This parts list contains 23 items needed to assemble a hydraulic press. It includes the names and part numbers of components like a 4-stage air cylinder, clamping bases, flanged bushings, a shaft collar, silencers, friction hinges, and various plates, blocks, and panels to construct the frame. Vendors are listed for purchased parts.

2. 8 7 6 5 4 3 2 1
PARTS LIST
ITEM QTY PART NUMBER DESCRIPTION VENDOR
1 1 MP4x1-4-1-FF 4 STAGE AIR CYLINDER FABCO AIR
2 2 U-CLSM-1.0 CLAMPING BASE MISUMI USA
3 2 U-JUCC-1.00 FLANGED BUSHING MISUMI USA
4 1 U-SSCDN-1.0 SHAFT COLLAR MISUMI USA
5 2 ANA1-02 SILENCER SMC
6 2 1791A440 FRICTION HINGE ASSEMBLY McMASTER-CARR
H H
7 1 RD-01400 CONTROL SUPPORT ASSEMBLY
8 1 RD-02231 PLATE, HEATER DIE
9 1 RD-01404 HEATER BLOCK
10 1 RD-01405 RAM
11 1 RD-01406 SLIDE BASIN
12 1 RD-01408 BASE PLATE
13 1 RD-01409 CYLINDER MOUNT PLATE
14 2 RD-01410 BEARING SHAFT MAKE FROM McMASTER-CARR #6493K14
15 1 RD-01407 SLIDE
16 2 RD-01411 SLIDE RETAINER
17 1 RD-01414 RIGHT SIDE PANEL
18 1 RD-01413 LEFT SIDE PANEL
19 1 RD-01415 REAR PANEL
63 20 2 G7A40-E12 WATLOW HEATER CARTRIDGE WATLOW
21 1 AZ16 SCHMERSAL SWITCH SCHMERSAL
22 2 2024 SCHMERSAL SWITCH KEY SCHMERSAL
59
23 1 RD-01403 HEAT ISOLATOR
24 1 RD-01417 ACCESS DOOR
5 25 2 1661A2 NYLON PULL HANDLE McMASTER-CARR
B
B 26 4 5193A4 NYLON PULL McMASTER-CARR
27 1 RD-01421 CONTROL COVER
G 28 2 609-5628 FAN FILTER ALLIED ELECTRONICS G
52 29 1 800TFXP1604 SWITCH ALLEN-BRADLEY
30 1 3846K44 PRESSURE GAUGE (1-100 PSI) McMASTER-CARR
7 31 3 R5T185L283-004-302-18-F3036-2 WATLOW RTD WATLOW
32 1 KMF1-1291-11 POWER ENTRY MODULE SCHURTER
VIEW A-A
33 1 RD-01427 CONTROL CONNECTION BRKT.
SCALE 1 / 2
(COVER NOT SHOWN) 34 1 H5CR-B OMRON TIMER OMRON
101 102 103 87 93 91 90 94 92 58 35 1 988B-22CD-AARG WATLOW CONTROL WATLOW
36 1 RD-01420 DOOR KEY MTG. PLT.
