Steel Strut Channels,Brackets and Cantilevers Profiles
Laying cable trunking is one of the most expensive items for industrial electric plant fitters. This issue led to the creation of alternative Fixing Structures aiming fitting simplicity and quickness. So Teknomega looked for innovative solutions whose purpose was to give more and more flexible answers to the needs of modern plant engineering.
Today, still, Fastening Systems are not adequately held in consideration in industrial plant engineering. Their huge impact in terms of costs is weighted only at works ended, when it is too late to fix the problem. When proven specialists are called in during design, there are no improvised and unlikely fastenings, often built without a specific technical knowledge.
Specialists such as Teknomega can guide the installer towards more efficient solutions, such as those proposed by the "Ω STRUT" family.
This range consists in a series of complementary products: profiles (channels), various types of cantilevers and connection brackets which, almost like a "Meccano", create truly quick and safe fastening structures. Another peculiarity of the "Ω STRUT" range, is the great versatility of its accessories, such as collars, threaded rods, and chains, which can be fitted both on concrete carrying structures and on metal beams.
STRUT Steel Channels
Steel Cantilevers Arms
Steel Brackets
Brackets with pre-mounted m10 bolts
Strut accessories
Visit Teknomega website at www.teknomega.com to download the adjourned Fastening Solution Catalogues.
This document provides details about the AGR 237: Wildlife Biology course. The course covers topics like definitions of wildlife terms, justifications for wildlife conservation, status and distribution of wildlife in India, wildlife ecology, management, damage control, census methods, protected areas, and conservation strategies. Students will learn about the importance of wildlife, status of rare and endangered species, biodiversity, environmental protection, and the need for wildlife conservation. The course uses two textbooks and meets for one lecture per week.
A presentation given after being requested by one of the children at Popcorn House, Langs Cambridge Ontario. Light and Informative. Lots of moving pictures.
Système de Fixation en Acier Ω STRUT
Profils, pattes et consoles de fixation STRUT Pour être vraiment complète, la gamme dédiée aux structures de fixation doit inclure un riche éventail de produits synergiques entre eux, comme la série Ω STRUT : profils, consoles et pattes de fixation en acier.
Les profils en acier Ω STRUT permettent de réaliser n’importe quel type de support (consoles, berceaux, supports à plusieurs étages, etc.) pour suspendre des systèmes électriques, mécaniques, hydrauliques, etc.
Les consoles en acier Ω STRUT, robustes et avec plaque soudée, répondent aux exigences d'installation et de soutien pour les conduits, les chemins de câbles, les tubes, les conduits d'air, etc., en garantissant une longue durée.
Enfin, les Pattes de fixation Ω STRUT sont l’élément de jonction entres les profils ou avec les structures. Les pattes de fixation en acier pour profils, fournies avec les vis et les écrous référencés dans le catalogue, permettent de construire, directement sur place, une structure plus adaptée aux besoins de l’installation.
Principaux avantages des structures de fixation STRUT :
- Montage rapide et économique: il est possible de créer directement sur le chantier la solution idéale pour l’installation de vos systèmes ou des composants des systèmes.
- Mode d’emploi: les structures de fixation Ω STRUT se coupent avec une petite scie ou une scie à onglet, et s’assemblent avec une clé anglaise pour serrer la boulonnerie de fixation.
- Sécurité et Fiabilité: il est facile de dimensionner correctement le support à utiliser, en connaissant les charges de portée spécifiques à soutenir. Ils sont déclarés pour toutes les structures de fixation Ω STRUT.
- Vaste Gamme: Profils Ω STRUT en forme de "C" ou double "C" avec bords repliés
Caractéristiques
- Dimensions: 41x21 et 41x41
- Épaisseurs: 1,5 et 2,5 mm
- Longueurs Standard en stock: 3 m et 4 m
- Type de profil: Plein - Troué
- Finition/Zingage: électrolytique (S) - à chaud (Z)
Profils Ω STRUT sur demande :
Longueur: 2 m et 6 m
Finition: Acier Inox
Profils en Acier Ω STRUT
Parcourez les différents éléments en acier structuraux: structures de fixation avec caractéristiques et utilisation différentes mais synergiques entre elles.
Profils en acier STRUT Consoles en acier Pattes de fixation plates en acier zingués
Pattes de fixation en acier boulon pré-assemblé Accessoires pour profils, consoles et pattes de fixation Strut
www.teknomega.fr
Juntas en Trenza de Cobre Aisladas Ω LINK
http://www.teknomega.es/departamento-paneles/juntas-aisladas-o-link
Ω LINK es una Conexión Prefabricada, Flexible, realizada en trenza estañada de cobre, revestida con aislamiento en PVC, lista para el uso.
VENTAJAS Y PRESTACIONES JUNTAS TRENZA DE COBRE:
file n° E300607 (approval pending)
Ω LINK es la solución más rápida y conveniente para realizar Conexiones Eléctricas de 125 a 630 A.
Los terminales de la conexión está realizados con un tubo de cobre estañado y prensado. Su dimensión está ideada de acuerdo con los polos de los interruptores en forma de caja, de major difusión en el mercado, permitiendo obtener el mejor contacto eléctrico posible.
El diámetro de los agujeros permite: de un lado la optimización del contacto eléctrico, de acuerdo con el polo del interruptor y de la otra extremidad, la posibilidad de una conexión universal con sistemas de distribución en barras.
El Aislamiento, realizado en PVC, satisface todas las características eléctricas requeridas para un empleo en B.T.
La temperatura máxima de funcionamiento continuoes de 105° C.
La mejor alternativa a las conexiones cableadas y a las barras flexibles
VENTAJAS
Conexiónes listas para el uso: no se requiere ninguna operación preventiva
• Suma flexibilidad comparada con un cable de sección análoga
• Reducción de los estorbos en el interior del cuadro
• Reducción del peso
• Gran ahorro de tiempo
• Ningún cable de cortar a medida
• Ninguna peladura de las extremidades en el cable o en el bar
• Ningún terminal de cable necesario
• Ninguna operación de encaste o de perforación
EXCELENTES PARÁMETROS ELÉCTRICOS
• Óptimo aislamiento eléctrico
• Mejor superficie de contacto
Verbindungsstücke aus Isoliertem Kupfergeflecht Ω LINK
http://www.teknomega.de/bereich-schaltanlagen/isolierte-verbindungsstuecke-o-link
Ω LINK ist eine Vorgefertigte, Verbindung, aus verzinntem Kupfergeflecht, mit PVC-Isolierung.
VORTEILE UND LEISTUNGEN DER VERBINDUNGSSTÜCKE AUS KUPFERGEFLECHT:
file n° E300607 (approval pending)
Ω LINK ist die schnellste und günstigste Lösung zur Verwirklichung elektrischer Verbindungen von 125 bis 630 A.
Die Anschlüssklemmen sind aus verzinntem, gepresstem Kupferrohr. Die Abmessungen entsprechen den Anschlüssen der üblicherweise verwendeten Leistungsschalter, für ein bestmögliche elektr. Kontaktierung.
Der Durchmesser der Bohrungen ermöglicht einerseits die Optimierung des elektrischen Kontakts entsprechend den Polen dei Leistungsschalter, andererseits die Möglichkeit eines Universalanschlusses für Verteilersysteme in Form von Schienen.
Die Isolierung aus PVC, erfüllt alle geforderten, elektrischen Eigenschaften für den Einsatz in B.T.
