Tammy Blunt Resume
•Download as DOCX, PDF•
0 likes•86 views
Tammy Blunt has over 6 years of experience in production planning and industrial engineering. She currently works as a Production Planner at Borg Warner where she manages procurement of raw materials from suppliers. Previously, she held internship roles at Parker Hannifin, Glen Raven, and Robert Bosch where she focused on process improvement, time studies, and cost savings projects. Tammy holds a B.S. in Industrial Engineering from Clemson University and is proficient in SAP, Microsoft Office, and technical writing. She has references available.
Report
Share
Report
Share
Recommended
Graham_Hoffman_Resume_2015
This document is a resume for Graham Hoffman summarizing his education and work experience. Hoffman received a Bachelor of Science in Industrial Engineering from California Polytechnic State University in 2015, with an emphasis in Manufacturing and Operations Systems. His relevant coursework includes topics like quality control, lean manufacturing, and statistics. For work experience, Hoffman has held positions as a Mechanical Test Engineer at Northrop Grumman and as a Process & Quality Engineer at Vinyl Technology. He also completed internships at Northrop Grumman working on mechanical engineering projects. Hoffman's senior project involved applying lean and six sigma concepts to process and quality engineering.
Resume_Venkatesh
Venkatesh Muthukrishnan is an industrial engineer with expertise in lean manufacturing, Six Sigma quality methods, process improvement, and automation. He has a master's degree in industrial engineering and certifications in Six Sigma Green Belt. He is seeking new opportunities to apply his skills in quality control, process redesign, and statistical analysis gained through academic and professional experience.
Resume 2016
Angela Hackenberg seeks to grow her career and contribute to company success. She has a BS in Construction Engineering from the University of Akron with a 3.2 GPA. Her experience includes overseeing quality control and materials testing as a Construction Inspection Coordinator at Kleinfelder, quality control oversight as a Quality Control Engineer at Lindsay Precast, and construction management and site inspection as a Northern Regional Inspector at CESO Inc. She has various safety, testing, and inspection certifications.
Stechschulte.Kaitlin revised
Kaitlin Stechschulte is seeking an engineering internship and has a strong educational background including a projected B.S. in Chemical Engineering from Ohio State University in 2018. She has relevant work experience at The J.M. Smucker Company as a Process Engineer where she implemented process improvements and led research projects. Kaitlin also has laboratory experience and skills in technical communication and software including MATLAB, AutoCAD, SolidWorks and JMP. She is active on campus as a mentor and volunteer with organizations supporting women in engineering.
DC Resume v2021
Divyang Choudhary has over 7 years of experience in industrial engineering, project management, and lean manufacturing. He is currently a Project Engineer at Phoenix Laser Solutions where he implements cost-saving initiatives, manages strategic planning, and conducts data analysis to streamline operations. Previously, he was a Project Lead at Rail Wheel Factory where he managed a team that optimized furnace fuel consumption, resulting in annual savings of $233K+. He holds a Master's degree in Industrial Engineering and a Bachelor's degree in Mechanical Engineering, and has received certifications in Six Sigma and Agile project management.
Saif cv(1)
Saifur Rahman has over 3 years of experience working as a site engineer, mechanical engineer, and supervisor. He holds a B.Tech in Mechanical Engineering and is proficient in AutoCAD, CAESER II, PDMS, and MS Office applications. Currently, he works as a site engineer for Techno Global Services on behalf of Gail Gas Limited, where he is responsible for project execution, compliance, coordination, and resolving issues. He aims to further develop his skills and help organizations grow.
Andy Kuss - Resume
Andrew Kuss has over 10 years of experience in energy efficiency program management and quality control. He currently works as the Field Manager for Ecova, managing the field operations and quality control processes for the AEP Ohio In-home Energy Program. Previously he has held roles as an Energy Advisor managing whole-home energy retrofit projects in Oregon and as the Quality Control Coordinator for Conservation Services Group, ensuring proper installation of energy efficiency upgrades. He has a Bachelor's degree in Geology from Miami University and certifications in building performance and energy management.
Chris resume
Christian Fields has over 10 years of experience in facilities management, engineering, and project management. He currently works as a Lead Engineer at Amazon where he has implemented various programs and proposals that have saved the company over $2 million collectively. Previously he worked at Coresite as a Facilities Technician and Maintenance Coordinator where he oversaw the implementation of a new data center. He also has experience as a Project Manager for COMNAVSURFLANT where he reduced service costs. He holds several certifications in facilities management, quality assurance, and lean six sigma.
Recommended
Graham_Hoffman_Resume_2015
This document is a resume for Graham Hoffman summarizing his education and work experience. Hoffman received a Bachelor of Science in Industrial Engineering from California Polytechnic State University in 2015, with an emphasis in Manufacturing and Operations Systems. His relevant coursework includes topics like quality control, lean manufacturing, and statistics. For work experience, Hoffman has held positions as a Mechanical Test Engineer at Northrop Grumman and as a Process & Quality Engineer at Vinyl Technology. He also completed internships at Northrop Grumman working on mechanical engineering projects. Hoffman's senior project involved applying lean and six sigma concepts to process and quality engineering.
