Tank Erection Sequence
•
1 like•1,129 views
The document is a 15-page sequence for erecting a large storage tank. It details the step-by-step process for assembling the tank parts including the bottom ring, walls, roof, and other components and provides instructions on welding and safety precautions during construction.
Report
Share
Report
Share
Download to read offline
Recommended
Lifting plan
This document provides a crane lifting plan and risk assessment for a lifting operation. It details the crane and lift information, including load details, lifting tackle, and crane setup procedures. Safety procedures are outlined, such as conducting a site inspection, briefing personnel, establishing communication methods, and following weather restrictions. Personnel qualifications and roles are defined. The plan is intended to ensure the lifting operation is carried out safely in compliance with relevant standards and regulations.
Pr 1047 well integrity maintenance
The document provides procedures for well integrity testing of suspended wells. It outlines testing the suspension valve(s) integrity by pressurizing and monitoring for pressure change over 10 minutes. If pressure does not exceed allowable leak rates, the test passes. It also describes testing the downhole plug integrity by bleeding off pressure above the plug and monitoring for returns, failing the test if pressure cannot be bled down or returns exceed storage. The document aims to confirm well suspension and valve integrity for different well types.
Gas Welding Risk Assessment.pdf
The risk assessment document identifies several risks associated with gas welding work and proposes control measures. It analyzes risks from pre-work preparation, unloading equipment, dismantling pipes, hot work activities, vehicle traffic, cleaning and poor housekeeping. Specific hazards include injuries from dropped objects, fires, explosions, toxic fumes, and musculoskeletal disorders. The document recommends procedures like permits, inspections, defined roles, proper PPE, designated areas, and waste disposal to mitigate risks and reduce the likelihood and severity of incidents during the work.
Method statement piping works
The document provides a method statement for piping installation works at the Dabbiya site for the Al Dabbiya Phase-1 Additional Injection Wells Tie-Ins project. It outlines the scope of works, sequence of activities, resources, HSE requirements, and emergency contacts. Piping works will involve transporting prefabricated spools to site, lifting them into position, welding field joints, installing valves, and testing. Welding will follow approved procedures and NDT testing. HSE precautions like PPE and fire safety will be enforced during the medium risk work.
Pipeline integrity assessment with LRUT method
As a product of transportation facility, pipeline sould be having a good integrity. Pipeline failure means that pipeline can not operate both at some segment/section or all of pipeline segment can not deliver product/service as per their function. Or failure of pipeline also means loss of pipeline integrity for some segment pipeline section or all of segment pipeline.
4th
The document discusses blowout preventers, including what they are, the types used, and their specifications and operation. It provides details on ram blowout preventers, annular blowout preventers, and the procedures for function testing and pressure testing blowout preventer stacks. The document is an informative guide on blowout preventer fundamentals, components, and testing requirements.
LEEA -LIFTING INSPECTION ENGINEER CV
AbdulQawi Mohamed Abdo Rashed is a Yemeni national currently residing in Saudi Arabia on a visit visa. He has a bachelor's degree in mechanical engineering and certifications in lifting equipment inspection. He has over 10 years of experience in inspection engineering, mechanical maintenance, and design engineering in Yemen. His roles have included inspecting and certifying heavy lifting equipment, load testing, designing HVAC systems, and mechanical maintenance. He is proficient in English, AutoCAD, Microsoft Office, and familiar with international standards.
Public awareness program for natural gas pipeline safety by Paresh Trivedi
Public Awareness Program for Natural Gas Pipeline Safety Pipeline safety awareness is a shared responsibility! “Prevention through Public”
Recommended
Lifting plan
This document provides a crane lifting plan and risk assessment for a lifting operation. It details the crane and lift information, including load details, lifting tackle, and crane setup procedures. Safety procedures are outlined, such as conducting a site inspection, briefing personnel, establishing communication methods, and following weather restrictions. Personnel qualifications and roles are defined. The plan is intended to ensure the lifting operation is carried out safely in compliance with relevant standards and regulations.