Die maximale Dauerbetriebstemperatur beträgt 105° C
Die beste Alternative zu Kabelanschlüssen und isolierte Schienen
VORTEILE
Gebrauchsfertige Verbindungen:
• Extreme flexibel im Vergleich mit einem Kabel bei gleichem Querschnitt
• Platzersparnis im inneren der Schalttafel
• Gewichtreduzierung
• Grosse Zeitersparnis
• Kein Kabel, das auf eine bestimmte Länge zugeschnitten werden muss
• Kein Abisolieren
• Kein Kabelschub erforderlich
• Kein Crimpen oder Bohren notwendig
EXZELLENTE ELEKTRISCHE EIGENSCHAFTEN
• Optimale elektrische Isolierung
• Optimale Kontaktoberfläche
• Bessere Stromtransportfähigkeit bei gleichem Querschnitt im Vergleich zu einem Kabel und/oder reduzierter Querschnitt bei gleiche Strom
• Reduzierte Erwärmung
• Exzellentes Verhalten bei Kurzschluss
PRODUKTPALETTE
• Querschnitte: von 25 mm2 bis 240 mm2
• Längen: von 230 mm bis 930 mm
• Nominaler Stromdurchfluss: von 125 A bis 630 A
Joints Isolés en Tresse de Cuivre Ω LINK
http://www.teknomega.fr/section-tableaux-electriques/joints-isoles-o-link
Ω LINK est une Connexion Flexible Préfabriquée prête à servir, réalisée en tresse de cuivre étamée et revêtue d'un isolant en PVC.
AVANTAGES ET PERFORMANCES DES JOINTS EN TRESSE DE CUIVRE:
file n° E300607 (approval pending)
Ω LINK est la solution la plus rapide et pratique pour la réalisation de connexions électriques de 125 à 630 A.
Les bornes de la connexion sont réalisées à partir d'un tube de cuivre étamé pressé. Leurs dimensions sont étudiées en fonction des pôles des disjoncteurs les plus répandus sur le marché, ce qui permet d'avoir le meilleur contact électrique possible.
Le diamètre des trous permet d'un côté d'optimiser le contact électrique en fonction du pôle de l'interrupteur; sur l'autre extrémité, la possibilité d'une connexion universelle à des systèmes de distribution à barres.
L’Isolation en PVC satisfait toutes les caractéristiques électriques requises pour une utilisation en Basse Tension.
La température de service continue maximum est de 105° C.
La meilleure alternative aux connexions en câble
AVANTAGES
Connexions prêtes à servir: aucune opération préventive n'est requise
• Extrême flexibilité par rapport à un câble de même section
• Réduction des encombrements à l'intérieur du tableau
• Réduction de poids
• Forte économie de temps
• Aucun câble à couper à la mesure
• Aucun dénudage de têtes du câble ou de la barre souple
• Pas besoin d'acheter de cosses
• Pas besoin de sertissage ou forage
EXCELLENTES PARAMÈTRES ÉLECTRIQUES
• Excellente isolation électrique
• Meilleure surface de contact
• Meilleure ampacité à section égale par rapport à un câble et/ou à une section réduite à parité de courant nominal
• Echauffement réduit du fait de l'absence de connexions serties et de la meilleure ampacité
• Excellente résistance aux court-circuit
GAMME
• Sections: de 25 mm2 à 240 mm2
• Longueurs: de 230 mm à 930 mm
• Ampacité nominale: de 125 A à 630 A
Giunti in Treccia di Rame Isolati Ω LINK
http://www.teknomega.it/cablaggio-quadri-elettrici/connessione-elettrica-flessibile-isolata
Ω LINK è una ConnessionePrefabbricata Flessibile, realizzata in treccia di rame stagnata, rivestita con isolamento in PVC, pronta all'uso.
VANTAGGI E PRESTAZIONI GIUNTI IN TRECCIA DI RAME ISOLATI:
file n° E300607 (approval pending)
Ω LINK è la soluzione più rapida e conveniente per realizzare Connessioni Elettriche da 125 a 630 A.
I terminali della connessione sono realizzati con un tubo di rame stagnato, pressato. La loro dimensione è studiata in ragione dei poli degli interruttori scatolati di maggior diffusione nel mercato, consentendo di ottenere il miglior contatto elettrico possibile.
Il diametro dei fori dei Giunti in Treccia di Rame Ω LINK, permette da un lato l'ottimizzazione del contatto elettrico in funzione del polo dell'interruttore; sull'altra estremità, la possibilità di collegamento "Universale" a sistemi di distribuzione in barre.
L'Isolamento realizzato in PVC della Connessione Elettrica Isolata Ω LINK, soddisfa tutte le caratteristiche elettriche richieste per l'utilizzo in Impianti in Bassa Tensione.
La temperatura di funzionamento continuo massimo è di 105° C
La migliore alternativa alle connessioni in cavo e alle barre flessibili
VANTAGGI
Connessioni pronte all'uso: nessuna operazione preventiva richiesta
• Estrema flessibilità comparata ad un cavo di sezione analoga
• Riduzione degli ingombri all'interno del quadro
• Riduzione di peso
• Grande risparmio di tempo
• Nessun cavo da tagliare a misura
• Nessuna spelatura delle estremità del cavo o della barra flessibile
• Nessun capocorda da acquistare
• Nessuna operazione di crimpatura o di foratura
ECCELLENTI PARAMETRI ELETTRICI
• Ottimo isolamento elettrico
• Migliore superficie di contatto
• Migliore capacità di trasporto corrente a parità di sezione in confronto ad un cavo e/o sezione ridotta a parità di corrente nominale
• Riscaldamento ridotto dovuto all'assenza di connessioni crimpate e alla migliore capacità di trasporto della corrente
• Eccellente comportamento in caso di corto circuito
GAMMA
• Sezioni : da 25 mm2 a 240 mm2
• Lunghezze : da 230mm a 1030 mm
• Portata Nominale : da 125 A a 630 A
Teknomega ha presentato alla recente edizione Solarexpo 2013 il Nuovo Kit Universale di Fissaggio Impianti Fotovoltaici 3 kW per uso residenziale composti da Profili su misura, staffe fissaggio su tetto, staffe fissaggio pannelli fotovoltaici laterali e intermedie, viteria
This document provides details about the AGR 237: Wildlife Biology course. The course covers topics like definitions of wildlife terms, justifications for wildlife conservation, status and distribution of wildlife in India, wildlife ecology, management, damage control, census methods, protected areas, and conservation strategies. Students will learn about the importance of wildlife, status of rare and endangered species, biodiversity, environmental protection, and the need for wildlife conservation. The course uses two textbooks and meets for one lecture per week.
A presentation given after being requested by one of the children at Popcorn House, Langs Cambridge Ontario. Light and Informative. Lots of moving pictures.
Système de Fixation en Acier Ω STRUT
Profils, pattes et consoles de fixation STRUT Pour être vraiment complète, la gamme dédiée aux structures de fixation doit inclure un riche éventail de produits synergiques entre eux, comme la série Ω STRUT : profils, consoles et pattes de fixation en acier.
Les profils en acier Ω STRUT permettent de réaliser n’importe quel type de support (consoles, berceaux, supports à plusieurs étages, etc.) pour suspendre des systèmes électriques, mécaniques, hydrauliques, etc.
Les consoles en acier Ω STRUT, robustes et avec plaque soudée, répondent aux exigences d'installation et de soutien pour les conduits, les chemins de câbles, les tubes, les conduits d'air, etc., en garantissant une longue durée.
Enfin, les Pattes de fixation Ω STRUT sont l’élément de jonction entres les profils ou avec les structures. Les pattes de fixation en acier pour profils, fournies avec les vis et les écrous référencés dans le catalogue, permettent de construire, directement sur place, une structure plus adaptée aux besoins de l’installation.
Principaux avantages des structures de fixation STRUT :
- Montage rapide et économique: il est possible de créer directement sur le chantier la solution idéale pour l’installation de vos systèmes ou des composants des systèmes.
- Mode d’emploi: les structures de fixation Ω STRUT se coupent avec une petite scie ou une scie à onglet, et s’assemblent avec une clé anglaise pour serrer la boulonnerie de fixation.
