Low-mass stars spend millions of years as protostars collapsing under gravity before arriving on the main sequence. Massive stars collapse more rapidly, in as little as 10,000 years. Once on the main sequence, a star's lifetime depends on its mass - low-mass stars can spend billions of years fusing hydrogen, while high-mass stars may last only a few million years. Eventually a star exhausts its hydrogen fuel and expands as a red giant, then moves to the horizontal branch fusing helium before becoming an asymptotic giant branch star and ending its life as a planetary nebula or white dwarf.
A presentation on the first cosmic explosions and how the Universe started to make heavy elements, by Monash University's Professor Alexander Heger from the Faculty of Science, School of Mathematical Science.
A presentation on the first cosmic explosions and how the Universe started to make heavy elements, by Monash University's Professor Alexander Heger from the Faculty of Science, School of Mathematical Science.
This is an introduction to stars, including the basics of observing and classifying stars as well as their evolution and life cycle. This is a modification of a presentation I found online.
This is an introduction to stars, including the basics of observing and classifying stars as well as their evolution and life cycle. This is a modification of a presentation I found online.
'A star is a luminous sphere of plasma held together by its own gravity. The nearest star to Earth is the Sun. Many other stars are visible to the naked eye from Earth during the night, appearing as a multitude of fixed luminous points in the sky due to their immense distance from Earth. Historically, the most prominent stars were grouped into constellations and asterisms, the brightest of which gained proper names. Astronomers have assembled star catalogues that identify the known stars and provide standardised stellar designations. However, most of the stars in the Universe, including all stars outside our galaxy, the Milky Way, are invisible to the naked eye from Earth. Indeed, most are invisible from Earth even through the most powerful telescopes.'
Detailed Desription of Stars. What is a Star? , Classification of stars, Hertzsprung-Russel Diagram, Spectral Classes, Luminosity, Variable Stars, Composite Stars, Neutron Stars, Black Holes, Star Clusters, Supernovae, Binary Star, Chandrashekhar Limit, Limit Value Calculation Formulae, Applications of the limit, Tolman-Openheimer Volkoff Limit, About Subrahmanyam Chandrasekhar
1-Astronomers estimate that a low-mass red dwarf star like Proxima Cen.docxtodd991
1.Astronomers estimate that a low-mass red dwarf star like Proxima Centauri will shine on the main sequence for four trillion years. Speculate why this star would last so much longer than the estimated 600 Gyr.
2.The star Mira is 1.2 times the mass of the Sun and about 10,000 times more luminous than the Sun. Would Mira fit into the table above? Why or why not?
Solution
1. To understand why red dwarfs have such long lifespans, we’ll need to take a look at main sequence stars first, and see how they’re different. If you could peel back the Sun like a grapefruit, you’d see juicy layers inside.
In the core, immense pressure and temperature from the mass of all that starstuff bears down and fuses atoms of hydrogen into helium, releasing gamma radiation.
Outside the core is the radiative zone, not hot enough for fusion. Instead, photons of energy generated in the core are emitted and absorbed countless times, taking a random journey to the outermost layer of the star.
And outside the radiative zone is the convective zone, where superheated globs of hot plasma float up to the surface, where they release their heat into space.
Then they cool down enough to sink back through the Sun and pick up more heat. Over time, helium builds up in the core. Eventually, this core runs out of hydrogen and it dies. Even though the core is only a fraction of the total mass of hydrogen in the Sun, there’s no mechanism to mix it in.
A red dwarf is fundamentally different than a main sequence star like the Sun. Because it has less mass, it has a core, and a convective zone, but no radiative zone. This makes all the difference.
The convective zone connects directly to the core of the red dwarf, the helium byproduct created by fusion is spread throughout the star. This convection brings fresh hydrogen into the core of the star where it can continue the fusion process.
By perfectly using all its hydrogen, the lowest mass red dwarf could sip away at its hydrogen fuel for 10 trillion years.
2. No , Mira does not fit in that because of high mass.
.
