SULTHANA PARVIN
•Download as DOCX, PDF•
1 like•188 views
Sulthana Parvin is a 2016 graduate of electrical and electronics engineering from Velammal College of Engineering and Technology in Madurai, India. She is seeking a challenging position in transmission and distribution engineering. She has experience with programming languages like C and C++. Additionally, she has participated in workshops, presented papers at conferences, completed industrial visits and in-plant trainings. Her academic qualifications include high marks from her secondary and higher secondary studies.
Report
Share
Report
Share
Recommended
Monu_Resume
Monu Kumar is seeking a challenging career that utilizes his technical and analytical skills and allows him to enhance his knowledge. He has a B.Tech in Electronics and Communication Engineering from Maharshi Dayanand University. He has undergone industrial training at Bharat Sanchar Nigam Limited and Delhi Metro Rail Corporation. His hobbies include listening to music and watching cricket.
My Own CV
Rishabh Kumar Deb is seeking a challenging career that utilizes his technical and analytical skills. He has an undergraduate degree in electronics and communication engineering from Greater Kolkata College of Engineering & Management, with a 7.37 CGPA. His areas of interest include designing and developing. He has undergone training in signaling systems, PLC, SCADA and basic television engineering.
first
Mirza Abdullah Al Maruf is seeking a challenging position to enhance his professional skills. He has a Bachelor of Science in Electrical and Electronic Engineering from Chittagong University of Engineering and Technology with a CGPA of 3.54. His undergraduate thesis was on "GSM Based Motor Control". He has experience with CAD, MATLAB, programming languages, and has completed professional trainings and industrial tours. He is proficient in English, Bengali, and seeks to further develop his skills.
vivek resume91015
Vivek Kumar Maurya is seeking a challenging and encouraging career that offers exposure to latest trends. He has a B.Tech in Electronics and Communication Engineering from Devprayag Institute of Technical Studies with percentages ranging from 59.7% to 73.1% across semesters. He has experience in communication, navigation and surveillance from training programs and experience with embedded systems, robotics, programming languages and Microsoft Office software. His personal details and contact information are also provided.
satheesh Resume1
Satheesh Kumar is a fresher seeking hands-on experience to build a career in electronics and communication engineering. He completed his B.E. in Electronics and Communication Engineering from Vel tech high tech Dr.Rangarajan Dr.Sakunthala Engineering College in 2015 with a CGPA of 6.3. His technical skills include C, C++, and he is learning Dot net. He has experience from internships in a thermal power station, a telecom network introduction, an automatic vehicle monitoring system, and measuring human vitals.
Rit dubai bachelor mechanical engeering
The mechanical engineering program at the Rochester Institute of
Technology is designed to equip students with a broad base of
science and engineering knowledge complemented by hands-on
laboratory activities, a capstone graduation project, and
cooperative training experience. Students devote their rst two
years to the study of mathematics, physics, liberal arts, and
engineering sciences.
http://www.rit.edu/dubai/academics/mechanical-engineering-bs
Resume
I did my bachelors in Mechanical Engineering and am currently in my final semester of Masters in Oil and Gas Engineering. Keen to work as a graduate engineer in a reputed company.
ANSHUL(RESUME)
Anubhav Kumar is seeking a position in electronics communication engineering where he can utilize his skills and knowledge. He has a B.Tech in electronics and communication engineering from IIMT Engineering College with 65% marks. He has technical skills in MS Office, internet applications, and embedded systems. He completed a one month vocational training at Bharat Heavy Electricals Limited and a four week summer training on embedded systems. His project involved building a robotic vehicle controlled by cell phones using DTMF commands and a PIC microcontroller. He is motivated, dedicated to work, and participates in college events.
Recommended
Monu_Resume
Monu Kumar is seeking a challenging career that utilizes his technical and analytical skills and allows him to enhance his knowledge. He has a B.Tech in Electronics and Communication Engineering from Maharshi Dayanand University. He has undergone industrial training at Bharat Sanchar Nigam Limited and Delhi Metro Rail Corporation. His hobbies include listening to music and watching cricket.
My Own CV
Rishabh Kumar Deb is seeking a challenging career that utilizes his technical and analytical skills. He has an undergraduate degree in electronics and communication engineering from Greater Kolkata College of Engineering & Management, with a 7.37 CGPA. His areas of interest include designing and developing. He has undergone training in signaling systems, PLC, SCADA and basic television engineering.
first
Mirza Abdullah Al Maruf is seeking a challenging position to enhance his professional skills. He has a Bachelor of Science in Electrical and Electronic Engineering from Chittagong University of Engineering and Technology with a CGPA of 3.54. His undergraduate thesis was on "GSM Based Motor Control". He has experience with CAD, MATLAB, programming languages, and has completed professional trainings and industrial tours. He is proficient in English, Bengali, and seeks to further develop his skills.
vivek resume91015
Vivek Kumar Maurya is seeking a challenging and encouraging career that offers exposure to latest trends. He has a B.Tech in Electronics and Communication Engineering from Devprayag Institute of Technical Studies with percentages ranging from 59.7% to 73.1% across semesters. He has experience in communication, navigation and surveillance from training programs and experience with embedded systems, robotics, programming languages and Microsoft Office software. His personal details and contact information are also provided.
satheesh Resume1
Satheesh Kumar is a fresher seeking hands-on experience to build a career in electronics and communication engineering. He completed his B.E. in Electronics and Communication Engineering from Vel tech high tech Dr.Rangarajan Dr.Sakunthala Engineering College in 2015 with a CGPA of 6.3. His technical skills include C, C++, and he is learning Dot net. He has experience from internships in a thermal power station, a telecom network introduction, an automatic vehicle monitoring system, and measuring human vitals.