- Sécurité et Fiabilité: il est facile de dimensionner correctement le support à utiliser, en connaissant les charges de portée spécifiques à soutenir. Ils sont déclarés pour toutes les structures de fixation Ω STRUT.
- Vaste Gamme: Profils Ω STRUT en forme de "C" ou double "C" avec bords repliés
Caractéristiques
- Dimensions: 41x21 et 41x41
- Épaisseurs: 1,5 et 2,5 mm
- Longueurs Standard en stock: 3 m et 4 m
- Type de profil: Plein - Troué
- Finition/Zingage: électrolytique (S) - à chaud (Z)
Profils Ω STRUT sur demande :
Longueur: 2 m et 6 m
Finition: Acier Inox
Profils en Acier Ω STRUT
Parcourez les différents éléments en acier structuraux: structures de fixation avec caractéristiques et utilisation différentes mais synergiques entre elles.
Profils en acier STRUT Consoles en acier Pattes de fixation plates en acier zingués
Pattes de fixation en acier boulon pré-assemblé Accessoires pour profils, consoles et pattes de fixation Strut
www.teknomega.fr
Juntas en Trenza de Cobre Aisladas Ω LINK
http://www.teknomega.es/departamento-paneles/juntas-aisladas-o-link
Ω LINK es una Conexión Prefabricada, Flexible, realizada en trenza estañada de cobre, revestida con aislamiento en PVC, lista para el uso.
VENTAJAS Y PRESTACIONES JUNTAS TRENZA DE COBRE:
file n° E300607 (approval pending)
Ω LINK es la solución más rápida y conveniente para realizar Conexiones Eléctricas de 125 a 630 A.
Los terminales de la conexión está realizados con un tubo de cobre estañado y prensado. Su dimensión está ideada de acuerdo con los polos de los interruptores en forma de caja, de major difusión en el mercado, permitiendo obtener el mejor contacto eléctrico posible.
El diámetro de los agujeros permite: de un lado la optimización del contacto eléctrico, de acuerdo con el polo del interruptor y de la otra extremidad, la posibilidad de una conexión universal con sistemas de distribución en barras.
El Aislamiento, realizado en PVC, satisface todas las características eléctricas requeridas para un empleo en B.T.
La temperatura máxima de funcionamiento continuoes de 105° C.
La mejor alternativa a las conexiones cableadas y a las barras flexibles
VENTAJAS
Conexiónes listas para el uso: no se requiere ninguna operación preventiva
• Suma flexibilidad comparada con un cable de sección análoga
• Reducción de los estorbos en el interior del cuadro
• Reducción del peso
• Gran ahorro de tiempo
• Ningún cable de cortar a medida
• Ninguna peladura de las extremidades en el cable o en el bar
• Ningún terminal de cable necesario
• Ninguna operación de encaste o de perforación
EXCELENTES PARÁMETROS ELÉCTRICOS
• Óptimo aislamiento eléctrico
• Mejor superficie de contacto
Verbindungsstücke aus Isoliertem Kupfergeflecht Ω LINK
http://www.teknomega.de/bereich-schaltanlagen/isolierte-verbindungsstuecke-o-link
Ω LINK ist eine Vorgefertigte, Verbindung, aus verzinntem Kupfergeflecht, mit PVC-Isolierung.
VORTEILE UND LEISTUNGEN DER VERBINDUNGSSTÜCKE AUS KUPFERGEFLECHT:
file n° E300607 (approval pending)
Ω LINK ist die schnellste und günstigste Lösung zur Verwirklichung elektrischer Verbindungen von 125 bis 630 A.
Die Anschlüssklemmen sind aus verzinntem, gepresstem Kupferrohr. Die Abmessungen entsprechen den Anschlüssen der üblicherweise verwendeten Leistungsschalter, für ein bestmögliche elektr. Kontaktierung.
Der Durchmesser der Bohrungen ermöglicht einerseits die Optimierung des elektrischen Kontakts entsprechend den Polen dei Leistungsschalter, andererseits die Möglichkeit eines Universalanschlusses für Verteilersysteme in Form von Schienen.
Die Isolierung aus PVC, erfüllt alle geforderten, elektrischen Eigenschaften für den Einsatz in B.T.
Die maximale Dauerbetriebstemperatur beträgt 105° C
Die beste Alternative zu Kabelanschlüssen und isolierte Schienen
VORTEILE
Gebrauchsfertige Verbindungen:
• Extreme flexibel im Vergleich mit einem Kabel bei gleichem Querschnitt
• Platzersparnis im inneren der Schalttafel
• Gewichtreduzierung
• Grosse Zeitersparnis
• Kein Kabel, das auf eine bestimmte Länge zugeschnitten werden muss
• Kein Abisolieren
• Kein Kabelschub erforderlich
• Kein Crimpen oder Bohren notwendig
EXZELLENTE ELEKTRISCHE EIGENSCHAFTEN
• Optimale elektrische Isolierung
• Optimale Kontaktoberfläche
• Bessere Stromtransportfähigkeit bei gleichem Querschnitt im Vergleich zu einem Kabel und/oder reduzierter Querschnitt bei gleiche Strom
• Reduzierte Erwärmung
• Exzellentes Verhalten bei Kurzschluss
PRODUKTPALETTE
• Querschnitte: von 25 mm2 bis 240 mm2
• Längen: von 230 mm bis 930 mm
• Nominaler Stromdurchfluss: von 125 A bis 630 A
Joints Isolés en Tresse de Cuivre Ω LINK
http://www.teknomega.fr/section-tableaux-electriques/joints-isoles-o-link
Ω LINK est une Connexion Flexible Préfabriquée prête à servir, réalisée en tresse de cuivre étamée et revêtue d'un isolant en PVC.
AVANTAGES ET PERFORMANCES DES JOINTS EN TRESSE DE CUIVRE:
file n° E300607 (approval pending)
Ω LINK est la solution la plus rapide et pratique pour la réalisation de connexions électriques de 125 à 630 A.
Les bornes de la connexion sont réalisées à partir d'un tube de cuivre étamé pressé. Leurs dimensions sont étudiées en fonction des pôles des disjoncteurs les plus répandus sur le marché, ce qui permet d'avoir le meilleur contact électrique possible.
Le diamètre des trous permet d'un côté d'optimiser le contact électrique en fonction du pôle de l'interrupteur; sur l'autre extrémité, la possibilité d'une connexion universelle à des systèmes de distribution à barres.
L’Isolation en PVC satisfait toutes les caractéristiques électriques requises pour une utilisation en Basse Tension.
La température de service continue maximum est de 105° C.
La meilleure alternative aux connexions en câble
AVANTAGES
Connexions prêtes à servir: aucune opération préventive n'est requise
• Extrême flexibilité par rapport à un câble de même section
• Réduction des encombrements à l'intérieur du tableau
• Réduction de poids
• Forte économie de temps
• Aucun câble à couper à la mesure
• Aucun dénudage de têtes du câble ou de la barre souple
• Pas besoin d'acheter de cosses
• Pas besoin de sertissage ou forage
EXCELLENTES PARAMÈTRES ÉLECTRIQUES
• Excellente isolation électrique
• Meilleure surface de contact
• Meilleure ampacité à section égale par rapport à un câble et/ou à une section réduite à parité de courant nominal
• Echauffement réduit du fait de l'absence de connexions serties et de la meilleure ampacité
• Excellente résistance aux court-circuit
GAMME
• Sections: de 25 mm2 à 240 mm2
• Longueurs: de 230 mm à 930 mm
• Ampacité nominale: de 125 A à 630 A
Giunti in Treccia di Rame Isolati Ω LINK
http://www.teknomega.it/cablaggio-quadri-elettrici/connessione-elettrica-flessibile-isolata
Ω LINK è una ConnessionePrefabbricata Flessibile, realizzata in treccia di rame stagnata, rivestita con isolamento in PVC, pronta all'uso.