72 90 37 1 RD-01416 ACCESS DOOR HINGE SUPPORT
38 4 M5 - 0.8 x 45.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
21
1 39 8 M5 - 0.8 x 60.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
40 13 M5 - 0.8 x 20.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
41 6 M6 - 1 x 30.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
42 2 M8 - 1.25 x 40.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
71 43 4 M4 - 0.7 x 16.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
44 18 M8 - 1.25 x 30.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
22
45 2 M5 - 0.8 x 14.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
46 2 M5 x 0.8 x 10 FLAT HEAD SOCKET CAP SCREW - 316 STAINLESS
2 47 3 M6 x 1 x 20 FLAT HEAD SOCKET CAP SCREW - 316 STAINLESS
48 2 5/16-18 UNC x 0.625 BUTTON HEAD CAP SCREW - 18-8 SS
F 49 2 M5 - 0.8 x 16.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS F
50 7 FNT4 DOMED CAP NUT MISUMI USA
44 51 3 M4 x 0.7 x 12 FLAT HEAD SOCKET CAP SCREW - 316 STAINLESS
52 2 749-000-004 POSITION SENSOR FABCO AIR
82
53 1 OTBVP6QD OPTO-TOUCH SWITCH BANNER
54 1 800T-A1A PUSH BUTTON - GREEN ALLEN-BRADLEY
55 1 6916K32 FIBERGLASS ENCLOSURE McMASTER-CARR
56 1 RD-01425 SWITCH BOX SUPPORT
13
57 4 M5 - 0.8 x 8.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
11 58 5 M6 - 1 x 25.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
59 29 M5 - 0.8 x 25.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
62 36 22 21 45 69 56 60 4 M4 - 0.7 x 10.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
17
61 2 5/16-18 x 1 SHCS 5/16-18 x 1 SOCKET HEAD CAP SCREW- 18-8 STAINLESS STEEL
62 2 M5 - 0.8 x 12.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
25 67 63 18 M5 - 0.8 x 16.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
73 64 6 M5 - 0.8 x 10.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
65 2 M6 - 1 x 10.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
66 6 M4 - 0.7 x 8.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
18 24 67 5 M4 - 0.7 x 10.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
68 9 M4 x 0.7 x 8 FLAT HEAD SOCKET CAP SCREW - 316 STAINLESS
69 2 M6 - 1 x 16.0 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
77
44 70 1 SBPPS3-6 RESIN TIP SET SCREW MISUMI USA
E E
79 71 4 M10 - 1.5 x 45.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
72 1 CNGBA20-150-D BRAKING CYLINDER SMC
70 73 1 RD-01422 LOCK CYL. SHAFT COLLAR
74 4 M4 - 0.7 x 20.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
78 75 2 SBCPS 4-20 BRASS TIP SET SCREW MISUMI USA
53 76 2 JFB-29003 TOOLING BALL REID TOOL SUPPLY
77 1 SXPA12 INDEX PLUNGER MISUMI USA
19
78 1 RD-01419 STOP PLATE
54 SECTION E-E 79 1 SSTEHW14 STOP MISUMI USA
SCALE 1 / 2
80 1 SBPPS4-6 RESIN TIP SET SCREW MISUMI USA
E 81 2 M8 FLAT WASHER FLAT WASHER - ROUND 18-8 STAINLESS (DIN-125)
82 1 VT317E-5GS-02 SMC 3 PORT POPPET VALVE HPE
