The Roxtec BGTM product family is designed to safely and efficiently bond or ground armored and shielded cables through a single cut-out or open- ing in a wall, floor or electrical enclosure. The product provides a secure means of cable terminations and pass-throughs, provides an environmental and fire resistant seal, and establishes a secure bonding path to ground for metallic cable components. The product is certified for use in hazardous locations where required by local codes and regulations. The Roxtec BGTM system complies with EU directive 2002/95/EC, Restriction of Hazardous Substances (RoHS).
Roxtec Cable Transits - Installing & Terminating Substation Cables
Roxtec cable transits provide several clear advantages for installing and terminating cables in industrial and high voltage substations. Roxtec cable transits provide a standardised design with the flexibility to terminate a variety of different sizes and cable constructions. The ease of cable installation reduces labour costs and minimises the potential for cable insulation damage. The structural and environmental integrity of the wall or floor penetration is maintained providing an insulated, vapor-tight and fire-stop barrier and cables can be easily added for future up-grading. Roxtec cable transits are a viable alternative for terminating cables into industrial power substations.
Cembre B135C Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135C Battery Crimpers - Crimping Applications
HV & LV cable lugs - 400sqmm
HV & LV cable splices - 240sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Ellis Patents Alpha cable cleats are available for trefoil and single cable applications where moderate levels of short circuit withstand are required. Ellis Patents Alpha cable cleats unique design allows rapid installation offering significant man hours and labour saving for cable contractors.
Ellis Patents Alpha cable cleats are compliant with London Underground Engineering Standard 1-085 - Product Register No.360.
Alpha cable cleats are manufactured from extruded aluminium (6000 series) to BS EN 755, the cleat is lighter and tougher than the cast aluminium cable cleat product it is designed to replace - cleats are supplied with zinc plated closing fasteners.
3M Scotch 23 Tape - 3M Scotch Self-Amalgamating Rubber EPR Tapes
Scotch 23 Electrical Tape is a highly conformable 0.76mm thick, self amalgamating EPR (Ethylene Propylene Rubber) based, high voltage cable jointing tape. 3M Scotch 23 tape is non-vulcanising and shelf-stable with excellent electrical properties. Scotch 23 Tape can be used as insulation for low voltage applications as well as insulation for high voltage cable joints up to 69kV, especially 11kV and 33kV.
3M Scotch 23 Self-Amalgamating Tape Features
Can be used to splice and terminate cables with temperatures to 130°C
Based on Ethylene Propylene Rubber (EPR)
Physical and electrical properties are unaffected by the degree of stretch
Self-fusing Scotch 23 tape
Excellent electrical properties
Polyester liner which will not stick to the tape upon unwind
3M Scotch 23 Tape - Compatible with all solid dielectric cable insulations :-
Polyethylene (high and low density) cables
Cross-linked polyethylene (XLPE) cables
Polyvinyl chloride (PVC) cables
Butyl rubber cables
Ethylene Propylene Rubber (EPR) cables
Oil-based rubber cables
3M Scotch 23 Self-Amalgamating Tape Applications
Primary electrical insulation for splicing cable from 600V to 69kV
Primary insulation for building stress cones on cables up to 35kV
Jacketing on high voltage cable splices and terminations
Moisture sealing LV-HV electrical connections
Bus bar insulations
End sealing high voltage cables
Roxtec R pipe and cable transit frames, are round frames for installation in pipe sleeves or round holes. The compression is integrated in the frame and is used together with standard RM modules, attachment is by expansion within the hole, and can be installed around existing pipes and cables. R frames are supplied with a net installed on the back side as protection during horizontal installations (except R 70 and R 75). The Roxtec cable transit frame can be cut open for installation around existing cables or pipes.
The group of round frames are based on the RM structure with 60mm inserts. Roxtec round frames/seals are available both as single seals (RS) and round frames (R) for multiple cables.
Roxtec cable transit frames provide round sealing frames for cables and pipes ensuring safety, efficiency and long-term operational reliability - Roxtec cable and pipe seals protect against fire, gas, water, dusts, pests, blast load and electromagnetic interference.
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
The Roxtec BGTM product family is designed to safely and efficiently bond or ground armored and shielded cables through a single cut-out or open- ing in a wall, floor or electrical enclosure. The product provides a secure means of cable terminations and pass-throughs, provides an environmental and fire resistant seal, and establishes a secure bonding path to ground for metallic cable components. The product is certified for use in hazardous locations where required by local codes and regulations. The Roxtec BGTM system complies with EU directive 2002/95/EC, Restriction of Hazardous Substances (RoHS).
