This document is a resume for Muhammad Shahid Hassan, an electrical engineer with over 20 years of experience in electrical construction, design, analysis, and project implementation. He has extensive experience managing electrical installations for large commercial and residential buildings in Saudi Arabia. His background includes electrical engineering roles with responsibilities like design, load calculations, material selection, construction oversight, and health and safety compliance.

1. PERSONAL STRENGTH
Dedicated Electrical Engineer having versatile experience of more than 20 years in electrical construction,
design, analysis, and implementation in both contracting and consulting environment. Proven technical,
interpersonal communications, and training skills. Expert in analyzing existing site progress and implementing
future plans to improve performance for delivering project on time, within cost, quality and safety parameters.
Muhammad Shahid Hassan
B.E. (Electrical) NED University Karachi Pakistan
Email kesc99@gmail.com
Cell# 00966-508784161 Outside KSA
Cell# 0508784161 Inside KSA
CORE EXPERTISE
• Design power system
• Load Calculations
• Selection of Cables
• Design low current sys.
• Building Construction
• As built Drawings
• Shop drawings
• Material Approval
• Material Purchasing
• Quantities
• Variation
• Inspections QA/QC
• Panel Boards
• MV Cables
• MV RMU
• LV cables
• Generators
• Transformers
NATIOAL PAN KINGDOM CONSTRUCTION COMAPANY (NPK)
AL AHELLA COMMERCIAL CENTER Makkah Aug 2009—Nov 2015
Al A Hella commercial center is 17 floor multipurpose commercial building having
94 shops, 94 offices, super market, one banquet hall, Gym, 3 floor parking and
electromechanical installation at roof floor. Project has 8 nos. power transformers
ranging from 1600KVA to 2500KVA making total of 15MVA. Building surface
area is 10000m2 and a total of 70000m2 of covered area.
Responsibilities: as Electrical Engineer
• To make/revise shop drawings as per follow the tender drawings/requirement
of client and then their approvals.
• Dealing with any technical issues that may arise.
• To make new load calculations as per variation.
• Plans and analyses all possible construction methodologies and recommends
the best options to the Project Manager for approval prior to execution at site.
• Working for purchasing material as per approved drawings
• Prepare monthly/weekly progress report for client/consultant.
• Ensuring that on site Health & Safety regulations are strictly adhered to.
• Manages directly and provide engineering and technical supports to all the
electrical work groups at site.
• Plans the execution of all electrical related works and coordinates the works to
mechanical and civil groups.
• Coordination with sub-contractor of low current systems
• Coordination with mechanical department for electromechanical installation.
• Coordinates with Client / Consultants representatives for any site instructions
and inspection of works.
• To make as built drawing and pursue for approval.
• Undertaking hands on electrical installation work.
• Making sure that safe working practices are maintained at all times.
• Making sure that work methods are sufficient to meet a project needs.
RESIDENTIAL STATUS
Iqama Makkah Al Mukarramah
RESIDENCE
Makkah AL Mukarramah
TECHNICAL TRAINING
 Six months On Job Training at
Thermal Power House WAPDA
Faisalabad Pakistan.
March-1991---Aug. 1991
 40 hrs. Technical Writing Methods
Training at Projacs International.
 40 hrs. Quality Control and Quality
Assurance at Projacs INT.
TECHNICAL SKILLS
 Operating System: Windows 8/7,
2000 and XP
 Full Competent with all aspects of
Microsoft Office.
 Engineering Software such as
AutoCAD, Eco dial, Photoshop,
and others like Java Scripting,
HTML
 Adequate typing skills
MEMBERSHIP
 Pakistan Engineering Council
Life membership
LANGUAGES
 English, Urdu
 Arabic (basic)
DRIVING LICENSE
 Private car license
MARITAL STATUS
Married with 3 children

