1. Swagemaster 2016/2017
Manufacture & Stock

2. Contents
Contents Page 1 – Introduction.
Page 2 – Flanges ANSI B16.5 ,JIS, Gost.
Page 3 - Nipoflange, Weldo-flange & Olets.
Page 4 – Spectacle Blinds, Spades & Spacers.
Page 5 – BW Fittings ANSI B16.9.
Page 6 – Forged Fittings ANSI B16.11.
Page 7 – Seamless & Welded Line pipe.
Page 8 – Structural Beams & Sections.
Page 9 – Fabrication and Custom Design.
Page 10 – Polypropylene Pipes & Fittings.
Page 11 – Contact Information.

3. Swagemaster specialize in manufacturing and sourcing related commodities from the Petrochemical, Oil and Gas industry. We Manufacture a
wide range of Flanges, Spectacle Blinds, Spacers, Spades and fittings to our own Swagemaster brand as well as stocking a large consignment
of European and USA Pipes, fittings and Flanges.
Over the past Decade Swagemasters market growth has risen at an unprecedented rate due to key factors of constant investment in products,
personnel, facilities and plant.
Our expertise in procurements is also second to none and if the item required can not be Manufactured or supplied from stock, our
Dedicated sales staff will endeavour to find the solution from within our vast network of suppliers and Manufacturers that we work closely
With every day.
Introduction

4. Swagemaster manufacture and supply the highest quality of Flanges from only
European and USA sourced quality forgings.
Our Flanges are available in various formats such as
• Slip On
• Blind Flange
• Weldneck
• Long Welded Neck.
• Socketweld
• Threaded
• Lap Joint
• Orifice
We manufacture to a wide range of flange specifications from industry standard
ASTM to End user project requirements that require tightly controlled material
conformity.
Materials
Stainless A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L
Carbon Carbon Steel - A105, C22.8 Low Temperature Steel A350, LF2, LF3, LF6
Alloy Steel Alloy Steel - A182 F1, F5, F9, F11, F12, F22, F91 High Yield A694, F42, F52,
F60, F65, F70
Duplex & Super Duplex A182 F51, F44, UNS S32760
Nickel Alloys 200, 400, 600, 625, 800, 825
Unusual Grades Bronze, Brass, Copper, Cupro Nickel, Titanium
Specifications
Available Sizes 1/4" through to 64" Wall thickness Schedule 5s through to Schedule XXS
and heavier.
Dimensions & Pressure Rating JIS Gost ANSI, MSS- SP-44, BS3293, API 605 150lb through to 2500lb
Available Facing Raised Face, Ring Type Joint Large Tongue & Groove, Small Tongue &
Groove BS4504 - PN6, 10, 16, 25 & 64 BS10 - Table D, E, F & H
Flanges From
Manufacture and Stock
Just a few of the Major brands we have in our current stock range.

5. Swagemaster manufacture and supply the highest quality of Nipo-Flanges, Olets and Weldolet Flanges to meet the exacting
requirements of the International Petrochemical Industry as well as Bi-spoke Client designs.
Materials
Stainless A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L
Carbon Carbon Steel - A105, C22.8 Low Temperature Steel A350, LF2, LF3, LF6
Alloy Steel Alloy Steel - A182 F1, F5, F9, F11, F12, F22, F91 High Yield A694, F42, F52, F60,
F65, F70
Duplex & Super Duplex A182 F51, F44, UNS S32760
Nickel Alloys 200, 400, 600, 625, 800, 825
Unusual Grades Bronze, Brass, Copper, Cupro Nickel, Titanium
Specifications
Available Sizes Branch sizes ½” – 2” Sch 40- XXS, Run size
to order.
Dimensions &
Pressure Rating
ANSI B16.5, B16.47 , 3000, 6000lb , 150LB
– 2500LB
Available Facing Raised Face, Ring Type Joint ( RTJ ) & Flat
Face.
NipoFlange, Olet, Weldoflange
From Manufacture and Stock