I need this essay checked for correctness a proofread and w.pdfadianantsolutions
Ip noeinetedd t hoisu te isf spaoys scihbelec.k tehda nfokr ycoour.rectness. a proofread and whatever information isnt correct
SftshAplTbsgTtdeaAialaMiToSpotOsscIonttcitutooeonoygttssuuaroryrixn fhufu hh h ts u aaamupaer mss eaash a cpn it deatccacs c ee infc nbtrgttresastetsvtrtuhihmaaoe olt p e' e ns h ao-n s, e s s bu cl r si et f rp fH et et p erreorns ea e r ae eor r oi rw yaa uyp ed o 'xnr . lv a 'se,l t s ee r lc rmea lrsr o ,p,s sra rl i nl c y o f ote hap g icr e,s a al ar i e xy h z t ice u a e a a an rf upt c g v t eitr yotc,i n nt s heuses cz e ysuateo s gn l lchea coar s as osl e m b d d hhsars, t a a rueiunotedbles saas r ohttr eenop,o i o u e ta na ev sadncbor as e i e i , cenr ne .tagstaret p r e w s x icidrse r d on iioh cv u nt nlmd,aht t oncsIcr ne v t pov yt ht asetn,oaeu esn igh avcu,i io h n- e o d .n a f lr fptsg e r roi,dm n s nu g a r y rae tlosna n t d l g Tg v h iemohesh u oeh s c nett t ts - ttvm n t rtie t i uho e o e h iet rRm a a a n o i i a t nq uieeiteoteaioenao tui eae r oet l n e d p t o t gt n r g u w a d e u d nt b r np n u e t n hntohrl s e aa t e n us t o l he l m ss e m ia i h hsi ooe syb li ed g yg n t a n r t s tr yn ronetsnaovedl. e a i uws o aed e e aeei ia it t a ab uec oaa c t n o b s osie l T rg f thrr,Hgisnnfenetnt e cec lseu a tnl e t ol g fho o n l h h s evihaea,tieacrf o d ud c - n s l r l tn g soeru (fi e t fe e Rsre n e e i r ar d n o l nw ur g a H c a d f t po ie e l t e tb utr s o e snr d a a . s n ii l e mu o loa r la aihf a nn i n s - dlnefrtn a r s s fe p Thd t r R l r t rr c nit e a l is r gc l io e oit g e. ch g o o u tsh c n n a n s ia ah f he odssul ns) os o o nfh M e u men mee a u u p t t ng iaaamlg lfi ep os . o x d e ln intred m s n i c c s drk t r t a e e nt, s i e of y O u i mb t ha ae s n v at e s l l me md oaedt , rie se r tnhuogwr f s h t al emol a a o c u rg niawslestcaaeetcvieoocfaedt,cerh l t h tc r shf r rho icunoH e le y r rr a in r ve ed ve c d a e t e icalwce ao c k e ev e ft t t rl , r e u e f f, or a - e oyhimasf roetni l u u tra ot oe x e iR o i s o oem s i dai rlo t m .S n tr ar l n , o l s s s i f ha n en av tlr meu S s wre T as r ni i ubr t w i i a itnede ags e .s c .t r t oe ot sd alhexeuob p hg eia a e ne s nti sn tr Tr f a n w a n r adepaua t nlfose aeete r t n o .t s act e rhh t ic .o h f giy a lcd e iu-mn ov sgd h t f o c f .alocprdhtmeeofT f lta e r n y i al n y e i e ee si g klr ta y l oa to u fe so f s ov n h o d y eplh ro i tbo n o r x a t mlfsotnr os tin e e o hn d yehept er s aparair cps esca ns n f os m s m o egc ne r o. a r c ar la u u tifvaot s, a gc a utea vsl h t o f i b c u ten p s mt o l c eltda c wh n e gf lrtnhlerralaariteap.deeuohhleodercuntach. h u dae i hrsti sn r d r s f r eal ue s t g c ge esteu T aota osa e t ei t i di g d rtHc dlseo.in arolipn su a t i hstatoard e tb rve air uou d Weg h r i- n v u pdt i a ra o nc t v e a e s s sda Rw lssr ' h o e e . r l it c sv f i ee th su d. t a t p h l tt c re n o e n hhlf w lsTit ,a io g y de p u.
The sun generates about 400 billion billion
megawatts of power and it has done so for five
billion years. Nuclear fusion – combining lighter
atoms to make heavier ones – is what makes it
possible.
Register to explore the whole course here: https://school.bighistoryproject.com/bhplive?WT.mc_id=Slideshare12202017
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024Neo4j
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Stellar evolution by joey
1.
2. Stellar evolution
Star Birth as a Protostar
Stars are born within molecular clouds in the Galaxy. As the cloud collapses it fragments, and
multiple stars are formed. We see an open (galactic) cluster as a result. As the star collapses, its
overall density increases. As the density increases, the temperature and pressure at the center of
star increases a well, quite dramatically. At this point in the star's life, its luminosity is provided
by release of gravitational energy. Low-mass stars may take about a million years in this collapse
until they finally arrive on the main sequence. Massive stars are born from huge molecular
clouds. As protostars, they collapse much more rapidly than their low-mass counterparts, maybe
going through the whole process in 10,000 years. The profuse amount of radiation produced by
these O and B stars drive the dynamics and subsequent star formation of the whole cloud.