Resume_Venkatesh
Venkatesh Muthukrishnan is an industrial engineer with expertise in lean manufacturing, Six Sigma quality methods, process improvement, and automation. He has a master's degree in industrial engineering and certifications in Six Sigma Green Belt. He is seeking new opportunities to apply his skills in quality control, process redesign, and statistical analysis gained through academic and professional experience.
Resume 2016
Angela Hackenberg seeks to grow her career and contribute to company success. She has a BS in Construction Engineering from the University of Akron with a 3.2 GPA. Her experience includes overseeing quality control and materials testing as a Construction Inspection Coordinator at Kleinfelder, quality control oversight as a Quality Control Engineer at Lindsay Precast, and construction management and site inspection as a Northern Regional Inspector at CESO Inc. She has various safety, testing, and inspection certifications.
Stechschulte.Kaitlin revised
Kaitlin Stechschulte is seeking an engineering internship and has a strong educational background including a projected B.S. in Chemical Engineering from Ohio State University in 2018. She has relevant work experience at The J.M. Smucker Company as a Process Engineer where she implemented process improvements and led research projects. Kaitlin also has laboratory experience and skills in technical communication and software including MATLAB, AutoCAD, SolidWorks and JMP. She is active on campus as a mentor and volunteer with organizations supporting women in engineering.
DC Resume v2021
Divyang Choudhary has over 7 years of experience in industrial engineering, project management, and lean manufacturing. He is currently a Project Engineer at Phoenix Laser Solutions where he implements cost-saving initiatives, manages strategic planning, and conducts data analysis to streamline operations. Previously, he was a Project Lead at Rail Wheel Factory where he managed a team that optimized furnace fuel consumption, resulting in annual savings of $233K+. He holds a Master's degree in Industrial Engineering and a Bachelor's degree in Mechanical Engineering, and has received certifications in Six Sigma and Agile project management.
Saif cv(1)
Saifur Rahman has over 3 years of experience working as a site engineer, mechanical engineer, and supervisor. He holds a B.Tech in Mechanical Engineering and is proficient in AutoCAD, CAESER II, PDMS, and MS Office applications. Currently, he works as a site engineer for Techno Global Services on behalf of Gail Gas Limited, where he is responsible for project execution, compliance, coordination, and resolving issues. He aims to further develop his skills and help organizations grow.
Andy Kuss - Resume
Andrew Kuss has over 10 years of experience in energy efficiency program management and quality control. He currently works as the Field Manager for Ecova, managing the field operations and quality control processes for the AEP Ohio In-home Energy Program. Previously he has held roles as an Energy Advisor managing whole-home energy retrofit projects in Oregon and as the Quality Control Coordinator for Conservation Services Group, ensuring proper installation of energy efficiency upgrades. He has a Bachelor's degree in Geology from Miami University and certifications in building performance and energy management.
Chris resume
Christian Fields has over 10 years of experience in facilities management, engineering, and project management. He currently works as a Lead Engineer at Amazon where he has implemented various programs and proposals that have saved the company over $2 million collectively. Previously he worked at Coresite as a Facilities Technician and Maintenance Coordinator where he oversaw the implementation of a new data center. He also has experience as a Project Manager for COMNAVSURFLANT where he reduced service costs. He holds several certifications in facilities management, quality assurance, and lean six sigma.
Sean_Hickey
Sean Hicky is seeking a project management position and has over 5 years of experience in design engineering and project management. He has a Master's in Mechanical Engineering from Villanova University and a Bachelor's from Penn State. Currently, he works as a Design/Analysis Engineer at Boeing where he leads projects, collaborates cross-functionally, and ensures new part designs meet standards. Previously, he was a Manufacturing Engineer also at Boeing where he improved production processes.
bob-manuel--anthony-karibi-resume-1st-draft
Tenacious Cost Control Engineer with over 15 years experience providing financial analysis and cost support on projects. Skilled at cost management, forecasting, and reporting capital costs. Manages allocation of resources, processes data, and trains staff for multiple concurrent projects. Previously coordinated data processing and developed standard procedures. Currently manages cost control for Dangote Fertilizer Project.
2017 Resume'
Patricia Graham has over 17 years of experience in quality engineering and inspection supervision roles in the manufacturing industry. She is a Six Sigma Green Belt with a background in lean manufacturing and continuous improvement. Her experience includes project management, quality auditing, process analysis, and developing training programs to reduce scrap rates and address regulatory compliance. She currently works as a Quality Engineer and Inspection Supervisor at Eaton-Hutchinson Corp. where she has led initiatives to improve processes, reduce costs, and ensure quality standards.