83 1 T3K 236-20z SCHMERSAL SWITCH STYLE 3K SCHMERSAL (EMD INC.)
23
40 84 1 M5 - 0.8 x 30.0 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
85 2 SHCS 8-32 X .75 SOCKET HEAD CAP SCREW- 18-1 STAINLESS
9 86 1 RD-01412 CYLINDER CONNECTOR
16 50 87 1 6430K31 AIRPOT DASHPOT SNUBBER DS 160 S McMASTER-CARR
88 1 RD-01617 SCHMERSAL MOUNT PLATE
8 95 37
89 1 RD-01618 SAFETY SHIELD
90 1 1SE3 N/O SNAP ACTION MINATURE SWITCH McMASTER-CARR #7517K31
18 91 2 92000A019 M2 x 12 PAN HD. SCREW McMASTER-CARR
D 92 1 RD-01629 MICRO-SWITCH MOUNT D
26
93 1 RD-01630 SNUBBER MOUNT
85
88 130 83 94 2 M6 - 20 DOWEL PIN M6 - 20 S.S. DOWEL PIN
95 1 K060803 ASY 101 2GT BENCH TOP HEAT SEAL FIXTURE
67 SECTION D-D 96 3 M4-0.7x25 SOCKET HEAD CAP SCREW - 18-8 SS -M4-0.7x25
SCALE 1 / 2
97 2 M6 SPLIT LOCK WASHER - 18-8 SS - DIN 7980 - M6
SECTION B-B
27 98 1 M6-1x16 SOCKET HEAD CAP SCREW - 18-8 SS -M6-1x16
SCALE 1 / 2
99 2 M6-1x10 BUTTON HEAD CAP SCREW - 18-8 SS - M6-1x10
E 100 1 K060803 DET 007 SLIDE / HANDLE SUPPORT
12 113 35 101 1 K060803 DET 101 OVERTEMP BRACKET
102 1 SD3C-HJJA-AARG OVER TEMP CONTROLLER WATLOW
A A 103 4 M4-0.7 x 8 BHCS SS18-8 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
55 56 57 69 78 75 28 104 1 K060803 DET 102 SENSOR MOUNTING PLATE
105 1 K060803 DET 103 SENSOR MOUNTING PLATE
106 2 M5-0.8 x 16 FHCS SS18-8 FLAT HEAD CAP SCREW - 18-8 STAINLESS
16
68 107 2 M6-1 x 14 BHCS SS18-8 BUTTON HEAD CAP SCREW - 18-8 STAINLESS
108 2 M3 - 0.5 x 10 SHCS SS18-8 SOCKET HEAD CAP SCREW - 18-8 STAINLESS
109 1 PZ-V11P PHOTOELECTRIC SENSOR KEYENCE
15 66
110 1 K060803 DET 104 MAGNET BLOCK
111 2 M4-0.7 x 16 FHCS SS18-8 FLAT HEAD CAP SCREW - 18-8 STAINLESS
112 2 5862K94 RARE EARTH MAGNET McMASTER CARR
66
C 113 1 P12-02-F000 PRESSURE REGULATOR WILKERSON C
114 1 NVFS3100-5FZ-02T 5 PORT AIR VALVE SMC
32
115 1 KQ2E12-00 BULKHEAD FITTING (12mm TUBE) SMC
115 30
44 73 72
7 34
33 29
40
27
27
29 40
64
13
3
41
64 3
39
64
24
10
B 38 B
37
44 23
F 31
26 F
9
20
8 95
73 50 41
14 25
37
42
14 36
18 SECTION F-F 107 109 105 104
47 SCALE 1 / 2
D D 111
63 68
03 REVISED UNIT PER POLYCARBONATE HEAT SEALING REQUIREMENTS DCB 06-03-09
6 02 UPDATED BOM KRD 11-10-06
112 69
01 ADDED ADDITIONAL SAFETY FEATURES DCB 12-05-05 DCB
A 00 RELEASE dbyram 4/19/2005 A
60 REV DESCRIPTION BY DATE APP'D
NOTE: THIS IS A COMPUTER GENERATED DRAWING. ALL CHANGES
HERE TO MUST BE REFLECTED IN THE COMPUTER DATABASE
6 56 REVISION HISTORY
111 110 NOTICE DRAWING DESCRIPTION
55
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF
VISTAKON AND ITS RECEIPT OR PROCESSION DOES NOT
CONVEY AND RIGHTS TO REPRODUCE OR DISCLOSE ITS
VISTAKON
DIVISION OF
2GEN BENCHTOP HEATSEAL FIXTURE
CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING Johnson & Johnson ASSEMBLY
12 IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE
Vision Care, Inc. SIZE DRAWING NO. REV
WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF VISTAKON
IS STRICTLY FORBIDDEN.