Mass
The mass of a protostar determines its place on the H-R diagram, its energy source, its ultimate
fate. Low mass stars sit on the main sequence at low luminosities, low temperatures; high mass
stars, at high luminosities and high temperatures. (Applying this to humans: it would be as if 6pound babies would always grow up to be lawyers; 8-pound babies, doctors; 10-pound babies,
Paris models; etc.) For purposes of this discussion, we will call stars with less than 3 times the
mass of the Sun "low-mass" stars. We will call stars with masses greater than 6 times the Sun's
"high-mass stars." Those stars with masses in the range of 3 - 6 times the Sun don't get paid
much attention here. Although they follow much of the story of a high-mass star, they do not get
to have the catastrophic explosion at the end. As you will see, though, they do become somewhat
rare objects
A Brown Dwarf
If the star does not have enough mass to create high enough
temperatures and pressures in its core, then it can never commence
hydrogen fusion. It may spend a brief time fusing deuterium (heavy
hydrogen), but ultimately its only source of luminosity is the heat
released during its gravitational collapse. It is doomed to cool for a very
long time and eventually turn into a cold mass. If Jupiter had about 80
times its current mass, we would have a glowing, brown dwarf in the
sky. (Image: NASA/STSCI/AURA)
(Back)
Low-Mass Stars: on the Main sequence
As we learned when we studied the Sun, energy generation takes place in the core via the protonproton cycle: fusing 4 hydrogen nuclei (protons) into 1 helium nucleus (2 protons, 2 neutrons),
3. releasing energy in the process. The famous equation that explains where energy comes from, E
= mc2, tells the whole story of how a little bit of mass can produce a whole lot of energy. Stars'
lifetimes on the main sequence depend on their masses. Low mass stars spend 10 billions years
or more, while high mass stars may stay for a mere 3-4 million years.
The star's luminosity while on the main sequence is described by the mass luminosity
relationship: L is proportional to M3.2. What this means is that even though high-mass stars have
much more fuel than low-mass stars, they go through it at a much, much greater rate. (An
analogy here on Earth: getting 70 mpg and having a 10-gallon tank versus getting 10 mpg and
having a 20-gallon tank. The efficient car can go 700 miles on a tank of gas, while the lowmilage car barely covers 200 miles.) While on the main sequence, the star is in hydrostatic
equilibrium: the outward pressure exerted by hot plasma--heated by the energetic photons
produced in the core--balances the inward pressure due to the force of gravity. For stars roughly
the mass of our star, outside the core lies the radiative envelope where the photons partake in a
"random walk". It takes roughly a million years for a photon to get from the core (as a gamma
ray) to the surface (as a visible light photon). The photon travels a mere 1 cm before being
scattered by an electron or an ion. Outside the radiative envelope lies the convection zone
(convective envelope). Heat is transferred here by the bulk movement of material. The top of the
convection zone displays granulation at the base of the atmosphere. The atmosphere (if the star is
similar to our Sun) has a photosphere, a chromosphere, and a corona. Many stars have huge
starspots on their surface that can be detected by telescopes here on Earth.
Red Giant Star
This field of stars in the constellation of Sagittarius ( Courtesy Hubble
Heritage Team and NASA) shows stars of many colors, including those
that are orange and red. These stars are the "red giant stars."
The cores of red giant stars are composed primarily of helium, ashes
from the billions of years of fusion of hydrogen. The temperature in the
core is not yet high enough to fuse elements heavier than helium.
Without any support from energy generation, the helium core contracts.
Here is where we can bring in our basic knowledge of physics: the
material in the outer core has gravitational potential energy (GPE).
When the core contracts, this GPE releases a profusion of energy--kinetic and thermal. The heat
from this contraction causes the hydrogen in a shell surrounding core to ignite and we get
"hydrogen-shell fusion.". The core will continue to contract and release energy until it cannot
contract any further without squeezing the electrons together. The core is now supported by
electron degeneracy--no two electrons can exist in the same state, and resist doing so with
enough force to halt the collapse.
The fusion of hydrogen to helium in the shell and the radiation pressure that results supports the
rest of the star from gravitational collapse. The hydrogen shell produces a lot of energy. In a
simplified interpretation of why stars turn into red giants (astronomers aren't really sure why this
happens), we assume that because the hydrogen shell is closer to the surface of the star and the
4. luminosity of that shell is very high, the outer layers of the star expand. THE STAR BECOMES
A RED GIANT.
The star itself does not gain or lose mass (at least it has not lost much mass up to this stage)
during its whole life, unless it is in a close-binary system where the stars are so close they are
influencing each other dramatically. But, as the hydrogen-fusing shell works its way out through
the interior of the star, it continuously "rains" helium ash onto the core of the star. The core is
slowly gaining mass at the expense of the rest of the star. This extra mass is squeezing the core,
raising the temperature there and steadily trying to raise the density.
Helium Flash! and Horizontal Branch
At left is a Hubble Space Telescope of the globular cluster 47 Tucanae.
