TIGG Corporation offers Multi-Bag Water Filtration Units with either 6 or 12 bag cavities. The filtration units are constructed of 304 stainless steel and provide reliable and efficient performance in removing suspended solids and gelatinous particles from liquid streams.
Both the 6 and 12 bag units feature Buna seals and heavy-duty swing bolt closures. The equipment operates at up to 150 PSI and 250 ° F.
AIR POLLUTION CONTROL course material by Prof S S JAHAGIRDAR,NKOCET,SOLAPUR for BE (CIVIL ) students of Solapur university. Content will be also useful for SHIVAJI and PUNE university students
Advanced Filtration Company was founded in 1993 as a privately owned engineering representative for manufacturers of filtration, separation and heat transfer equipment. In the intervening years we have honed the company into a resourceful entity for customers to rely on when seeking solutions to the challenges presented in their production and plant utility processes. These challenges could be technical and/ or economical in nature.
AIR POLLUTION CONTROL course material by Prof S S JAHAGIRDAR,NKOCET,SOLAPUR for BE (CIVIL ) students of Solapur university. Content will be also useful for SHIVAJI and PUNE university students
Advanced Filtration Company was founded in 1993 as a privately owned engineering representative for manufacturers of filtration, separation and heat transfer equipment. In the intervening years we have honed the company into a resourceful entity for customers to rely on when seeking solutions to the challenges presented in their production and plant utility processes. These challenges could be technical and/ or economical in nature.
Succession “Losers”: What Happens to Executives Passed Over for the CEO Job?
By David F. Larcker, Stephen A. Miles, and Brian Tayan
Stanford Closer Look Series
Overview:
Shareholders pay considerable attention to the choice of executive selected as the new CEO whenever a change in leadership takes place. However, without an inside look at the leading candidates to assume the CEO role, it is difficult for shareholders to tell whether the board has made the correct choice. In this Closer Look, we examine CEO succession events among the largest 100 companies over a ten-year period to determine what happens to the executives who were not selected (i.e., the “succession losers”) and how they perform relative to those who were selected (the “succession winners”).
We ask:
• Are the executives selected for the CEO role really better than those passed over?
• What are the implications for understanding the labor market for executive talent?
• Are differences in performance due to operating conditions or quality of available talent?
• Are boards better at identifying CEO talent than other research generally suggests?
The CANSORB P Series of Modular Activated Carbon Adsorbers are capable of operations where full backwash is required, including applications for backwashing activated carbon and for use as a multi-media filter. These activated carbon adsorber units are fabricated of PVQ (pressure vessel quality) carbon steel and come equiped with a high solids epoxy lining.
Catálogo Gas boosters ou propulsores de gás - GLOBE Benelux - Aerodynamic Tec...Júlio Gengo
Catálogo Gas boosters ou propulsores de gás - GLOBE Benelux - Aerodynamic Technology - AeroTech
Os propulsores de gás GLOBE são sem óleo com pressões de ar de até 1500 bar. Eles estão disponíveis em performances de ação simples, dupla ação e duas fases. Os gases adequados para os propulsores de gás GLOBE são ar, nitrogênio, gases nobres, oxigênio, hidrogênio, gás natural e várias misturas gasosas.
Os propulsores de gás acionados a ar GLOBE são fabricados para pressurizar gases até 1725 bar. Exemplos de gases que podem ser pressurizados são nitrogênio, ar comprimido, gás natural, CO2, oxigênio, hidrogênio, argônio, néon, GLP e hélio.
Os propulsores de gás não são lubrificados com uma separação positiva entre o lado de propulsão e o lado onde o gás está sendo comprimido. Esta separação impossibilita a mistura dos gases.
O GLOBE oferece uma ampla gama de propulsores de gás de até altas capacidades com velocidade de ciclagem muito baixa. O booster GLOBE "high capacity" tem uma longa vida útil. Usando as mais recentes tecnologias de vedação torna isso possível.
