1) The document provides steps to flash a Samsung S8 device that has a custom binary blocked by an ERP lock using firmware downloads and Nemo Firmware Manager (NFM). 2) It involves downloading necessary firmware files from a provided link, flashing the device to normal operation using just the firmware files in Odin, then preparing the PC and device for NFM flashing by disabling driver signature enforcement and enabling developer options. 3) The steps also cover connecting the device to the PC running NFM via USB, selecting the compatible firmware in NFM, updating the firmware which reboots the device, and verifying a successful update with a green notification in NFM.

1. SAMSUNG S8 CUSTOM BINARY BLOCKED BY ERP LOCK AND
NMR RECOVERY STEPS
07/08/2020

2. STEP 1: FIRM WARE DOWNLOADING
 Downloading all NECCESARY firm Wares by using The link Sent From Key sight Technology
which is not available after two days duration.
How to download:
 Browse the link With appropriate Browser on your PC
 Download AP.. Firmware (File size around 3.6 GB)
 Download BL.. Firmware(File size around 2.17MB)
 Download .. Firmware(File size around 25.2 MB)
 Download CSC.. Firmware(File size around 402 MB)
 Download Odin .. File size around 4.29 MB
 Download FWClint local which contains Nemo Firm ware file size (20.7 MB)
2
WWR Optimization Group
07/08/2020

3. FIRMWARE LIST IN GOOGLE DRIVE
3
WWR Optimization Group
07/08/2020

4. HOW TO DOWNLOAD ODIN AND NEMO MEDIA FIRMWARE
When you download Odin and FW Client local Choose open with Zip Extractor from drive
and choose WinRAR ZIP archive when you use other browser like Firefox as shown on
below figure.
4
WWR Optimization Group
07/08/2020

5. CONT.…
Be sure that you have the all these Firm wares and Odin
5
WWR Optimization Group
07/08/2020

6. CONT.…
Extract Odin and FWCLINT LOCAL to get Nemo media Firmware
6
WWR Optimization Group
07/08/2020

7. FLASHING S8 WITH ONLY FIRM WARES (NOT NMR FIRMWARE)
How?
1.Connect your phone with PC by USB Cable
2. Open Odin set up after you run it.
3. Press and hold Volume-DOWN Button power button and Home Butten simultaneously
until you see a screen asking for confirmation to access Download mode as shown
below.
7
WWR Optimization Group
07/08/2020

8. CONT…
4. Press Volume-UP to confirm.
Now, the device is in Download mode.
8
WWR Optimization Group
07/08/2020

9. CONT..
→ open Odin setup on your pc and Carefully load BL file in BL tab of Odin, AP file in AP,
CP file in CP , and CSC file in CSC tab
→ Please be sure that as you untick Repartetion,Nand erase,F.Reset time, device
info, flash lock, decompress data and only Auto reboot is ticked under option on
interface of Odin
→ Click start and wait for device to reboot to normal home screen
→ Look the below fig as example for Odin interface
9
WWR Optimization Group
07/08/2020

10. CONT..
Odin interface and loading Firmware.
10
WWR Optimization Group
07/08/2020

11. FLASHING NEMO FIRM WARE MANAGER
When ?
After you finish all the above flashing process and your phone is recovered.
 To Flash Nemo media Firmware manager give attention and you have to make ready
1.Your pc which you are flashing with
2.Phone for compatibility For NMR work Successfully
3.USB cable for compatibility of Flashing
11
WWR Optimization Group
07/08/2020

12. STEPS TO MAKE READY YOUR PC TO FLASHING NFM
Purpose : Disabling Driver Signature For compatibility of NMR
How ?
For 64-bit versions of Windows 10 and 8
1. Click the Start menu and select Settings.
2. Click Update and Security->Recovery.
3. Click Restart now under Advanced Startup
4. Click Troubleshoot->Advanced options->Startup Settings->Restart
5. On the Startup Settings screen press 7 or F7 to disable driver signature enforcement. Your
computer will restart and you will be able to install non-digitally signed drivers. If you restart your
computer again the driver signature enforcement will be re-enabled.
For Windows 7 64 bit version, open a command prompt as an admin and type
bcdedit -set loadoptionsDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
12
WWR Optimization Group
07/08/2020

13. STEPS TO MAKE READY YOUR SAMSUNG S8 TO FLASHING NFM
1.Go to Settings > About device > Software info > tap many times "Build number" in order
to enable Developer options
2. Settings > Developer options > Enable OEM unlocking
connect device to Internet if OEM unlock option is not visible in Developer options Wait a
while to allow for data connection to start, and check OEM unlock status
3. Be sure that “OEM unlocking" is now visible and enabled (ticked)
4. Disable “Auto update system” and Enable “USB debugging” in developer options.
13
WWR Optimization Group
07/08/2020

14. STEPS TO MAKE READY USB CABLE FOR FLASHING NMF
1.Dial*#0808# and in USB Settings
select MTP + ADB from your mobile
Device click “ok”
2.Connect USB To PC
3. On your mobile device
Go to setting >USB Controlled
By and select Connected device
14
WWR Optimization Group
07/08/2020

15. CONT..
 Open Nemo Firmware Manager and connect the mobile device via USB cable to the
computer in which Nemo Firmware Manager is running.
 Wait for the device USB driver installation. The installation may take several minutes. A
popup for allowing USB debugging appears on the screen of the mobile device.
Select ok when you see this option
15
WWR Optimization Group
07/08/2020

16. CONT..
→ Wait for NFM to read IMEI and show check firmware button.
→ Select recommended Compatible fw version for your device, click update and allow
driver installation messages if you see any during flashing.
→ Once the firmware has been updated, the mobile device reboots. Do not disconnect
the device during the reboot.
16
WWR Optimization Group
07/08/2020

17. CONT..
Don’t miss to choose “yes” and “install
this drive anyway” when you face this
option.
17
WWR Optimization Group
07/08/2020

18. NFWM INTERFACE
18
WWR Optimization Group
07/08/2020

19. CONT..
 The notification on Nemo Firmware Manager turns green when updating is completed
successfully.
19
WWR Optimization Group
07/08/2020

20. Thank You