Anand B S - CV
Ananda B. S. has over 5 years of experience in mechanical engineering, project management, and construction operations. He is currently a Senior Mechanical Engineer with M N Dastur & Co. (P) Ltd in Visakhapatnam, India, where he oversees hydraulic systems and grease lubrication systems. He has experience managing resources, coordinating teams, and ensuring safety and quality compliance on various power and steel plant construction projects. He holds a Bachelor's degree in Mechanical Engineering and is certified in non-destructive testing methods.
HarrisonP_Resume
Harrison Pressman is seeking a position in industrial engineering. He has a Bachelor of Science in Industrial Engineering from Penn State University. His relevant work experience includes process engineering at Ultra Electronics where he designed parts and fixtures using CAD software and managed purchase orders. He also has experience delivering food and conducting landscaping work. His technical skills include experience with CAD, simulation, and data analysis software.
Kirk Doerr CB&I Resume (Updated 7/25/2017)
Kirk E. Doerr has over 10 years of experience in civil engineering and construction. He received a BS in Civil Engineering from the University of Kansas and is a licensed Engineer in Training in Kansas. His experience includes working as a civil field engineer, concrete coordinator, and project controls specialist on large industrial construction projects for CB&I. He has expertise in areas such as engineering inspections, concrete planning and coordination, document management, and resolving field issues.
SamarKantiBarua
This document is a resume for Samar Kanti Barua, who has over 11 years of experience in the energy and aerospace industries specializing in product design, development, and analysis. He is currently an Assistant Lead Engineer at Vestas Technology R&D leading efforts in code development for wind turbine load modeling and analysis. Prior to this, he worked at GE-ITC as a Lead Engineer performing structural design calculations and FE analysis of major gas turbine components.
Resume
This document is a resume for Gao Yuzhe that outlines his education, research projects, engineering experience, and skills. Gao Yuzhe received a Master's degree in Mechanical Engineering from Clemson University in 2016 and a Bachelor's degree in Mechanical Engineering from Beijing Institute of Technology in 2014. His research projects include wind turbine gearbox design, flywheel optimization, and hydraulic system design. He has engineering experience with vehicle production and as a project manager assistant for an aerospace company. Gao Yuzhe has expertise in CAD, FEA, optimization, and mechanical skills like machining and welding.
Russell Weeks Resume 2016
Russell Weeks has a Bachelor of Science in Mechanical Engineering from Tufts University and work experience in manufacturing and quality engineering. He has interned at Corvia Medical where he updated manufacturing procedures, redesigned test fixtures, and manufactured medical devices. Weeks also interned multiple summers at GKN Aerospace where he conducted process studies, analyzed inspection data, and ensured compliance with quality standards. In addition to his engineering skills, Weeks has experience teaching swimming and supervising children through various summer jobs.
Choudhary Divyang Resume
Divyang Choudhary has extensive experience in industrial engineering, manufacturing, and quality improvement. He holds an M.S. in Industrial Engineering from the University of Texas at Arlington and a B.E. in Mechanical Engineering. As a project leader in India, he optimized a furnace's fuel consumption, increasing productivity by 5% and saving over $233k annually. As an intern, he gained experience in steel making, heat treatment, and manufacturing railway axles. His academic projects focused on quality improvement, forecasting, simulation, and time study.
Boiler Supporting structure-Steel detailing
Hi-Tech was contracted to provide shop drawings for a boiler supporting structure in the UAE. They modeled the structure in Tekla after receiving the initial Staad model from the client's design firm. This required adjusting member locations and dealing with revisions as design progressed. The 55m tall tower structure with a boiler mass at the top presented stability challenges under earthquake loads. Hi-Tech delivered general arrangement, assembly, and part drawings over 5 months to help expedite installation. They employed quality processes including self-checks, peer reviews, and audits to deliver the project outputs on time.
Colby A. Murphy's Resume
Colby A. Murphy is seeking a full-time position in mechanical engineering utilizing work and design experience. He has a Bachelor of Science in Mechanical Engineering from the University of South Carolina and has held internships at CB&I, Carlisle Associates, and Dennis Corporation. His experience includes piping design, HVAC and mechanical systems CAD, and compliance work.
cv avik
Avik Sen is seeking new challenging assignments as an Assistant Engineer with over 3 years of experience in construction. He currently works for McNally Bharat Engineering Company Limited, where he has executed and monitored civil field works, prepared client invoices and measurement sheets, and generated progress reports. Some of his responsibilities have included coordinating with site managers, monitoring project progress and cash flow, and understanding contracts to work in ERP and MS Project systems. He holds a Diploma in Civil Engineering and has worked on projects like the civil, structural and architectural works for a 250 MW thermal power plant worth Rs. 243 crores in Bihar.