The large number of red giant stars in this cluster is noticeable by the
distinctly yellowish-orange color of these stars. (Image courtesy W.
Keel and NASA)
Helium core fusion starts in the core of a red giant when the core
temperature and density reaches 108 K and 108 kg/m3. As a red giant,
the core was supported by electron degeneracy. Degeneracy is a strange
state of matter indeed. Normal rules of physics do not apply here. A
degenerate stellar core does not follow normal gas laws that dictate if something shrinks, the
pressure and temperature rise, or if something expands, its pressure and temperature decreases.
Once there is enough mass dumped on the core from the rest of the star, fusion starts in a
runaway explosion of the entire core simultaneously. The red giant experiences a "helium flash."
Unfortunately for us, we cannot see this flash; in fact, the rest of the star doesn't even know it
happened until there appears to be a stable source of radiative support again. The degeneracy in
the core disappears since fusion is now taking place. The star is supported by the energy
produced via helium-to-carbon fusion in the core. The luminosity of the star decreases; the
temperature increases. The star is in a second zone of stability, the horizontal branch, that will
last a few billion years.
Not all stars are totally stable in this region of the H-R Diagram. There are exceptions, stars that
pulsate. These stars are called RR Lyrae Stars, and we will be getting better aquainted with these
variable stars and what they have revealed about our galaxy in the lab: RR Lyrae Stars and the
Distance to M4.
Asymptotic Giant Branch (AGB)
Eventually, over a time frame shorter than the hydrogen-fusion stage,
the core of the horizontal-branch star will eventually run out of helium
to fuse into carbon. Fusion shuts down, and the core starts to contract,
having no means of supporting itself. This small, contracting core is
made of carbon ash. The gravitational contraction releases the energy
5. that had been stored as potential energy, igniting a helium-fusing shell around it. Luminosity
continues to be generated by the shrinking core until it again cannot contract anymore due to the
onset of electron degeneracy. Meanwhile, back to the rest of the star: the rest of the star expands
again and becomes an asymptotic giant branch star, almost retracing its path as a red giant star
(see the link to the H-R diagram for the globular cluster 47 Tucanae shown to the right). The
helium fusing shell surrounding the core rains down "carbon" ash. The luminosity produced by
the helium-to-carbon fusion in this shell ignites a hydrogen-to-helium fusing shell on the outside
of it. This is called a double-shell-burning star. The hydrogen shell is raining down helium ash to
the helium-burning shell, while the helium shell is raining down carbon ash to the core. The two
H and He fusing shells support the outer parts of the star. Outer atmosphere expands even more
than before.
Planetary Nebula
Planetary Nebula Mz 3 (Courtesy Hubble Heritage Team
NASA)
and
Energy production in the star will eventually stop as the Heand Hfusing shells work their way through the star. At this stage,
the upper
envelopes and the atmosphere are extremely unstable. Large
pulsations in the star have driven almost half of the star's
material
into interstellar space, leaving behind only the once-active stellar core. This carbon core,
supported now strictly by electron degeneracy, is extremely dense: 1010 kg/m3. The gaseous
object surrounding the core is called a planetary nebula. It glows because of the energetic,
ionizing photons produced by the now-exposed, extremely hot core.
(Back)
White Dwarf
The star has finally reached the twilight of its years and has become a white dwarf: an
immensely hot, Earth-sized object. What's left of a once magnificent star is doomed to a slow,
slow death. What we see is the remnant of the core of the star. Its fate is to cool for billions and
billions of years until it becomes a black, ultra-cold cinder. The carbon and other elements it
contains will never be a part of the life of a star again.
Massive white dwarfs are produced by stars whose mass lies between roughly 3 and 6 times the
mass of the Sun. These white dwarfs contain mostly oxygen and neon, as well as some carbon,
representing the fact that the star they came from was able to fuse elements slightly heavier than
helium. These white dwarfs are rare as their mass lies right on the limit for electron degeneracy
to be able to support the object from collapsing. If the white dwarf has a mass of slightly more
than 1.4 times that of the Sun (the Chandrasekhar limit), it collapses into a neutron star.
What this means for our star, Sol, and thus us
6. As you view the life track
(evolutionary track) for the Sun,
think about what this means for
Earth and the life on it. Take it
step by step (say, in 1-billion
year steps!) and consider what
will happen as the Sun's
luminosity, and thus its
brightness increases. On the
zero-age-main-sequence, the
luminosity of the Sun was
roughly 70% of what it is today.