VANTAGGI E PRESTAZIONI GIUNTI IN TRECCIA DI RAME ISOLATI:
file n° E300607 (approval pending)
Ω LINK è la soluzione più rapida e conveniente per realizzare Connessioni Elettriche da 125 a 630 A.
I terminali della connessione sono realizzati con un tubo di rame stagnato, pressato. La loro dimensione è studiata in ragione dei poli degli interruttori scatolati di maggior diffusione nel mercato, consentendo di ottenere il miglior contatto elettrico possibile.
Il diametro dei fori dei Giunti in Treccia di Rame Ω LINK, permette da un lato l'ottimizzazione del contatto elettrico in funzione del polo dell'interruttore; sull'altra estremità, la possibilità di collegamento "Universale" a sistemi di distribuzione in barre.
L'Isolamento realizzato in PVC della Connessione Elettrica Isolata Ω LINK, soddisfa tutte le caratteristiche elettriche richieste per l'utilizzo in Impianti in Bassa Tensione.
La temperatura di funzionamento continuo massimo è di 105° C
La migliore alternativa alle connessioni in cavo e alle barre flessibili
VANTAGGI
Connessioni pronte all'uso: nessuna operazione preventiva richiesta
• Estrema flessibilità comparata ad un cavo di sezione analoga
• Riduzione degli ingombri all'interno del quadro
• Riduzione di peso
• Grande risparmio di tempo
• Nessun cavo da tagliare a misura
• Nessuna spelatura delle estremità del cavo o della barra flessibile
• Nessun capocorda da acquistare
• Nessuna operazione di crimpatura o di foratura
ECCELLENTI PARAMETRI ELETTRICI
• Ottimo isolamento elettrico
• Migliore superficie di contatto
• Migliore capacità di trasporto corrente a parità di sezione in confronto ad un cavo e/o sezione ridotta a parità di corrente nominale
• Riscaldamento ridotto dovuto all'assenza di connessioni crimpate e alla migliore capacità di trasporto della corrente
• Eccellente comportamento in caso di corto circuito
GAMMA
• Sezioni : da 25 mm2 a 240 mm2
• Lunghezze : da 230mm a 1030 mm
• Portata Nominale : da 125 A a 630 A
Teknomega ha presentato alla recente edizione Solarexpo 2013 il Nuovo Kit Universale di Fissaggio Impianti Fotovoltaici 3 kW per uso residenziale composti da Profili su misura, staffe fissaggio su tetto, staffe fissaggio pannelli fotovoltaici laterali e intermedie, viteria
Este documento presenta accesorios de fijación para plantas fotovoltaicas fabricados por Teknomega, incluyendo tapones de plástico para perfiles, sellos de neopreno, y sellos bituminosos o butílicos. También proporciona enlaces para obtener más información sobre los productos y para descargar catálogos.
Para Plantas Fotovoltaicas en Techos Pendientes, en cemento y madera, Teknomega ha desarrollado específicas Abrazaderas de Acero Galvanizado o Inoxidable
Este documento describe los sistemas de fijación para paneles fotovoltaicos desarrollados por Teknomega bajo la marca Ω-Solar. Los sistemas están diseñados para fijar todas las partes de una planta fotovoltaica a diferentes tipos de estructuras utilizando materiales resistentes como aluminio, acero galvanizado y acero inoxidable. El catálogo incluye una variedad de productos de fijación como perfiles metálicos, abrazaderas y tornillos.
Componentes de Fijación para Plantas Fotovoltaicas y Solares Ω-Solar: por la experiencia Teknomega en los Sistemas de Fijación Industrial, un "Nuevo Mundo a Fijar
Collares y Mordazas de Fijación en Estructuras de Acero y Abrazaderas de Fijación en Vigas de Cemento. Instalación fácil y segura sin soldaduras y perforaciones
Perfiles de Acero y Elementos Estructurales Ω STRUT: una rica familia de productos sinérgicos para realizar cualquier suporte como ménsulas, cunas y multillano
El documento presenta los diferentes sistemas de fijación para plantas industriales y civiles ofrecidos por la empresa Teknomega, incluyendo sistemas de fijación rápida Ω CLIP para fijar componentes eléctricos y mecánicos, perfiles de fijación Ω STRUT para sujetar plantas que pesan hasta 2 toneladas, collares y mordazas de fijación Ω CLAMP para fijar tuberías y cables, y suspensiones en cable de acero Ω ZIP para suspender distintos componentes. La empresa ofrece
Diseñamos y Fabricamos Conexiones Eléctricas de Potencia Especiales y Conexiones según el Dibujo del Cliente. Mira los tipos disponibles o envíanos tu pedido
Este documento proporciona información sobre accesorios de cableado eléctrico de baja tensión fabricados por Teknomega. Describe brevemente los principales componentes para el cableado como placas de bornas de latón, espaciadores de metal y plástico, tapones de plástico e insertos pasahilos. También incluye enlaces para descargar catálogos de productos y una lista de referencia cruzada.
Aisladores Eléctricos Cilíndricos y Columna Distanciales con Alta Resistencia Mecánica y Óptima Capacidad de Aislamiento para suportar componentes eléctricos
Repartidores con Placa de bornes, Repartidores monobloque y Repartidores Compactos para distribuciones de 40 A a 500 A. A instalar en Perfiles DIN (Guía Omega)
Este documento proporciona información sobre soportes repartidores tripulares y cuadripolares fabricados por Teknomega. Describe las características técnicas de los soportes, incluidos los materiales, resistencia al fuego y temperatura de funcionamiento. También incluye tablas con las dimensiones y códigos de los diferentes modelos de soportes, así como distancias recomendadas según la corriente de cortocircuito.
Repartidores con Placa de bornes, Repartidores monobloque y Repartidores Compactos para distribuciones de 40 A a 500 A. A instalar en Perfiles DIN (Guía Omega)
Placas de bornas, Repartidores Compactos, Repartidores MonobloqueTeknomega S.r.l.
Este documento proporciona información sobre soportes repartidores de Teknomega. Describe diferentes modelos de soportes repartidores tripulares y cuadripolares, incluyendo sus características técnicas y tablas con distancias recomendadas según la corriente de cortocircuito. También incluye enlaces para descargar catálogos de productos.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Este documento presenta accesorios de fijación para plantas fotovoltaicas fabricados por Teknomega, incluyendo tapones de plástico para perfiles, sellos de neopreno, y sellos bituminosos o butílicos. También proporciona enlaces para obtener más información sobre los productos y para descargar catálogos.
Para Plantas Fotovoltaicas en Techos Pendientes, en cemento y madera, Teknomega ha desarrollado específicas Abrazaderas de Acero Galvanizado o Inoxidable
Este documento describe los sistemas de fijación para paneles fotovoltaicos desarrollados por Teknomega bajo la marca Ω-Solar. Los sistemas están diseñados para fijar todas las partes de una planta fotovoltaica a diferentes tipos de estructuras utilizando materiales resistentes como aluminio, acero galvanizado y acero inoxidable. El catálogo incluye una variedad de productos de fijación como perfiles metálicos, abrazaderas y tornillos.