Pr 1047 well integrity maintenance
The document provides procedures for well integrity testing of suspended wells. It outlines testing the suspension valve(s) integrity by pressurizing and monitoring for pressure change over 10 minutes. If pressure does not exceed allowable leak rates, the test passes. It also describes testing the downhole plug integrity by bleeding off pressure above the plug and monitoring for returns, failing the test if pressure cannot be bled down or returns exceed storage. The document aims to confirm well suspension and valve integrity for different well types.
Gas Welding Risk Assessment.pdf
The risk assessment document identifies several risks associated with gas welding work and proposes control measures. It analyzes risks from pre-work preparation, unloading equipment, dismantling pipes, hot work activities, vehicle traffic, cleaning and poor housekeeping. Specific hazards include injuries from dropped objects, fires, explosions, toxic fumes, and musculoskeletal disorders. The document recommends procedures like permits, inspections, defined roles, proper PPE, designated areas, and waste disposal to mitigate risks and reduce the likelihood and severity of incidents during the work.
Method statement piping works
The document provides a method statement for piping installation works at the Dabbiya site for the Al Dabbiya Phase-1 Additional Injection Wells Tie-Ins project. It outlines the scope of works, sequence of activities, resources, HSE requirements, and emergency contacts. Piping works will involve transporting prefabricated spools to site, lifting them into position, welding field joints, installing valves, and testing. Welding will follow approved procedures and NDT testing. HSE precautions like PPE and fire safety will be enforced during the medium risk work.
Pipeline integrity assessment with LRUT method
As a product of transportation facility, pipeline sould be having a good integrity. Pipeline failure means that pipeline can not operate both at some segment/section or all of pipeline segment can not deliver product/service as per their function. Or failure of pipeline also means loss of pipeline integrity for some segment pipeline section or all of segment pipeline.
4th
The document discusses blowout preventers, including what they are, the types used, and their specifications and operation. It provides details on ram blowout preventers, annular blowout preventers, and the procedures for function testing and pressure testing blowout preventer stacks. The document is an informative guide on blowout preventer fundamentals, components, and testing requirements.
LEEA -LIFTING INSPECTION ENGINEER CV
AbdulQawi Mohamed Abdo Rashed is a Yemeni national currently residing in Saudi Arabia on a visit visa. He has a bachelor's degree in mechanical engineering and certifications in lifting equipment inspection. He has over 10 years of experience in inspection engineering, mechanical maintenance, and design engineering in Yemen. His roles have included inspecting and certifying heavy lifting equipment, load testing, designing HVAC systems, and mechanical maintenance. He is proficient in English, AutoCAD, Microsoft Office, and familiar with international standards.
Public awareness program for natural gas pipeline safety by Paresh Trivedi
Public Awareness Program for Natural Gas Pipeline Safety Pipeline safety awareness is a shared responsibility! “Prevention through Public”
Saudi Aramco Inspection Procedure (SAIP)
This document is a proposal from Dirham Mujahid Al-Salah Est. for general contracting, building, road construction, mechanical, electrical maintenance and operation works. It was prepared for the Master Gas Pipeline Phase I Projects Division of the Ministry of Energy, Industry and Mineral Resources in Riyadh, Saudi Arabia, under contract number S6il0032833 with C.A.T. International Co. LTD. The proposal includes the contractor's contact information and credentials.
6 71-0051 rev. 4 standard specification for pipeline construction (onshore)
This document outlines standards and specifications for onshore pipeline construction. It covers the scope of work, which includes clearing and grading the right-of-way, trenching, bending, welding, laying, backfilling, tie-ins and special installations. It references applicable codes and standards. Safety measures are outlined, including requirements when working near existing pipelines, cables and high voltage lines. Specific safety instructions are provided for working within 50 meters of high voltage systems.
Saudi Aramco Inspection Checklist (SAIC)
Dirham Mujahid Al-Salah Est. is a general contracting company based in Saudi Arabia that provides services including general building construction, road construction, mechanical, electrical maintenance and operation works. The document appears to be a Saudi Arabian inspection checklist for a gas pipeline project prepared by Dirham Mujahid Al-Salah Est. in April 2016 for their Projects Division in Riyadh.
