This document discusses techniques for writing readable Clojure code, including:
- Using threading macros like -> and ->> to avoid reading code bottom-up.
- Removing useless code through partial application and function composition.
- Following rules when using macros, such as avoiding macros when higher-order functions suffice, and being careful when designing new languages with macros.
- Accounting for side effects and sequencing of operations when designing domain-specific languages within applications.
- Avoiding duplication of code through refactoring.
(1) The document describes OpenStack networking architecture that scales to over 1,000 servers without using Neutron. It uses a layer 3 spine and leaf topology with no VLANs.
(2) Key components include Nova network which is distributed, NAT services on the edge, and a VIF driver that sets up routing and DHCP for each VM.
(3) Challenges included moving OpenStack targets and an immature Neutron. The architecture provides a solid underlay for SDN and future integration with Neutron.
This document discusses techniques for writing readable Clojure code, including:
- Using threading macros like -> and ->> to avoid reading code bottom-up.
- Removing useless code through partial application and function composition.
- Following rules when using macros, such as avoiding macros when higher-order functions suffice, and being careful when designing new languages with macros.
- Accounting for side effects and sequencing of operations when designing domain-specific languages within applications.
- Avoiding duplication of code through refactoring.
(1) The document describes OpenStack networking architecture that scales to over 1,000 servers without using Neutron. It uses a layer 3 spine and leaf topology with no VLANs.
(2) Key components include Nova network which is distributed, NAT services on the edge, and a VIF driver that sets up routing and DHCP for each VM.
(3) Challenges included moving OpenStack targets and an immature Neutron. The architecture provides a solid underlay for SDN and future integration with Neutron.
This document discusses the potential of smart cities and the Internet of Things. It notes that the number of connected devices is growing rapidly and will reach 50 billion by 2050. While some cities have implemented smart technologies successfully, others have faced challenges. Mere technology adoption is not enough; smart cities must consider data privacy, sustainable business models, and how technologies impact communities. The document advocates for open innovation platforms to help cities collaborate and realize the benefits of smart technologies.
Este documento presenta conceptos fundamentales sobre torsión en ingeniería mecánica. Introduce las hipótesis y fórmulas de torsión, incluida la torsión cortante longitudinal y la torsión en tubos de pared delgada. Explica el flujo de esfuerzos cortantes a través de una sección transversal y su relación con el par de torsión aplicado.
The document discusses the history and development of artificial intelligence over the past 70 years. It outlines some of the key milestones in AI research from the early work in the 1950s to modern advances in machine learning using neural networks. While progress has been made, fully general human-level artificial intelligence remains an ongoing challenge being worked on by researchers.
uTICe: una formación universitaria especializada en TIC para la atención educ...joseluisserrano
Presentación realizada por Carina González, utilizada durante el Seminario de Pedagogía Hospitalaria y TIC realizado en noviembre de 2013 en la Universidad de Murcia.
Acción llevada a cabo en el marco del Proyecto ALTER: http://www.um.es/aulashospitalarias/
Física descripción del movimiento 3: Aceleración constante unidimensional y c...Alberto Grados Mitteenn
El documento explica las ecuaciones de cinemática para movimiento con aceleración constante y cómo aplicarlas a situaciones físicas como caída libre. Introduce las tres ecuaciones básicas y cómo deducir una de otra. Luego presenta ejemplos de aplicación a caída libre, incluyendo lanzamiento de objetos y tiempo de reacción. Concluye que los tiempos de ascenso y descenso son iguales durante caída libre y que la velocidad en la cúspide es cero.
The document discusses challenges with outsourcing software development and scaling agile frameworks. It recommends adopting both Lean and Agile principles to address challenges like long feedback cycles. Specifically, it suggests doing a Lean-Agile assessment, value stream mapping, and regular retrospectives to improve processes and focus on continuous delivery of business value. Patterns for successful distributed development include establishing global structures, rhythms, and practices to facilitate collaboration across locations.
This document provides instructions for using Netcore, a tool for sending mass emails. It describes how to create a list name, upload contacts from a CSV file by mapping fields, create a new campaign by inputting details and HTML content, publish the campaign to send emails, and view reports on email delivery, opens, clicks, bounces and unsubscribes. The document is intended to guide users through the full process of setting up and sending an email campaign using Netcore's features.