Componentes de Fijación para Plantas Fotovoltaicas y Solares Ω-Solar: por la experiencia Teknomega en los Sistemas de Fijación Industrial, un "Nuevo Mundo a Fijar
Collares y Mordazas de Fijación en Estructuras de Acero y Abrazaderas de Fijación en Vigas de Cemento. Instalación fácil y segura sin soldaduras y perforaciones
Perfiles de Acero y Elementos Estructurales Ω STRUT: una rica familia de productos sinérgicos para realizar cualquier suporte como ménsulas, cunas y multillano
El documento presenta los diferentes sistemas de fijación para plantas industriales y civiles ofrecidos por la empresa Teknomega, incluyendo sistemas de fijación rápida Ω CLIP para fijar componentes eléctricos y mecánicos, perfiles de fijación Ω STRUT para sujetar plantas que pesan hasta 2 toneladas, collares y mordazas de fijación Ω CLAMP para fijar tuberías y cables, y suspensiones en cable de acero Ω ZIP para suspender distintos componentes. La empresa ofrece
Diseñamos y Fabricamos Conexiones Eléctricas de Potencia Especiales y Conexiones según el Dibujo del Cliente. Mira los tipos disponibles o envíanos tu pedido
Este documento proporciona información sobre accesorios de cableado eléctrico de baja tensión fabricados por Teknomega. Describe brevemente los principales componentes para el cableado como placas de bornas de latón, espaciadores de metal y plástico, tapones de plástico e insertos pasahilos. También incluye enlaces para descargar catálogos de productos y una lista de referencia cruzada.
Aisladores Eléctricos Cilíndricos y Columna Distanciales con Alta Resistencia Mecánica y Óptima Capacidad de Aislamiento para suportar componentes eléctricos
Repartidores con Placa de bornes, Repartidores monobloque y Repartidores Compactos para distribuciones de 40 A a 500 A. A instalar en Perfiles DIN (Guía Omega)
Este documento proporciona información sobre soportes repartidores tripulares y cuadripolares fabricados por Teknomega. Describe las características técnicas de los soportes, incluidos los materiales, resistencia al fuego y temperatura de funcionamiento. También incluye tablas con las dimensiones y códigos de los diferentes modelos de soportes, así como distancias recomendadas según la corriente de cortocircuito.
Repartidores con Placa de bornes, Repartidores monobloque y Repartidores Compactos para distribuciones de 40 A a 500 A. A instalar en Perfiles DIN (Guía Omega)
Placas de bornas, Repartidores Compactos, Repartidores MonobloqueTeknomega S.r.l.
Este documento proporciona información sobre soportes repartidores de Teknomega. Describe diferentes modelos de soportes repartidores tripulares y cuadripolares, incluyendo sus características técnicas y tablas con distancias recomendadas según la corriente de cortocircuito. También incluye enlaces para descargar catálogos de productos.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
In the Adani-Hindenburg case, what is SEBI investigating.pptxAdani case
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Authentically Social by Corey Perlman - EO Puerto Rico
Strut steel-channels-steel-cantilevers
1. Ω STRUT
Ω STRUT - Brackets and Cantilevers Profiles
Ω STRUT - Brackets and Cantilevers Profiles
Product Characteristics
Laying cable trunking is one of the most expensive items for industrial electric plant fitters. This issue led to the creation of alternative
Fastening Systems aiming fitting simplicity and quickness. So Teknomega looked for innovative solutions whose purpose was to give more
and more flexible answers to the needs of modern plant engineering.
Ω STRUT
Today, still, Fastening Systems are not adequately held in consideration in industrial plant engineering. Their huge impact in terms of costs
is weighted only at works ended, when it is too late to fix the problem.
When proven specialists are called in during design, there are no improvised and unlikely fastenings, often built without a specific technical
knowledge.
Specialists such as Teknomega can guide the installer towards more efficient solutions, such as those proposed by the "Ω STRUT" family.
This range consists in a series of complementary products: profiles (channels), various types of cantilevers and connection brackets which,
almost like a "Meccano", create truly quick and safe fastening structures. Another peculiarity of the "Ω STRUT" range, is the great versatility
of its accessories, such as collars, threaded rods, and chains, which can be fitted both on concrete carrying structures and on metal beams.
13
2. Ω STRUT
41x21 2.5 mm thickness - Solid
Ω STRUT - Steel Channels
PREGALVANIZED
Code Reference F L mt Weight kg
PRF1005 PRF-B3-SP S 3 5.31 1 30
PRF1010 PRF-B4-SP S 4 7.08 1 30
PRF1015* PRF-B6-SP S 6 10.62 1 30
HOT DEEP GALVANIZATION
Code Reference F L mt Weight kg
PRF1025 PRF-B3-ZP Z 3 5.31 1 30
PRF1030 PRF-B4-ZP Z 4 7.08 1 30
PRF1035* PRF-B6-ZP Z 6 10.62 1 30
41x41 2.5 mm thickness - Solid
PREGALVANIZED
Code Reference F L mt Weight kg
PRF1045 PRF-A3-SP S 3 7.80 1 30
PRF1050 PRF-A4-SP S 4 10.40 1 30
PRF1055* PRF-A6-SP S 6 15.60 1 30
HOT DEEP GALVANIZATION
Code Reference F L mt Weight kg
PRF1065 PRF-A3-ZP Z 3 7.80 1 30
PRF1070 PRF-A4-ZP Z 4 10.40 1 30
PRF1075* PRF-A6-ZP Z 6 15.60 1 30
41x41 double 2.5 mm thickness - Slotted
PREGALVANIZED
Code Reference F L mt Weight kg
PRF1085 PRF-A3D-S S 3 15.60 1 14
PRF1090 PRF-A4D-S S 4 20.80 1 14
PRF1095* PRF-A6D-S S 6 31.20 1 14
HOT DEEP GALVANIZATION
Code Reference F L mt Weight kg
PRF1105 PRF-A3D-Z Z 3 15.60 1 14
PRF1110 PRF-A4D-Z Z 4 20.80 1 14
PRF1115* PRF-A6D-Z Z 6 31.20 1 14
*Upon request
14
3. Ω STRUT
41x21 double 2.5 mm thickness - Slotted
Ω STRUT - Steel Channels
PREGALVANIZED
Slot Slot
Code Reference F L mt Weight kg dim. inter.
PRF1275 PRF-B3D-S S 3 10.40 25x12 50 1 30
PRF1280 PRF-B4D-S S 4 13.90 25x12 50 1 30
PRF1285* PRF-B6D-S S 6 20.80 25x12 50 1 30
HOT DEEP GALVANIZATION
Code Reference F L mt Weight kg Slot Slot
dim. inter.
PRF1295 PRF-B3D-Z Z 3 10.40 25x12 50 1 30
PRF1300 PRF-B4D-Z Z 4 13.90 25x12 50 1 30
PRF1305* PRF-B6D-Z Z 6 20.80 25x12 50 1 30
41x21 2.5 mm thickness - Slotted
PREGALVANIZED
L mt Weight kg Slot Slot
Code Reference F dim. inter.
PRF1125 PRF-B3-SF S 3 5.1 25x12 50 1 30
PRF1130 PRF-B4-SF S 4 6.8 25x12 50 1 30
PRF1135* PRF-B6-SF S 6 10.2 25x12 50 1 30
HOT DEEP GALVANIZATION
L mt Weight kg Slot Slot
Code Reference F dim. inter.
PRF1145 PRF-B3-ZF Z 3 5.1 25x12 50 1 30
PRF1150 PRF-B4-ZF Z 4 6.8 25x12 50 1 30
PRF1155* PRF-B6-ZF Z 6 10.2 25x12 50 1 30
41x41 2.5 mm thickness - Slotted
PREGALVANIZED
Code Reference F L mt Weight kg Slot Slot
dim. inter.
PRF1165 PRF-A3-SF S 3 7.7 25x12 50 1 30
PRF1170 PRF-A4-SF S 4 10.2 25x12 50 1 30
PRF1175* PRF-A6-SF S 6 15.3 25x12 50 1 30
HOT DEEP GALVANIZATION
Code Reference F L mt Slot Slot
Weight kg dim. inter.