W C S - 1 to 50 ques. pdf.pdf
This document contains 52 multiple choice questions about various topics in science and mathematics. The questions cover units of measurement, fractions, percentages, algebra, geometry, density, heat, electricity, and other concepts. For each question there are 4 possible answer choices labelled A, B, C, or D.
Deepwater horizon accident_investigation_static_presentation
The Deepwater Horizon investigation found that well integrity was compromised in multiple ways:
1) The cement barriers did not isolate hydrocarbons as the cement job failed.
2) The mechanical barriers in the shoe track did not prevent hydrocarbon flow.
3) A negative pressure test accepted as successful did not actually prove well integrity, as shown by later pressure increases and flows.
Flange Bolt Chart
This document provides specifications for flanges and bolts for piping systems. It includes tables with information on flange size, bolt quantity, stud size, and end-to-end length for different pipe sizes. The tables cover Class 150, 300, 400, 600 and 900 flanges under product lines such as Series A, B, and others.
Saudi arabian-engineering-standards-saes-j-502
This document establishes standards for the design and construction of analyzer shelters at Saudi Aramco. It specifies requirements for shelters to be pre-engineered, packaged units containing sampling systems, analyzers, ventilation, electrical, and other services. Shelters must be able to withstand Saudi Aramco's environmental conditions and hazardous area classifications. The document provides detailed guidelines on shelter layout, size, location, mechanical/structural design, electrical systems, and other design aspects. It aims to ensure shelters and enclosed analyzers are safely and reliably operated in Saudi Aramco's facilities.
Latihan Asas Pengawal Bendera
Dokumen tersebut memberikan panduan tentang tanggungjawab dan prosedur kerja pengawal bendera. Pengawal bendera bertanggungjawab untuk mengawal lalu lintas kendaraan dengan menggunakan peralatan seperti bendera reflektif dan peluit. Mereka dilatih untuk memberhentikan dan memandu lalu lintas dengan aman serta mengikuti prosedur keselamatan seperti menggunakan pakaian yang mudah dilihat.
252113184 method-statement-for-office-container-and-equipment-mobilization (1)
This document provides a method statement for mobilizing and demobilizing office containers and equipment, as well as general unloading and lifting operations of construction materials and equipment for the Evonik Utility Supply project. It outlines the responsibilities of various roles including the project manager, engineers, safety coordinator, foremen, lifting supervisors, crane operators, riggers, and signalmen. It also describes the required qualifications for personnel and provides an organization chart. The methodology section covers preparatory work, equipment and tools needed, and lifting plans and sequences.
Job safety Analysis
This document provides a job safety analysis for erecting jet fuel storage tanks. It outlines 13 key steps in the erection process and identifies potential hazards at each step, such as falls, being struck by objects, fires, and more. Safety precautions are also listed to mitigate the hazards, including using proper personal protective equipment, restricting access under suspended loads, following proper lifting and staging procedures, and more. The responsibilities of supervisors, riggers, welders and other roles are defined to ensure safety is prioritized throughout the tank erection work.
Resume of jaison varkey QA/QC Inspector welding,coating
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
8 lifting operations with mobile crane risk assessment templates
8 Lifting Operations with mobile crane Risk Assessment Templates
Crane checks on arrival to site
PRIOR TO USE
Access of crane to work areas
Siting and setting up of crane
Lifting of equipment and material
(Mobile crane Operator)
Crane supervision
Crane Maintenance
(revised 06-06-2018)
Process plant troubleshooting
This document outlines challenges in process industries like maximizing production while ensuring quality and safety. It discusses the importance of troubleshooting skills given increasing risks and responsibilities. While most training approaches are too generic or equipment-specific, the presented approach describes a 5-phase troubleshooting methodology including understanding the background, identifying event sequences, analyzing causes, making conclusions, and providing recommendations. The goal is to teach a systematic approach while prioritizing safety.