As most sales professionals know, when you sell on price, you immediately diminish the value of the service you’re offering. And yet, at the advent of the cloud a few years ago, that was the selling point used most often to communicate the value of the cloud. So, how do you differentiate yourself from your competition? Check out this presentation. Want to know more? Follow our blog at http://success.coredial.com/blog or find us on LinkedIn, Twitter or Google+
Reducing risk and improving sustainability - ICT can contribute to thisSjaak Wolfert
Short presentation for a a panel discussion on reducing risk and improving sustainability and how ICT can contribute to this. This presentation was part of the World Congress on Computers and Agriculture and Natural Resources (WCCA2014) in San José, Costa Rica
A pitch we made to Telstra, Australia in 2006.
This proposal was for a joint venture with the search arm of Telstra called Sensis. Our plan was to get a deal with them so we could deploy a Texxi system to Australian cities and share the revenues with them. The revenues would not just be SMS, but from moving people also. We also had ongoing projects to introduce Texxi on smartphones. This was a missed opportunity for Telstra, but to be fair, few people in the mobile business understood how powerful "Social" would be.
This document discusses the potential of smart cities and the Internet of Things. It notes that the number of connected devices is growing rapidly and will reach 50 billion by 2050. While some cities have implemented smart technologies successfully, others have faced challenges. Mere technology adoption is not enough; smart cities must consider data privacy, sustainable business models, and how technologies impact communities. The document advocates for open innovation platforms to help cities collaborate and realize the benefits of smart technologies.
Este documento presenta conceptos fundamentales sobre torsión en ingeniería mecánica. Introduce las hipótesis y fórmulas de torsión, incluida la torsión cortante longitudinal y la torsión en tubos de pared delgada. Explica el flujo de esfuerzos cortantes a través de una sección transversal y su relación con el par de torsión aplicado.
The document discusses the history and development of artificial intelligence over the past 70 years. It outlines some of the key milestones in AI research from the early work in the 1950s to modern advances in machine learning using neural networks. While progress has been made, fully general human-level artificial intelligence remains an ongoing challenge being worked on by researchers.
uTICe: una formación universitaria especializada en TIC para la atención educ...joseluisserrano
Presentación realizada por Carina González, utilizada durante el Seminario de Pedagogía Hospitalaria y TIC realizado en noviembre de 2013 en la Universidad de Murcia.
Acción llevada a cabo en el marco del Proyecto ALTER: http://www.um.es/aulashospitalarias/
Física descripción del movimiento 3: Aceleración constante unidimensional y c...Alberto Grados Mitteenn
El documento explica las ecuaciones de cinemática para movimiento con aceleración constante y cómo aplicarlas a situaciones físicas como caída libre. Introduce las tres ecuaciones básicas y cómo deducir una de otra. Luego presenta ejemplos de aplicación a caída libre, incluyendo lanzamiento de objetos y tiempo de reacción. Concluye que los tiempos de ascenso y descenso son iguales durante caída libre y que la velocidad en la cúspide es cero.
The document discusses challenges with outsourcing software development and scaling agile frameworks. It recommends adopting both Lean and Agile principles to address challenges like long feedback cycles. Specifically, it suggests doing a Lean-Agile assessment, value stream mapping, and regular retrospectives to improve processes and focus on continuous delivery of business value. Patterns for successful distributed development include establishing global structures, rhythms, and practices to facilitate collaboration across locations.
This document provides instructions for using Netcore, a tool for sending mass emails. It describes how to create a list name, upload contacts from a CSV file by mapping fields, create a new campaign by inputting details and HTML content, publish the campaign to send emails, and view reports on email delivery, opens, clicks, bounces and unsubscribes. The document is intended to guide users through the full process of setting up and sending an email campaign using Netcore's features.
As most sales professionals know, when you sell on price, you immediately diminish the value of the service you’re offering. And yet, at the advent of the cloud a few years ago, that was the selling point used most often to communicate the value of the cloud. So, how do you differentiate yourself from your competition? Check out this presentation. Want to know more? Follow our blog at http://success.coredial.com/blog or find us on LinkedIn, Twitter or Google+
Reducing risk and improving sustainability - ICT can contribute to thisSjaak Wolfert
Short presentation for a a panel discussion on reducing risk and improving sustainability and how ICT can contribute to this. This presentation was part of the World Congress on Computers and Agriculture and Natural Resources (WCCA2014) in San José, Costa Rica
A pitch we made to Telstra, Australia in 2006.
This proposal was for a joint venture with the search arm of Telstra called Sensis. Our plan was to get a deal with them so we could deploy a Texxi system to Australian cities and share the revenues with them. The revenues would not just be SMS, but from moving people also. We also had ongoing projects to introduce Texxi on smartphones. This was a missed opportunity for Telstra, but to be fair, few people in the mobile business understood how powerful "Social" would be.
CRM software is aanpasbaar en gaat met de tijd mee. Wij geven u 8 tips waar u rekening mee moet houden tijdens het aanpassen en updaten van uw CRM systeem.