The Sun has steadily been
increasing in luminosity. There
are fossil records that provide
evidence that life in the form of
very simple one-celled
organisms got started
approximately 3 billion years
ago, almost immediately after
conditions became favorable,
after the Earth cooled down and
the oceans were formed. Life
has had to adjust to an increase
in luminosity, can life continue
to do so? What will we do when
it is 90 degrees in Seattle in the
middle of winter? As the oceans
evaporate, the water vapor adds
to the greenhouse effect of the
atmosphere, causing an increase
in the trapping of infrared
radiation near the surface of the
Earth. Solar radiation dissociates
the water molecules, the hydrogen escapes, the oxygen reacts with other elements; the water is
permanently lost. Will the human race be able to adapt on the short-term and be ready to pack
bags and move out in the long-term? We could steadily move to the outer parts of the solar
system as the Sun increases in luminosity, delaying the ultimate "move." There is plenty of water
ice on the moons of the giant planets, perhaps we will be able to build shelters that can protect us
from the Sun's harmful radiation. At the velocities possible with current propulsion systems, it
would take 100,000 years or more to even reach the nearest star. We would need to populate
interstellar space, with generations upon generations knowing only the mother ship and the cold,
dark reaches in between the stars.
7. True-False Quiz
(Back to top)
Massive Protostars:
NGC 7635, the Bubble Nebula, is 10 light-years across, more than
twice the distance from the Earth to the nearest star. The nebula is made
up of an expanding shell of glowing gas surrounding a hot, massive star
in our Milky Way galaxy. This shell is being shaped by strong stellar
winds of materials and radiation produced by the bright star at the left,
which is 10 to 20 times more massive than our Sun. These fierce winds
are sculpting the surrounding material, composed of gas and dust, into
the curve-shaped bubble. (Hubble Heritage and NASA)
High Mass Stars: On the Main Sequence
Massive stars start their lives much like their solar counterparts, only
they tend to over-do everything! They truly live fast and furious lives.
In addition to the proton-proton cycle, massive stars can also produce
energy by converting hydrogen to helium via the C-N-O cycle. Interior
pressures and temperatures are so great that helium and carbon are
often fused along with hydrogen, fusion isn't limited to just one process.
(Image courtesy of J. Hester and NASA)
One of the most massive stars ever observed, being about 150 times
more massive than the Sun (or, theoretically, about as massive as any star can ever be), Eta
Carinae is prone to massive outbursts. The most massive stars, like Eta Carinae, produce so
much luminosity, that they literally blow much of their outer layers away early on in life. These
stars have episodes where they brighten by many magnitudes and spew material into interstellar
space. We expect this particular star, which may in fact be a binary system, to really "blow its
top" some day.
(Back)
Evolution Away From the Main Sequence
Massive stars spend very little time on the main sequence. For the most massive stars, this is
only a few million years. These stars move to luminous red supergiant region as hydrogen is
exhausted in core. The core contracts slightly, but since the star already has high enough
temperatures to fuse helium to carbon via the triple-alpha process (review Section 13.4 of the
text), it moves to this stage relatively smoothly. Along with a helium burning core, a hydrogento-helium fusing shell just outside of the core may also be present.
8. (Back)
Helium Depletion in the Core
The star has been primarily supported by helium-to-carbon fusion, but
the helium has run out. The core again constracts. Some of the carbon
and oxygen get fused into neon. As each new fusion process cycles to
another, the star changes its temperature and moves from a red
supergiant to a blue supergiant, and perhaps back to red again. At this
stage in the star's life it is basically in hydrostatic equilibrium, although
fusion in the core becomes dramatically dependent upon the
temperature there. Any slight changes in the temperature results in
extreme changes in the fusion rate. The carbon-to-oxygen-to-neon
fusing core is surrounded by helium-to-carbon fusing shell which is surrounded by a hydrogento-helium fusing shell. As the fusion rates increase and decrease, the star's atmosphere responds.
It is not unusual to find a red supergiant that changes its luminosity by 100 or more times (5
magnitudes) at this stage in its life. The image at the left is of the red supergiant, Betelgeuse, in
Orion. (Image courtesy of A. Dupree and NASA)
(Back)
Middle- and Old-Age for High Mass Stars
For these stars having masses originally greater than 6 times the Sun's, their outrageous
"partying" isn't over yet. High-mass stars proceed to fuse oxygen to neon, neon to magnesium,
magnesium to silicon, and finally silicon to iron (with intermediate steps along the way). Each
stage leaves a "shell" of the previous stage fusing above it, raining ash onto the present core.
Each stage happens progressively faster than the previous ones. The star is now caught in the
cycle of depletion of one element to fuse in its core, contraction of the core, heating, fusion of
the next heavier element, igniting of another fusing shell. Star "loops" across high-luminosity
part of the HR Diagram as each stage progresses.
When does fusion stop? The element iron has a particularly unique characteristic: its nucleus is
the most tightly bound of any atom. Energy has been released as fusion as progressed from
hydrogen to iron, but once an iron core is produced, fusion stops. No energy is forthcoming from
fusing iron into a heavier element. Beyond iron, energy can be obtained only by fission. The star
suddenly finds itself without any means of support against the force of gravity at all!