Rit dubai bachelor mechanical engeering
The mechanical engineering program at the Rochester Institute of
Technology is designed to equip students with a broad base of
science and engineering knowledge complemented by hands-on
laboratory activities, a capstone graduation project, and
cooperative training experience. Students devote their rst two
years to the study of mathematics, physics, liberal arts, and
engineering sciences.
http://www.rit.edu/dubai/academics/mechanical-engineering-bs
Resume
I did my bachelors in Mechanical Engineering and am currently in my final semester of Masters in Oil and Gas Engineering. Keen to work as a graduate engineer in a reputed company.
ANSHUL(RESUME)
Anubhav Kumar is seeking a position in electronics communication engineering where he can utilize his skills and knowledge. He has a B.Tech in electronics and communication engineering from IIMT Engineering College with 65% marks. He has technical skills in MS Office, internet applications, and embedded systems. He completed a one month vocational training at Bharat Heavy Electricals Limited and a four week summer training on embedded systems. His project involved building a robotic vehicle controlled by cell phones using DTMF commands and a PIC microcontroller. He is motivated, dedicated to work, and participates in college events.
SEKHAR RESUME 2015 (10)
Chandra Sekhar Pinninti is seeking a career opportunity that utilizes his technical and analytical abilities. He has a B.Tech in ECE from Vignan's Institute of Information Technology with 74.6% marks. He has skills in languages like C and packages like MATLAB and PSPICE. He has participated in robotics competitions and presented papers at conferences. His academic project involved developing a Wi-Fi controlled robot with night vision camera. He is a quick learner with good technical knowledge and ability to work in teams.
sumeet
This curriculum vitae is for Mahale Sumeet Sanjay, who has a diploma in electronics and telecommunications from Guru Gobind Singh Polytechnics in Nashik. He is seeking a challenging position where he can apply his creativity, strong sense of responsibility, and perseverance. He has experience working as a trainee and junior engineer, and his education includes an SSC, HSC in electronics technology, and a diploma in electronics and telecommunications.
priyank resume1
Priyank Modi seeks to utilize his technical skills and competency to help organizations and individuals grow. He has a Bachelor of Engineering degree in Mechanical Engineering from Truba Institute of Engineering and Information Technology with a 7.8 CGPA. His areas of interest include thermodynamics, fluid mechanics, and he is proficient in the C programming language.
my cv
Abinash Thiruvan's curriculum vitae summarizes his objective, qualifications, experience, and skills. He has a Bachelor of Engineering in Mechanical Engineering from Anna University and topped subjects like Design of Machine Elements. His projects include designing an automatic vehicle signal system using sensors and a bowl pressure testing machine. Abinash is proficient in AutoCAD, Solidworks, and Microsoft Office applications. His areas of interest are in automobile, production, and industrial engineering. He declares the information provided is accurate and pledges loyal service if selected.
R2016 be extc syllabus even
This document provides information on the revised syllabus for Electronics and Telecommunication Engineering under the University of Mumbai's Faculty of Technology. It discusses the implementation of the Choice Based Credit and Grading System from the academic years 2016-2017 onwards. The preamble outlines the philosophy of outcome-based education and focus on continuous evaluation to enhance quality. It also details the credit assignment policy and grading system. The document then provides course details for the 8th semester, including the list of elective courses available.
Vinay new
This document is a resume for G. Vinay. It summarizes his objective, academic qualifications, skills, interests and experience. Vinay has a B.Tech in ECE from ASIT, Gudur in 2016. He is proficient in programming languages like C and software like MATLAB. His areas of interest are electronic devices and circuit analysis. He has participated in various college competitions and activities. His academic project involved pan sharpening of satellite images using non-subsampled contourlet transformation in MATLAB.
anmol cv 1
Anmol Ranjan Srivastava's curriculum vitae provides information about his objective, academic and professional qualifications, training, computer skills, seminars attended, awards received, personal strengths, and contact details. His objective is to utilize his educational and professional skills in a challenging position to boost his professional growth. He has a B.Tech in Mechanical Engineering with over 72% aggregate and has received training in industrial programs. His personal strengths include good communication skills, willingness to learn, and being optimistic.
Manjunath Resume
K.S. Manjunath is seeking a suitable career opportunity in an esteemed organization. He is currently pursuing his Bachelor of Engineering in Electronics and Communication engineering from Sri Shanmugha College of Engineering and Technology, affiliated with Anna University, Chennai with an 8.146 CGPA. He has completed certifications in Embedded Systems and Web Technology. His technical skills include Embedded C, C language, and ASP.NET. He is interested in digital electronics and has completed a mini project on preventing vehicle theft using embedded systems. He has also participated in seminars and workshops on related topics.
Muhammad yousaf resume (january 2016)
Muhammad Yousaf has a B.Sc in Chemical Engineering from the University of Engineering and Technology Lahore with a GPA of 3.26. He has experience interning at a cement plant and an auto parts manufacturer where he analyzed processes and recommended improvements. Yousaf held leadership roles as the lead committee member of the largest event management society at his university, organizing events for over 250 attendees. He has received multiple academic scholarships and awards for his achievements.
Mmmec brochure
This document provides information about Madan Mohan Malaviya Engineering College, which is celebrating its 50th anniversary. It discusses the college's vision, principal's message, departments, research work, facilities, and past recruiting companies. The college was established in 1962 and has six departments covering engineering, science, and management. It aims to provide quality education and develop students into excellent professionals.
EKTA TEACHING
Ekata P Patil has 3 months of teaching experience and seeks a career opportunity to fully explore her potential. She has a Master's degree in VLSI and Embedded Systems from BVCOEW, Pune in 2015 and a Bachelor's degree in Electronics and Telecommunications from JTMCOE, Faizpur in 2013. Her projects include a microcontroller-based portable data logger for medical applications and a PIR sensor-based human detection system. She has technical skills in programming languages like VHDL, Verilog, and C and software like Matlab, Latex, Xilinx, and Modelsim.
Shafeek-Resume
Shafeek Ahamad is seeking a dynamic role in electronics, electrical, electro-mechanical or communications engineering. He has a Bachelor of Engineering degree in Electronics and Communication from Sahyadri College of Engineering, Mangalore. His technical skills include networking essentials, C hardware, PLC, SCADA, microcontrollers, microprocessors, MATLAB, Xilinx, VLSI tools, ARM7 and embedded systems. He is proficient in English, Hindi, Kannada and Malayalam and has experience with projects in RFID security systems and embedded C programming.
