26 сентября 2014 года в рамках конференции "Дети и ВИЧ: проблемы и перспективы" фонд "ФОКУС-МЕДИА" при поддержке ABBVIE провел круглый стол по раскрытию статуса детей и консультированию семей, затронутых ВИЧ.
26 сентября 2014 года в рамках конференции "Дети и ВИЧ: проблемы и перспективы" фонд "ФОКУС-МЕДИА" при поддержке ABBVIE провел круглый стол по раскрытию статуса детей и консультированию семей, затронутых ВИЧ.
Snowman Earrings
Materials:
*2 copper headpins – around 2,5 inch long
*90 cm (35,43’’) of 0,3 mm wire in diameter/ 28 or 29 gauge -cut into 2
Even pieces - 45 cm (17,7’’) each
* 2 rondelle beads - size 3mm x 4mm
* 2 white beads - size around 6mm
* 2 crackle beads - size around 10mm
* 2 copper beads - size around 2.5mm
Tools:
*round-nose pliers
*flat-nose pliers
step 1. String your beads onto the headpin.
step 2. Now take the thin wire and wrap it around the pin.
step 3. Now put the wire under the beads – as close to them as you can, and wrap the wire around the pin.
step 4. You have to repeat step 2 and 3 few times – wrapping wire around the pin
– under and above the beads. You can smooth wrapped part by squeezing it
gently with pliers.
step 5. Now cut the rest of the wires, and move beads to the bottom of the pin.
step 6. Squeeze wires gently, using your pliers as shown on the photos - creating nice "snowmen" shape.
step 7. Short the headpin if you need to and bend it creating little hook, then close the hook.
step 8. Now you have to repeat all steps to make
second earring, then attach ear wires.
Earrings are ready to wear!
Snowman Earrings
Materials:
*2 copper headpins – around 2,5 inch long
*90 cm (35,43’’) of 0,3 mm wire in diameter/ 28 or 29 gauge -cut into 2
Even pieces - 45 cm (17,7’’) each
* 2 rondelle beads - size 3mm x 4mm
* 2 white beads - size around 6mm
* 2 crackle beads - size around 10mm
* 2 copper beads - size around 2.5mm
Tools:
*round-nose pliers
*flat-nose pliers
step 1. String your beads onto the headpin.
step 2. Now take the thin wire and wrap it around the pin.
step 3. Now put the wire under the beads – as close to them as you can, and wrap the wire around the pin.
step 4. You have to repeat step 2 and 3 few times – wrapping wire around the pin
– under and above the beads. You can smooth wrapped part by squeezing it
gently with pliers.
step 5. Now cut the rest of the wires, and move beads to the bottom of the pin.
step 6. Squeeze wires gently, using your pliers as shown on the photos - creating nice "snowmen" shape.
step 7. Short the headpin if you need to and bend it creating little hook, then close the hook.
step 8. Now you have to repeat all steps to make
second earring, then attach ear wires.
Earrings are ready to wear!
El proceso asistencia hasta la llegada al Hospital tiene pocas herramientas.
Patente de una dispositivo de garantiza la seguridad a los primeros intervinientes en los accidentes de paciente politraumatizado grave en su proceso de rescate
How fit is your brand?
Brands must earn their wings for their positioning in the market, and then stay in shape and be vital. That’s why we designed a Brand Bootcamp, an interactive brand session, in which we strip and build on specific issues within the complex brand challenges that you are facing.
In this case we were invited by the Dutch Olympic Committee*Dutch Sports Federation (NOC*NSF) to organize a brand bootcamp. In an interactive setting we have discussed our outsiders point of view, our brand analysis, ideas, inspiration and conclusions. We hope our inspiration serves as a starting point for the further development of the NOC*NSF brand.
DC test systems are used to test components and complete systems found in electrical power supply systems and operating on DC voltage. POWERHV DC voltage test systems fulfill the requirements of IEC 60060-1.
The DC voltage test systems can be equipped with polarity reversal.
Applications
High-voltage DC testing for transformers, cables, bushings, switchgears, etc.
Wet and pollution testing
DC current measurements at high-voltage potential
For use indoors and outdoors or modular system for onsite testing
For test and research of DC transmission line corona, radio interference, pollution flashover.