(Back)
The Mother of All Explosions: The Death of Massive Stars
With no further support being provided for the star, gravity must win.
The star starts to implode. The energy stored as gravitational potential
energy is released suddenly. This energy results in the nuclei of the
elements being split apart in a process called photodisintegration. All
9. the millions of years the star spent in fusing heavier and heavier elements was for naught. Even
more energy disappears in this process--since energy was produced during the fusion, energy is
needed for the splitting. The collapse accelerates as there is even less energy available for
support. It gets worse! Protons and electrons are crushed together under extreme, unbelievable
really, temperatures and pressures and form neutrons. Neutrinos are also formed in this merging,
carrying away even more energy directly from the star. Electron degeneracy simply cannot act to
support the core. The density of the core has now reached 1015 kg/m3. Just as a rubber ball will
compress before it bounces back, the stellar core overshoots and rises to an astounding 1018
kg/m3. (There just are not enough superlatives in the English language to describe what is
happening inside the dying star!) The core now rebounds with a vengeance, ricocheting shock
waves and material back into interstellar space. This whole process takes place in less time than
it took you to read this paragraph.
Here is a simple animation (490 kb) depicting the aging of a massive star. Note that after each
stage of fusion in the core, the core shrinks, generates enough heat and pressure to start the next
stage of fusion to heavier elements and ignites another fusion shell. The gradual increase in the
frame-rate is meant to depict the acceleration of each stage as heavier and heavier elements are
fused. Then, the final stage when the core is fused to iron. The star implodes from all directions
and then rebounds in a humongous explosion.
Supernova 1987a (Image courtesy Hubble Heritage and NASA) provided observational support
to the theory of these explosions. The Earth received a pounding of neutrinos first, although only
a small fraction of the billions and billions passing through the Earth were detected. Since
neutrinos do not interact with matter, they were able to escape the collapse first. The light from
the explosion followed shortly afterward.
10. Neutron Stars
The Crab Nebula is an example of what happens to the material from
the supernova explosion. This supernova explosion happened in 1054
AD; the material is still speeding away from the neutron star left behind
at 1000's of kilometers per second. Massive stars give almost all of their
material back to interstellar space. Out of the 6-plus solar masses the
star originally was born with, only between 1.4 and 3 solar masses
remain in the neutron star (we deal with stellar black holes later). The
neutron star is supported by "neutron degeneracy," a state similar to
electron degeneracy, only much, much more dense. What remains of
the star is essentially one huge atomic nucleus made of neutrons alone,
an object about the size of the Earth but with an unbelievably high density.
As the star explodes, there is also an abundance of neutrons spewing away from the neutron star.
These neutrons run into nuclei of atoms and build up. When a neutron decays into a proton, a
heavier element results. This process occurs very rapidly, with neutrons building up faster than
they decay. In this way, the heaviest elements found on the periodic chart are formed--we can
11. think of no other way for them to be produced. (Think about the definition of alchemy--if
humans could turn baser elements into gold, we would have done it by now.) In addition to this
rapid neutron capture, the shock waves proceed through the expanding stellar material bringing
densities, pressures, and temperatures high enough to fuse elements, and to force helium nuclei
into other nuclei, building up the periodic chart even faster. Thus, the formation of the elements
found in the Universe is completed.
(Back)
Pulsar or Neutron Star--What's the Difference?
All pulsars are neutron stars, but not all neutron stars are pulsars. Observationally, a pulsar is an
object that emits flashes of light several times per second or more, with near perfect regularity.
Theoretically, pulsars are rapidly rotating neutron stars. What's the strongest evidence we have
that pulsars are neutron stars? No massive object, other than a neutron star, could spin as fast as
we observe pulsars spin.
(Back)
Back to the Interstellar Medium
The gold you wear, the nickel in our coins, the uranium in the ground, silver, mercury, iron,
copper, platinum--all were once atoms in a stupendous explosion. Carbon, nitrogen, oxygen,
silicon, and the other essential chemicals for life were also produced in a supernova. Thus are we
truly the children of the stars.
An Interlude: The Periodic Chart and the Origin of the Elements
(Back)
Blackholes: The Ultimate Abyss
Blackholes and their environment are so fascinating that they get a chapter all to themselves.
You will have to wait until the next lesson to learn more about these intriguing and egnimatic
objects.
(Back)
RR Lyrae and Cepheid Variable Stars
RR Lyrae and Cepheid variable stars are one of the most important steps in the Distance Scale of
the Universe.
The stars lie in a region of the H-R diagram where stars are intrinsically variable.
Variability is a normal part of their evolution.
Variability is due to the ionization of helium and hydrogen.