A Literature Review on Effect of Machining Parameters in Wire - EDM
The recent upgradation of newer and harder materials has made the machining task in WEDM quite challenging. Thus for the optimum use of all the resources it is essential to make the optimum use of parameters to get the best output to increase the productivity. Advances in technology have impacted with an increased cutting speed and tight tolerances in WEDM. This paper reviews the various notable works in field of WEDM and magnifies on effect of machining parameters on MRR, kerf width and surface roughness.
OPTIMIZATION OF WIRE EDM PARAMETERS TO ACHIEVE A FINE SURFACE FINISH
Wire Cut Electric Discharge Machining process with a thin wire as an electrode transforms electrical energy to thermal
energy for cutting materials. WEDM is considered as a unique adoption of the conventional EDM process, which uses
an electrode to initialize the sparking process. However, WEDM utilizes a continuously travelling wire electrode made of
thin copper, brass or tungsten of diameter 0.05-0.30 mm, which is capable of achieving very small corner radii. The wire
is kept in tension using a mechanical tensioning device reducing the tendency of producing inaccurate parts. During
the WEDM process, the material is eroded ahead of the wire and there is no direct contact between the work piece and
the wire, eliminating the mechanical stresses during machining.
Parameter Optimization of Wire EDM in a Range of Thickness for EN8 Die Steel
Wire Electrical Discharge Machining (WEDM) is also known as an electro thermal production process in then, nor
electricity) allows the wire to cut through the metal by the use of heat from electrical sparks. The present work process approach
to parameter optimization in wire electric discharge machining of EN-8 die steel (of thickness 50 and 75mm) using Taguchi
method which optimizes four process parameters (factors) such as pulse ON time, pulse OFF time, current, voltage and two
important response such as material removal rate (MRR) and in surface roughness (Ra –average roughness) of machined
workpiece is considered in this study. Taguchi is an efficient search technique, is used to obtain the optimal setting of the desired
responses and to avoid the conflicting nature of response. Taguchi designs focus on reducing variability, as well as setting the mean to target.
Effect of Process Parameters on MRR for HCHCr in WEDM using RSM methodology
Effect of Process Parameters on MRR for HCHCr in WEDM using RSM methodologyInternational Journal of Advanced Engineering Research and Applications
Wire electrical discharge machining (WEDM) is a specialized thermal machining process
capable of accurately machining parts of hard materials with complex shapes. Response surface
methodology (RSM) with central composite design is selected for experimentation. In the present
work, four factors are taken as input parameters, and the effect of these parameters on MRR are
studied. The influence of the input parameters on response in WEDM process has been examined.
The input parameters are Pulse on time (Ton), Pulse off time (Toff), Servo voltage (SV) and peak
current (IP). The experiments have been performed on high chromium high carbon steel with a wire
of diameter 0.2 mm and the obtained data has been analyzed with the help of RSM using design
expert software. The work piece material was a high carbon high chromium (HCHCr) die steel with
excellent wear resistance, hot toughness and good thermal shock resistance. The experiments shows
that Pulse on time (Ton), Pulse off time (Toff), Servo voltage (SV) and peak current (IP) influence
MRR. Results show that machining speed increases with increase in the pulse on-time and the pulse
off-time increases as the number of discharges within given period of time decreases. Moreover,
there is not much influence of servo voltage on MRR and it increases very slightly with increase in
peak current. Also, as the Ton increases the MRR increases and as Toff increases MRR decreases.
This is because as Ton increases number of sparks per unit time increases and as Toff increases the
sparks per unit time decreases.Optimization of the Process Parameters of Wire Cut EDM - A Review
The objective of this paper is to study the effect of different process parameter of wire electrical discharge machine (WEDM) process on the performance measures such as material removal rate (MRR), surface roughness, dimensional accuracy and kerf width. It is necessary to evaluate the factors that affect the productivity and efficiency of WEDM process. It will directly contribute to increase cutting speed and dimensional accuracy.
OPTIMIZATIONS OF MACHINING PARAMETER IN WIRE EDM FOR 316L STAINLESS STEEL BY ...
WEDM is one of the non-traditional method used for the machining complex shape structure and components made up of hard material like composites and HSS. This is an experimental investigation of wire electro-discharge machining (WEDM) of 316L SS. The outstanding characteristics of stainless steel 316L such as their compatibility and noticeable physical, mechanical and biological performance has led to increased application of them in various industries especially in biomedical industries over the last 50 years.316L SS is used extensively for weldments where its immunity to carbide precipitation due to welding assures optimal corrosion resistance. There are some difficulties in machining of stainless steel by conventional machining. On the other hand, unconventional machining process especially Wire electrical discharge machining (WEDM) are more appropriate techniques for machining difficult to machine materials such as stainless steel.
Edm Wire Cut
This document discusses EDM/wire cut machining. EDM/wire cut uses an electrically charged wire to erode metal by applying an electrical current between the wire and the workpiece. This allows complex shapes to be cut with a high degree of accuracy in hard metals and other materials that are difficult to machine using traditional methods.
Edm wire cut presentation
EDM wire cut adalah proses memotong logam dengan cara mengalirkan arus elektrik tinggi melalui elektrod berbentuk dawai halus ke logam kerja, menghasilkan percikan elektrik yang melelehkan logam. Proses ini mampu memotong logam dengan ketepatan tinggi tanpa tekanan fizikal.
Edm Presentation
The document discusses the need for a centralized document imaging system at the Alaska Department of Health and Social Services. It notes that paperwork is central to their operations but current paper-based processes use up significant space, take a long time for retrieval, and make documents inaccessible or lose audit integrity. A document imaging system would save money through reduced space and personnel costs and allow documents to be retrieved and shared electronically without delay. It would also save time, provide better customer service through faster fulfillment of requests, and ensure legal and privacy compliance.