Method statement of temporary office and fa
The document outlines plans for temporary site facilities for the Dasherkandi Sewage Treatment Plant Project. It details the scope of work, organization structure, construction methodology, safety plans, and site layout. Temporary facilities will include site offices, dormitories, workshops, warehouses, and batching plants. The project aims to treat wastewater from several areas of Dhaka to reduce pollution in the Balu River.
Introduction to CMT.pdf
Cementing is an essential part of the oil and gas drilling process. It is used to provide zonal isolation in a wellbore, creating a barrier between different zones and preventing production fluid from entering unwanted formation areas.
ASSISTANT RIG MECHANIC OFFSHORE
Navas Aboobaker is applying for the position of Mechanical Technician and Assistant Rig Mechanic. He has a diploma in Mechanical Engineering and certifications in rigging and STCW-95. His work experience includes overhauling and installing equipment like generators, mud pumps, drawworks, and BOP systems on various rigs for companies like Lamprell Energy, Hall Worthy, and Enermech. As an assistant rig mechanic, his responsibilities included equipment maintenance, overhauling engines and generators, and dismantling and overhauling various pumps and valves. He is looking to contribute his experience to further his personal and professional growth.
Full report (Petronas Prai)
This document provides a job method statement for testing oxygen concentration in an LPG tank using a Model 3110 Portable Trace Oxygen Analyzer. It outlines the objectives, equipment, manpower, and 14 step process for connecting the analyzer to the LPG tank, regulating pressure and flow, purging the system, taking an oxygen reading, recording results, and disconnecting from the tank. Figures and labels are also provided to identify components of the analyzer.
2016 CRW - An inside look at Kiewit's Crane & Rigging Management System
2016 CRW - An inside look at Kiewit's Crane & Rigging Management SystemSpecialized Carriers & Rigging Association
Learn crane and rigging management systems from one of the top General Contractors in the U.S. known for its comprehensive training and focus on employee safety. This three-part session will provide insight into Kiewit’s essential management principles that you can implement in your company.
The topics include:
new operators: hiring, training and technology
risk assessment and mitigation for cranes on job sites
rigging personnel and qualifications
lift planning and incident reporting
Speaker: Bret Shields, Corporate Crane Compliance Manager, Kiewit Crane Services2
The document provides information about the criteria for developing a rescue plan for working at heights (WAH) activities, including working on temporary or permanent platforms over 6 meters, constructing or dismantling temporary platforms, or working at the edge of a location with a risk of fall. It also provides definitions for descent rescue, cross haul rescue, and stretcher rescue. The multiple choice questions test knowledge of permit to work (PTW) requirements, hot work classifications, gas testing responsibilities, and confined space entry procedures.
RCFA Success of Root Cause Failure Analysis
This document discusses how to make root cause failure analysis (RCFA) a successful business improvement strategy. It notes that while many companies adopt RCFA, they often abandon it when they do not see benefits. RCFA is more effective at finding systematic causes of problems and improving business systems rather than solving individual problems. The document outlines how RCFA works best when the learnings are used to improve broader business processes, not just fix single issues. It provides an example of how taking learnings from an RCFA and implementing them company-wide can prevent numerous future failures and significantly improve performance and profits over the long run.
Fabrication&erection sequence proposal
This document outlines a 16-stage fabrication and erection sequence for a tank storage terminal in Karimun, Indonesia. Stage 1 involves laying the annular plate and bottom plate foundations. Stages 2-4 continue bottom plate laying. Stage 5 completes bottom plate erection and begins the first shell course. Stages 6-8 erect the second shell course and add stairways. Stages 9-14 jack up layers and erect additional shell courses. Stage 15 completes shell laying. Stage 16 involves erecting the roof.
PQ Presentation(BADC) - Rev2
This document provides an overview of Bilad Al-Duha, an Iraqi mechanical contractor. It includes sections on the company history, organization chart, goals, scope of services, equipment, network, activities, project experiences and photos. Bilad Al-Duha has over 800 employees across Iraq and Dubai and provides construction services to the oil, gas and power industries, including pipeline installation, tank construction, and engineering services. The document highlights several past projects and Bilad Al-Duha's capabilities and equipment for mechanical construction activities.
More Related Content
What's hot
Saudi Aramco Inspection Procedure (SAIP)
This document is a proposal from Dirham Mujahid Al-Salah Est. for general contracting, building, road construction, mechanical, electrical maintenance and operation works. It was prepared for the Master Gas Pipeline Phase I Projects Division of the Ministry of Energy, Industry and Mineral Resources in Riyadh, Saudi Arabia, under contract number S6il0032833 with C.A.T. International Co. LTD. The proposal includes the contractor's contact information and credentials.
6 71-0051 rev. 4 standard specification for pipeline construction (onshore)
This document outlines standards and specifications for onshore pipeline construction. It covers the scope of work, which includes clearing and grading the right-of-way, trenching, bending, welding, laying, backfilling, tie-ins and special installations. It references applicable codes and standards. Safety measures are outlined, including requirements when working near existing pipelines, cables and high voltage lines. Specific safety instructions are provided for working within 50 meters of high voltage systems.
Saudi Aramco Inspection Checklist (SAIC)
Dirham Mujahid Al-Salah Est. is a general contracting company based in Saudi Arabia that provides services including general building construction, road construction, mechanical, electrical maintenance and operation works. The document appears to be a Saudi Arabian inspection checklist for a gas pipeline project prepared by Dirham Mujahid Al-Salah Est. in April 2016 for their Projects Division in Riyadh.
W C S - 1 to 50 ques. pdf.pdf
This document contains 52 multiple choice questions about various topics in science and mathematics. The questions cover units of measurement, fractions, percentages, algebra, geometry, density, heat, electricity, and other concepts. For each question there are 4 possible answer choices labelled A, B, C, or D.
Deepwater horizon accident_investigation_static_presentation
The Deepwater Horizon investigation found that well integrity was compromised in multiple ways:
1) The cement barriers did not isolate hydrocarbons as the cement job failed.
2) The mechanical barriers in the shoe track did not prevent hydrocarbon flow.
3) A negative pressure test accepted as successful did not actually prove well integrity, as shown by later pressure increases and flows.
Flange Bolt Chart
This document provides specifications for flanges and bolts for piping systems. It includes tables with information on flange size, bolt quantity, stud size, and end-to-end length for different pipe sizes. The tables cover Class 150, 300, 400, 600 and 900 flanges under product lines such as Series A, B, and others.
Saudi arabian-engineering-standards-saes-j-502
This document establishes standards for the design and construction of analyzer shelters at Saudi Aramco. It specifies requirements for shelters to be pre-engineered, packaged units containing sampling systems, analyzers, ventilation, electrical, and other services. Shelters must be able to withstand Saudi Aramco's environmental conditions and hazardous area classifications. The document provides detailed guidelines on shelter layout, size, location, mechanical/structural design, electrical systems, and other design aspects. It aims to ensure shelters and enclosed analyzers are safely and reliably operated in Saudi Aramco's facilities.
Latihan Asas Pengawal Bendera
Dokumen tersebut memberikan panduan tentang tanggungjawab dan prosedur kerja pengawal bendera. Pengawal bendera bertanggungjawab untuk mengawal lalu lintas kendaraan dengan menggunakan peralatan seperti bendera reflektif dan peluit. Mereka dilatih untuk memberhentikan dan memandu lalu lintas dengan aman serta mengikuti prosedur keselamatan seperti menggunakan pakaian yang mudah dilihat.
252113184 method-statement-for-office-container-and-equipment-mobilization (1)
This document provides a method statement for mobilizing and demobilizing office containers and equipment, as well as general unloading and lifting operations of construction materials and equipment for the Evonik Utility Supply project. It outlines the responsibilities of various roles including the project manager, engineers, safety coordinator, foremen, lifting supervisors, crane operators, riggers, and signalmen. It also describes the required qualifications for personnel and provides an organization chart. The methodology section covers preparatory work, equipment and tools needed, and lifting plans and sequences.
