO HERE
4
becoming an accredited trainer, and then in the classroom.
CPCCLRG3002
A
Licence To Perform Rigging -
Intermediate Level
Worksafe HRWL # 0001050770 I have been a Intermediate Rigger qualified since September 2006. I
have Intermediate Rigging experience in the form of installing,
replacing and maintaining turbines, boilers, piping, personnel lifts,
dredger re-builds, lighting and sound, gear boxes for large industrial
plant, impellers, pumps, explosion walls, bridges, and containerized
loads, and dual-lifts. All of these lifts have taken place in the power
industry, smelting industry, petro-chemical industry, pulping
industry, and staging. I have also taught Intermediate Rigging on
many occasions, both on the job before becoming an accredited
trainer, and then in the classroom.
CPCCLRG4001
A
Licence To Perform Rigging -
Advanced Level
Worksafe HRWL # 0001050770 I have been an Advanced Rigger qualified since November 2008. I
have Advanced Rigging experience in the form of installing, replacing
and maintaining turbines, boilers, piping, personnel lifts, dredger re-
builds, lighting and sound, gear boxes for large industrial plant,
impellers, pumps, explosion walls, bridges, and containerized loads,
and dual-lifts. All of these lifts have taken place in the power
industry, smelting industry, petro-chemical industry, pulping
industry, and staging.
CPCCLSF200
1A
Licence To Erect And
Dismantle Scaffolding - Basic
Level
Worksafe HRWL # 0001050770 I have been a Basic Scaffolder since some time in 2000 - the exact date
Worksafe was unable to locate. Since I attained my Basic Scaffolding
licence, I have built many modular scaffolds in the form of KwikStage
and Layher. These scaffolds were built around various structures in the
power industry, smelting industry, petro-chemical industry, pulping
industry, and staging. This was to install piping, to gain access for
various trades to certain areas, and provide overhead protection. I have
also taught Basic Scaffolding on the odd occasion in a training
environment, but many times on the work site.

5. LOGO HERE
5
CPCCLSF300
1A
Licence To Erect And
Dismantle Scaffolding -
Intermediate Level
Worksafe HRWL # 0001050770 I have been an Intermediate Scaffolder since March 2001. Since I
attained my Intermediate Scaffolding licence, I have built many tube and
clip scaffolds around various structures in the power industry, smelting
industry, petro-chemical industry, pulping industry, and staging. This
was to install piping, to gain access for various trades to certain areas,
provide scaffolding for concerts and festivals in the form of staging, and
provide overhead protection. I have instructed and supervised
scaffolding at this level many times on the work site.
CPCCLSF4001
A
Licence To Erect And
Dismantle Scaffolding
- Advanced Level
Worksafe HRWL # 0001050770 I have been an Advanced Scaffolder since some time in the mid 2000s -
the exact date Worksafe was unable to locate. Since I attained my
Advanced Scaffolding licence, I have built many modular scaffolds in
the form of KwikStage and Layher, as well as tube and clip scaffolds.
These scaffolds were built around various structures in the power
industry, smelting industry, petro-chemical industry, pulping industry,
and staging. This was to gain access to the inside of hoppers in the
form of drop scaffolds, and also inside turbines, generators and boilers
in the form of suspended scaffolds. Also to install piping, to gain access
for various trades to certain areas, and provide overhead protection.
TLILIC3008A Licence To Operate A Slewing
Mobile Crane (Up To 20 Tonnes)
Worksafe HRWL # 0001050770 I gained my 20 tonne Crane licence in June 2006. Since
then I have operated Franna cranes and slewing cranes of
various models to lift out walkways and gantries, valves,
and piping, and also to hold valves and pumps in position
for alignment. I have only trained and assessed C2 once
as most clients go for C6.
Qualification Code Qualification Title Scaffolding Stream Deliver Only Deliver and Assess 
Unit Code Unit Title
 Elements
Vocational Qualifications,
Licenses and Permits
Vocational (work) experience and evidence of currency

6. LOGO HERE
6
TLILIC200
1A
Licence To Operate A
Forklift Truck
Worksafe HRWL # 0001050770 I obtained my Forklift Truck licence in May 1999, and have operated
them in various industries, such as warehousing, the power industry,
smelting industry, petro-chemical industry, pulping industry, and
staging. I have also taught Forklift on various occasions at three
RTOs.
TLILIC200
5A
Licence To Operate An
Elevated Work Platform
(Boom Length 11 Metres
Or More)
Worksafe HRWL # 0001050770 I obtained my WP licence in June 2006 and have used it
in conjunction with my rigging and scaffolding
qualifications many times since then in the power industry,
smelting industry, petro-chemical industry, pulping
industry, and staging. I've trained and assessed WP
many times.
CPCCLH
S3002A
Licence to operate a materials hoist Worksafe HRWL # 0001050770 I obtained my HM licence in October 2014 so as to use it
in conjunction with training and assessing RB and SB.
CPCCLTC
4001A
Licence to operate a tower crane Worksafe HRWL # 0001050770 I obtained my CT licence in August 2015.
Add for additional units and/or qualifications as required.

7. LOGO HERE
7
PROFSSIONAL DEVELOPMENT RECORD
Activity Date PD Type Details
Further Qualification 15/06/2015 VC, VK CPC40611 - Certificate IV in Building and Construction (Specialist Trades)
Add rows as required
Activity can include: Consulting, Development of Learning Resources, Employment, Conferences, Training Sessions, Networks, Industry Release,
Further Qualification, work in industry etc
Type: Trainer / Assessor Competence (TA), Vocational Competence (VC), and Current VET knowledge and skills (VK), include more than one type if
applicable.
Detail should include a description of the activity with enough detail that it is clear how this activity applies to the type of development and/or qualification
N.B Ensure that copies of event registrations and/or attendance is attached or submitted with this matrix.
Signed: __________________________________ Date: ______________