Sampathkumar Duraisamy is an embedded software engineer located in Chennai, India, with over 2 years of experience programming in Assembly, C, Embedded C, and Python. He has worked on various microcontrollers and has experience with communication protocols like I2C, SPI, and UART. Some of his key projects include developing a beeper timer device using a Renesas microcontroller, implementing a Zigbee-based home automation system with Arduino, and building a vending machine controller. He is proficient in programming tools and IDEs like Keil uVision, MPLAB, Arduino, and Raspbian.

1. SAMPATHKUMAR DURAISAMY,
Embedded Software Engineer,
Chennai, India.
Phone : +919003052345
E-mail : samsin1992@gmail.com
Professional Summary:
 2+ Years of Work Experience on Assembly, C, Embedded C, Python Programming
languages.
 Hands on knowledge with various Microcontrollers and basic concepts about RTOS.
 Experience with Protocols like I2C, SPI and UART.
 Design, Development and Problem solving skills with Hardware.
 Having good practice and experience in various Sensors/Interface Modules.
Educational Background:
 Post Graduate Diploma in Embedded System Design from Accel IT Academy,
Bengaluru-2013.
 Bachelor of Engineering in Electronics and Communication from Annamalai
University, Chidambaram, India - 2013 (78%).
 HSC (Kamaraj Matriculation School) - 2009 (77%).
 SSLC (Subramania Bharathi Matriculation School) - 2007 (72%).
Professional Experience:
Position : Embedded Software Engineer.
Company : Vistronics Design Solutions, Chennai.
Duration : August 2013 to till date (2.4 years).
Technical Skills:
 Operating System Windows, Linux.
 Programming Languages Assembly, C, Embedded C, Python.
 Microcontrollers 8051, PIC 18F, Renesas R8C/25, ARM7
LPC2148, Arduino, Raspberry Pi.
 Compilers Keil uVision4, MPLAB, High Perfomance
Embedded Workshop, Proteus 7 and 8
Professional.
 Protocols I2C, SPI, UART, CAN.
 Circuit Debugger E1 for Renesas, Mirochip ICD2, Pickit2,
Pickit3 for PIC.
 Tools MS-Word, MS-Excel, MS-Powerpoint.

2. Key Projects:
Project 1: BeeperAutomated
 Beeper has five programmable Timers runs on Program mode and Normal mode.
 In run mode, an LED show the status and Buzzer alarms when reaches time.
 EEPROM is to store timings.
Interfaces : Renesas R8/C25 MCU, LED, Buzzer, 24C02 EEPROM.
Duration : 2 months
Environment : High Perfomance Embedded Workshop
Project 2: Zigbee Based Home Automation Technique Using Arduino
 Main purpose of this technique is used to control the Home Appliances through
Zigbee Protocol
 Detect the IR signal and decode it through IR sensor, when the signal matches, the
Coordinator passes instruction through Transmitter.
 The configured Router gets instruction through Receiver and switches the Home
Appliances.
Interfaces : Two Arduino Module, Two Zigbee Module, IR Sensor and Remote, Home
Appliances.
Duration : 3 months
Environment : Arduino IDE
Project 3 : 3Lane COLD
 3Lane Cold is a Semi-Automated cold vending machine with 3 Premix Lane.
 Inside compressor, there is a ring like tube through which water flows from hot tank to
cold tank for ever dispense.
 In this project, Heater is for Flushing the machine and Compressor is used to make Ice
bank at the cold tank.
Interfaces : Renesas R8/C25 MCU, I2C based EEPROM, Hot Sensor, Cold Sensor and
Level Sensor, Float Switch, ADC.
Duration : 4 months
Environment : High Perfomance Embedded Workshop IDE

3. Project 4 : Face Detection for High Security using Raspberry Pi
 The webcam connected to Raspberry Pi will take the picture whenever it detect a face on
the frame, and it compares with the database to check whether that particular person is
already registered or not.
 Python Imaging Library (PIL) is used for image processing and Open CV 2.7 module is
used for detecting faces.
Interfaces : Raspberry Pi, Picam, Open CV 2.7.
Duration : 3 months
Environment : Raspbian (Linux Distribution)
Personal Details:
 Name : SampathKumar Duraisamy
 Gender : Male
 Father’s Name : R Duraisamy
 DOB : 13/03/1992
 Nationality : Indian
 Passport : N2753302
 Languages Known : Tamil, English, Hindi and Telugu
 Hobbies : Cooking, Swimming, Listening Music, Playing PC games
 Permanent Address : 19/8, Mariamman Koil Street,
Perumathur, Cuddalore District,
India.
Pin code : 608601
Declaration:
Hereby I declare that the details furnished above are true to the best of my knowledge.
Place: Chennai, India
Date : (SAMPATH KUMAR DURAISAMY)