Choudhary Divyang resume
The document is a resume for Divyang Choudhary that summarizes his professional and educational experience. It includes his contact information, technical skills, and details of his M.S. in Industrial Engineering and B.E. in Mechanical Engineering. It also outlines his professional experience leading projects to improve efficiency at a production unit in India and his internship studying manufacturing processes. Finally, it lists academic projects completed at the University of Texas at Arlington applying quality improvement techniques, simulation, and time study methods.
Resume_Nilanjan_Kundu
I am a graduate with a Bachelor’s degree in Mechanical Engineering at the University at Buffalo. I am actively seeking full time job opportunity in the field of Mechanical Engineering.
My interest areas are: Design, Product Development and Manufacturing.
JordanWeibelsResume
Jordan Weibel has over 5 years of experience managing last mile fiber optic network design, construction, and quality assurance for Google Fiber. He has led engineering change orders to reduce costs and improve design quality. Additionally, he has experience performing field surveys, quality inspections, and ensuring fiber installations meet design specifications. Weibel holds a Bachelor of Science degree in Environmental Science from the University of Missouri - Kansas City, where he was also president and MVP of the men's rugby team.
JoshuaWernerResume
Joshua A. Werner is seeking employment as a Mechanical Engineer. He is expected to graduate in 2017 from Penn State Behrend with a Bachelor's degree in Mechanical Engineering and a 3.75 GPA. He has internship experience at Conair and Kennametal where he performed testing, modeling, and project work. His academic projects include developing an automated quality control system using eddy current technology, designing components for a wind turbine, and managing a manufacturing project. His technical skills include materials testing, vibrations analysis, FEA, modeling software, programming, and project planning.
findley-steve BME professional
Steve Findley has over 18 years of experience as a mechanical engineer, including experience in project management, material analysis, value engineering, production engineering, product testing, manufacturing compliance, drafting and design. He has a B.S. in Mechanical Engineering and experience using AutoCAD, Inventor, Microsoft Office, and other engineering tools. Most recently he worked at Champion Bus as a mechanical engineer and project manager, where he helped reduce production time and costs for buses while improving quality and profitability.
Chem Cad And ConcepSys Integration - AiChE Spring 09
The document discusses using ConcepSys software to aid in the preliminary design of biodiesel plants. It provides an example of importing a biodiesel process simulation from ChemCAD into ConcepSys to size equipment, layout piping, and generate design documents and cost estimates. The presentation highlights how ConcepSys streamlines front-end engineering tasks and links critical design parameters to costs. It also describes incorporating the software into a senior design course to teach students project development workflow.
Ahmed Rezk
Ahmed Rezk Younis is seeking a challenging position as a civil engineer where he can use his planning, designing, and overseeing skills. He has a B.Sc. in civil engineering from Cairo University and is PMP certified. Currently he works as a civil site engineer on Egyptian National Railways modernization projects. Previous experience includes work as a civil site engineer on high-rise buildings and military engineering projects. Key skills include AutoCAD, structural analysis software, project management, and fluency in English and Arabic.
Wesley Yan Resume
Wesley T. Yan has over 5 years of experience in supply chain management, production supervision, and operations excellence. He received a B.S. in Chemical and Biomolecular Engineering from the University of Maryland. Through various roles at Newell Rubbermaid and Irwin Tools, he has developed performance metrics, streamlined processes, implemented continuous improvement initiatives, and negotiated transportation costs. His skills include people management, transaction systems, and cross-functional teamwork.
Technology project manager
Rena Cummings has over 20 years of experience in project management and engineering. She has an MS in Project Management and Technology Management and has achieved significant cost savings on multiple projects through Lean and Six Sigma applications. She is proficient in Agile methodologies and has experience managing global teams and cloud-based technology projects.
More Related Content
What's hot
Sean_Hickey
Sean Hicky is seeking a project management position and has over 5 years of experience in design engineering and project management. He has a Master's in Mechanical Engineering from Villanova University and a Bachelor's from Penn State. Currently, he works as a Design/Analysis Engineer at Boeing where he leads projects, collaborates cross-functionally, and ensures new part designs meet standards. Previously, he was a Manufacturing Engineer also at Boeing where he improved production processes.
bob-manuel--anthony-karibi-resume-1st-draft
Tenacious Cost Control Engineer with over 15 years experience providing financial analysis and cost support on projects. Skilled at cost management, forecasting, and reporting capital costs. Manages allocation of resources, processes data, and trains staff for multiple concurrent projects. Previously coordinated data processing and developed standard procedures. Currently manages cost control for Dangote Fertilizer Project.
2017 Resume'
Patricia Graham has over 17 years of experience in quality engineering and inspection supervision roles in the manufacturing industry. She is a Six Sigma Green Belt with a background in lean manufacturing and continuous improvement. Her experience includes project management, quality auditing, process analysis, and developing training programs to reduce scrap rates and address regulatory compliance. She currently works as a Quality Engineer and Inspection Supervisor at Eaton-Hutchinson Corp. where she has led initiatives to improve processes, reduce costs, and ensure quality standards.
