SMAC CB135 Series Electric Cylinder
•
0 likes•49 views
The CBL35 Series electric cylinder was designed to improve cycle rates, uptime, and work environments in packaging industries. It can cycle at over 2000 cycles per minute with accelerations up to 50G, and is fully programmable for force, position, and velocity. This precise motion control reduces machine downtime and increases throughput.
![www.smac-mca.com
CBL35 Series
CBL35 Series
Electric Cylinder
Designed to overcome problems with existing conventional devices in the
packaging industry with improved cycle rate, uptime, and work environment.
For end users and machine manufacturers.
The CBL35 offers cycle life well beyond 100 million cycles. It achieves
accelerations up to 50G, enabling the actuators to cycle at rate >2000 CPM.
Fully programmable in force, position and velocity, it can be adjusted in
seconds and does not require recalibration. Precise motion control has
inherent force feedback capabilities. This results in a substantial saving of
time and cost, and increases throughput due to a significant reduction in
machine down time. Cleaner and quieter operation with no exhaust air.
Dimensions [mm] Ø35 x 95 (depending on stroke)
Stroke [mm] 10, 25 +1/-0
Acceleration [G] up to 50G (zero payload)
Peak Force [N] 15 @1.5A (10mm stroke, 24VDC)
14 @1.5A (25mm stroke, 48VDC)
Encoder Resolution [µm] 5 (standard), 1 (option)
SMAC’s Patented ‘Soft-Land’ Technology
MovingCoilActuators
Applications
Leak DetectorNitrogen DosingRejectingSorting
Diverting
Labelling Filling Assemblysales@electromate.com
www.electromate.com
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](https://image.slidesharecdn.com/smaccbl35serieselectriccylinderbrochure-170503161605/85/SMAC-CB135-Series-Electric-Cylinder-1-320.jpg)
![Specifications subject to change without notice.
5807 Van Allen Way, Carlsbad, CA 92008
+1 760-929-7575 info@smac-mca.com
Regional Distributor
DIMENSIONS (CBL35-010-5 model）
SPECIFICATION
PART NUMBERING
MODEL SERIES STROKE VOLT ENCODER CABLE
C B L 3 5 - 0 1 0 - - 3 - M O D
5 = 24 vdc SINGLE COIL 5= 5.0µm 3= Flying Lead
7 = 48 vdc SINGLE COIL 1= 1.0µm
Model
Voltage
[DC]
Size:
LxWxH
[mm]
Stroke
[mm]
Max.
Force
[N]
Continuous
Force [N]
Force
Constant
[N/A]
Max.
Current
[Amp]
Moving
Mass
[kg]
Weight
[kg]
CBL35-010-5 24 Ø35 x 95 10 15 6 9 1.5 0.045 0.45
CBL35-025-7 48 Ø35 x 110 25 14 5.6 8.8 1.5 0.05 0.5
sales@electromate.com
www.electromate.com
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
More Related Content
Similar to SMAC CB135 Series Electric Cylinder
Similar to SMAC CB135 Series Electric Cylinder (20)
More from Electromate
More from Electromate (20)
Recently uploaded
Recently uploaded (20)
SMAC CB135 Series Electric Cylinder
- 1. www.smac-mca.com CBL35 Series CBL35 Series Electric Cylinder Designed to overcome problems with existing conventional devices in the packaging industry with improved cycle rate, uptime, and work environment. For end users and machine manufacturers. The CBL35 offers cycle life well beyond 100 million cycles. It achieves accelerations up to 50G, enabling the actuators to cycle at rate >2000 CPM. Fully programmable in force, position and velocity, it can be adjusted in seconds and does not require recalibration. Precise motion control has inherent force feedback capabilities. This results in a substantial saving of time and cost, and increases throughput due to a significant reduction in machine down time. Cleaner and quieter operation with no exhaust air. Dimensions [mm] Ø35 x 95 (depending on stroke) Stroke [mm] 10, 25 +1/-0 Acceleration [G] up to 50G (zero payload) Peak Force [N] 15 @1.5A (10mm stroke, 24VDC) 14 @1.5A (25mm stroke, 48VDC) Encoder Resolution [µm] 5 (standard), 1 (option) SMAC’s Patented ‘Soft-Land’ Technology MovingCoilActuators Applications Leak DetectorNitrogen DosingRejectingSorting Diverting Labelling Filling Assemblysales@electromate.com www.electromate.com ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By:
- 2. Specifications subject to change without notice. 5807 Van Allen Way, Carlsbad, CA 92008 +1 760-929-7575 info@smac-mca.com Regional Distributor DIMENSIONS (CBL35-010-5 model） SPECIFICATION PART NUMBERING MODEL SERIES STROKE VOLT ENCODER CABLE C B L 3 5 - 0 1 0 - - 3 - M O D 5 = 24 vdc SINGLE COIL 5= 5.0µm 3= Flying Lead 7 = 48 vdc SINGLE COIL 1= 1.0µm Model Voltage [DC] Size: LxWxH [mm] Stroke [mm] Max. Force [N] Continuous Force [N] Force Constant [N/A] Max. Current [Amp] Moving Mass [kg] Weight [kg] CBL35-010-5 24 Ø35 x 95 10 15 6 9 1.5 0.045 0.45 CBL35-025-7 48 Ø35 x 110 25 14 5.6 8.8 1.5 0.05 0.5 sales@electromate.com www.electromate.com ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com Sold & Serviced By: