The document provides instructions for using the book scanner and flatbed scanner located in the QCC Library. For the book scanner, users must obtain an access key from the Reserve Desk using their QCC OneCard. They then insert the key and their USB flash drive into the book scanner to begin scanning pages from books or documents. The flatbed scanner is located in front of the Periodical section and instructions for its use are on the desktop.

1. BOOK SCANNERS & FLATBED
SCANNER
QCC Library © 2013

2. BOOK SCANNERS
Book Scanners are located in
front of the Reserve Desk.

3. Request the Book Scanner access key at the Reserve Desk.
To begin, insert access key & USB flash drive into the USB port,
located in front of the book scanner.
 You must have an activated QCC OneCard in order to obtain the key.
 Access key must be returned within the time limit (30 minutes); any additional minutes will
be subject to fines.
 You must use your own USB flash drive in order to save your scanned documents.

4. Touch the screen to begin.

5. Press NEXT to continue.

6. Press ACCEPT to continue and accept the copyright policy.

7. You may change the default scan settings or press NEXT to
continue. (Note: Color scanning takes much longer to save.)

8. Place book or document face-down then press NEXT to
continue.

9. Once the SCAN button is pressed, the system will display a
scanning progress window.

10. If you have finished scanning then press the SAVE button to
continue. (Note: For best results, save scans in smaller units;
for example, scan and save pages from one chapter, then scan
and save pages from another chapter.)

11. Press ACCEPT to continue. (Note: If Free Space: = 0.00 MB
then you can insert a different USB flash drive.)

12. Either accept the default file name or enter a new one, then
press NEXT to continue.

13. Remove your USB flash drive when done.

14. FLATBED SCANNER
We have one self-service flatbed scanner located in front of the
Periodical section. Instructions are located on the desktop.