This is my CV. I am An energetic, unique thinker and eager to learn new technology student pursuing the degree in Mechanical Engineering seeking for the career opportunity in a firm to utilise and build upon skills in a challenging environment to explore and adapt myself in different fields and realise my potential & where I get the opportunity for continuous learning.
This report is a short description of our one week internship carried out as a component of the BE programme. The internship was carried out within the company Vignesh Vidyuth Controls in 2016. Since we are interested in transformers and their manufacturing process, the work was concentrated on manufacture, design, and mainly testing of the produced transformers.
This is my Summer Training Report in B.H.E.L., Haridwar on General Awareness Of Steam Turbine in Turbine Block-III in the period 17/06/13 to 31/07/13.
I would like to thank My Mentor Mr. Alok Shukla Sir, My Guide Asst. Prof. Mr. Anuj Dixit Sir. Without their guidance and efforts it was impossible to achieve.
This report is a short description of our one week internship carried out as a component of the BE programme. The internship was carried out within the company Vignesh Vidyuth Controls in 2016. Since we are interested in transformers and their manufacturing process, the work was concentrated on manufacture, design, and mainly testing of the produced transformers.
This is my Summer Training Report in B.H.E.L., Haridwar on General Awareness Of Steam Turbine in Turbine Block-III in the period 17/06/13 to 31/07/13.
I would like to thank My Mentor Mr. Alok Shukla Sir, My Guide Asst. Prof. Mr. Anuj Dixit Sir. Without their guidance and efforts it was impossible to achieve.
Industrial training report Satna Cement Works (Birla Corp Ltd), Satna, Madhya...Sushant Siddhey
This report covers the complete description of my training and experience at Satna Cement Works (Birla Corp Ltd). This report shows various steps of cement production and various types of machines and equipment involved. This also shows the layout of plant and production cycle.
Summer training report on NTPC Badarpur ,DELHI
This Report includes the following department
1. Turbine Maintenance Department
2. Boiler Maintenance Department
3. Plant Auxiliary Maintenance
4. Coal Handling Department
Barauni Refinery is the second Public Sector Refinery of Indian Oil Corporation built in collaboration with erstwhile USSR and limited participation of Romania. It is located near the northern bank of river Ganga in Begusarai district of Bihar. The refinery went on stream in the year 1964 and was formally inaugurated by Prof. Humayun Kabir, the then Union Minister for Petroleum & Chemicals, Govt. of India on 15th January,1965.
Start Up and Commissioning of Supercritical Power Stations: Risk Management P...HIMADRI BANERJI
Start Up protocols play a major part in risk management for modern Supercritical power plants especially during start-up and commissioning. EPC contractors must be alert to contract conditions set by owners and start up engineers on deviation of steam and water chemistry conditions especially.
kota super thermal Power station training reportEr. Aman Agrawal
it is a practical training report on kota super thermal power station
For any other enquiry u can contact me on +919540278218....
and can join my Page www.facebook.com/engineeringindia
I had the opportunity to visit an onshore drilling rig of ONGC and had done a project on "Mud Circulation System and Mud handling Equipments in a drilling Rig". I got introduced to various drilling activities, mud tanks, mud handling equipments, mud pumps, solid removal system and other control equipments. I learnt and saw how oil and gas is extracted from the earth crust at 3km depth.
Industrial training report Satna Cement Works (Birla Corp Ltd), Satna, Madhya...Sushant Siddhey
This report covers the complete description of my training and experience at Satna Cement Works (Birla Corp Ltd). This report shows various steps of cement production and various types of machines and equipment involved. This also shows the layout of plant and production cycle.
Summer training report on NTPC Badarpur ,DELHI
This Report includes the following department
1. Turbine Maintenance Department
2. Boiler Maintenance Department
3. Plant Auxiliary Maintenance
4. Coal Handling Department
Barauni Refinery is the second Public Sector Refinery of Indian Oil Corporation built in collaboration with erstwhile USSR and limited participation of Romania. It is located near the northern bank of river Ganga in Begusarai district of Bihar. The refinery went on stream in the year 1964 and was formally inaugurated by Prof. Humayun Kabir, the then Union Minister for Petroleum & Chemicals, Govt. of India on 15th January,1965.
Start Up and Commissioning of Supercritical Power Stations: Risk Management P...HIMADRI BANERJI
Start Up protocols play a major part in risk management for modern Supercritical power plants especially during start-up and commissioning. EPC contractors must be alert to contract conditions set by owners and start up engineers on deviation of steam and water chemistry conditions especially.
kota super thermal Power station training reportEr. Aman Agrawal
it is a practical training report on kota super thermal power station
For any other enquiry u can contact me on +919540278218....
and can join my Page www.facebook.com/engineeringindia
I had the opportunity to visit an onshore drilling rig of ONGC and had done a project on "Mud Circulation System and Mud handling Equipments in a drilling Rig". I got introduced to various drilling activities, mud tanks, mud handling equipments, mud pumps, solid removal system and other control equipments. I learnt and saw how oil and gas is extracted from the earth crust at 3km depth.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
Suryajeet cv NIT AGARTALA
1. 1
SURYAJEET KUMAR JHA
Current Address:
Room No-F-218, Block-F, Mobile No.: +91-8131036977
Aryabhatta Hostel, NIT Agartala E-mail: skumarjha718@gmail.com
Dist.- West Tripura (Tripura) LinkedIn: www.linkedin.com/in/suryajeet-
India- 799046 kumar-jha-357597b9
Educational Details:
Year Degree Institute Percentage/CGPA
2014-
Present
B.Tech.