Job safety Analysis
This document provides a job safety analysis for erecting jet fuel storage tanks. It outlines 13 key steps in the erection process and identifies potential hazards at each step, such as falls, being struck by objects, fires, and more. Safety precautions are also listed to mitigate the hazards, including using proper personal protective equipment, restricting access under suspended loads, following proper lifting and staging procedures, and more. The responsibilities of supervisors, riggers, welders and other roles are defined to ensure safety is prioritized throughout the tank erection work.
Resume of jaison varkey QA/QC Inspector welding,coating
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
8 lifting operations with mobile crane risk assessment templates
8 Lifting Operations with mobile crane Risk Assessment Templates
Crane checks on arrival to site
PRIOR TO USE
Access of crane to work areas
Siting and setting up of crane
Lifting of equipment and material
(Mobile crane Operator)
Crane supervision
Crane Maintenance
(revised 06-06-2018)
Process plant troubleshooting
This document outlines challenges in process industries like maximizing production while ensuring quality and safety. It discusses the importance of troubleshooting skills given increasing risks and responsibilities. While most training approaches are too generic or equipment-specific, the presented approach describes a 5-phase troubleshooting methodology including understanding the background, identifying event sequences, analyzing causes, making conclusions, and providing recommendations. The goal is to teach a systematic approach while prioritizing safety.
Method statement of temporary office and fa
The document outlines plans for temporary site facilities for the Dasherkandi Sewage Treatment Plant Project. It details the scope of work, organization structure, construction methodology, safety plans, and site layout. Temporary facilities will include site offices, dormitories, workshops, warehouses, and batching plants. The project aims to treat wastewater from several areas of Dhaka to reduce pollution in the Balu River.
Introduction to CMT.pdf
Cementing is an essential part of the oil and gas drilling process. It is used to provide zonal isolation in a wellbore, creating a barrier between different zones and preventing production fluid from entering unwanted formation areas.
ASSISTANT RIG MECHANIC OFFSHORE
Navas Aboobaker is applying for the position of Mechanical Technician and Assistant Rig Mechanic. He has a diploma in Mechanical Engineering and certifications in rigging and STCW-95. His work experience includes overhauling and installing equipment like generators, mud pumps, drawworks, and BOP systems on various rigs for companies like Lamprell Energy, Hall Worthy, and Enermech. As an assistant rig mechanic, his responsibilities included equipment maintenance, overhauling engines and generators, and dismantling and overhauling various pumps and valves. He is looking to contribute his experience to further his personal and professional growth.
Full report (Petronas Prai)
This document provides a job method statement for testing oxygen concentration in an LPG tank using a Model 3110 Portable Trace Oxygen Analyzer. It outlines the objectives, equipment, manpower, and 14 step process for connecting the analyzer to the LPG tank, regulating pressure and flow, purging the system, taking an oxygen reading, recording results, and disconnecting from the tank. Figures and labels are also provided to identify components of the analyzer.
2016 CRW - An inside look at Kiewit's Crane & Rigging Management System
2016 CRW - An inside look at Kiewit's Crane & Rigging Management SystemSpecialized Carriers & Rigging Association
Learn crane and rigging management systems from one of the top General Contractors in the U.S. known for its comprehensive training and focus on employee safety. This three-part session will provide insight into Kiewit’s essential management principles that you can implement in your company.
The topics include:
new operators: hiring, training and technology
risk assessment and mitigation for cranes on job sites
rigging personnel and qualifications
lift planning and incident reporting
Speaker: Bret Shields, Corporate Crane Compliance Manager, Kiewit Crane Services2
The document provides information about the criteria for developing a rescue plan for working at heights (WAH) activities, including working on temporary or permanent platforms over 6 meters, constructing or dismantling temporary platforms, or working at the edge of a location with a risk of fall. It also provides definitions for descent rescue, cross haul rescue, and stretcher rescue. The multiple choice questions test knowledge of permit to work (PTW) requirements, hot work classifications, gas testing responsibilities, and confined space entry procedures.