Electric discharge machining by shaikh mohd aslam
The document describes the electrical discharge machining (EDM) process. EDM involves using electrical sparks to erode material from a conductive workpiece. A tool shaped to the desired cavity or hole acts as an electrode and is placed near the workpiece in a dielectric fluid. High-frequency pulses of voltage are applied, causing sparks that melt and evaporate small amounts of material. The process is repeated until the cavity is shaped. Key aspects of EDM include the dielectric fluid, gap size, electrode material, and operating parameters which control the machining rate and surface finish.
More Related Content
What's hot
SEKHAR RESUME 2015 (10)
Chandra Sekhar Pinninti is seeking a career opportunity that utilizes his technical and analytical abilities. He has a B.Tech in ECE from Vignan's Institute of Information Technology with 74.6% marks. He has skills in languages like C and packages like MATLAB and PSPICE. He has participated in robotics competitions and presented papers at conferences. His academic project involved developing a Wi-Fi controlled robot with night vision camera. He is a quick learner with good technical knowledge and ability to work in teams.
sumeet
This curriculum vitae is for Mahale Sumeet Sanjay, who has a diploma in electronics and telecommunications from Guru Gobind Singh Polytechnics in Nashik. He is seeking a challenging position where he can apply his creativity, strong sense of responsibility, and perseverance. He has experience working as a trainee and junior engineer, and his education includes an SSC, HSC in electronics technology, and a diploma in electronics and telecommunications.
priyank resume1
Priyank Modi seeks to utilize his technical skills and competency to help organizations and individuals grow. He has a Bachelor of Engineering degree in Mechanical Engineering from Truba Institute of Engineering and Information Technology with a 7.8 CGPA. His areas of interest include thermodynamics, fluid mechanics, and he is proficient in the C programming language.
my cv
Abinash Thiruvan's curriculum vitae summarizes his objective, qualifications, experience, and skills. He has a Bachelor of Engineering in Mechanical Engineering from Anna University and topped subjects like Design of Machine Elements. His projects include designing an automatic vehicle signal system using sensors and a bowl pressure testing machine. Abinash is proficient in AutoCAD, Solidworks, and Microsoft Office applications. His areas of interest are in automobile, production, and industrial engineering. He declares the information provided is accurate and pledges loyal service if selected.
R2016 be extc syllabus even
This document provides information on the revised syllabus for Electronics and Telecommunication Engineering under the University of Mumbai's Faculty of Technology. It discusses the implementation of the Choice Based Credit and Grading System from the academic years 2016-2017 onwards. The preamble outlines the philosophy of outcome-based education and focus on continuous evaluation to enhance quality. It also details the credit assignment policy and grading system. The document then provides course details for the 8th semester, including the list of elective courses available.
Vinay new
This document is a resume for G. Vinay. It summarizes his objective, academic qualifications, skills, interests and experience. Vinay has a B.Tech in ECE from ASIT, Gudur in 2016. He is proficient in programming languages like C and software like MATLAB. His areas of interest are electronic devices and circuit analysis. He has participated in various college competitions and activities. His academic project involved pan sharpening of satellite images using non-subsampled contourlet transformation in MATLAB.
anmol cv 1
Anmol Ranjan Srivastava's curriculum vitae provides information about his objective, academic and professional qualifications, training, computer skills, seminars attended, awards received, personal strengths, and contact details. His objective is to utilize his educational and professional skills in a challenging position to boost his professional growth. He has a B.Tech in Mechanical Engineering with over 72% aggregate and has received training in industrial programs. His personal strengths include good communication skills, willingness to learn, and being optimistic.
Manjunath Resume
K.S. Manjunath is seeking a suitable career opportunity in an esteemed organization. He is currently pursuing his Bachelor of Engineering in Electronics and Communication engineering from Sri Shanmugha College of Engineering and Technology, affiliated with Anna University, Chennai with an 8.146 CGPA. He has completed certifications in Embedded Systems and Web Technology. His technical skills include Embedded C, C language, and ASP.NET. He is interested in digital electronics and has completed a mini project on preventing vehicle theft using embedded systems. He has also participated in seminars and workshops on related topics.
Muhammad yousaf resume (january 2016)
Muhammad Yousaf has a B.Sc in Chemical Engineering from the University of Engineering and Technology Lahore with a GPA of 3.26. He has experience interning at a cement plant and an auto parts manufacturer where he analyzed processes and recommended improvements. Yousaf held leadership roles as the lead committee member of the largest event management society at his university, organizing events for over 250 attendees. He has received multiple academic scholarships and awards for his achievements.
Mmmec brochure
This document provides information about Madan Mohan Malaviya Engineering College, which is celebrating its 50th anniversary. It discusses the college's vision, principal's message, departments, research work, facilities, and past recruiting companies. The college was established in 1962 and has six departments covering engineering, science, and management. It aims to provide quality education and develop students into excellent professionals.
EKTA TEACHING
Ekata P Patil has 3 months of teaching experience and seeks a career opportunity to fully explore her potential. She has a Master's degree in VLSI and Embedded Systems from BVCOEW, Pune in 2015 and a Bachelor's degree in Electronics and Telecommunications from JTMCOE, Faizpur in 2013. Her projects include a microcontroller-based portable data logger for medical applications and a PIR sensor-based human detection system. She has technical skills in programming languages like VHDL, Verilog, and C and software like Matlab, Latex, Xilinx, and Modelsim.
Shafeek-Resume
Shafeek Ahamad is seeking a dynamic role in electronics, electrical, electro-mechanical or communications engineering. He has a Bachelor of Engineering degree in Electronics and Communication from Sahyadri College of Engineering, Mangalore. His technical skills include networking essentials, C hardware, PLC, SCADA, microcontrollers, microprocessors, MATLAB, Xilinx, VLSI tools, ARM7 and embedded systems. He is proficient in English, Hindi, Kannada and Malayalam and has experience with projects in RFID security systems and embedded C programming.