PRF1185 PRF-A3-ZF Z 3 7.7 25x12 50 1 30
PRF1190 PRF-A4-ZF Z 4 10.2 25x12 50 1 30
PRF1195* PRF-A6-ZF Z 6 15.3 25x12 50 1 30
*Upon request
15
4. Ω STRUT
41x41 2.5 mm thickness - Slots on 3 sides
Ω STRUT - Steel Channels
PREGALVANIZED
Code Reference F L mt Weight kg Slot Slot
dim. inter.
PRF1205 PRF-A3-SF3 S 3 7.5 25x12 50 1 30
PRF1210 PRF-A4-SF3 S 4 10.0 25x12 50 1 30
PRF1215* PRF-A6-SF3 S 6 15.0 25x12 50 1 30
HOT DEEP GALVANIZATION
Code Reference F L mt Weight kg Slot Slot
dim. inter.
PRF1225 PRF-A3-ZF3 Z 3 7.5 25x12 50 1 30
PRF1230 PRF-A4-ZF3 Z 4 10.0 25x12 50 1 30
PRF1235* PRF-A6-ZF3 Z 6 15.0 25x12 50 1 30
41x21 1.5 mm thickness - Slotted
PREGALVANIZED
Code Reference F L mt Weight kg Slot Slot
dim. inter.
PRF1260 PRF-LB3-SF S 3 3.9 25x12 50 1 30
PRF1265 PRF-LB4-SF S 4 5.2 25x12 50 1 30
41x41 1.5 mm thickness - Slots on 3 sides
PREGALVANIZED
F L mt Slot Slot
Code Reference Weight kg dim. inter.
PRF1245 PRF-LA3-SF3 S 3 5.1 25x12 50 1 30
PRF1250 PRF-LA4-SF4 S 4 6.8 25x12 50 1 30
*Upon request
16
5. Ω STRUT - CHANNEL LOAD TABLES
PROFILES
Ω STRUT - Steel Channels - CHANNEL LOAD TABLES
41x41x2.5 mm PROFILE - Non-slotted
Unif. distrib. Central
Piece Length (mm)
Loads expressed in kg load load
500 820 410
1000 408 204
1500 270 135
2.5 mm thickness 2000 200 100
2500 164 83
3000 129 65
4000 96 49
Max. deflection 1/250 1/250
Permitted admissible load (kg/mm²) 16 16
Total area (mm²) 310179
X area center (mm) 0
Y area center (mm) -2.41
Global X moment (lxx) (mm4) 67132.33
Global Y moment (lyy) (mm4) 85104.64
Distrib. Load
Distrib. Load
Distrib. load
Top Load
Load in kg
Load in kg
Channel lenght mm
41x41x2.5 mm CHANNEL - Slotted 41x41x2.5 mm CHANNEL - Slots on 3 sides
Unif. distrib. Central Unif. distrib. Central
Piece Length (mm) load load
Piece Length (mm) load load
500 774 388 500 760 380
1000 386 193 1000 379 189
1500 255 128 1500 250 125
2000 189 94 2000 186 92
2500 155 78 2500 152 76
3000 122 61 3000 120 60
4000 91 46 4000 89 45
Max. deflection 1/250 1/250 Max. deflection 1/250 1/250
Permitted admissible load (kg/mm²) 16 16 Permitted admissible load (kg/mm²) 16 16
Total area (mm²) 284879 Total area (mm²) 234279
X area center (mm) 0 X area center (mm) 0
Y area center (mm) -0.91 Y area center (mm) -1.11
Global X moment (lxx) (mm4) 59220.55 Global X moment (lxx) (mm4) 58659.32
Global Y moment (lyy) (mm4) 84849.53 Global Y moment (lyy) (mm4) 65881.45
Distrib. Load Distrib. Load
Top Load Top Load
Load in kg
Load in kg
Channel lenght mm Channel lenght mm
17
6. Ω STRUT - CHANNEL LOAD TABLES
PROFILES
Ω STRUT - Steel Channels - CHANNEL LOAD TABLES
41x21x2.5 mm CHANNEL - Non-slotted
Unif. distrib. Central
Piece Length (mm)
Loads expressed in kg load load
500 261 130
1000 129 65
1500 84 43
2.5 mm thickness 2000 62 30
2500 50 25
3000 39 19
4000 28 14
Max. deflection 1/250 1/250
Permitted admissible load (kg/mm²) 16 16
Total area (mm²) 218179
X area center (mm) 0
Y area center (mm) -1.85
Global X moment (lxx) (mm4) 12166.79
Global Y moment (lyy) (mm4) 50617.21
Distrib. Load
Top Load
Load in kg
Channel lenght mm
41x21x2.5 mm CHANNEL - Slotted on base 41x41 mm CHANNEL - Double 2.5 thickness
Unif. distrib. Central Unif. distrib. Central
Piece Length (mm) load load
Piece Length (mm) load load
500 246 123 500 2316 1158
1000 122 61 1000 1154 578
1500 79 40 1500 765 383
2000 58 29 2000 569 284
2500 47 24 2500 470 234
3000 36 18 3000 370 186
4000 26 13 4000 277 139
Max. deflection 1/250 1/250 Max. deflection 1/250 1/250
Permitted admissible load (kg/mm²) 16 16 Permitted admissible load (kg/mm²) 16 16
Total area (mm²) 192879 Total area (mm²) 569759
X area center (mm) 0 X area center (mm) 0
Y area center (mm) -0.86 Y area center (mm) 0
Global X moment (lxx) (mm4) 10544.4 Global X moment (lxx) (mm4) 337082.54
Global Y moment (lyy) (mm4) 50362.11 Global Y moment (lyy) (mm4) 169699.06
Distrib. Load Distrib. Load
Top Load Top Load
Load in kg
Load in kg
Channel lenght mm Channel lenght mm
18
7. Ω STRUT - CHANNEL LOAD TABLES
PROFILES
Ω STRUT - Steel Channels - CHANNEL LOAD TABLES
41x21 mm PROFILE - Double 2.5 thickness
Unif. distrib. Central
Piece Length (mm)
Loads expressed in kg load load
500 726 363
1000 360 180
1500 238 119
2.5 mm thickness 2000 175 87
2500 142 71
3000 111 55
4000 83 41
Max. deflection 1/250 1/250
Permitted admissible load (kg/mm²) 16 16
Total area (mm²) 385759
X area center (mm) 0
Y area center (mm) 0
Global X moment (lxx) (mm4) 56919.03
Global Y moment (lyy) (mm4) 100724.21
Distrib. Load
Top Load
Load in kg
Channel lenght mm
1.5 mm thickness
41x21x1.5 mm PROFILE - slots on 3 sides 41x21x1.5 mm PROFILE - Slotted on base
Unif. distrib. Central Unif. distrib. Central
Piece Length (mm) load load
Piece Length (mm) load load
500 505 253 500 173 86
1000 252 126 1000 85 43
1500 166 83 1500 56 27
2000 123 62 2000 41 20
2500 101 50 2500 33 16
3000 79 40 3000 25 12