Anand B S - CV
Ananda B. S. has over 5 years of experience in mechanical engineering, project management, and construction operations. He is currently a Senior Mechanical Engineer with M N Dastur & Co. (P) Ltd in Visakhapatnam, India, where he oversees hydraulic systems and grease lubrication systems. He has experience managing resources, coordinating teams, and ensuring safety and quality compliance on various power and steel plant construction projects. He holds a Bachelor's degree in Mechanical Engineering and is certified in non-destructive testing methods.
HarrisonP_Resume
Harrison Pressman is seeking a position in industrial engineering. He has a Bachelor of Science in Industrial Engineering from Penn State University. His relevant work experience includes process engineering at Ultra Electronics where he designed parts and fixtures using CAD software and managed purchase orders. He also has experience delivering food and conducting landscaping work. His technical skills include experience with CAD, simulation, and data analysis software.
Kirk Doerr CB&I Resume (Updated 7/25/2017)
Kirk E. Doerr has over 10 years of experience in civil engineering and construction. He received a BS in Civil Engineering from the University of Kansas and is a licensed Engineer in Training in Kansas. His experience includes working as a civil field engineer, concrete coordinator, and project controls specialist on large industrial construction projects for CB&I. He has expertise in areas such as engineering inspections, concrete planning and coordination, document management, and resolving field issues.
SamarKantiBarua
This document is a resume for Samar Kanti Barua, who has over 11 years of experience in the energy and aerospace industries specializing in product design, development, and analysis. He is currently an Assistant Lead Engineer at Vestas Technology R&D leading efforts in code development for wind turbine load modeling and analysis. Prior to this, he worked at GE-ITC as a Lead Engineer performing structural design calculations and FE analysis of major gas turbine components.
Resume
This document is a resume for Gao Yuzhe that outlines his education, research projects, engineering experience, and skills. Gao Yuzhe received a Master's degree in Mechanical Engineering from Clemson University in 2016 and a Bachelor's degree in Mechanical Engineering from Beijing Institute of Technology in 2014. His research projects include wind turbine gearbox design, flywheel optimization, and hydraulic system design. He has engineering experience with vehicle production and as a project manager assistant for an aerospace company. Gao Yuzhe has expertise in CAD, FEA, optimization, and mechanical skills like machining and welding.
Russell Weeks Resume 2016
Russell Weeks has a Bachelor of Science in Mechanical Engineering from Tufts University and work experience in manufacturing and quality engineering. He has interned at Corvia Medical where he updated manufacturing procedures, redesigned test fixtures, and manufactured medical devices. Weeks also interned multiple summers at GKN Aerospace where he conducted process studies, analyzed inspection data, and ensured compliance with quality standards. In addition to his engineering skills, Weeks has experience teaching swimming and supervising children through various summer jobs.
Choudhary Divyang Resume
Divyang Choudhary has extensive experience in industrial engineering, manufacturing, and quality improvement. He holds an M.S. in Industrial Engineering from the University of Texas at Arlington and a B.E. in Mechanical Engineering. As a project leader in India, he optimized a furnace's fuel consumption, increasing productivity by 5% and saving over $233k annually. As an intern, he gained experience in steel making, heat treatment, and manufacturing railway axles. His academic projects focused on quality improvement, forecasting, simulation, and time study.
Boiler Supporting structure-Steel detailing
Hi-Tech was contracted to provide shop drawings for a boiler supporting structure in the UAE. They modeled the structure in Tekla after receiving the initial Staad model from the client's design firm. This required adjusting member locations and dealing with revisions as design progressed. The 55m tall tower structure with a boiler mass at the top presented stability challenges under earthquake loads. Hi-Tech delivered general arrangement, assembly, and part drawings over 5 months to help expedite installation. They employed quality processes including self-checks, peer reviews, and audits to deliver the project outputs on time.
Colby A. Murphy's Resume
Colby A. Murphy is seeking a full-time position in mechanical engineering utilizing work and design experience. He has a Bachelor of Science in Mechanical Engineering from the University of South Carolina and has held internships at CB&I, Carlisle Associates, and Dennis Corporation. His experience includes piping design, HVAC and mechanical systems CAD, and compliance work.
cv avik
Avik Sen is seeking new challenging assignments as an Assistant Engineer with over 3 years of experience in construction. He currently works for McNally Bharat Engineering Company Limited, where he has executed and monitored civil field works, prepared client invoices and measurement sheets, and generated progress reports. Some of his responsibilities have included coordinating with site managers, monitoring project progress and cash flow, and understanding contracts to work in ERP and MS Project systems. He holds a Diploma in Civil Engineering and has worked on projects like the civil, structural and architectural works for a 250 MW thermal power plant worth Rs. 243 crores in Bihar.
