Synwood is the synthetic wood which is made by foaming of PVC by using ultra high end technology into different forms for various applications. It is 100% recyclable. • Synwood Decking – best suitable for decking at swimming pools, metro station or any other outdoor decking. • Synwood Cladding – A product that redefines your exterior appearance of your living space. • Synwood Construction Bars – made to be used for window frames, door frames, pool decks and garden benches.

1. Head Office :
A-601 / 607, Mangal Aarambh, Kora Kendra,
Borivali ( w ),Mumbai - 400092.
Tel : +91 22 6725 9601 / 05, +91 22 2833 8122.
Fax : +91 22 6725 9600. Email : sales@pnpind.com,
www.pnpind.com, www.synwood.in
Branch Office :
New Delhi : +91 97 1111 4794 Surat : +91 92 7690 9040
Kochi : +91 92 4947 9817 Bangalore : +91 98 4545 1036
Hyderabad : +91 92 4620 1036 Kolkata : + 91 92 30655308
Chennai : +91 92 8213 4421 Kanpur : +91 92 3550 5442
Authorized Dealer
PNP Polytex Pvt. Ltd.

3. Synwood wall Cladding is a synthetic material which is
more durable, less maintenance and is available in
natural wood texture. We offer variety of textures and
colors which will increase the aesthetic looks of your
property. Synwood cladding can be used for indoor as
well as outdoor application. Synwood cladding are the
best suitable for outdoor fencing, gates, wall pipe
covering, duct area covering, terrace sitting and
flooring, outer building wall designs.
WALL APPLICATIONS -
FLOOR DECORATION - FENCING -
GARDEN LANDSCAPING -
PERGOLAS - BOUNDARY WALLS.
APPLICATIONS
COLOURS
HD3HA3 HB3 HC3

4. 40mm X 80mm
50mm X 100mm
25mm X 50mm
25mm X 35mm
32
32
32mm X 32mm
14mm X 37mm
14mm X 34mm
34
1414
37
35mm X 60mm
60
80
11 11 11
11
11
11
100
13 10 10
12
12
13
35
50
25
25255040
Baton Sizes Installation Process
157 12
12mm X 157mm X 2440mm
STEP1
Measure the total area for installion of cladding.
Step 5
Fix Cladding Sheet on a construction bar using SS Screw ( Size 32mm - 4mm ).
Step 6
In case you are constructing a fence, it is necessary to have a gap of 4 - 5 mm
between each row. This may vary depending on the project specification &
requirements
Step 4
Install a construction bar with space of 450mm-600mm between each bar. This
may vary depending on the project specification and requirements.
Step 3
a. Fencing - Dig a ground or construct a cement block to install construction bar.
This will provide strength to frame of construction bar. This step is necessary for
building fence. Eg Net height of fence is 10ft. Dig 2ft down from the surface.
b. Wall Cladding - Install the construction bar on the wall vertically or horizontally.
Screw the construction bar with a gap of 2ft between each screw.
Step 2
Depending on the height of the required premises choose the length of the
construction bar to do a framing.
Synwood Cladding

6. Synwood decking is made from PVC, which is long
lasting and holds up against heat, cold, rain and snow
weather conditions. Synwood decking can be used at
swimming pools decks, metro stations, ship decks, any
other outdoor decking or outside house deck flooring.
COLOURS
B97 ( 21MM ) 390 ( 21 MM )
T83 ( 12MM )T85 ( 12MM )

7. POOLS - GARDENS - RESORTS - FARM HOUSE - COURTYARDS -
LANDSCAPING - PERGOLA FLOORING - STAIRCASE - BENCHES
APPLICATIONS
Installation Process
STEP 1
Examination of surface.
- Check the floor for surface evenness.
- If the floor surface is not even or plain, make the surface plain & even.
- Maximum variation of 2-3mm is acceptable.
STEP 2
The surface area should be a hard surface. Poor surface leveling would lead to
deformation & poor structural shape.
STEP 4
- Start installing deck from one corner.
STEP 5
- If we are using Synwood Decking Clips, a gap of approx 6 to 8 mm will be created
for the free movement of water so that the surface is dry.
- Use SS A-Type screws to install the decking with the clips.
STEP 6
If we are directly screwing the decking.
- Only A-type thread screws of minimum 38 mm in length should be used for
installing Synwood decking. Only screw should be used, no nailing on the deck.
- Screw Synwood Decking at the distance of 10 mm from the edges. The distance
between screws along the plank length should be 210mm.
STEP 3
- Framing should be done at a distance of 210mm x 210mm with 25 x 50 / 35 x 60
mm Synwood construction bars or battens.
- Start the framing from one corner which should be perpendicular to one end of
the corner.
- Check & maintain the dept difference. ( Should not be more than 3 mm )
- Framing of construction bars / battens should be equidistant and parallel from
one another in the direction of the surface slope for better flow of water.
- Make sure there is free movement of water towards the drainage.

9. Synwood Construction Bars are used for window frames, door
frames, fencing framing, garden benches and landscape
designing such as landscape flooring, panels, striped board
etc. These bars have high density, sturdy, finished surface and
have accurate dimensions. Highly recommended for structures
making.
COLOURS
3W2 380 B97390

10. APPLICATIONS
FLOOR PLATFORM
GARDEN DECK
DOOR FRAME
BENCHES / CHAIRS
POOL DECK FRAME
CEILING FRAME