Os boosters de gás GLOBE estão disponíveis em 3 execuções:
- Agindo sozinho;
- Dupla açao;
- dois estágios;
Mais informações:
+55 (11) 4177-1010 / 2411-1111
vendas@aerotech.ind.br
www.aerotech.ind.br
Water Conservation through re-cycle and re-use, presented by ACC Limited Damo...India Water Portal
This is a presentation from ACC Limited Damodhar Cement Works, one of the finalists at the 5th CII-GBC National
Award for Excellence in Water Management in 2008
The awards are in 2 categories, Within the Fence for work done on minimizing the organisations water footprint, and Beyond the Fence for work done in the community around the industry.
This presentation was in the "Within the Fence" category.
We thank CII and the respective companies for giving us permission to upload these presentations on the India Water Portal website for dissemination to a wider audience.
Take a look at these landscape watering options. Tired of paying for expensive brass valves? Check out the plastic valve options. Save money with rotary nozzles.
At the technology round table strategic presentations on Commercial Refrigeration will be presented by leading industry representatives, followed by a panel discussion.
Succession “Losers”: What Happens to Executives Passed Over for the CEO Job?
By David F. Larcker, Stephen A. Miles, and Brian Tayan
Stanford Closer Look Series
Overview:
Shareholders pay considerable attention to the choice of executive selected as the new CEO whenever a change in leadership takes place. However, without an inside look at the leading candidates to assume the CEO role, it is difficult for shareholders to tell whether the board has made the correct choice. In this Closer Look, we examine CEO succession events among the largest 100 companies over a ten-year period to determine what happens to the executives who were not selected (i.e., the “succession losers”) and how they perform relative to those who were selected (the “succession winners”).
We ask:
• Are the executives selected for the CEO role really better than those passed over?
• What are the implications for understanding the labor market for executive talent?
• Are differences in performance due to operating conditions or quality of available talent?
• Are boards better at identifying CEO talent than other research generally suggests?
The CANSORB P Series of Modular Activated Carbon Adsorbers are capable of operations where full backwash is required, including applications for backwashing activated carbon and for use as a multi-media filter. These activated carbon adsorber units are fabricated of PVQ (pressure vessel quality) carbon steel and come equiped with a high solids epoxy lining.
Catálogo Gas boosters ou propulsores de gás - GLOBE Benelux - Aerodynamic Tec...Júlio Gengo
Catálogo Gas boosters ou propulsores de gás - GLOBE Benelux - Aerodynamic Technology - AeroTech
Os propulsores de gás GLOBE são sem óleo com pressões de ar de até 1500 bar. Eles estão disponíveis em performances de ação simples, dupla ação e duas fases. Os gases adequados para os propulsores de gás GLOBE são ar, nitrogênio, gases nobres, oxigênio, hidrogênio, gás natural e várias misturas gasosas.
Os propulsores de gás acionados a ar GLOBE são fabricados para pressurizar gases até 1725 bar. Exemplos de gases que podem ser pressurizados são nitrogênio, ar comprimido, gás natural, CO2, oxigênio, hidrogênio, argônio, néon, GLP e hélio.
Os propulsores de gás não são lubrificados com uma separação positiva entre o lado de propulsão e o lado onde o gás está sendo comprimido. Esta separação impossibilita a mistura dos gases.
O GLOBE oferece uma ampla gama de propulsores de gás de até altas capacidades com velocidade de ciclagem muito baixa. O booster GLOBE "high capacity" tem uma longa vida útil. Usando as mais recentes tecnologias de vedação torna isso possível.
Os boosters de gás GLOBE estão disponíveis em 3 execuções:
- Agindo sozinho;
- Dupla açao;
- dois estágios;
Mais informações:
+55 (11) 4177-1010 / 2411-1111
vendas@aerotech.ind.br
www.aerotech.ind.br
Water Conservation through re-cycle and re-use, presented by ACC Limited Damo...India Water Portal
This is a presentation from ACC Limited Damodhar Cement Works, one of the finalists at the 5th CII-GBC National
Award for Excellence in Water Management in 2008
The awards are in 2 categories, Within the Fence for work done on minimizing the organisations water footprint, and Beyond the Fence for work done in the community around the industry.
This presentation was in the "Within the Fence" category.
We thank CII and the respective companies for giving us permission to upload these presentations on the India Water Portal website for dissemination to a wider audience.
Take a look at these landscape watering options. Tired of paying for expensive brass valves? Check out the plastic valve options. Save money with rotary nozzles.