Choudhary Divyang resume
The document is a resume for Divyang Choudhary that summarizes his professional and educational experience. It includes his contact information, technical skills, and details of his M.S. in Industrial Engineering and B.E. in Mechanical Engineering. It also outlines his professional experience leading projects to improve efficiency at a production unit in India and his internship studying manufacturing processes. Finally, it lists academic projects completed at the University of Texas at Arlington applying quality improvement techniques, simulation, and time study methods.
Resume_Nilanjan_Kundu
I am a graduate with a Bachelor’s degree in Mechanical Engineering at the University at Buffalo. I am actively seeking full time job opportunity in the field of Mechanical Engineering.
My interest areas are: Design, Product Development and Manufacturing.
JordanWeibelsResume
Jordan Weibel has over 5 years of experience managing last mile fiber optic network design, construction, and quality assurance for Google Fiber. He has led engineering change orders to reduce costs and improve design quality. Additionally, he has experience performing field surveys, quality inspections, and ensuring fiber installations meet design specifications. Weibel holds a Bachelor of Science degree in Environmental Science from the University of Missouri - Kansas City, where he was also president and MVP of the men's rugby team.
JoshuaWernerResume
Joshua A. Werner is seeking employment as a Mechanical Engineer. He is expected to graduate in 2017 from Penn State Behrend with a Bachelor's degree in Mechanical Engineering and a 3.75 GPA. He has internship experience at Conair and Kennametal where he performed testing, modeling, and project work. His academic projects include developing an automated quality control system using eddy current technology, designing components for a wind turbine, and managing a manufacturing project. His technical skills include materials testing, vibrations analysis, FEA, modeling software, programming, and project planning.
findley-steve BME professional
Steve Findley has over 18 years of experience as a mechanical engineer, including experience in project management, material analysis, value engineering, production engineering, product testing, manufacturing compliance, drafting and design. He has a B.S. in Mechanical Engineering and experience using AutoCAD, Inventor, Microsoft Office, and other engineering tools. Most recently he worked at Champion Bus as a mechanical engineer and project manager, where he helped reduce production time and costs for buses while improving quality and profitability.
Chem Cad And ConcepSys Integration - AiChE Spring 09
The document discusses using ConcepSys software to aid in the preliminary design of biodiesel plants. It provides an example of importing a biodiesel process simulation from ChemCAD into ConcepSys to size equipment, layout piping, and generate design documents and cost estimates. The presentation highlights how ConcepSys streamlines front-end engineering tasks and links critical design parameters to costs. It also describes incorporating the software into a senior design course to teach students project development workflow.
Ahmed Rezk
Ahmed Rezk Younis is seeking a challenging position as a civil engineer where he can use his planning, designing, and overseeing skills. He has a B.Sc. in civil engineering from Cairo University and is PMP certified. Currently he works as a civil site engineer on Egyptian National Railways modernization projects. Previous experience includes work as a civil site engineer on high-rise buildings and military engineering projects. Key skills include AutoCAD, structural analysis software, project management, and fluency in English and Arabic.
What's hot (20)
Chem Cad And ConcepSys Integration - AiChE Spring 09
Chem Cad And ConcepSys Integration - AiChE Spring 09
Similar to Tammy Blunt Resume
Wesley Yan Resume
Wesley T. Yan has over 5 years of experience in supply chain management, production supervision, and operations excellence. He received a B.S. in Chemical and Biomolecular Engineering from the University of Maryland. Through various roles at Newell Rubbermaid and Irwin Tools, he has developed performance metrics, streamlined processes, implemented continuous improvement initiatives, and negotiated transportation costs. His skills include people management, transaction systems, and cross-functional teamwork.
Technology project manager
Rena Cummings has over 20 years of experience in project management and engineering. She has an MS in Project Management and Technology Management and has achieved significant cost savings on multiple projects through Lean and Six Sigma applications. She is proficient in Agile methodologies and has experience managing global teams and cloud-based technology projects.
Business analysis project management
I have 15 years of liaison / Project Management experience between engineering and management. I analysis the clients’ needs and make sure they are meet by implement a value stream delivery though out the project life cycle.
Example I took on a project at Daimler North America in New Product Design and was able to complete my project schedule in 6 months ahead of time, saving over half million dollars in labor cost. At JTS as Business Process Analysis, I was able to improved their operation efficiency by 25 percent with a predicted cost saving of $75,000. Seattle Give Camp I co-lead 28 projects with over 200 students and professionals to create websites for nonprofit organizations. At Siemens Westinghouse, as Project lead, I lead team of 10: engineers , craft workers, and suppliers by implementing changes management resulting in 47% reduction of rework. Achieved cost savings of $800,000 using techniques such as Lean and Kaizen, continuous improvements.