What's hot (12)
Viewers also liked
A Literature Review on Effect of Machining Parameters in Wire - EDM
The recent upgradation of newer and harder materials has made the machining task in WEDM quite challenging. Thus for the optimum use of all the resources it is essential to make the optimum use of parameters to get the best output to increase the productivity. Advances in technology have impacted with an increased cutting speed and tight tolerances in WEDM. This paper reviews the various notable works in field of WEDM and magnifies on effect of machining parameters on MRR, kerf width and surface roughness.
OPTIMIZATION OF WIRE EDM PARAMETERS TO ACHIEVE A FINE SURFACE FINISH
Wire Cut Electric Discharge Machining process with a thin wire as an electrode transforms electrical energy to thermal
energy for cutting materials. WEDM is considered as a unique adoption of the conventional EDM process, which uses
an electrode to initialize the sparking process. However, WEDM utilizes a continuously travelling wire electrode made of
thin copper, brass or tungsten of diameter 0.05-0.30 mm, which is capable of achieving very small corner radii. The wire
is kept in tension using a mechanical tensioning device reducing the tendency of producing inaccurate parts. During
the WEDM process, the material is eroded ahead of the wire and there is no direct contact between the work piece and
the wire, eliminating the mechanical stresses during machining.
Parameter Optimization of Wire EDM in a Range of Thickness for EN8 Die Steel
Wire Electrical Discharge Machining (WEDM) is also known as an electro thermal production process in then, nor
electricity) allows the wire to cut through the metal by the use of heat from electrical sparks. The present work process approach
to parameter optimization in wire electric discharge machining of EN-8 die steel (of thickness 50 and 75mm) using Taguchi
method which optimizes four process parameters (factors) such as pulse ON time, pulse OFF time, current, voltage and two
important response such as material removal rate (MRR) and in surface roughness (Ra –average roughness) of machined
workpiece is considered in this study. Taguchi is an efficient search technique, is used to obtain the optimal setting of the desired
responses and to avoid the conflicting nature of response. Taguchi designs focus on reducing variability, as well as setting the mean to target.
Effect of Process Parameters on MRR for HCHCr in WEDM using RSM methodology
Effect of Process Parameters on MRR for HCHCr in WEDM using RSM methodologyInternational Journal of Advanced Engineering Research and Applications
Wire electrical discharge machining (WEDM) is a specialized thermal machining process
capable of accurately machining parts of hard materials with complex shapes. Response surface
methodology (RSM) with central composite design is selected for experimentation. In the present
work, four factors are taken as input parameters, and the effect of these parameters on MRR are
studied. The influence of the input parameters on response in WEDM process has been examined.
The input parameters are Pulse on time (Ton), Pulse off time (Toff), Servo voltage (SV) and peak
current (IP). The experiments have been performed on high chromium high carbon steel with a wire
of diameter 0.2 mm and the obtained data has been analyzed with the help of RSM using design
expert software. The work piece material was a high carbon high chromium (HCHCr) die steel with
excellent wear resistance, hot toughness and good thermal shock resistance. The experiments shows
that Pulse on time (Ton), Pulse off time (Toff), Servo voltage (SV) and peak current (IP) influence
MRR. Results show that machining speed increases with increase in the pulse on-time and the pulse
off-time increases as the number of discharges within given period of time decreases. Moreover,
there is not much influence of servo voltage on MRR and it increases very slightly with increase in
peak current. Also, as the Ton increases the MRR increases and as Toff increases MRR decreases.
This is because as Ton increases number of sparks per unit time increases and as Toff increases the
sparks per unit time decreases.Optimization of the Process Parameters of Wire Cut EDM - A Review
The objective of this paper is to study the effect of different process parameter of wire electrical discharge machine (WEDM) process on the performance measures such as material removal rate (MRR), surface roughness, dimensional accuracy and kerf width. It is necessary to evaluate the factors that affect the productivity and efficiency of WEDM process. It will directly contribute to increase cutting speed and dimensional accuracy.
OPTIMIZATIONS OF MACHINING PARAMETER IN WIRE EDM FOR 316L STAINLESS STEEL BY ...
WEDM is one of the non-traditional method used for the machining complex shape structure and components made up of hard material like composites and HSS. This is an experimental investigation of wire electro-discharge machining (WEDM) of 316L SS. The outstanding characteristics of stainless steel 316L such as their compatibility and noticeable physical, mechanical and biological performance has led to increased application of them in various industries especially in biomedical industries over the last 50 years.316L SS is used extensively for weldments where its immunity to carbide precipitation due to welding assures optimal corrosion resistance. There are some difficulties in machining of stainless steel by conventional machining. On the other hand, unconventional machining process especially Wire electrical discharge machining (WEDM) are more appropriate techniques for machining difficult to machine materials such as stainless steel.
Edm Wire Cut
This document discusses EDM/wire cut machining. EDM/wire cut uses an electrically charged wire to erode metal by applying an electrical current between the wire and the workpiece. This allows complex shapes to be cut with a high degree of accuracy in hard metals and other materials that are difficult to machine using traditional methods.
Edm wire cut presentation
EDM wire cut adalah proses memotong logam dengan cara mengalirkan arus elektrik tinggi melalui elektrod berbentuk dawai halus ke logam kerja, menghasilkan percikan elektrik yang melelehkan logam. Proses ini mampu memotong logam dengan ketepatan tinggi tanpa tekanan fizikal.
Edm Presentation
The document discusses the need for a centralized document imaging system at the Alaska Department of Health and Social Services. It notes that paperwork is central to their operations but current paper-based processes use up significant space, take a long time for retrieval, and make documents inaccessible or lose audit integrity. A document imaging system would save money through reduced space and personnel costs and allow documents to be retrieved and shared electronically without delay. It would also save time, provide better customer service through faster fulfillment of requests, and ensure legal and privacy compliance.
