This document describes the DentalGuideSystem for implant placement using surgical guides. It highlights that the Simple Guide System offers [1] predictable implant placement through customized surgical templates, [2] increased patient satisfaction through optimized outcomes, and [3] reduced chair time and recovery periods compared to general implant surgery. The system uses 3D planning software and ZENITH 3D printing to create accurate surgical guides in a simple, universal, and economic manner.

1. DentalGuideSystem

2. Areyouusingtheguidesystem?
You’renot?
Why?
Tooexpensive?
Toocomplicated?
Uncomfortable?
Limitedusageofimplant?
Wecanhelpyousolvethese.

3. Change your mind that implant
guide system is still expensive,
difficult and complex!
DentalGuideSystem

4. More
Digital Technology
DENTIS offers solutions focused on predictability, reduced risk and
enhanced outcomes: from 3D treatment planning of your case,
to implant site preparation with the Simple Guide System,
to ZENITH 3D Printing System.
Simple Guide System
for
User

5. Safer, reduced chair time and better esthetics outcome.
Dental Guide System SIMPLEGUIDE
Optimize the restorative outcome
•Offer high esthetics and function to your patients with a
comprehensive range of prosthetic solutions.
Predictable implant placement
•Make your treatment plan a clinical reality with customized
surgical templates.
Experience powerful diagnostics and treatment
planning
•Avoid surprises during the treatment process through
careful diagnosis and treatment planning with the open
software. DENTIS would provide you proper education.
Increase patient satisfaction
•Achieve the best possible outcome even you have different
implant systems.
Simple Guide System (vs) General implant surgery
Description Gingival incision
Temporary
prosthetics
Chair time Recovery period
Simple Guide No need
CAD/CAM or
3D Printer
SHORT No need
General
implant surgery
Need Dental Laboratory LONG Need
for
Patient

6. GuideSurgeryWorkProcess
6 I SIMPLEGUIDE
Finish everything of your case within a day
with ZENITH 3D printing system.
Diagnostics CT & Scanning
3D diagnostics and
treatment planning
Making surgical guide
by ZENITH 3D Printer
Guide
Surgery
3D diagnostics and treatment
planning
Visualize the patient’s (CB)CT data together with
the intra-oral situation including soft tissue and the
diagnostic tooth setup by Blue Sky Plan.
Making surgical guide
Extract the data after planning
and make surgical guide by
ZENITH 3D printer
You can easily, quickly and
economically make surgical
guide by yourself in your clinic
3 4
Clinical diagnostics and treatment
acceptance
Examine & diagnose your patient and get treatment
acceptance from your patient before making further
investments
CT & Scanning
Make a (CB)CT scan and digitize patient’s
information by oral scanner or model scanner.
1 2
e
Guide surgery
Go for fully guided drilling and implant insertion using a customized surgical
template based on your treatment plan.
5
Surgical guide
Remove surgical guide
Point drilling (Cortical Drill)
Initial & Path drilling
Universal Surgical Guide Kit!
DENTIS Simple Guide Kit can be
used with other implant system.
Go for final drilling according to the sequence of each implant system.
used w

7. SIMPLEGUIDE I 7
DISTINCTIVENESS
UniversalConvenient
Economic System
DENTIS Simple Guide System is cost-effective
compared with other guide systems
■ Free software
■ Simple surgical tools
■ ZENITH 3D Printing System
Simple System
Simple Guide System is being conducted with only
11 surgical tools matching and drilling simply.
■ Simple surgical kit
■ Simple process
■ Simple drilling protocol
1
3
2
4Convenient System
Simple Guide System applies the Open-Sleeve showing
enhanced convenience and allowing water-irrigation to
prevent over-heating.
■ Open sleeve
■ Good irrigation
Universal System
DENTIS Simple Guide Kit can be used with not only
DENTIS implant, but also every implant system in the
world.
■ All implant system
■ Flap or flapless surgery
SimpleEconomic