At the technology round table strategic presentations on Commercial Refrigeration will be presented by leading industry representatives, followed by a panel discussion.
WOM Cementing and Circulating hose loops utilize the combination of WOM’s swivel joint flexibility and hose design for easy connection and storage for transportation.
Introducing DSI Artisan Birch: Cloned from one of the best trees in all of Europe and grown on poplar plantations in Spain, DSI’s Artisan Birch Garnica Plywood consists of virtually void-free cores and the finest, hand-selected domestic birch faces.
As they are raised on the plantation, experienced tree stewards meticulously prune the trees’ branches. So, when they are harvested and processed, there are no knots, which cause wild-grown trees to have defects and voids.
Searching for a professional wood finish style that looks, feels and smells like quality? DSI’s Designer Series is a collection of 30 stain, paint, glaze and finish options that range in style from contemporary classics to today’s hottest trends. The Designer Series is more than just color in a can. It is a process that involves several steps ranging from prepping to staining and from glazing to distressing.
When it comes to panel products, Distributor Service Inc.’s in-stock inventory is wide and deep. Customers across DSI’s entire eight-facility footprint have access to a truly significant variety of products from North America’s finest wood-product manufacturers.
Plus, DSI’s fleet of more than 40 delivery vehicles cut lead times and drop off large and small orders to professional woodworking shops from Pittsburgh, Pennsylvania to Louisville, Kentucky. And, it is not just the products and the trucks that make DSI special, it’s the knowledgeable sales professionals, many of them woodworkers themselves, who bring value and experience to every customer interaction.
Applying “Wet” Glaze (Vintage or Furniture), Removing “Wet” Glaze (Vintage or Furniture), Spray applied “dry” glaze
Must be used over a catalyzed varnish
Scuff of with Mirlon Total/ Scotch Brite pad
Will hang up in the grain on open grain woods like oak
Dry time – 1 minute and should be removed within 2 – 3 hours
Must be top coated the same day
The purpose of this presentation is to discuss the use of digital video as content for websites, e-mail campaigns, social media and more
However, video is not new anymore and most experienced marketers are already adding video to their mix
In the past, the recording equipment was expensive and the editing software was complicated
Now, HD video recording devices are common place and software is simple to use
When it comes to value-priced birch plywood, DSI caught the tiger by the tail. TigerPly features higher quality cores with less voids, overlaps and thickness inconsistencies. It boasts a superior appearance and performance compared to typical “China Birch” cores. This plywood’s quality is consistent time after time.
M.L. Campbell High Performance Conversion Varnish is a new generation of water white, non-yellowing, self sealing post catalyzed amino alkyds conversion varnish. HP WW CV has excellent application and sanding properties and includes UV absorbers for enhanced UV resistance and color stability. HP WW CV is completely HAPS free and provides an ultra low formaldehyde formula that passes the European Standard E-1 for formaldehyde emissions.
High Performance Conversion Varnish is a new generation of water white, non-yellowing, self sealing post catalyzed conversion varnish. High Performance Water White Conversion Varnish was specifically designed for kitchen cabinets, furniture, millwork and interior wood surfaces that are exposed to moisture, heat and household chemicals.
OLARION Interior 2K Acrylic Polyurethane is M.L. Campbell®’s latest advancement in high-performance wood finishes. POLARION is non-yellowing and offers superior durability, fast dry times and an extended pot life. One catalyst and one mix ratio makes POLARION simple to use and easy to manage. Available in a full range of sheens and packaged in both pails and gallons, POLARION is ideal for conference tables, bar tops, millwork, furniture, cabinets and fixtures.
Using competitive research, SEO techniques and digital marketing best practices to design, implement, and analytically analyze a successful corporate website for mobile and desktop
TIGG provides systems, media and services for industrial air and water adsorption applications. Facility operators, engineers and consultants use TIGG activated carbon equipment in a wide variety of applications to purify product, treat wastewater, abate VOCs or to meet regulatory compliance.
A recent study conducted by an independent environmental laboratory proves that TIGG’s 5DC 12 x 30 activated carbon is effective at removing TTHMs from municipal drinking water. The test was sponsored by a municipality that needed to come into compliance with the EPA’s DPB Stage 2 regulations.