Electric discharge machining by shaikh mohd aslam
The document describes the electrical discharge machining (EDM) process. EDM involves using electrical sparks to erode material from a conductive workpiece. A tool shaped to the desired cavity or hole acts as an electrode and is placed near the workpiece in a dielectric fluid. High-frequency pulses of voltage are applied, causing sparks that melt and evaporate small amounts of material. The process is repeated until the cavity is shaped. Key aspects of EDM include the dielectric fluid, gap size, electrode material, and operating parameters which control the machining rate and surface finish.
EDM wirecut report
The document provides information about wire electrical discharge machining (EDM). It discusses how wire EDM works by using a thin wire fed through the workpiece to cut complex shapes. The document outlines the objectives, scope, safety precautions, and standard operating procedure for a project using a Mitsubishi wire EDM machine to cut a mild steel workpiece. It also analyzes the output part and discusses advantages and disadvantages of wire EDM.
Edm
Electrical discharge machining (EDM) is a non-traditional machining process that uses electrical sparks to remove metal. The document discusses the history and development of EDM, including key components like the electrode, workpiece, dielectric fluid, and power supply. It describes the basic EDM process and different EDM methods like conventional EDM, wire EDM, and hole drilling EDM. The document also covers EDM applications, innovations like dry EDM and powder-mixed EDM, and concludes with a list of references.
NON TRADITIONAL MACHINING & MATERIAL ADDITION PROCESS ( as per MGU syllabus)
Nontraditional machining: EDM, ECM, USM, EBM,
LBM, IBM, Abrasive water jet machining (principle, process parameters, material
removal mechanism, MRR, surface roughness, HAZ and applications) – Material
addition process:- stereo-lithography, selective laser sintering, fused deposition
modeling, laminated object manufacturing, laser engineered net-shaping, laser welding,
LIGA process.
Seminar report on electric discharge machine
This document provides a seminar report on electric discharge machining (EDM) by Ankit Amlan, a 7th semester mechanical engineering student at VSSUT, Burla. The report details EDM work done by Amlan at Hindustan Aeronautics Limited in Sunabeda. It covers the history of EDM, working principles, material removal mechanisms, types of EDM including sinker and wire-cut, applications, and advantages/disadvantages. Pictures and diagrams are included to illustrate EDM systems and processes.
Future challenges in computer science
Computer science is faced with many challenges as the digital universe expands. From mobile and cloud computing to data security, addressing these issues can require large, structural changes, but an examination of these problems can lead to organizational solutions and improvements in the world.
ELECTRIC DISCHARGE MACHINING
EDM is an electrical discharge machining process that uses electrical sparks to erode materials to shape and cut electrically conductive materials, even very hard metals. It has various applications in industries like molds, dies, aerospace where complex shapes are required. While EDM allows machining hard metals and complex shapes, it has slow material removal rates and high power consumption compared to traditional machining.
Multiple Optimization of Wire EDM Machining Parameters Using Grey Based Taguc...
Wire EDM is a non conventional machining process, which is used when the precision is prime importance. Multiple optimization (Grey based Taguchi) technique is used to find out the optimum machining setup for input parameter. This paper investigate the optimal set of process parameter such as Ton, Toff, Wp, Wf in wire EDM machining process to find out the variation in two output parameter such as material removal rate (MRR), and surface roughness (Ra) on material high chromium high carbon steel (HCHCr) using wire Brass/super alloy (coated).Experimentation was conducted on orthogonal array L-9 based on DOE. Analysis of experiment has been carried out using GRA. All the experimental data are fed into Minitab software, through which various tables, graphs & optimum values are obtained. The experimental result reveals that the optimum setting of input parameters significantly improves Wire EDM process.
SlideShare 101
The SlideShare 101 is a quick start guide if you want to walk through the main features that the platform offers. This will keep getting updated as new features are launched.
The SlideShare 101 replaces the earlier "SlideShare Quick Tour".
2015 Upload Campaigns Calendar - SlideShare
Each month, join us as we highlight and discuss hot topics ranging from the future of higher education to wearable technology, best productivity hacks and secrets to hiring top talent. Upload your SlideShares, and share your expertise with the world!
What to Upload to SlideShare
Not sure what to share on SlideShare?
SlideShares that inform, inspire and educate attract the most views. Beyond that, ideas for what you can upload are limitless. We’ve selected a few popular examples to get your creative juices flowing.
Viewers also liked (20)
A Literature Review on Effect of Machining Parameters in Wire - EDM
A Literature Review on Effect of Machining Parameters in Wire - EDM
OPTIMIZATION OF WIRE EDM PARAMETERS TO ACHIEVE A FINE SURFACE FINISH
OPTIMIZATION OF WIRE EDM PARAMETERS TO ACHIEVE A FINE SURFACE FINISH
Parameter Optimization of Wire EDM in a Range of Thickness for EN8 Die Steel
Parameter Optimization of Wire EDM in a Range of Thickness for EN8 Die Steel
Effect of Process Parameters on MRR for HCHCr in WEDM using RSM methodology
Effect of Process Parameters on MRR for HCHCr in WEDM using RSM methodology
Optimization of the Process Parameters of Wire Cut EDM - A Review
Optimization of the Process Parameters of Wire Cut EDM - A Review
OPTIMIZATIONS OF MACHINING PARAMETER IN WIRE EDM FOR 316L STAINLESS STEEL BY ...
OPTIMIZATIONS OF MACHINING PARAMETER IN WIRE EDM FOR 316L STAINLESS STEEL BY ...
NON TRADITIONAL MACHINING & MATERIAL ADDITION PROCESS ( as per MGU syllabus)
NON TRADITIONAL MACHINING & MATERIAL ADDITION PROCESS ( as per MGU syllabus)
Multiple Optimization of Wire EDM Machining Parameters Using Grey Based Taguc...
Multiple Optimization of Wire EDM Machining Parameters Using Grey Based Taguc...