6. Swagemaster specialize in manufacturing Spectacle Blinds, Spades and Spacers to both
industry standard ASME B16.48 to Bi-Spoke client specifications, all from hand picked
European Quality Plate material.
With large stocks on the shelf available for same day dispatch, this particular
Swagemaster product has heavily supported many of the worlds largest projects over
the last decade and is Widley trusted within the Industry.
Materials
Stainless A240-316/316L, A240-304/304L, A240-321,
A182 F304/L/H, F310/H, F316/L/H, F321/H,
F347/H, F410, F440, 904L
Carbon A516-60/65/70 + 70 HIC Resistant, A105, C22.8
Low Temperature Steel A350, LF2, LF3, LF6
Duplex & Super
Duplex
UNS S31803, UNS S32205, UNS S32750,UNS
S32760
Specifications
Available Sizes ½” ( DN15 ) through to 72 ” ( DN1800 )
Dimensions &
Pressure Rating
All fittings are designed in accordance with
ASME B16.48 unless otherwise specified.
Typical Asme B16.48 ratings from 150lb
through to 2500lb We also supply many
other projects such as Total, Shell, Maersk
which all vary dimensionally.
Available Facing Raised Face, Flat faced, Female Ring Type
Joint, Male Ring Type Joint & Special items
according to customer drawings.
Spectacle Blinds,Spacers &
Spades, Manufactured

7. Swagemaster keep vast stocks of Buttweld fittings in Stainless Steel, Alloy, and both High and Low temperature grades of
Carbon, sourced only from Major European or USA Manufacturers. Swagemaster Also Manufacture our own brand of
Concentric and Eccentric Reducers
Since 1990.
• Stocked Buttweld Fittings Include:
• Elbows ( 90 Deg & 45 Deg )
• Equal & Reducing Tees
• Cross’s both equal and un Equal.
• Concentric & Eccentric Reducers.
• Caps.
• More on request.
Specifications
Available
Sizes
1/4" through to 64"
Dimensions
& Pressure
Rating
Schedule 5s through to Schedule XXS and heavier
All pipe fittings are made and controlled to the relevant
standards such as: ASME, ASTM, BS and DIN/WERKSTOFFE.
BS 1640/ANSI - ASME B16.9 - B16.28 - B16.25 Seamless,
Welded, Welded X-Ray.
Available
Ends &
Finishes
Buttweld Ends, Self Colour or HDG
Materials Stainless A403-WP-316/316L, 304/304L, 321, F304/L/H,
F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L
Carbon A234-WPB, A420-WPL6
Others on Request.
Just a few of the Major brands we have in our current stock range.
Butt-Weld Fittings
From Manufacture and Stock

8. Swagemaster keep vast stocks of Forged Fittings in Stainless Steel, Alloy, and both High and Low temperature grades of
Carbon, sourced only from Major European or USA Manufacturers. Swagemaster Also Manufacture our own brand of Forged
fittings on request made from forged Bar with very impressive lead times.
• Stocked Forged Fittings Include:
• Elbows ( 90 Deg & 45 Deg , SR & LR )
• Equal & Reducing Tees.
• SW & Threaded Unions.
• Concentric & Eccentric Reducers.
• Swaged Nipples.
• Hexagon Nipples.
• Caps.
• Couplings Half & Full.
• Roundhead & Hex head Plugs.
Forged Fittings
From Manufacture and Stock
Materials
Stainless A182 F304/L/H, F310/H, F316/L/H, F321/H, F347/H, F410, F440, 904L
Carbon Carbon Steel - A105, C22.8 Low Temperature Steel A350, LF2, LF3, LF6
Alloy Steel Alloy Steel - A182 F1, F5, F9, F11, F12, F22, F91 High Yield A694, F42, F52, F60,
F65, F70
Duplex & Super Duplex A182 F51, F44, UNS S32760
Nickel Alloys 200, 400, 600, 625, 800, 825
Unusual Grades Bronze, Brass, Copper, Cupro Nickel, Titanium
Just a few of the Major brands we have in our current stock range.