RCFA Success of Root Cause Failure Analysis
This document discusses how to make root cause failure analysis (RCFA) a successful business improvement strategy. It notes that while many companies adopt RCFA, they often abandon it when they do not see benefits. RCFA is more effective at finding systematic causes of problems and improving business systems rather than solving individual problems. The document outlines how RCFA works best when the learnings are used to improve broader business processes, not just fix single issues. It provides an example of how taking learnings from an RCFA and implementing them company-wide can prevent numerous future failures and significantly improve performance and profits over the long run.
What's hot (20)
6 71-0051 rev. 4 standard specification for pipeline construction (onshore)
6 71-0051 rev. 4 standard specification for pipeline construction (onshore)
Deepwater horizon accident_investigation_static_presentation
Deepwater horizon accident_investigation_static_presentation
252113184 method-statement-for-office-container-and-equipment-mobilization (1)
252113184 method-statement-for-office-container-and-equipment-mobilization (1)
Resume of jaison varkey QA/QC Inspector welding,coating
Resume of jaison varkey QA/QC Inspector welding,coating
8 lifting operations with mobile crane risk assessment templates
8 lifting operations with mobile crane risk assessment templates
2016 CRW - An inside look at Kiewit's Crane & Rigging Management System
2016 CRW - An inside look at Kiewit's Crane & Rigging Management System
Viewers also liked
Fabrication&erection sequence proposal
This document outlines a 16-stage fabrication and erection sequence for a tank storage terminal in Karimun, Indonesia. Stage 1 involves laying the annular plate and bottom plate foundations. Stages 2-4 continue bottom plate laying. Stage 5 completes bottom plate erection and begins the first shell course. Stages 6-8 erect the second shell course and add stairways. Stages 9-14 jack up layers and erect additional shell courses. Stage 15 completes shell laying. Stage 16 involves erecting the roof.
PQ Presentation(BADC) - Rev2
This document provides an overview of Bilad Al-Duha, an Iraqi mechanical contractor. It includes sections on the company history, organization chart, goals, scope of services, equipment, network, activities, project experiences and photos. Bilad Al-Duha has over 800 employees across Iraq and Dubai and provides construction services to the oil, gas and power industries, including pipeline installation, tank construction, and engineering services. The document highlights several past projects and Bilad Al-Duha's capabilities and equipment for mechanical construction activities.
QICL Large Storage Tank Site Erection Capabilities
The document discusses Quality International Fujairah's (QICL) capabilities in erecting large storage tanks. It mentions a contract between QICL and Rotary Engineering for the pre-fabrication and erection of storage tanks at Fujairah Oil Terminal in the UAE. The tanks range in diameter from 4 to 72 meters and will be used to store products like crude oil, fuel oil, gasoline, and diesel. QICL will provide pre-fabrication of 23 tanks weighing 10,500 metric tons and erection of 7 tanks weighing 3,885 metric tons.
Dismantling, Project, Supply, Pre-Fabrication and Construction of a 3000 m3 G...
This document outlines the steps to dismantle, construct pre-fabricate, and build a 3000 m3 gasoil tank including dismantling, constructing the tank base and floor, erecting the wall structure, adding the roof structure and steel plates, installing level pipes, painting, and completing the final tank.
Tank design - word
This document discusses different types of storage tanks used in refineries and chemical plants. It describes atmospheric storage tanks, which operate at approximately atmospheric pressure, including fixed-roof tanks, floating-roof tanks, and fixed-roof tanks with an internal floating roof. Low-temperature and low-pressure storage tanks are also discussed. Standards for storage tank design include API-650 for atmospheric tanks and API-620 for low-pressure tanks. Floating roof tanks are described as minimizing vapor losses by maintaining a small vapor space or eliminating it completely.