Roxtec Cable Transits - Installing & Terminating Substation Cables
Roxtec cable transits provide several clear advantages for installing and terminating cables in industrial and high voltage substations. Roxtec cable transits provide a standardised design with the flexibility to terminate a variety of different sizes and cable constructions. The ease of cable installation reduces labour costs and minimises the potential for cable insulation damage. The structural and environmental integrity of the wall or floor penetration is maintained providing an insulated, vapor-tight and fire-stop barrier and cables can be easily added for future up-grading. Roxtec cable transits are a viable alternative for terminating cables into industrial power substations.
Cembre B135C Hydraulic Crimping Tool - Battery Crimping Tools
14.4V cordless hydraulic battery crimping tool
Lightweight and balanced Cembre crimper for single hand operation
Double speed crimping action
Cembre crimping head can rotate through 180°
Quiet in operation with very little vibration
Operating buttons mechanically interlocked to prevent accidental operation
Microprocessor control with automatic motor cut out on completion of the crimping operation
Fitted with a maximum hydraulic pressure valve
Cembre B135C Battery Crimpers - Crimping Applications
HV & LV cable lugs - 400sqmm
HV & LV cable splices - 240sqmm
Insulated cable terminals - 240sqmm
C Sleeve connectors - 185sqmm
Ellis Patents Alpha cable cleats are available for trefoil and single cable applications where moderate levels of short circuit withstand are required. Ellis Patents Alpha cable cleats unique design allows rapid installation offering significant man hours and labour saving for cable contractors.
Ellis Patents Alpha cable cleats are compliant with London Underground Engineering Standard 1-085 - Product Register No.360.
Alpha cable cleats are manufactured from extruded aluminium (6000 series) to BS EN 755, the cleat is lighter and tougher than the cast aluminium cable cleat product it is designed to replace - cleats are supplied with zinc plated closing fasteners.
3M Scotch 23 Tape - 3M Scotch Self-Amalgamating Rubber EPR Tapes
Scotch 23 Electrical Tape is a highly conformable 0.76mm thick, self amalgamating EPR (Ethylene Propylene Rubber) based, high voltage cable jointing tape. 3M Scotch 23 tape is non-vulcanising and shelf-stable with excellent electrical properties. Scotch 23 Tape can be used as insulation for low voltage applications as well as insulation for high voltage cable joints up to 69kV, especially 11kV and 33kV.
3M Scotch 23 Self-Amalgamating Tape Features
Can be used to splice and terminate cables with temperatures to 130°C
Based on Ethylene Propylene Rubber (EPR)
Physical and electrical properties are unaffected by the degree of stretch
Self-fusing Scotch 23 tape
Excellent electrical properties
Polyester liner which will not stick to the tape upon unwind
3M Scotch 23 Tape - Compatible with all solid dielectric cable insulations :-
Polyethylene (high and low density) cables
Cross-linked polyethylene (XLPE) cables
Polyvinyl chloride (PVC) cables
Butyl rubber cables
Ethylene Propylene Rubber (EPR) cables
Oil-based rubber cables
3M Scotch 23 Self-Amalgamating Tape Applications
Primary electrical insulation for splicing cable from 600V to 69kV
Primary insulation for building stress cones on cables up to 35kV
Jacketing on high voltage cable splices and terminations
Moisture sealing LV-HV electrical connections
Bus bar insulations
End sealing high voltage cables
Roxtec R pipe and cable transit frames, are round frames for installation in pipe sleeves or round holes. The compression is integrated in the frame and is used together with standard RM modules, attachment is by expansion within the hole, and can be installed around existing pipes and cables. R frames are supplied with a net installed on the back side as protection during horizontal installations (except R 70 and R 75). The Roxtec cable transit frame can be cut open for installation around existing cables or pipes.
The group of round frames are based on the RM structure with 60mm inserts. Roxtec round frames/seals are available both as single seals (RS) and round frames (R) for multiple cables.
Roxtec cable transit frames provide round sealing frames for cables and pipes ensuring safety, efficiency and long-term operational reliability - Roxtec cable and pipe seals protect against fire, gas, water, dusts, pests, blast load and electromagnetic interference.
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
Le nuove frontiere dell'AI nell'RPA con UiPath Autopilot™UiPathCommunity
In questo evento online gratuito, organizzato dalla Community Italiana di UiPath, potrai esplorare le nuove funzionalità di Autopilot, il tool che integra l'Intelligenza Artificiale nei processi di sviluppo e utilizzo delle Automazioni.
📕 Vedremo insieme alcuni esempi dell'utilizzo di Autopilot in diversi tool della Suite UiPath:
Autopilot per Studio Web
Autopilot per Studio
Autopilot per Apps
Clipboard AI
GenAI applicata alla Document Understanding
👨🏫👨💻 Speakers:
Stefano Negro, UiPath MVPx3, RPA Tech Lead @ BSP Consultant
Flavio Martinelli, UiPath MVP 2023, Technical Account Manager @UiPath
Andrei Tasca, RPA Solutions Team Lead @NTT Data
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