Wij zijn gespecialiseerd in het ontwikkelen van pasklare software die u in staat stelt uw administratie op orde te houden. Onze programma's worden gebruikt in het midden- en kleinbedrijf (de programma's zijn toepasbaar in iedere branche) en door administratie- en accountantskantoren. De kracht van MicroStar softwareprogramma's ligt in het feit dat MicroStar er, tegen een laag maandtarief, voor zorgt dat uw boekhoudpakket altijd up-to-date is. Doordat wij de ontwikkelingen in de markt goed in de gaten houden en hier adequaat op in spelen, ontvangen onze gebruikers automatisch de nieuwste updates voordat er problemen ontstaan (bijvoorbeeld wanneer de Belastingdienst een nieuwe eis verbindt aan belastingaangiftes).
Daarnaast is een kenmerk van MicroStar programma's dat ze zeer gebruiksvriendelijk zijn. Zowel de gebruiker met een eenvoudige administratie als grote bedrijven met uitgebreide administratieve systemen kunnen goed uit de voeten met onze programma's zonder eerst een dikke gebruikershandleiding door te hoeven lezen.
In de overzichtelijke navigatie is ook een hulpfunctie opgenomen. Deze kan op elk gewenst moment worden opgeroepen en indien gewenst kan onze professionele adviseur ook op locatie komen. Ook het overzetten van uw bestanden is geen probleem. Door middel van een speciale programmafunctie helpt de software u stap voor stap door de opstartfase heen. Stuit u toch op problemen dan staat onze helpdesk voor u klaar. Dit scheelt u veel tijd; u bent snel weer helemaal operationeel.
Gaat uw bedrijf uitbreiden? MicroStar heeft verschillende softwarepakketten en uitbreidingen waardoor u te allen tijde beschikt over een passende administratie. De boekhoudprogramma's van MicroStar zijn ook te leasen.
Zoals u ziet heeft MicroStar voor elk probleem een passende oplossing, en staat u als klant centraal.
Veel van jullie zijn op dit moment bezig met of staan op het punt om een e-commerce replatforming traject in te gaan. Wist jij dat nog niet?
Dan hoop ik dat ik je met dit document kan helpen om inzichtelijk te krijgen wanneer je zou moeten overwegen een nieuw platform te kiezen, welke opties er zijn, waar je rekening mee moet houden en een globaal stappenplan.
Introductie van standaard software bedrijf Netaspect en haar verzekeringsadministratie software Certigo voor het nieuwe verzekeren. Waarom kiezen voor Netaspect?
Entretien avec Cédric Rey, responsable du service structure d’Oteis Befs, pour analyser les atouts du logiciel SCIA Engineer dans le cadre d’un projet d’envergure : l’Atrium de
l’université de Montpellier.
In order to facilitate large containerships through the Albert Canal, four lock bridges needed to be elevated and refurbished. SCIA Engineer proofed once more to be an excellent software to do the modelling and dimensioning of the bridges.
De investeerder wilde heden ten dage niet enkel een opmerkelijk gebouw met architecturale uitstraling, maar tegelijk ook een modern projectontwerp met BIM. Het model kan daardoor verder worden gebruikt voor specifieke klanteneisen en voor het onderhoud van het gebouw. Ontdek hoe SCIA Engineer zich perfect integreert in de BIM-workflow.
Een gebouw staat of valt letterlijk bij een goede stabiliteitsstudie. Toch schuiven heel wat opdrachtgevers en
architecten het studiebureau stabiliteit nog altijd in een naar achter geschoven rol. Wanneer de ingenieur stabiliteit al in de voorontwerpfase mee aan tafel mag zitten, kan hij niet
alleen zijn kunde beter benutten, de totale bouwkost kan ook veel gunstiger uitvallen. Dat staven de deelnemers aan dit debat stabiliteit met enkele sterke argumenten en voorbeelden.
SCIA Engineer est le logiciel référence pour modélisation, analyse et dimensionnement de tout type de construction. Pour la construction métallique, les ponts, bâtiments ...
Du calcul de stabilité aux plans d'exécution - Rendez-vous le 11/11 à LuxembourgRudi Vanmechelen ✉ SCIA
* Présentation d'une solution complète du calcul de stabilité aux plans d’exécution.