Similar to SULTHANA PARVIN
resume1
Rajesh Ramdev is seeking a career opportunity in an organization that offers learning and growth. He has a BE in Electrical and Electronics Engineering from Velammal College of Engineering & Technology with a CGPA of 9.01. He has experience with programming languages like C and C++. His areas of interest include high voltage engineering. He has participated in projects, paper presentations, industrial visits, and in-plant trainings. He is a voluntary blood donor and member of an NGO. He has won prizes for paper presentations, technical quizzes, and project presentations. His personal traits include being adaptable, confident, and punctual.
New Vikrant Resume 2 (1)
Vikrant Kumar is seeking a challenging job to enhance his technical skills in electronics and wireless communication. He holds a B.Tech degree in Electronics and Communication Engineering from Delhi College of Technology & Management with 73% marks. He has experience with Microsoft Office, C, Protious Software, Mat Lab, and Xilinx Software. He has completed projects on traffic control lights, LED light counters, and mobile chargers. Vikrant has also done a 2-month summer training at Husk Power Systems where he worked on prepaid meters and solar troubleshooting.
Anburaj Resume-2
V. Anburaj has provided his resume which includes his contact information, education history, skills, projects and strengths. He received his B.E. in Electronics and Communication Engineering from KLN College of Information Technology in 2014, and his diploma in Electrical and Electronics Engineering from Tamilnadu Polytechnic College in 2010. His elective subjects include embedded system programming, wireless communication and electronic devices and circuits. He is proficient in C, C++, Core Java and MS Office software. His hobbies include playing cricket and listening to music.
resume (1) (1)
Venkatesh Kristipati is seeking an entry level position in electrical and electronics engineering. He has a bachelor's degree in electrical and electronics engineering from JNTU Kakinada. He has knowledge of power generation, transmission, and distribution. He is interested in the latest electric technologies and has excellent academic performance. He has technical skills in Matlab Simulink and PSpice. He led a student project to design a low-cost, high-efficiency onboard battery charger for electric vehicles.
KAZI Mubin (E&TC) Reliance resum FEB 2015
Mubinhusen B. Kazi is seeking a progressive career in electronics and telecommunications. He has a M.Tech in Engineering (E&TC) from Dharmsinh Desai University. He has over 5 years of experience working as a Project Engineer for Wireless Teleinfra Pvt. Ltd. on projects related to 4G network installation and testing. He has strong technical skills in areas like RF surveying, network installation and commissioning. He also has teaching experience as a Lecturer in Electrical and Electronics departments.
Resume_suci
This document is a resume for M. Suchitra summarizing her education and experience. She completed a B.E. in Electronics and Communication Engineering in 2015 from Saranathan College of Engineering with a 7.36 CGPA. She has proficiency in languages like C and Java and operating systems like Windows. She has participated in projects involving solar based lift controllers and efficient communication protocols for wireless sensor networks. Her fields of interest include digital electronics, microprocessors and microcontrollers.
LE 406 RESUME
Sykam.Naga Malleswari is seeking a career opportunity in a professional and caring organization. She has a B.Tech in electronics and communication engineering from Sri Vasavi Institute of Engineering & Technology with 79.79% marks. She has technical skills in programming languages like Java and packages like MS Office and MATLAB. Her projects include an intercom system for her mini project and a passenger bus alert system for the blind for her B.Tech project. She has received achievements like the Prathibha award at the district level and was topper of her diploma college. She also participated in various sports and seminars.
prathi resume (1)
Pradheepa N provides her curriculum vitae, including her contact information, career objective, work experience, academic qualifications, software skills, technical skills, areas of interest, co-curricular activities, extra-curricular activities, and personal details. She has a bachelor's degree in electrical and electronics engineering and over 2 years of work experience as a media executive. Her skills include web design, multimedia, and online activities.
brrindha
Brrindha.A is seeking a job in a globally competitive environment that offers professional growth. She has a B.E. in Electronics and Communication Engineering from Sri Venkateswara Anna University with an 8.26 CGPA. Her skills include Microsoft Office, PSPICE, MATLAB, C and C++. She has experience in wireless communication, digital electronics and VLSI. Brrindha.A completed in-plant training at C-DOT and HCL and was selected for BSNL's employability enhancement program. She has participated in workshops on topics such as Arduino, 4G wireless, e-waste and Android development. For her project on software defined radio, she received Rs.
sagar kr singh ccn
Sagar Kumar Singh is seeking a challenging position that allows him to utilize his skills and learn new technologies. He has a Bachelor of Engineering degree in Electronics and Communication Engineering from SDMCET in Dharwad. His technical skills include C, Verilog-HDL, Matlab, and Cadence. For his major project he developed an efficient FIR filter design approach using Frequency Response Masking. He has participated in workshops and competitions, winning first prize in a technical event. He completed internships with East Central Railway and BSNL.
Resume
Riyaz Quraishi is seeking a career opportunity in an environmentally focused organization. He has a Bachelor's degree in Mechatronics from Chhatrapati Shivaji Institute of Technology with 68.90% aggregate. He has skills in Creo, microcontrollers, embedded systems, C, PLC, CNC and MATLAB. His major project involved designing a compressed air engine for two wheelers. He has participated in various workshops, training programs, and extracurricular activities. His areas of interest include aptitude, general knowledge, operations research and mathematics.
my resume
Purnima Parida is seeking a position where she can contribute her skills and grow professionally. She has a B.Tech in Electronics and Telecommunication Engineering from BPUT DRIEMS with 7.19 CGPA. She has experience with languages like C, C++, and ASP.NET. She participated in college competitions and technical tests, achieving second position in collage making and third in an electronics aptitude test. Her project involved image processing using DCT and DWT techniques.
Vaishali_verma_CV (1).pdf
Vaishali Heeralal Verma seeks a challenging position to utilize her skills and knowledge to help achieve company goals. She has a Bachelor's degree in Electronics and Communication Engineering with a 7.77 CGPA. Her technical skills include Microsoft Windows, electronics devices and circuits, and programming languages C and C++. She has experience with industrial training in signal and telecommunications and academic projects involving robots. Her strengths include working effectively individually or in teams, strong interpersonal skills, and adaptability.