12. RR Lyrae stars are old, low mass, stars occupying part of the horizontal
branch. They are primarily found in the halo of galaxies, particularly
the globular clusters. The average apparent magnitude of a star, say star
#42 in the globular cluster M4, is 13.5. If we assume an absolute
magnitude for all RR Lyrae stars is 0.75, what is the distance to Star
#42 and thus M4?
The distance to M4 is difficult to determine for the simple reason that it
lies in a part of the Galaxy that is heavily obscured by dust. Click on
the images to the left to see a larger view of each one. The globular
cluster M4 is marked on the close-up image. Note that the close-up has
been rotated clockwise by about 90 degrees. It is easy to see the long
pillars of dust in the region. Astronomers estimate that the stars in M4
are dimmed by about 1 magnitude. The bright, yellowish star in these
images is the red supergiant Antares.
Here are two actual light curves of RR Lyrae stars. The one of the left is of the prototype star:
RR Lyrae itself, with a period of 0.5668 days. The one shown on the right is a newly discovered
one (2000), the discovery made by Dr. Scott Anderson and then graduate student Armin Rest
using imaging data from the Sloan Digital Sky Survey. The plot was made from data taken by
undergraduates in astronomy using the Monashtash Observatory in Ellensburg. The period for
this star is 0.48588 days, an extremely precise determination. Note that the light curves measure
the change in the apparent magnitude of the star and note also the similarity in the way the light
curves look. (The data are not shown over time; rather, astronomers do a bit of an "accordion"
calculation that essentially folds all of the data so that 1.5 periods are emphasized.)
Cepheid stars are massive stars that are transversing the top of the H-R diagram as they evolve.
They are usually found in the disks of galaxies, in regions of active star formation.
Although Cepheid variable stars are intrinsically much brighter than RR Lyrae stars, they are
often hard to observe because they lie in crowded regions. RR Lyrae stars are in uncrowded
13. regions, and thus more ideal for observing; however, they are intrinsically a lot less luminous
than Cepheids. Thus, there is a limitation as to how far we can actually observe these stars -galaxies in the local group are fine, but not much farther than approximately 2 million light
years, and even at that distance the stars are about 25th magnitude! (You can use the magnitude
equation to calculate this yourself.)
14.
15. Visayas
The indigenous groups in the Visayas –mostly in Mindoro – are called Mangyan. Again, there are many ethnic groups such as the Tadyawan,
Tagbanwa, Palawano, Molbog and Kagayanan.
Mindanao
There is some differentiation of the indigenous people in Mindanao. The Moro and the Lumad. The Moro practice Islam and the Lumad do not.
Moro is Spanish for the word Moor. Lumad means indigenous or native.
The Moro include the Maguindanao, Maranao, Tausug and Samal. The Lumad include the Manobo, Bagobo, Tiruray, Tiboli and Mandaya. I've
only mentioned a handful of the larger Filipino ethnic groups and Tribes in the Philippines. There are so many groups and tribes with different
languages, religions and islands they do still maintain a single national identity - Filipino.
It really is the same around the world. In the United States I may be a midwesterner or a Chicagoan. An Illinoisan or a northsider. Despite all
these smaller divisions and groupings I'm still considered American!
Family includes grandparents, aunts, uncles, cousins, first cousins, second cousins and so on. In my father's hometown in Balete, Aklan he has 4
siblings and 4 first cousins that live within a 1 mile radius of one another.
They see and spend time with each other on a regular, usually daily, basis. It is commonplace for at least 3 generations of a family to live in one
home or for several generations to live on a single piece of family land.
Filipinos go to great lengths to show their hospitality to others. Universally, being a good host by ensuring one's comfort -having enough to eat
or drink- is being hospitable. In the Philippines it is not unusual for a host to offer their guest their own bed to sleep in!
