Surface area and porosimetry analyzer finished installation at universiti tun hussein onn malaysia

1. Surface Area and Porosimetry Analyzer
Finished Installation at
Universiti Tun Hussein Onn Malaysia
PRESENTED BY GOLD APP INSTRUMENTS
HI

2. Surface Area and Porosimetry Analyzer Finished Installation at
Universiti Tun Hussein Onn Malaysia
Gold APP Instruments Corporation
China had finished installation and
calibration work of one set V-Sorb
4800P high throughput surface
area and porosimetry analyzer at
Universiti Tun Hussein Onn
Malaysia under helps of Mr. Melvin
from Crest NanoSolutions (M) Sdn
Bhd.

3. Surface Area and Porosimetry Analyzer Finished Installation at
Universiti Tun Hussein Onn Malaysia
After 5 hours direct flight trip, engineer reached
Kuala Lumpur International Airport safely and
met Mr. Melvin who was already waiting outside
of the exit door. Then drove car to UTHM
without stop. Thanks to UTHM helps, engineer
finished analyzer and separate degasser
installation at that day. Here are few pictures
show UTHM outlook and V-Sorb 4800P surface
area and porosimetry analyzer installed at their
lab.

4. Surface Area and Porosimetry Analyzer Finished Installation at
Universiti Tun Hussein Onn Malaysia
Surface Area
and Porosimetry
Analyzer V-Sorb
4800P installed
at UTHM LAB

5. Surface Area and Porosimetry Analyzer Finished Installation at
Universiti Tun Hussein Onn Malaysia
In following few days, our engineer got
the communication between analyzer and
computer succeed, used Reference
Materials carbon black and sieve to
calibrate analyzer surface area and pore
size working ability, ensure the surface
area and porosimetry analyzer was in well
condition and can begin to test UTHM
own samples. Then gave a comprehensive
introduction and training of the whole
system. Finally, UTHM spoke highly of the
whole procedures and analyzer.
CLICK HERE TO ADD YOUR TITLE
点击此处添加标题

6. Surface Area and Porosimetry Analyzer Finished Installation at
Universiti Tun Hussein Onn Malaysia
CLICK HERE TO ADD YOUR TITLE
点击此处添加标题

7. Surface Area and Porosimetry Analyzer Finished Installation at
Universiti Tun Hussein Onn Malaysia
The V-Sorb 4800P analyzer with 4 testing ports, all can test surface area, mesopore and micropore.
A separated degasser with 4 ports, can pretreat samples efficiently. Stainless steel manifold system
with hard seal VCR sealing, plus pneumatic valves system ensure no leakage happen. Germany
branded vacuum pump can help to reach a very low ultimate pressure, Japan branded 4 liter
stainless steel Dewar can support at least 72 hours without refilling LN2. All these make the V-Sorb
4800P surface area and porosimetry analyzer to be the best choice of researching lab like UTHM.
For more information about surface area and pore size analyzer, gas pycnometer helium density
analyzer, high pressure volumetric adsorption analyzer etc, pls visit www.jinaipu.com or email us at
sales@jinaipu.com .

8. PRESENTED BY GOLD APP INSTRUMENTS
THAN
K
YOU