9. Swagemaster Source and stock seamless Carbon, Alloy, Duplex and stainless linepipe all from major European and USA
manufacturers.
• Manufacturing Standards: ASTM, EN, DIN, BS, GOST
• Carbon steel: A333 Gr.6, A106 Gr B/A/C, API 5L X42, X46, X52,X60, X65, X70 (PSL1 & PSL2), P235HG,P265GH (TC1 & TC2),
S355J2H, P355N, P420N, L245NB, L290NB, ST37.8, ST35.8
• Stainless & Duplex steel: TP304L, TP316L, TP316TI,TP317L, TP304H, TP310S, TP321H, TP347H, TP904L, S31803, S32760,
S32750, S32205, 1.4301, 1.4306, 1.4541, 1.4404, 1.4401, 1.4571.
• Alloy steel: A335-P1,P5, P9, P11, P22, P91,P92, 16Mo3, 13CrMo4-5, 10CrMo9-10, X11CrMo5, X10CrMoVNb9-1,
X20CrMoV1-1.
• Nickel alloy steel: Alloy 825, Alloy 800H, Alloy 625, Alloy 600, Alloy 400, Alloy 200/201, Hastelloy C276
• Sizes: from 1/2" up to 102" / SCH STD up to SCH160/XXS / 1.5mm to 60.0mm
• Availability: Pp to 24” Seamless & from 24” to 102” SAW/ERW Welded - Ends Bevelled / Plain - Stock / Production
• Lengths: SRL 5-7 metres and DRL 9-13 metres
Just a few of the Major brands we have in our current stock range.
Line Pipe Supply & Stock

10. Swagemaster Source and stock Structural European Beams, Channels and Angles to BS EN 10025 in a multiple of grades from
S275, S355 J2 (+N,M,AR )
Angles
We stock hot-rolled equal and unequal angles in grade S355J2. We carry a full assortment of products in almost any
dimensions including special sizes.
But please also call us whenever you need angles of grade S235JR.
Dimensions:
Equal angles from 20 x 20 x 3 mm to 300 x 300 x 38 mm
Unequal angles from 30 x 20 x 3 mm to 250 x 90 x 16 mm
Flat Bars
Flat bars in grades S355J2 and C-45 are kept in our stock.
We carry a full assortment of products in almost any dimension,
including special sizes.
But flat bars in grade S235JR are also available from us.
Range of dimensions: Thicknesses: 3 – 100 mm, Widths: 15 – 600 mm
The standard length is 6,000 mm, but many dimensions are also available in lengths of 12,000 mm.
Sections
UNP 80 – 400 mm
UPE 80 – 400 mm
INP 80 – 600 mm
IPE 80 – 750 mm
HEA 100 – 1000 mm
HEB 100 – 1000 mm
HEM 100 – 1000 mm
The above sections are regularly stocked by us in standard lengths of 12 m. Works certificates according to DIN 50049/3.1 are
available for sections in grade S355J2. At least 2.2 certificates are available for sections in grade S235JR.
Structural, Plate, Beam, Angle
& Channel

11. Swagemaster Specialize in Manufacture and procurement of fittings and assembles from design stage to completion.
Contact us about our fabrication and procurement services.
 Swagemaster were asked to supply these Electrical Lighting Posts
which consisted of low temperature graded pipe and fittings,
Galvanized, threaded and welded, all from design stage to final
shipment.
 Swagemaster were asked to supply these 60” Lobster Style
Elbows Constructed from Low temperature HIC resistant Plate
hand picked to the clients sensitive specification.
 One of our clients requested this unusual long weldneck flange
which comprised of an A350-LF2 Body with Stainless 316L
Inserted & Welded inside.
Custom Fabrications
& Design

12. Swagemaster Supply a range of Polyethylene Fittings and Pipes.
For more information please contact a member of our Sales team.
• PVC-U Un-Plasticised Polyvinyl Chloride
• PVC-C Chlorinated Polyvinyl Chloride
• ABS Acrylonitrile Butadiene Styrene
• PP Polypropylene
• PE Polyethylene
• PVDF Polyvinylidene Fluoride
Polyethylene Pipe & Fittings
Just a few of the Major brands we have in our current stock range.

13. Contact Information
Swagemaster Engineering Services ltd.
Lint House , Lint house Lane
Wolverhampton
Wv113EA
United Kingdom
Telephone +44 (0) 1902 906060
Sales Enquires : Sales@Swagemaster.com
Webiste: Swagemaster.com