0 Speaker: 1 - 1,000 Speakers: 1, 000 or More:
EXTINCT ENDANGERED STABLE
PHILIPPINE
LANGUAGE
A
Adasen
Agta, Alabat Island
Agta, Camarines
Norte
Agta, Casiguran
Dumagat
Agta, Central
Cagayan
Agta, Dicamay
Agta, Dupaninan
Agta, Isarog
Agta, Mt. Iraya
Agta, Mt. Iriga
Agta, Umiray
Dumaget
Agta, Villaviciosa
Agutaynen
Alangan
NUMBER OF
ALTERNATE NAMES
SPEAKER
STATUS
4,000
30
Itneg Adasen, Addasen Tinguian, Addasen
Alabat Island Dumagat
Stable
Endangered
150
Manide, Abiyan
Endangered
610
Casiguran Dumagat
Endangered
780
Labin Agta
Endangered
0
1,400
6
150
1,500
Dicamay Dumagat
Dupaningan Agta, Eastern Cagayan Agta
East, Inagta of Mt. Iraya, Itbeg Rugnot, Lake Buhi, Rugnot of Lake Buhi East
Mt. Iriga Negrito, San Ramon Inagta, Lake Buhi West
Extinct
Stable
Endangered
Endangered
Stable
3,000
Umirey Dumagat, Umiray Agta
Stable
0
15,000
7,690
Agutaynon, Agutayno
Extinct
Stable
Stable
16. Alta, Northern
Alta, Southern
Arta
Ata
Ati
Atta, Faire
Atta, Pamplona
Atta, Pudtol
Ayta, Abellen
Ayta, Ambala
Ayta, Bataan
Ayta, Mag-Anchi
Ayta, Mag-Indi
Ayta, Sorsogon
Ayta, Tayabas
B
B’laan, Koronadal
B’laan, Sarangani
Balangao
200
1,000
15
4
1,500
300
1,000
710
3,000
1,660
500
8,200
5,000
18
0
Edimala, Ditaylin Dumagat, Ditaylin Alta Baler Negrito
Pugot, Kabuluwen, Kabuluwan, Kabuluen, Kabulowan, Ita, Baluga
150,000
90,800
21,300
Balangingi
80,000
Korondal Bilaan, Tagalagad, Biraan, Baraan, Bilanes
Balud, Bilaan, Tumanao
Balangaw, Farangao, Balangao Bontoc
Western Mindanao, Sulu Archipelago Northeast of Jolo, Islands and Coastal Areas of
Zamboanga Coast Peninsula and Basilan Island. Possibly on Luzon and Palawan. Northern Sama
on Luzon at White Beach near Subic Bay; Lutangan in Western Mindanao, Olutangga Island.
Also in Sabah, Malaysia.
Bantoanon
Batak
Bicolano, Albay
Bicolano, Central
Bicolano, Iriga
Bicolano, Northern
Catanduanes
Bicolano, Southern
Catanduanes
Binukid
Bolinao
Bontoc, Central
Buhid
Butuanon
C
Caluyanon
Capiznon
Cebuano
Chavacano,
Caviteño
Chavacano,
Cotabateño
Chavacano,
Davaweño
Chavacano,
Ermitaño
Chavacano,
Ternateño
Chavacano,
Zamboangueño
200,000
200
1,900,000
2,500,000
234,000
Inati
Southern Atta
Northern Cagayan Negrito
Northern Cagayan Negrito
Aburlen Negrito, Ayta Abellen Sambal, Abenlen
Ambala Sambal, Ambala Agta
Mariveles Ayta, Bataan Sambal, Bataan Ayta
Mag-Anchi Sambal
Mag-Indi Sambal, Indi Ayta, Baloga
Endangered
Endangered
Endangered
Endangered
Stable
Endangered
Endangered
Endangered
Stable
Stable
Endangered
Stable
Stable
Endangered
Extinct
Stable
Stable
Stable
Stable
Bikol
Rinconada Bicolano
Stable
Endangered
Stable
Stable
Stable
122,000
Pandan
Stable
85,000
Virac
Stable
100,000
50,000
540,000
8,000
34,500
Binukid Manobo, Bukidnon, Binokid
Bolinao Sambal, Bolinao Zambal, Binubulinao
Bontoc Igorot, Bontoc
Bukil, Batangan, Bangon
Stable
Stable
Stable
Stable
Stable
30,000
639,000
21,000,000
Caluyanen, Caluyanhon
Capiseño, Capisano
Sebuano, Bisayan, Visayan, Binisaya, Sugbuanon, Sugbuhanon
Stable
Stable
Stable
27,841
Caviteño
Stable
5,473
Cotabateño
Stable
59,058
Davawenyo Zamboanguenyo
Stable
0
Ermiteño
Extinct
3,750
Ternateño
Stable
155,000
Chabakano Zamboangueño
Stable
Beifang Fangyan, Guanhua, Guoyu, Hanyu, Mandarin, Northern Chinese, Putonghua, Standard
Chinese
Endangered
Minnan, Southern Min
Stable
Cantonese, Gwong Dung Waa, Yue, Yueh, Yuet Yue, Yueyu
Stable
Cuyo, Cuyono, Cuyunon, Kuyonon, Kuyunon
Stable
Davaoeño, Davaweño, Matino
Stable
550
Chinese, Mandarin
(Philippines)
592,000
Chinese, Min Nan
(Philippines)
9,780
Chinese, Yue
(Philippines)
Cuyonon
123,000
D
Davawenyo
147,000
E
3,400,000
English
(Philippines)
F
Finallig
5,000
G
Ga'dang
6,000
Gaddang
30,000
Palawan Batak, Tinitianes, Babuyan
Stable
Eastern Bontoc, Kadaklan-Barlig Bontoc, Southern Bontoc
Stable
Baliwon, Gadang, Ginabwal
Cagayan
Stable
Stable