Joel_Warren_Resume_REVE
Joel P. Warren graduated from the University of North Carolina at Charlotte with a Bachelor of Science in Mechanical Engineering and a 3.3 GPA. He has experience as a Project Engineer at Triest Ag Group where he spearheaded construction projects, redesigned equipment, analyzed budgets, and resolved engineering issues. Warren also has experience as a machinist, engine assembler, and fabricator at Warren Engines, Inc. where he conducted research and testing to optimize high-performance racing engines. Warren has proficiency with various engineering software and tools including AutoCAD, SolidWorks, Abaqus, Microsoft Office, and LabVIEW.
Resume
Andrew Aronson is seeking a full-time mechanical engineering position and has relevant experience through education and employment. He has a Bachelor of Science in Mechanical Engineering Technology expected from Rochester Institute of Technology in May 2017. Through previous jobs, he has gained skills in areas like quality engineering, CAD, project management, and automotive technician work. His objective is to obtain a mechanical engineering role where he can apply his mechanical and technical abilities.
Darby_Spiegel Resume
Darby Marie Spiegel is seeking a full-time position that allows for growth at an innovative company. She received a Bachelor's degree in Mechanical Engineering from Michigan State University and has internship experience at Ford Motor Company, International Paper, and KDK Inc. Her experience includes developing macros to streamline data collection processes, cost savings projects, and assisting engineers with testing. She has skills in 6-Sigma, CAD software, data analysis, and project management.
Ruban-Profile updated
This document provides a profile summary for R.Rubanraja, including his current employment as a Production Planning Engineer at M/s PRD Rigs India since 2011. It details his responsibilities like project planning and scheduling, production monitoring, and coordinating departments. Previous experience includes working as a Production Engineer at Ojus Power Technologies from 2010-2011. Educational qualifications include a B.E. in Mechanical Engineering and relevant skills in AutoCAD and Pro-E. Achievements include reducing platform process time and introducing sub-assembly and point-of-use systems.
Sanchit - Resume
The document provides a summary of Sanchit Bhadoria's work experience and education. He has over 5 years of experience in the automotive and locomotive industries, where he has helped streamline processes, implement lean manufacturing techniques, and support new product development. Currently, he works as an Industrial/Manufacturing Engineer at Siemens Industry, where his responsibilities include creating standard work instructions, improving processes, and resolving manufacturing issues. He holds a Master's degree in Mechanical Engineering from California State University, Long Beach.
GB_LinkedinResumeFY15
Grant Bessac has over 4 years of experience as a mechanical engineer, including positions at ESCO Corporation and Nike Golf Ball R&D. He has skills in CAD software like Creo and Inventor as well as analysis tools like FEA and MATLAB. At ESCO, he designed digging equipment and led design reviews. At Nike, he developed and analyzed tests of golf ball prototypes. Bessac has a Bachelor's degree in Mechanical Engineering from Texas Christian University and experience with projects there and internships at Corning Cable Systems and Weatherford International.
Resume_Ling_Nie
This document is a resume for L. William Nie seeking a position as a Mechanical Engineer. It summarizes his work experience including positions at Sumitomo Electric Wiring Systems as a Design Engineer, RB-Tech Inc. as a Design Engineer, Perfecular Inc. as a Mechanical Designer, and internships in China. It also lists his education as an MS in Mechanical Engineering from USC and BS from Guang Dong University of Technology, China. Relevant skills include CAD, FEA, injection molding design, and languages of English and Mandarin Chinese.
Resume_Buenrostro
Joana Erika Perez has over 8 years of experience in industrial engineering and process improvement roles with the US Postal Service. She has a proven track record of successfully leading projects using Lean Six Sigma methodologies to reduce costs and improve processes. Some of her accomplishments include reducing missent mail by 25% and cutting mail processing cycle times by over 40%. She holds a master's degree in engineering management and multiple Lean Six Sigma certifications.
JameelFareedAbdulrazzaqnewresume(1)
Jameel Fareed Abdulrazzaq has a Bachelor of Science in Mechanical Engineering from Colorado State University. He has over 3 years of experience as a Mechanical Engineer working on projects including preventative maintenance and total productive maintenance. His skills include engineering design, prototyping, machining, and computer-aided design programs such as SolidWorks.
Update Resume 12-4
Trevor J. Sanders is seeking a project engineer position and has a M.S. in Nanoengineering from North Carolina A&T State University. As a project engineer at P3 North America, he managed interfaces between stakeholders to ensure understanding of requirements. He also supervised specification documents and oversaw solution architecture. Sanders has work experience in field engineering, undergraduate research, and food delivery. He is involved in professional organizations such as ASME, Toastmasters, and SAE.
Amy_Luxemberg_Resume
Amy Luxemberg is a senior at Virginia Tech studying industrial and systems engineering with a 3.27 GPA. She has internship experience at Klockner Pentaplast where she designed safety mechanisms, analyzed data, and streamlined processes. Through coursework projects, she used linear programming to optimize food aid budgets and redesigned a logistics network, saving over $191,000 annually. Her leadership activities include Formula SAE, professional engineering sororities, and intramurals. She earned Six Sigma Green Belt certification and academic honors including Dean's List and scholarships.