The study sponsor historically had high levels of TTHM in its water that ranged between 105 and 171 µg/L. The municipality talked to TIGG about a water purification adsorption system. While some in the industry insist that coal-based activated carbon is the only effective means of removing disinfection byproducts from municipal drinking water, TIGG experts recommended their 5DC 12 x 30 virgin coconut activated carbon.
The municipality had an independent laboratory run a pilot study using a rapid small-scale column test. They used TIGG’s 5DC 12 x 30 NSF activated carbon, which is designed to remove low concentrations of contaminants from potable water. The laboratory found that initial TTHM concentrations of 138 µg/L were reduced to < 1.0 µg/L following treatment with virgin coconut activated carbon. Based on the scale-up of the testing, it was determined that a full scale carbon adsorber would effectively treat TTHMs for 325 days before the bed needed a changeout.
Not only is coconut-based activated carbon effective, it is typically more economical than coal-based activated carbon. The following report shows the laboratory’s results over a 24-day period.
Funneling the carbon into a conical-shaped pocket at the bottom of the vessel disrupts the even progress of the mass transfer zone as it descends through the bed. It constricts the zone into a small area, thereby promoting early contaminant breakthrough.
The conical vessel internal design specs place an inverted cone waffled with aeration holes at the bottom of the vessel. This funnels the media bed into an underdrain that allows the spent carbon to flush from the vessel without leaving clumps of spent media in the corners at the bottom of the tank. However, plastic nozzles fitted to each aeration hole often break off and come loose. This causes carbon packed into the cone to spill into a catch basket that resembles an inverted witch’s hat. These nozzle fittings can only be repaired during changeout procedures when the entire vessel is emptied of media.
Municipalities use TIGG’s water treatment equipment all across the United States and Canada. Our experts work with consulting firms, engineers and local water authorities to design and manufacture integrated adsorption systems for the removal of drinking water contaminates such as disinfection byproducts, metals, organics and solids through the use of granular activated carbon, sand, multi-media, and resins.
TIGG’s activated carbon adsorption and filtration equipment allows municipal water providers to ensure their customers' drinking water meets or exceeds EPA regulatory guidelines. TIGG can custom design an integrated filtration system to meet your municipal drinking water treatment needs or you can shop our standard municipal drinking water filtration systems:
Municipal drinking water providers looking to quickly come into regulatory compliance or to solve other potable water problems where activated carbon is the answer turn to TIGG to purchase or rent reliable adsorption and filtration vessels and other water-related equipment.
TIGG specializes in adsorption vessels, bulk media supplies and spent carbon exchange services. Our GAC adsorbers are used for removal of disinfection byproducts, metals, organics and solids in the municipal water treatment market. We also provide municipal water treatment operators with multimedia filters, hydropneumatic surge tanks and green sand filtration vessels.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Assuring Contact Center Experiences for Your Customers With ThousandEyes
TIGG Liquid Phase Multi Bag Filters
1. Multi-Bag Water Filtration Units
For Removal of Suspended Solids From Wastewater
T
IGG Corporation offers Multi-Bag Water Filtration
Units with either 6 or 12 bag cavities. The
filtration units are constructed of 304
stainless steel and provide reliable and efficient
performance in removing suspended solids and
gelatinous particles from liquid streams.
Both the 6 and 12 bag units feature Buna
seals and heavy-duty swing bolt closures. The
equipment operates at up to 150 PSI and 250 ° F.
The individual filtration bags are made of
polyester, nomex and PTFE and are available
in sizes 0.5 to 200 microns. These units are
available for both sale and rental.
PRESSURE LOSS vs FLOW RATE
16
14
12
PRESSURE LOSS (PSI)
10
8
6
BFH-6
4 BFH-12
2
0
0 500 1000 1500 2000 2500 3000
FLOW RATE (GPM)
This 6-cavity unit
is available for sale or rent
Model # Cavities Flow Rate Pipe Size Filter Area Diameter Height
BFH-6 6 1050 6” 26.4 26” 68”
BFH-12 12 2100 8” 44.0 36” 79”
Call a TIGG Representative Today at 800-925-0011
TIGG
800-925-0011 TIGG Corporation
www.TIGGtanks.com 1 Willow Avenue
www.TIGG.com Oakdale, PA 15071
Purifying Air & Water
03/13