43 dbyram E A-TEMP 03
DWN BY: DATE 4/19/2005
CHK'D BY: DATE NEXT ASM QTY/ASM 1 SCALE ASM WT SHEET 1 OF 2
8 7 6 5 4 3 2 1

3. 4 3 2 1
144.5
174.5
249.0
0.00
12X M5x0.8 x 20.0
8X n6.8 THRU
15X n5.5 THRU M8x1.25 x 20.0 (2) n28.0
v n9.5 x 15.0
5 x 45~
D 355.00 D
349.00 349.00
339.40
335.00
323.96 4X M10x1.5 THRU
289.04
280.40
.4
270.00
268.10
254.40
n40.0
245.50
241.00
211.80
n25.4
192.5 B 258.000 `0.03
B 185.50
177.50 R6.4 175.60
162.5 165.00 A
C 143.20 C
114.00
STAMP OR ENGRAVE PART NO. & REV.
86.90
85.00
74.60 143.30
48.50
20.00 6.00
15.60
6.00
0.00 0.00 0.00
10.41
(2) 5 x 45~
79.90
0.00
19.00
27.60
33.38
52.35
81.00
82.60
116.35
128.63
137.60
160.41
180.35
192.60
229.00
234.00
244.35
247.60
B 4X M5x0.8 x12.0 11.00 B
n50.00
130.25 BORE IN LINE
WITH RD-01408
n12.00
3.00
10.41
n9.5
c 0.010
14.00
02 DELETED FRONT TAPPED HOLE; REV. 01 WAS "A" DCB 06-02-09
4X M5x0.8 x12.0 01 REDUCED MOUNTING HOLES DCB 08-14-06 DCB
00 RELEASE DCB 4/20/2005
25.4 BOTH SIDES
REV DESCRIPTION BY DATE APP'D
0.00
19.80
169.80
NOTE: THIS IS A COMPUTER GENERATED DRAWING. ALL CHANGES
HERE TO MUST BE REFLECTED IN THE COMPUTER DATABASE
REVISION HISTORY
6 NOTICE
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF VISTAKON AND ITS RECEIPT OR PROCESSION DOES NOT CONVEY
14.00 n4.50 THRU AND RIGHTS TO REPRODUCE OR DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING IT MAY DESCRIBE.
REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF VISTAKON IS STRICTLY FORBIDDEN.
A DWG BY: DCB DATE 4/20/2005 UNLESS OTHERWISE SPECIFIED A
CHK'D BY: DATE ALL SHEETS ARE THE HIGHEST
REVISION SHOWN IN THE REVISION BLOCK
VISTAKON
DETAIL A TOLERANCES MATERIAL
ALUMINUM 6061-T6 ALL DIMENSIONS IN MILLIMETERS
DIVISION OF
Johnson & Johnson
SCALE 1.50 : 1 CUSTOM FINE NORMAL ROUGH REMOVE ALL TOOLMARKS Vision Care, Inc.
X ` X ` 0.1 X ` 0.4 X ` 3.0 THIRD ANGLE PROJECTION PER
ASME Y14.3M
DRAWING DESCRIPTION
SECTION B-B XX ` XX ` 0.05 XX ` 0.15 XX ` 1.50 INTERPRET DIMENSIONING AND
SCALE 1 / 2 XXX ` XXX ` 0.013 XXX ` 0.025 XXX ` 0.500 HEAT TREATMENT
TOLERANCING PER ASME
Y14.5M - 1994
CYLINDER MOUNT PLATE
NONE SURFACE ROUGHNESS 0.8
REMOVE ALL BURRS AND SHARP EDGES
ANGLE ` ANGLE ` 0.25 ANGLE ` 0.50 ANGLE ` 1.00 MAXIMUM RADIUS OF MACHINED SIZE DRAWING NO. REV
GENERAL MAGNAPLATE TUFRAM H+ COATING PART MARK DRAWING & REVISION LEVEL SURFACE FINISH INTERNAL OR EXTERNAL CORNERS
MASK ALL THREADED HOLES (SEE ABOVE SPEC)
0.25
ALL DIMENSIONS APPLY AFTER
C RD-01409 02
NEXT ASM RD-01374 QTY/ASM 1 PLATING / FINISH
SCALE UNIT WT. SHEET 1 OF 1
4 3 2 1