2. PROJACS INTERNATIONAL: Feb.’2007---March’2009
Projacs International showed its presence in building construction business within 17 countries in four continents
including Asia, Africa, Europe and North America. The main core business of company is project management
and supervision. In western region of Saudi Arabia, company assisted GOSI as project consultant for Mina
pilgrim residential towers and Al Amjaad group for their Le Meridian towers (Kudai) in Makkah.
Mina pilgrim residential towers comprises of 6 multistoried building having capacity to accommodate
approximately twelve thousand pilgrims during Hajj. Each tower has 10 typical floors for residence and 3 floors
for other services/utilization.
Responsibilities:
Worked as Electrical Engineer with responsibilities:
• To review/revise shop drawings as per follow the tender drawings/ requirement of client.
• Review and revise the load calculation as per approved shop drawings.
• Recommend the material for the approval.
• Workout for bill of quantities for payment certificate / Variation
• Conducting site surveys, audits and inspections for electrical installation and work done as per
specification and standard codes described in agreement.
• Quality control/assurance for installed electrical work.
• Time scheduling for contractor.
• Preparation of monthly progress report for client.
• Review and approval as per build drawings.
ABDUL REHMAN HARTHI EST. FOR CONTRACTING Jan.’ 2006------Oct.’ 2006
As sub. Contractor for Electrical installation at DAR AL HADI hotel which includes electrical, fire alarm, public
address, CCTV/Security, television, telephone/intercom systems. It is an 85 million SAR project located in
AZIZIA MAKKAH KSA. and comprises of three towers with Restaurant, Main Hall, Mezzanine, Service, Masjid
Hall, Two Basement car parking, Main Entrance Hall, Roof floor and Ten floors of typical configuration having
1000 guest rooms making the project up to nineteen floor levels.
Responsibilities
Worked as technical advisor for electrical installation and having responsibilities:
• To make/revise shop drawings as per follow the tender drawings/requirement of client and then their
approvals.
• To make load calculations as per approved shop drawings.
• Recommend the material for the approval.
• Workout for bill of quantities for payment certificate.
• As per build drawings.
MIDDLE EAST TELECOM COMPANY (METCO) Riyadh, KSA Jan’ 2005-------Dec’ 2005
Worked as site electrical engineer at SECURITY FORCES HOSPITAL near Awali MAKKAH under
supervision of Saud consultant.
Responsibilities
Worked as Site Engineer/Inspector Electrical at SFH MAKKAH with responsibilities of;
• Coordination with consultant for approval of drawings shop drawings and material.
• Alteration/changing in drawings and materials as per site requirement and then pursue for their approvals.
• As Electrical Inspector maintains the quality/quantity of electrical installation material for permanent
work.
• Coordination with quantity surveyor for the payment certificate for the accomplished electrical work.
• Mobilization of site electrical work as well as planning and supervising the permanent electrical
installation for the project as per approved drawings from raft to first floor level for MV/LV and low
current systems.

3. AL-SAHAFI EST. FOR CONTRACTING Jeddah, KSA. April 2002 ------Dec’ 2004
Al-Sahafi Est. for Contracting is working in the field of plumbing and electro-mechanical works in western region
of Kingdom. Company has proudly completed two major projects. First one is the installation of IDB financial
assisted waste chemical Sewerage exit in Industrial Area at Jeddah and other one is ABB electro- mechanical
Installation for Ministry of Water and Power pumping station at Makkah with East Consultant as Supervising
Company with overall cost of SAR 40 million.
Responsibilities
Worked as site Engineer for Electro - mechanical installation at interconnection of Desalination
water supply from Shoiaba at Makkah-Al-Mukarramah. Work Involve the execution of MV/LV System
with the voltage level of 4.160/.380 KV including Transformers upto 3MVA and generators with the size
of 1.2MVA and also the electrification of whole plant. Assignment also involves the installation of low
current system including telephone/intercom, fire alarm, and controlling for RTU’s.
KARACHI ELECTRIC SUPPLY CORPORATION: (www.kesc.com.pk) Sep’91-----Nov’ 2001
Present name K-ELECTRIC is a power utility company having 6024 sq. kms. of license area providing
electricity to above 22 million consumer with a system demand of above 2700 MW having a network of
75 grid-stations and almost 1400 nos. of 11 kv feeders.
Responsibilities:-
Worked as Assistant Executive Engineer, I was responsible but not limited to;
• Monitoring the 11/0.420 kV networks and ensuring reliable and uninterrupted power supply and
in case of power failure to locate the faulty portion, isolate the same and then effectively transfer
the load also the load management of 11kv feeders/transmission lines/ power transformers and
keep them within limit for the reliability of the system.
• Supervising the important 11/0.420kv cable faults which affects the overall performance of
system and overloading of burdened feeder.
• Assessment of present and incoming and then to propose 11kv feeders/new links at different
load centers to relieve the overloaded feeders and for future load growth.
• Laying of medium voltage cables between two stations and L.T. cable from L.T. room/PMT to
O/H or consumer distribution box.
• Erection of 11/0.420 kV overhead system including pole erection and its allied accessories,
stringing of conductors, PMT structure etc.
• Scheduling and supervising annual preventive maintenance programs of overhead primary/
secondary distribution lines, 11kv Switchgears and distribution transformers, PMT’s and also
L.T. panels.
• Installation of 11 kV switchgears, RMU, isolators, distribution transformers and L.T. panels.
• To propose 11kv feeders/ new links to relieve the overloaded feeders and for the future load
growth.
• Preparation of technical drawings / single line diagram.
DAWLANCE PRIVATE LIMITED: ( www.dawlance.com.pk ) Aug. 1988 ----Mar.1991.
Worked as Maintenance/Instrumentation engineer.
Job description and responsibilities can be provided on request.
THANKS FOR REVIEW MY CV