* Construction métallique – Bâtiments – Ouvrages d’art
* Logiciels métier avec plus de 40 ans d’expérience
* Support technique en français et allemand
Des exposés variés: l’occasion de mettre à jour ses connaissances - ExpoAcier: à la découverte de produits innovants - Le Concours Construction Acier : une source d’inspiration unique - Rencontre des acteurs importants du secteur de l’acier - Les dernières publications sur la construction en acier
Bij de sterkteberekening van constructies gaan ingenieurs er dikwijls van uit dat staal en aluminium zich op een identieke manier gedragen. Dikwijls wordt enkel het eigen gewicht van het materiaal aangepast en worden spanningen en instabiliteit (knikken en kippen) op dezelfde manier geïnterpreteerd. Maar niets is minder waar.
Met behulp van de koppelingenbibliotheek in SCIA Engineer definëert men met één enkele muisklik de Layher steigerkoppelingen. Controles worden uitgevoerd conform EN12810 en EN12811
SCIA et Open BIM: une approche collaborative entre architectes et ingénieursRudi Vanmechelen ✉ SCIA
Vision, solutions et projets réalisés avec les logiciels dessin Allplan et calcul Scia Engineer du groupe Nemetschek. Extrait de notre présentation à la formation Open BIM de LIST (G.D. Lux)
Een studiedag rond de nieuwigheden van Scia Engineer 15, zes praktische workshops (staal, beton, composiet, ...), de toepassing van de Scia software voor de Deurganckdoksluis (door Arcadis) en handige tips & tricks. U bent welkom!
Ontwerpen en bouwen in BIM is the next new thing in de bouw. Hoe ver staat België hiermee? Limburg Bouwt polste bij enkele voorlopers naar mogelijkheden en hindernissen. SCIA was één van de gesprekspartners.
SCIA nodigt u uit op 25/09 te Brussel. Ontdek onze reken-en tekensoftware.Rudi Vanmechelen ✉ SCIA
Op 25/09 stellen we u in het prestigieuze Pullman hotel te Brussel Midi (op een paar passen van de perrons van Thalys, TGV en Eurostar) onze reken- en tekensoftware voor. Live demo's van Scia Engineer, Allplan Engineering en hoe ze in te zetten in uw BIM proces. Ontdek hoe de meest gebruikte software in België ook bij u kunnen ingezet worden.
SCIA nodigt u uit op 25/09 te Brussel. Ontdek onze reken-en tekensoftware.
Scia - informatie onderhoud en services
1. De Belangrijkste Voordelen
van de Nemetschek Scia
Onderhouds- en Supportovereenkomst?
Uw concurrentievoordeel behouden vereist de zekerheid dat u in staat bent om uw software via de nieuwste technologische en
functionele ontwikkelingen voortdurend up-to-date te houden. De Onderhouds- en Supportovereenkomst van Nemetschek Scia
komt op de meest kosteneffectieve manier aan deze eis tegemoet.
2. Alle nieuwe ‘Major Software Releases’ krijgt u automatisch
Ten minste één maal per jaar lanceert Scia een nieuwe ‘major software release’ op DVD, die u automatisch per
post ontvangt. Deze ‘major software release’ omvat:
• Alle softwarecorrecties (bug fixes) sinds de vorige softwareversie
• Nieuwe functies, uitbreidingen en verbeteringen in de software en beschikbare edities
• Norm-afhankelijke software-updates (bv. wanneer een nationale code verandert).
4. Toegang tot de lijst van alle Opgeloste Software-Bugs
Voor elke major release en voor elk nieuw service pack is een gedetailleerde lijst van alle opgeloste bugs
beschikbaar in de Beveiligde Downloads Sectie. Deze lijst is enkel en alleen beschikbaar voor klanten met een
onderhouds- en supportovereenkomst.
1. Een Personal User Account op de Scia Website
Als klant met een onderhoudsovereenkomst kunt u zich registreren en ontvangt u een Personal User Account (login)
voor de Scia Website. Na het inloggen krijgt u toegang tot onze beveiligde webomgeving met o.a.:
• Beveiligde Downloads Sectie, met waardevolle online hulpbronnen
• Beveiligde webpagina voor het indienen van uw supportvragen
• Overzicht en opvolgingssysteem van al uw persoonlijke supportvragen en antwoorden (support tickets).
3. Toegang tot alle nieuwe Software Service Packs
Service packs zijn tweemaandelijkse software-updates. U downloadt ze via een snelle verbinding in de
Beveiligde Downloads Sectie of via het menu-item ‘Check for Update’ in de software. Scia beschikt ook over een
RSS-informatiesysteem. Dit is een abonnementsdienst die u automatisch informeert van zodra er een nieuwe
software-update beschikbaar is (http://www.scia-online.com/rss).
5. Online management van Supportvragen (Tickets)
Elke klant met onderhoud maakt zijn of haar persoonlijke supportvragen aan en beheert ze via de website
(http://www.scia-online.com/en/support.html). Een supportvraag wordt als een Scia support-ticket opgeslagen.