Mechanical
Engineering
National Institute of Technology,
Agartala
CGPA=8.40/10
(up to 6th
sem)
2012-14 XIIth
BSEB Patna
Janta College, Laukaha, Madhubani 70.6%
2011-12 Xth
BSEB Patna
L.N.J. High School, Laukaha,
Madhubani
78.8%
Objective:
An energetic, unique thinker and eager to learn new technology student pursuing the degree in Mechanical
Engineering seeking for career opportunity in a firm to utilise and build upon skills in a challenging environment
to explore and adapt myself in different fields and realise my potential & where I get the opportunity for continuous
learning.
Academic Achievements:
❖ Ranked 17,814 in the Joint Entrance Examination (JEE-Main 2014) taken by over 13 lacs students
across the country.
❖ NMMS Scholar: Among the top students receiving National Means-cum-Merit Scholarship (NMMS
2010) District Topper.
Internship & Trainings:
❖ Summer Internship at SKF India Ltd, in Industrial Markets BU {15/05/2017 – 30/06/2017}.
❖ Summer Internship at Diesel Locomotive Works, Varanasi (U.P. India) from (01/06/2016 to
30/06/2016).
❖ Special internship program on automobile basics, advanced systems & SAE car design and fabrication
at AUTONEXT Jamshedpur {Jharkhand}.
❖ Training of Conventional turning-milling-grinding, Reverse Engineering, laser machining, CNC milling
& turning, In-plant training in Production Department at CTTC Bhubaneshwar, Orissa{INDIA}.
❖ Project on “Manufacturing of Hand Injection Mould”.
❖ Specialization training in “CATIA”
❖ Basic course in “ANSYS"
Projects:
❖ “Design Improvement and analysis of heavy duty truck chassis frame & its effect on global warming”
under the guidance of Mr. Arindam Majumder (Asst. Prof. NIT Agartala) (About to be published)
❖ Ongoing project on "film boiling of liquid hydrogen on vertical flat plate" under the guidance of Mr.
Deepak Chandra Das (Asst. Prof. NIT Agartala).
❖ Paper on "Design and simulation of fatigue analysis for the heavy-duty truck chassis frame " has been
published and presented at "International Conference on Innovations and Developments in Mechanical
Engineering" IDME'17 with very good reviews.
❖ Ongoing project on "Exergy efficiency applied for the performance optimization of CI engine using
biofuels" under the guidance of Dr. Abhishek Paul (Asst. Prof. NIT Agartala)
2. 2
Workshops Attended:
❖ Thirtieth National Convention of Production Engineers and National Seminar on sustainable
manufacturing (July 18-19, 2015).
❖ Two days’ workshop of AUTONEXT on latest technology of Tata Motors at NIT Agartala.
Extra-Curricular Activities:
❖ Student Member of Indian Society of Heating Refrigerating & Air Conditioning Engineers (ISHRAE).
❖ Have organized the Robotics events Hydraulics and Blindfold in Advaitam 2015 (Techno-cultural Fest
NIT Agartala)
❖ Placed the 2nd position in Hydraulic and Constellation event at Advaitam 2014 (Techno cultural Fest
NIT Agartala).
❖ Participated in Hindi Divas competition-2015 at NITA and placed first position.
Special Achievements:
❖ Awarded with Bihar Bal Shree Samman-2011 by Shree Nitish Kumar (Honourable Chief Minister of
Bihar) for Excellency in Creative Writing.
Software Skills:
ANSYS (Basic), Basics of Microsoft Office, Programming Languages: C, Platforms: MS Windows, CATIA V5
(Basic), SolidWorks.
Position of Responsibility:
❖ Student Internship Co-Ordinator at centre for career (CCD) development NIT Agartala.
❖ Served as Class representative (Mechanical) for the year 2015-Till Now. I am the class representative of
the section–B in Mechanical Engineering (2014-2018 batch) Department. I was responsible for creating
a consensus among the students on crucial academic issues and acting as a liaison between the student
body and the department faculty.
❖ Member of T&P committee formed by mechanical engineering department NITA.
Personal Details:
Father’s Name: Birendra Kumar Jha
Mother’s Name: Usha Devi
Date of birth: 15th
Dec 1996
Blood Group: AB (+VE)
Nationality: Indian
Language: English (Efficiently Speak, Read & Write), Hindi (Mother Tongue),
Maithili (Native & Bilingual proficiency)
Permanent address: Vill + Post +P.S. – Laukaha, District- Madhubani (Bihar), India-847421
References: Available Upon Request
Self-Declaration:
I am not a super smart but hardworking person, honest individual. I am a good timekeeper, willing to learn new
skills. I am friendly, polite and helpful, have good sense of humour. I am able to work independently in busy
environments and also within a team setting. I hereby declare all the information given is correct to the best of my
knowledge.
Date: 6th
-July-2017
Place: NIT Agartala Suryajeet Kumar Jha