Introduction to Storage Tanks
This document provides an introduction and overview of different types of storage tanks. It discusses 8 main types of storage tanks: fixed-roof tanks, external floating roof tanks, internal floating roof tanks, domed external floating roof tanks, horizontal tanks, pressure tanks, variable vapor space tanks, and LNG storage tanks. Each tank type is designed for storing different types of liquids and gases and has distinct features such as floating roofs, fixed roofs, insulation, and sizes that can range from meters to over 100 meters in diameter. The document also discusses containment basins, which storage tanks are often placed inside of to contain spills.
Top 15 tips to prepare every job interviews
The document provides 14 tips for job interview success. The tips include conducting research on the employer and position, preparing responses to common interview questions, tailoring stories to the specific job, dressing professionally, arriving on time, making good impressions, maintaining positive body language, asking insightful questions, selling your qualifications throughout, focusing answers on contributions to the company, bringing examples of work, avoiding discussing salary until an offer is made, and thanking all interviewers. The overall message is that thorough preparation and demonstrating fit for the role and organization are key to interview success.
Top 16 ways to make money online forever
The document provides 16 ways to make money online, beginning with making money from YouTube videos. It recommends choosing popular niche topics and describes how to earn money from views via Google Adsense or YouTube partner networks. The second way discussed is affiliate marketing, explaining how affiliates are rewarded for promoting products. Top affiliate networks like Amazon, Rakuten, and Clickbank are recommended. Other methods discussed include making money from blogs on Blogger, using Clickbank to promote affiliate products, earning from shortened links on Adf.ly, freelancing on sites like Freelancer, creating websites using Wordpress or Blogger, and publishing ebooks on Amazon Kindle.
2015 Upload Campaigns Calendar - SlideShare
Each month, join us as we highlight and discuss hot topics ranging from the future of higher education to wearable technology, best productivity hacks and secrets to hiring top talent. Upload your SlideShares, and share your expertise with the world!
What to Upload to SlideShare
Not sure what to share on SlideShare?
SlideShares that inform, inspire and educate attract the most views. Beyond that, ideas for what you can upload are limitless. We’ve selected a few popular examples to get your creative juices flowing.
Getting Started With SlideShare
SlideShare is a global platform for sharing presentations, infographics, videos and documents. It has over 18 million pieces of professional content uploaded by experts like Eric Schmidt and Guy Kawasaki. The document provides tips for setting up an account on SlideShare, uploading content, optimizing it for searchability, and sharing it on social media to build an audience and reputation as a subject matter expert.
Viewers also liked (12)
QICL Large Storage Tank Site Erection Capabilities
QICL Large Storage Tank Site Erection Capabilities
Dismantling, Project, Supply, Pre-Fabrication and Construction of a 3000 m3 G...
Dismantling, Project, Supply, Pre-Fabrication and Construction of a 3000 m3 G...
Tank Erection Sequence
- 1. Tank Erection Sequence Tank Erection Sequence Page 1 of 15Exported on April 13, 2015 3:48:49 PM GST
- 2. Page 2 of 15Exported on April 13, 2015 3:48:49 PM GST
- 3. Page 3 of 15Exported on April 13, 2015 3:48:49 PM GST
- 4. Page 4 of 15Exported on April 13, 2015 3:48:49 PM GST
- 5. Page 5 of 15Exported on April 13, 2015 3:48:49 PM GST
- 6. Page 6 of 15Exported on April 13, 2015 3:48:49 PM GST
- 7. Page 7 of 15Exported on April 13, 2015 3:48:49 PM GST
- 8. Page 8 of 15Exported on April 13, 2015 3:48:49 PM GST
- 9. Page 9 of 15Exported on April 13, 2015 3:48:49 PM GST
- 10. Page 10 of 15Exported on April 13, 2015 3:48:49 PM GST
- 11. Page 11 of 15Exported on April 13, 2015 3:48:50 PM GST
- 12. Page 12 of 15Exported on April 13, 2015 3:48:50 PM GST
- 13. Page 13 of 15Exported on April 13, 2015 3:48:50 PM GST
- 14. Page 14 of 15Exported on April 13, 2015 3:48:50 PM GST
- 15. Page 15 of 15Exported on April 13, 2015 3:48:50 PM GST