8. EconomicGuideSystem
8 I SIMPLEGUIDE
Free Software
There is no extra charge at all for the software01
Simple Surgical Kit
Simplified components reduce the cost of surgical
tool.
02
ZENITH 3D Printing System
Production cost is remarkably reduced by extracting
data from the software and making surgical guide in
your clinic with ZENITH 3D printer.
03
ost of surgical
Software Download
https://blueskybio.com/pages/blue-sky-plan-
guided-surgery-software

9. SIMPLEGUIDE I 9
SimpleGuideSystem
Simple Surgical Kit
DENTIS Simple Guide Kit is only made up by 11
surgical tools, while the other systems are made up
by dozens of surgical tools.
01
Simple Process
Process is simpler than general guide system and
adjustment by oral scanner is also easier.
02
Tissue punch
function
Simple Drilling Protocol
Drilling protocol became much simpler
because there is no need to use tissue
punch and drill guide.
Just remove surgical guide after Φ2.8
drilling, and place an Implant
according to the procedure of each
implant system.
03
Tissue punch Drill guide
Diagnostics CT & Scanning
3D diagnostics and
treatment planning
Making surgical
guide
Implant surgery
p

10. ConvenientGuideSystem
10 I SIMPLEGUIDE
Open Sleeve
Side approach allows drilling in low occlusal height of posterior teeth.01
Common sleeve
Occlusal Approach
Hand-piece can get stuck in the
antagonistic teeth.
Side Approach
Hand-piece doesn’t get stuck in the
antagonistic teeth.
Open Sleeve
3mmØ4Ø7.5
ApproachApproach
Ø5.5
6mm
5mm

11. SIMPLEGUIDE I 11
Open part of the sleeve allow water-irrigation
preventing over-heating.
ZENITH 3D Printing System
Manufacture the accurate surgical guide in your clinic by yourself!02
Sending CT and scan data
Dental
Clinic
Dental
Clinic
Dental
Lab
Center
Simulation
Making surgical guide (about 5 days)
Confirmation of Diagnostics
Common guide system DENTIS Simple guide system
Every process
by one stop
service.

12. 12 I SIMPLEGUIDE
SurgicalGuide
Sleeve+
SurgicalGuide
10mm
Bone
Tissue
CorticalDrill Ø2.3x8mm
StarterDrill Ø2.2PilotDrill Ø2.8x8mm
IntermediateDrill
UniversalGuideSystem
Simple Guide Drill
A Starter drill (Ø2.3x8mm) and Intermediate
drill (Ø2.8x8mm) are just 8mm.
C Ø2.3 → Ø2.2 drilling •Ø2.2 drilling
•For smooth drilling and maintaining path
(0.1mm gap) when you drill a Ø2.2 hole for
depth extension after Ø2.3x8mm drilling.
•Simplification of kit composition
B Ø2.2 Pilot drill is for depth extension •Made up by 10, 12, 14mm
•Choose proper drill according to fixture’s length
DENTIS Simple Guide System is compatible with any other implant
systems in the world.01
Flapless surgery is recommended basically, but flap surgery can be
possible according to your case.02
Place your Implant according to
the procedure
of each implant system

13. SIMPLEGUIDE I 13
Only 11 components for Simple Guide Surgery!
Simple Guide Surgical Kit
Sleeve
DSGDR
PlanningS/W
www.blueskybio.com
(BlueSkyPlan)
MountDriver
DRHDL24
CorticalDrill
DCD
Ø2.3X8mm
StarterDrill
DSGD2308
Ø2.2x10mm
PilotDrill
DSGD2210
Ø2.2x12mm
PilotDrill
DSGD2212
Ø2.2x14mm
PilotDrill
DSGD2214
Ø2.8x8mm
IntermediateDrill
DSGD2808
AnchorDrill
DGATD
AnchorScrew
DGAS18
18mm
Ø3
GIOKE

14. 14 I SIMPLEGUIDE
ZENITH®
3D Printing
System
Surgical Guide
Wax-up
Dental Model
Clear Aligner
DIGITALDENTISTRYwith
ZENITH® 3DPrintingSystem
Efficiently, effectively, and professionally
produce the superb results by ZENITHⓇ
3D Printer