4000 59 29 4000 18 9
Max. deflection 1/250 1/250 Max. deflection 1/250 1/250
Permitted admissible load (kg/mm²) 16 16 Permitted admissible load (kg/mm²) 16 16
Total area (mm²) 158446 Total area (mm²) 147946
X area center (mm) 0 X area center (mm) 0
Y area center (mm) -0.9 Y area center (mm) -1.77
Global X moment (lxx) (mm4) 41145.77 Global X moment (lxx) (mm4) 8915.23
Global Y moment (lyy) (mm4) 45645.29 Global Y moment (lyy) (mm4) 35274.92
Distrib. Load Distrib. Load
Top Load Top Load
Load in kg
Load in kg
Channel lenght mm Channel lenght mm
19
8. Ω STRUT
41x41 double slotted channel cantilever
Ω STRUT - Steel cantilevers arms
L Weight Thk Slots Plate size
Code Reference F mm kg mm mm W S
HxWxTh Slots
mm
MSL1000 MSL-P300-D-Z 6 Z 300 2.14 2.5 25x12 160x50x8 14x25 L
MSL1005 MSL-P400-D-Z 6 Z 400 2.68 2.5 25x12 160x50x8 14x25 H
MSL1010 MSL-P500-D-Z 6 Z 500 3.21 2.5 25x12 160x50x8 14x25
MSL1015 MSL-P600-D-Z 1 Z 600 3.76 2.5 25x12 160x50x8 14x25
MSL1020 MSL-P750-D-Z 1 Z 750 4.57 2.5 25x12 160x50x8 14x25
MSL1030 MSL-P900-D-Z 1 Z 900 4.91 2.5 25x12 160x50x8 14x25
MSL1035 MSL-P1000-D-Z 1 Z 1000 5.91 2.5 25x12 160x50x8 14x25
41x41 slotted channel cantilever
L Weight Thk Slots Plate size
Code Reference F mm kg mm mm W S
HxWxTh Slots
mm
MSL1040 MSL-P150-F-Z 10 Z 150 0.696 2.5 25x12 120x50x6 14x25 L
H
MSL1045 MSL-P200-F-Z 10 Z 200 0.826 2.5 25x12 120x50x6 14x25
MSL1050 MSL-P300-F-Z 10 Z 300 1.096 2.5 25x12 120x50x6 14x25
MSL1055 MSL-450-F-Z 6 Z 450 1.730 2.5 25x12 160x50x8 14x25
MSL1060 MSL-P500-F-Z 6 Z 500 1.865 2.5 25x12 160x50x8 14x25
MSL1065 MSL-P600-F-Z 1 Z 600 2.135 2.5 25x12 160x50x8 14x25
MSL1070 MSL-P750-F-Z 1 Z 750 2.539 2.5 25x12 160x50x8 14x25
MSL1071 MSL-P900-F-Z 1 Z 900 2.945 2.5 25x12 160x50x8 14x25
MSL1072 MSL-P1000-F-Z 1 Z 1000 3.214 2.5 25x12 160x50x8 14x25
Slotted cable tray cantilever
L Weight Thk Slots Plate size
Code Reference F W S
mm kg mm mm Slots
HxWxTh mm
MSL1075 MSL-L110-F-Z 20 Z 110 0.43 1.8 30x9 120x50x6 14x25 L
H
MSL1080 MSL-L160-F-Z 20 Z 160 0.50 1.8 30x9 120x50x6 14x25
MSL1085 MSL-L210-F-Z 20 Z 210 0.59 1.8 30x9 120x50x6 14x25
MSL1090 MSL-L310-F-Z 20 Z 310 0.79 1.8 30x9 120x50x6 14x25
MSL1095 MSL-L410-F-Z 20 Z 410 1.24 1.8 30x9 160x50x6 14x25
MSL1100 MSL-L510-F-Z 10 Z 510 1.50 1.8 30x9 160x50x8 14x25
MSL1105 MSL-L610-F-Z 10 Z 610 1.79 1.8 30x9 160x50x8 14x25
Upon request: powder painted
20
12. Ω STRUT
Thickness 6 mm
Ω STRUT- Brackets with pre-mounted M10 bolts - Electrolytic galvanization
Prefitted bolt
assembled by plastic insert
ANGLE BRACKETS - TYPE "W"
Code Reference 96
90
48
STF2105 STF-WL2-P 10
STF2110 STF-WL3-P 10 48 40 96
STF2115
STF2105 STF2110
STF2115 STF-WL4-P 10
FLAT BRACKETS - TYPE "P" 40
40
Code Reference 40
165
89 135
STF2000 STF-P2-P 10 STF2000 STF2005 STF2010
STF2005 STF-P3-P 10 90
STF2010 STF-P4-P 10 90
STF2015 STF-PL3-P 10 90
STF2020 STF-PT4-P 10 40
40
40
40 140
STF2015 STF2020
ARROW BRACKET
Code Reference
100
100
STF2140 STF-SR100-P 1 STF2140
ND: Brackets with pre mounted bolts can be used ONLY on 2.5 mm thick Strut profiles
24
13. Ω STRUT
Ω STRUT - Accessories
Ω STRUT - Accessories
To be complete, a range of fastening systems should also include a large family of synergic
accessories.
From the large series of nuts for Strut channel, galvanized or in stainless steel, with long,
short or without spring, then a wide choice of bolts and other related accessories. Our range
of collars for both hydraulic and electric plants is of primary importance.
This extended range of accessories closes with the family designed for holdfasts and clamps,
both for metal structures and concrete beams.
25
14. Ω STRUT
DAP - Channels Nuts
Ω STRUT - Accessories
ELECTRO GALVANIZED
Code Reference F M
DAP1000 DAP-M6S 100 E M6
DAP1005 DAP-M8S 100 E M8
DAP1010 DAP-M10S 100 E M10
DAP1015 DAP-M12S 100 E M12
DAP1020 DAP-M6C 100 E M6
DAP1025 DAP-M8C 100 E M8
DAP1030 DAP-M10C 100 E M10
DAP1035 DAP-M12C 100 E M12
DAP1040 DAP-M6L 100 E M6
DAP1045 DAP-M8L 100 E M8
DAP1050 DAP-M10L 100 E M10
DAP1055 DAP-M12L 100 E M12
HOT DEEP GALVANIZED
Code Reference F M
DAP2000 DAP-M6S-ZC 100 Z M6
DAP2005 DAP-M8S-ZC 100 Z M8
DAP2010 DAP-M10S-ZC 100 Z M10
DAP2020 DAP-M6C-ZC 100 Z M6
DAP2025 DAP-M8C-ZC 100 Z M8
DAP2030 DAP-M10C-ZC 100 Z M10
DAP2040 DAP-M6L-ZC 100 Z M6
DAP2045 DAP-M8L-ZC 100 Z M8
DAP2050 DAP-M10L-ZC 100 Z M10
STAINLESS STEEL AISI304
Code Reference F M
DAP3045 DAP-M8L-INOX 100 SS M8
DAP3050 DAP-M10L-INOX 100 SS M10
FAST KIT
Code Reference F M Nh mm CM Kg
DAP1060 DAP-FK8 100 E 8 600
DAP1065 DAP-FK10 100 E 10 950
DAP1070 DAP-FK12 100 E 12 1000
DAP1075 DAP-FK-M8x40 100 E 8x40 13 600
DAP1080 DAP-FK-M8x60 100 E 8x60 33 600
DAP1085 DAP-FK-M10x40 100 E 10x40 11 950
DAP1090 DAP-FK-M10x60 100 E 10x60 31 950
Electrolitically galvanized steel nut and plate with pre-fitted plastic insert.
Usable both with Strut 41x41 and 41x21, 2.5 - 1.5 mm thickness.
FITTING EXAMPLE
26
15. Ω STRUT
Accessories
Ω STRUT - Accessories
BUL - SCREWS AND WASHERS FOR STRUT COMPONENTS
Code Reference F M
BUL1000 BUL-VTE-M10-25 100 E M10x25
BUL1005 BUL-VTE-M10-30 100 E M10x30
BUL1010 BUL-R-10,5 500 E
BUL1015 BUL-RG-10,5 500 E
BUL1020 BUL-TP21 100 P
BUL1025 BUL-TP41 100 P
BAI - FASTENING BAND IN STAINLESS STEEL AND PREGALVANIZED
BUL-TP Code Reference F LxS
BAI1000 BAI-10x0,3-I 50mt SS 10x0.3 BAI1000 BAI1005
20
BAI1005 BAI-20x0,3-I 50mt SS 20x0.3 0.3 0.3
10
BAI1010 BAI-K10-I 20 SS Lock 10
7
BAI1015 BAI-K20-I 20 SS Lock 20
5
BAI1020 BAZ-12x0,8 S 10mt S 12x0.8-Ø5
BAI1025 BAZ-17x0,8 S 10mt S 17x0.8-Ø7 15 20
BAI1020 0.8 BAI1025
0.8
17
12
BFA - THREADED RODS
Code Reference F M L mm
BFA1000 BFA1-M6 10 E M6 1000
BFA1005 BFA3-M6 10 E M6 3000
BFA1010 BFA1-M8 10 E M8 1000
BFA1015 BFA3-M8 10 E M8 3000
BFA1020 BFA1-M10 10 E M10 1000
BFA1025 BFA3-M10 10 E M10 3000
BFA1030 BFA1-M12 10 E M12 1000
BFA1035 BFA3-M12 10 E M12 3000
STAINLESS STEEL
FVT1405 FVA-BF-M8-inox 10 SS M8 1000
FVT1410 FVA-BF-M10-inox 10 SS M10 1000
COUPLERS
Code Reference F M L mm
BFA1040 GBF-M6-30 100 E M6 30 30
BFA1045 GBF-M8-30 100 E M8 30
BFA1050 GBF-M10-30 100 E M10 30
STAINLESS STEEL
FVT1415 FVA-MF-8x30-inox 100 SS M8 30 M
FVT1420 FVA-MF-10x30-inox 100 SS M10 30
BRACKETS BFA1055
Code Reference F M/Ø CL Kg
BFA1065
BFA1055 FBF-O10 50 T 10.3 20
BFA1060 FBF-V10 50 T 10.3 20
BFA1065 FBF-RM8/M10 100 E M8/10
BFA1070 FBF-TM8/M10 100 E M8/10 BFA1060
BFA1070
27
16. Ω STRUT
CTN - FASTENING PLATES
Ω STRUT - Accessories
Code Reference F Ø
CTN1100 CTN-SO 50 T 7
CTN1100
CTN1105 CTN-SV 50 T 7
CTN1105
CTN - CHAIN
Code Reference F HxL Thk
mm
CTN1000 CTN-L-Box 50 mt E 13x4 1.6
CTN1005 CTN-M-Box 30 mt E 24x5 2.4
H
CTN1010 CTN-P-Box 20 mt E 26x6 3.0
CTN1015 CTN-M-Max 100 mt E 24x5 2.4 Sp
CTN1025 CTN1020 CTN-P-Max 100 mt E 26x6 3.0 L
CTN1025* CTN-GS 50 E
CTN1030** CTN-OM8 50 E M8 x20
CTN1030 * CTN1025 "S" hook - 3 mm thickness; ** CTN1030 M8 loop - 7 mm thickness - Ø 12 mm
FCP - POLYAMMIDE CONDUIT CLAMPS
Code Reference F Ø mm
FCP1001 PFC-1-S 12 S L=2mt
FCP1005 PFC-2-S 12 S L=2mt
FCP1010 FCP 12 100 P 12
FCP1015 FCP 15 100 P 15-16
FCP1020 FCP 18 100 P 18-20 20 12.2 1.75
FCP1025 FCP 22 100 P 22-25
28
FCP1030 FCP 26 50 P 26-28
10.2 15
FCP1035 FCP 32 50 P 32 35 35 30
FCP1040 FCP 35 50 P 35 FCP1005
FCP1045 FCP 40 25 P 40-42
FCP1050 FCP 48 25 P 48-50
FCP1055* FCP 8-36 100 P ,8-36
FCP1060** FCP 14-48 50 P 14-48
FCP1065** FCP 24-72 25 P 24-72
* FCP1001 Profile; ** FCP1005 Profile FCP1001
UBT - U-BOLT PIPE HANGER
Code Reference F Ø” M
UBT1000 UBT-1/2"- 6 50 E 1/2 6
UBT1005 UBT-3/4"- 6 50 E 3/4 6
UBT1010 UBT-1"- 6 50 E 1 6 Ø
UBT1015 UBT-1"1/4"- 8 50 E 1-1/4 8
UBT1020 UBT-1"1/2"- 8 50 E 1-1/2 8
UBT1025 UBT-2"- 8 50 E 2 8
UBT1030 UBT-2" 1/2 - 8 50 E 2-1/2 8
UBT1035 UBT- 3"- 8 25 E 3 8
UBT1040 UBT- 4"- 8 25 E 4 8 M
28
17. Ω STRUT
CPR - CHANNEL PIPE CLAMPS - ELEC RANGE
Ω STRUT - Accessories
Code Reference F Ø mm
min-max
CPR1000 CPR-E-050 50 E 15-16
CPR1005 CPR-E-075 50 E 21-23
CPR1010 CPR-E-100 50 E 26-29
CPR1015 CPR-E-125 50 E 33-36
CPR1020 CPR-E-150 50 E 39-42
CPR1025 CPR-E-200 50 E 52-55
CPR1030 CPR-E-250 50 E 64-67
CPR1035 CPR-E-300 25 E 77-80
CPR1045 CPR-E-400 25 E 102-105
For electrical pipes, plastic and steel
CPR - CHANNEL PIPE CLAMPS - HYDRO RANGE
Ø”
Code Reference F min-max
CPR2000 CPR-I-050 50 E 1/2 "
CPR2005 CPR-I-075 50 E 3/4"
CPR2010 CPR-I-100 50 E 1"
CPR2015 CPR-I-125 50 E 1 -1/4"
CPR2020 CPR-I-150 50 E 1-1/2"
CPR2025 CPR-I-200 50 E 2"
CPR2030 CPR-I-250 50 E 2-1/2"
CPR2035 CPR-I-300 25 E 3"
CPR2040 CPR-I-400 25 E 4"
For Hydraulic pipes
PCL - Ω PIPE "G" - EPDM INSULATED PIPE CLAMPS Technical characteristics
Electro galvanized stainless steel
Code Reference F Ø” Ø mm EPDM rubber insulation ("G" series)
Vibration reduction as per DIN 4109
PCL1000 PCL-G-3/8 100 E 3/8" 16-20 18 db ("G" series)
PCL1005 PCL-G-1/2 100 E 1/2" 20-24 Unloosable tightening screws thanks to special
plastic washers
PCL1010 PCL-G-3/4 100 E 3/4" 25-28 Operation temperature: -40/+110° ("G" series)
PCL1015 PCL-G-1 100 E 1" 32-35 Suitable for both vertical and horizontal assembly
M8/M10 combi nuts
PCL1020 PCL-G-1-1/4 50 E 1-1/4" 38-45 Breaking load: 6000N
PCL1025 PCL-G-1-1/2 50 E 1-1/2" 47-51
PCL1030 PCL-G-2 25 E 2" 60-64
PCL1035 PCL-G-2-1/2 25 E 2-1/2" 75-80
PCL1040 PCL-G-3 25 E 3" 87-92
PCL1045 PCL-G-4 25 E 4" 113-118
PCL1050 PCL-G-5 15 E 5" 138-142
PCL - Ω PIPE "NG" - NON-INSULATED PIPE CLAMPS
Code Reference F Ø” Ø mm
PCL1055 PCL-NG-3/8 100 E 3/8" 15-19
PCL1060 PCL-NG-1/2 100 E 1/2" 20-25
PCL1065 PCL-NG-3/4 100 E 3/4" 26-30
PCL1070 PCL-NG-1 100 E 1" 32-36
PCL1075 PCL-NG-1-1/4 50 E 1-1/4" 38-43
PCL1080 PCL-NG-1-1/2 50 E 1-1/2" 47-51
PCL1085 PCL-NG-2 25 E 2" 60-64
PCL1090 PCL-NG-2-1/2 25 E 2-1/2" 75-80
PCL1095 PCL-NG-3 25 E 3" 87-92
PCL1100 PCL-NG-4 25 E 4" 113-118
PCL1105 PCL-NG-5 15 E 5" 138-142
29