DiAndre Nixon Resume
The document is a resume for DiAndre Nixon that outlines his education, technical skills, projects, work experience and leadership experience. It shows that he has an MBA and BS in Mechanical Engineering from URI with relevant coursework and projects in areas such as mechanics, thermodynamics, fluid mechanics, heat transfer and finite element analysis. He has internship experience in project management and MEP roles at Skanska and conducted a Six Sigma project to improve processes at GTECH.
PeterBurkeResume.docx (1)
This document is a resume for Peter Burke, who is pursuing a career in mechanical engineering. He graduated in May 2016 from the University of North Carolina at Charlotte with a Bachelor of Science in Mechanical Engineering, concentrating in motorsports. Relevant coursework and projects included designing a modular midget car chassis and a forklift robot. He has experience using various engineering software programs and has held leadership roles in the Charlotte Motorists Club. Past work includes teaching art and performing field technician work testing power plant systems.
Copy of resume veera (2)
T. Veera Pratap Reddy is seeking a senior level position in production planning and control with 4 years of experience in production operations, quality management, process enhancement, and resource management. He has experience managing manpower, materials, and machinery. His experience includes centrifugal casting of pre-stressed concrete, bar wrapped steel cylinder, and mild steel pipes as well as laying and jointing DI and MS pipes. He has a Bachelor's degree in Mechanical Engineering.
resume-niheer
Niheer Shah is an industrial engineer at NC State University who has a Lean Six Sigma Green Belt certification. He has experience improving manufacturing processes through tools like value stream mapping and lead time reduction analysis. For one project, he reduced a rubber manufacturer's lead time from 33 to 15 days by increasing value-added time. Shah has skills in process improvement, lean manufacturing, quality control, and engineering software. He holds an MS in industrial engineering from NC State and a BTech in mechanical engineering.
Ermias e lemma resume 5 17-15
Ermias E. Lemma is seeking a mechanical engineering position. He has a Bachelor's degree in Mechanical Engineering from the University of Kentucky. During his studies, he completed four engineering internships in manufacturing, HVAC design, and research. His experience includes mechanical design, manufacturing engineering, HVAC design using various software programs. He also has leadership experience through involvement with student organizations like NSBE where he held various officer positions planning programs and events.
Manish shakya
This document is a resume for Manish Kumar Shakya. It summarizes his professional experience including roles as a student assistant, technical assistant, graduate engineer trainee, and project trainee. It also lists his education and skills including a Master's degree from Wayne State University and a Bachelor's degree from SJC Institute of Technology. His technical skills include Six Sigma Green Belt certification, lean manufacturing, and automation. He has experience in project management, inventory control, and quality improvement initiatives.
Similar to Tammy Blunt Resume (20)
Tammy Blunt Resume
- 1. Tammy Blunt 343 Shadow Creek Lane Anderson,SC 29621 (864) 634-1540 TammyBlunt315@gmail.com Experience Borg Warner / Production Planner December 2013 - PRESENT, Seneca, SC ● Managed daily procurement of 300+ raw materials from 25+ suppliers. ● Developed level scheduling process for subassembly manufacturing areas. ● Mentored 3 co-op students. ● Worked with 3rd party logistics company to drive inbound freight optimization. ● Led Production Planning Module for SAP conversion project. Parker Hannifin-Hydraulics / Industrial Engineering Intern May 2012 - August 2012, Otsego, MI ● Created CAD drawings for press fixtures on new assembly line. ● Coordinated Lean training on Overall Equipment Effectiveness. ● Championed Kaizen event in high velocity manufacturing cell. ● Established standards formaintaining raw material cleanliness. ● Completed construction of equipment for new assembly line. Glen Raven / Process Engineering Intern August 2011 - May 2012, Anderson, SC ● Conducted time studies for various bottleneck processes. ● Compiled plant wide report for cost per operation. ● Collaborated in improvement projects for bottleneck processes. Robert Bosch LLC / Customer Logistics Co-op May 2010 - July 2011, Charleston, SC ● Generated daily reports for PFEP used by planners. ● Initiated cost savings project yielding $30,000 cost savings. ● Improved aftermarket customer rating by closing gap in backlog orders. ● Advanced process for planning adjustable use raw materials. ㅡ Education Clemson University / B.S. Industrial Engineering August 2008 - May 2013 ● 3.3 GPA ● Capstone Design Project for Milliken and Company ㅡ
- 2. Skills & Abilities ㅡ References Experienced in SAP Proficient in Microsoft Suite Technical Writing Articulate and professional speaking abilities Strong problem solving and analytical skills Lisa McClain Production Control Supervisor, Exedy America (865) 804-2814 Katrina Hubbard Blue Ridge Orthopedics (864) 918-1257 Katie Bailey Stewardship Director, NewSpring Church (864) 642-7821