Mariam Fayez
Mariam Fayez Boules Guirguis is an Egyptian communications and electronics engineer seeking to build her career profile. She holds a Bachelor's Degree in Communications & Electronics Engineering from Alexandria University and has experience in customer care and wireless technology training. Her skills include wireless networks operation, mobile generations, wireless planning and optimization, and software defined radio. She is fluent in English and has technical skills in tools like Packet Tracer, Embedded C, LabVIEW, and MATLAB.
DidTU
This resume summarizes the qualifications and experience of Didtu M G, a mechanical engineering graduate seeking a career in production activities. Key details include:
- Completed a BE in Mechanical Engineering from PPG Institute of Technology in 2016 with 74% marks. Also holds an HSC with 81.91% marks and SSLC with 82% marks.
- Proficient with ANSYS, CREO, MS Office, and Windows operating systems. Academic strengths include manufacturing and production.
- Areas of interest are thermal engineering and automobile engineering. Has participated in internships, workshops, and scored 14.25 in GATE 2016.
- Completed academic projects on designing a pneumatic punching machine and using friction stir welding on
thiru CV jan 2017
Thirupathi Sunkanapelli is seeking an opportunity to apply his knowledge and enhance his skills. He has a B.Tech in Electrical and Electronics Engineering with 74.6% aggregate from Gokaraju Rangaraju Institute of Engineering and Technology. He has over 1 year of work experience as a graduate engineer trainee and currently teaches electrical engineering subjects to B.Tech and polytechnic students. His areas of expertise include electrical circuits, measurements, power electronics, power systems analysis and protection. He has also completed internships in manufacturing of turbo generators and in automation, and B.Tech projects in transformer protection.
maharshi new resume
1. Maharshi J. Mehta is seeking a position as an engineer where he can learn and help the organization grow.
2. He has a BE in Electrical Engineering and has experience with projects involving smart energy meters, wireless speed control of steppers motors, and more.
3. His experience includes industrial training at Electrotherm and visits to various industrial sites, and he is proficient in MATLAB, C programming, and Microsoft Office.
gobi resume new
This resume is for Gobinath M who has an M.Tech in Electrical Engineering from Christ College of Engineering and Technology. He has a B.Tech in Electrical and Electronics Engineering from Dr.SJS Paul’s memorial College of Engineering & Technology. He is seeking a challenging career where he can apply his knowledge and skills. His areas of interest are electronics and electrical machines. He has strengths in leadership, adaptability, and teamwork. He has experience with software like MS Office and MATLAB.
RESUME FOR CORE
Karthik C is seeking a role as a Technical Solution Provider to gain experience working with a team. He has a B.E in Electronics and Instrumentation from Sethu Institute of Technology with a percentage of 67.3% in 2016. His areas of interest include Networking, Electronics, Hardware Communication and he has undergone a 3 month skill development program in Embien Technologies. He is proficient in technical skills like network basics, router concepts and network troubleshooting. Karthik completed an academic project titled "Automated Quality Based Void Detector" using a microcontroller, electric drives and embedded software.
Muntazar-Hussain-Jamali-CV..
Muntazar Hussain Jamali is seeking an entry-level position where he can utilize his skills and knowledge. He received a Bachelor of Engineering in Electrical Engineering from Mehran University of Engineering and Technology in 2015. He has skills in MS Office, MATLAB, ETAP, leadership, and time management. Jamali completed internships at a 500kV grid station and thermal power plant. He has participated in numerous technical sessions, workshops, and conferences related to electrical engineering topics. His research includes generating electricity from speed breakers and reducing distribution losses.
Similar to SULTHANA PARVIN (20)
SULTHANA PARVIN
- 1. SULTHANA PARVIN.A 16, ansari nagar 2nd cross street, Mahaboobpalayam, Madurai. Mobile: +917867919689. E-mail: sulthana.api@gmail.com CAREER OBJECTIVE: To secure a promising position those offers a challenging environment and provide good opportunity for serving the society. ACADEMIC QUALIFICATIONS: Course Institution Year of passing Marks in % or CGPA B.E(Electrical and electronics engineering) Velammal college of engineering and technology,Madurai. 2016(pursuing) 8.7 Higher Secondary Course Capron hall higher secondary school for girls,Madurai. 2012 89 Secondary School Leaving Certificate Capron hall higher secondary school for girls,Madurai. 2010 96 ADDITIONAL INFORMATION: Programming languages: c,c++ Area of interest: Transmission and distribution. Other certifications: Business English Certificate by Cambridge university. (grade c) CO-CURRICULAR ACTIVITIES: Workshops: Attended one day workshop on “WIRECUT-EDM” on 20th February 2015 at Madras institute of technology,Chennai. Attended one day workshop on “WINDING AND ELECTRICAL SAFETY” on 4th March 2013 at velammal college of engineering and technology,Madurai. Projects: Mini project: Rain alarm.
- 2. Paper presentation: Presented a paper on “NANOBOTS-ARTIFICIAL BLOOD” organized by kamaraj college of engineering, virudunagar on 21st February 2014. Presented a paper on “SUPER CAPACITORS” at SANUS’14 organized by SNS college of engineering, Coimbatore on 14th August 2014. Industrial visit: Visited TNEB substation during 2015 at paikkara,Madurai. In-plant training: Attended a week in-plant training at BSNL, Madurai during 2013. Attended a week in-plant training at RAILWAYS, Madurai during 2014. EXTRA CURRICULAR ACTIVITIES: Good at essay writing. ACHIEVEMENTS: Won a cash award of five hundred rupees for full attendance during 2012. Won silver medal for academic excellence during X standard. PERSONALITY TRAITS: Flexible. Time management. WEB PRESENCE: Linkedin (ID:sulthana.api@gmail.com, profile name: Sulthana Parvin) PERSONAL DETAILS: Date of birth: 5th August, 1995. Father’s name: A. Allapitchai. Hobbies: Collecting coins. Languages known: Tamil (read,write,speak) English (read, write, speak) Arabic (read). Date: Place: A.SULTHANA PARVIN.