Op elk moment kunt u nieuwe support-tickets ingeven, de status van uw tickets opvolgen of tickets consulteren die
al beantwoord en afgesloten zijn.
U wilt een snel antwoord op uw technische vragen?
Uw medewerkers hebben gespecialiseerde ondersteuning of advies nodig?
U wilt gebruik kunnen maken van de meest recente innovaties?
Scia biedt u een uitgebreide keuze aan tools! Een overzicht van Scia’s Top 10:
?
Scia Group nv • Industrieweg 1007 • B-3540 Herk-de-Stad • Belgium • Tel.: +32 13 55 17 75 • Fax: +32 13 55 41 75 • info@scia-online.com • www.scia-online.com
2
4
1
3
5
2. 6. Prioritaire Klantensupport via E-mail
Via een centraal e-mailadres (support@scia-online.com) kunt u op elk moment een supportvraag, indien nodig met
bijlage, sturen aan onze Product Services Afdeling. Deze e-mail wordt automatisch in een support-ticket omgezet.
Vervolgens verschijnt dit in het overzicht van uw support-tickets. U ontvangt een bevestiging van zodra uw vraag
geregistreerd is. Vragen die per e-mail bij Scia binnenkomen worden prioritair behandeld.
8. Support via Remote Control
Onze supportingenieurs kunnen makkelijk, in real time en wereldwijd, de controle van uw computer via het internet
overnemen. Scherm en muis van de klant worden vanop afstand overgenomen om elk technisch probleem op te
lossen of om een online-inspectie van uw hardware uit te voeren. Scia gebruikt hiervoor Netviewer, een tool die
vanuit onze website wordt opgestart.
10. Snelle Dienstverlening van Hoge Kwaliteit
De kwaliteit van de geleverde service wordt continu gemeten en bijgestuurd. Regelmatig organiseren wij support-
enquêtes, die ons de nodige feedback geven om de kwaliteit van onze software-oplossingen en -diensten naar een
hoger niveau te tillen. Wist u dat ...
• meer dan 80% van alle Scia Engineer supportvragen wordt behandeld en afgesloten binnen 1 werkdag.
• meer dan 95% van alle tickets binnen een week verwerkt is.
• de overige 5% zijn meestal aanvragen zijn voor uitbreidingen van bestaande functies of suggesties voor nieuwe
softwarefunctionaliteiten? Deze ideeën registreren wij op onze ‘Customer Wish List’.
7. Prioritaire Klantensupport via Telefoon
Alle klanten met een onderhouds- en supportovereenkomst kunnen voor hun dringende vragen of problemen
hun lokaal Product Services Team telefonisch contacteren. Deze dienst is beschikbaar tijdens de normale lokale
kantooruren. We beschikken over supportcentra in België, Frankrijk, Duitsland, Nederland, Spanje, Tsjechië,
Slovakije, de Verenigde Arabische Emiraten, het Verenigd Koninkrijk, de Verenigde Staten van Amerika en de lijst
wordt steeds verder uitgebreid.
9. Support door Hoog Gekwalificeerde Ingenieurs
Onze Product Services Afdeling wordt bemand door gespecialiseerde en hoog opgeleide ingenieurs.
’Scia Engineer’-support wordt verleend door ervaren bouwkundige ingenieurs en ‘Allplan’-support door bekwame
architecten. Zo kan u communiceren op een zeer hoog technisch niveau en de tijd om eventuele problemen op
te lossen verkorten. Op onze User meetings, die in uw regio worden georganiseerd, kunt u natuurlijk altijd onze
Product Services Engineers eens persoonlijk ontmoeten!
Duidelijke en praktische informatie rond hernieuwing en opzegging van onderhouds- en
supportovereenkomsten:
1. Hernieuwing: een onderhouds- en supportovereenkomst is geldig voor een periode van 1 jaar en wordt automatisch verlengd
voor een bijkomende periode van 1 jaar.
2. Opzegging: een onderhouds- en supportovereenkomst kan schriftelijk, ten minste 3 maanden voor het einde van de
onderhoudsperiode, opgezegd worden.
Haal nu het maximum uit uw investering met een Nemetschek Scia Onderhouds- en Supportovereenkomst.
Wij garanderen u een snelle en professionele dienstverlening.
Scia Group nv • Industrieweg 1007 • B-3540 Herk-de-Stad • Belgium • Tel.: +32 13 55 17 75 • Fax: +32 13 55 41 75 • info@scia-online.com • www.scia-online.com
U HELPEN IS ONZE TOPPRIORITEIT!
6
8
10
7
9