Ron Barstow is an architect with extensive experience in architectural design, planning, and project management for industrial, commercial, institutional, and military facilities. He has worked on projects such as campus planning, industrial site planning, federal site planning, and military base redevelopment. His skills include conceptual design, master planning, presentation, and problem solving.
beck-technology.com - 5D macro BIM project profiles using DProfiler. These projects illustrate the power of integrating 3D (visual modeling), 4D (scheduling) and 5D (cost estimating) in real time. Featuring DProfiler used in governments, healthcare, education and private development building projects.
Achieve high performance in building design. Provide integrated and collaborative sustainable design services inclusive of independent engineering disciplines and innovative solutions. To realize our clients’ vision. A commitment to Civic Service and the built and un built environment.
GSA Goes Macro BIM: Using 5D BIM Technology for Feasibility StudiesBeck Technology, Ltd.
http://www.beck-technology.com - Read about how the GSA used 5D BIM technology for feasibility studies for two high profile projects, a new Department of Homeland Security complex and Department of Housing and Urban Development's consolidation.
The federal government will soon undertake what the General Services Administration, the landlord for all federal buildings, calls the largest public building project since construction of the Pentagon during World War II: consolidating the Department of Homeland Security on the campus of the former St. Elizabeth’s Psychiatric Hospital, a National Historic Landmark in Washington, DC.
Planning is also in the works for renovations to the 43-year-old Robert C. Weaver Building, the home of the Department of Housing and Urban Development.
Demonstrated Capabilities to execute multi-million projects on the strength
of own cash flows with support from Banks and external borrowings
The Group has Inorganically grown over the last few years by acquiring
units
Specialized Professionals are engaged to execute Projects as per
schedule
Corporate Social Responsibility through Health Camps with specialised
doctors at Zoom Vallabh
Corporate philosophy is to enhance Stakeholders Value
beck-technology.com - 5D macro BIM project profiles using DProfiler. These projects illustrate the power of integrating 3D (visual modeling), 4D (scheduling) and 5D (cost estimating) in real time. Featuring DProfiler used in governments, healthcare, education and private development building projects.
Achieve high performance in building design. Provide integrated and collaborative sustainable design services inclusive of independent engineering disciplines and innovative solutions. To realize our clients’ vision. A commitment to Civic Service and the built and un built environment.
GSA Goes Macro BIM: Using 5D BIM Technology for Feasibility StudiesBeck Technology, Ltd.
http://www.beck-technology.com - Read about how the GSA used 5D BIM technology for feasibility studies for two high profile projects, a new Department of Homeland Security complex and Department of Housing and Urban Development's consolidation.
The federal government will soon undertake what the General Services Administration, the landlord for all federal buildings, calls the largest public building project since construction of the Pentagon during World War II: consolidating the Department of Homeland Security on the campus of the former St. Elizabeth’s Psychiatric Hospital, a National Historic Landmark in Washington, DC.
Planning is also in the works for renovations to the 43-year-old Robert C. Weaver Building, the home of the Department of Housing and Urban Development.
Demonstrated Capabilities to execute multi-million projects on the strength
of own cash flows with support from Banks and external borrowings
The Group has Inorganically grown over the last few years by acquiring
units
Specialized Professionals are engaged to execute Projects as per
schedule
Corporate Social Responsibility through Health Camps with specialised
doctors at Zoom Vallabh
Corporate philosophy is to enhance Stakeholders Value
3D laser scanning: A tale of two architectural projects - One went wrong, one...Greg Dolphin
This presentation will discuss:
Architectural Projects – Current views of the industry from the perspective of Architects and Service Providers
The “wrong” outcome – Project example illustrating why Architects are slow to adopt
The “right” outcome – Project example illustrating the benefit of using the USIBD Standards and a qualified team
The U.S. Institute of Building Documentation – The new standard RFQ, RFP and Spec documents to create a successful outcome.
Enterprise Excellence is Inclusive Excellence.pdfKaiNexus
Enterprise excellence and inclusive excellence are closely linked, and real-world challenges have shown that both are essential to the success of any organization. To achieve enterprise excellence, organizations must focus on improving their operations and processes while creating an inclusive environment that engages everyone. In this interactive session, the facilitator will highlight commonly established business practices and how they limit our ability to engage everyone every day. More importantly, though, participants will likely gain increased awareness of what we can do differently to maximize enterprise excellence through deliberate inclusion.
What is Enterprise Excellence?
Enterprise Excellence is a holistic approach that's aimed at achieving world-class performance across all aspects of the organization.
What might I learn?
A way to engage all in creating Inclusive Excellence. Lessons from the US military and their parallels to the story of Harry Potter. How belt systems and CI teams can destroy inclusive practices. How leadership language invites people to the party. There are three things leaders can do to engage everyone every day: maximizing psychological safety to create environments where folks learn, contribute, and challenge the status quo.
Who might benefit? Anyone and everyone leading folks from the shop floor to top floor.
Dr. William Harvey is a seasoned Operations Leader with extensive experience in chemical processing, manufacturing, and operations management. At Michelman, he currently oversees multiple sites, leading teams in strategic planning and coaching/practicing continuous improvement. William is set to start his eighth year of teaching at the University of Cincinnati where he teaches marketing, finance, and management. William holds various certifications in change management, quality, leadership, operational excellence, team building, and DiSC, among others.
What is the TDS Return Filing Due Date for FY 2024-25.pdfseoforlegalpillers
It is crucial for the taxpayers to understand about the TDS Return Filing Due Date, so that they can fulfill your TDS obligations efficiently. Taxpayers can avoid penalties by sticking to the deadlines and by accurate filing of TDS. Timely filing of TDS will make sure about the availability of tax credits. You can also seek the professional guidance of experts like Legal Pillers for timely filing of the TDS Return.
India Orthopedic Devices Market: Unlocking Growth Secrets, Trends and Develop...Kumar Satyam
According to TechSci Research report, “India Orthopedic Devices Market -Industry Size, Share, Trends, Competition Forecast & Opportunities, 2030”, the India Orthopedic Devices Market stood at USD 1,280.54 Million in 2024 and is anticipated to grow with a CAGR of 7.84% in the forecast period, 2026-2030F. The India Orthopedic Devices Market is being driven by several factors. The most prominent ones include an increase in the elderly population, who are more prone to orthopedic conditions such as osteoporosis and arthritis. Moreover, the rise in sports injuries and road accidents are also contributing to the demand for orthopedic devices. Advances in technology and the introduction of innovative implants and prosthetics have further propelled the market growth. Additionally, government initiatives aimed at improving healthcare infrastructure and the increasing prevalence of lifestyle diseases have led to an upward trend in orthopedic surgeries, thereby fueling the market demand for these devices.
Taurus Zodiac Sign_ Personality Traits and Sign Dates.pptxmy Pandit
Explore the world of the Taurus zodiac sign. Learn about their stability, determination, and appreciation for beauty. Discover how Taureans' grounded nature and hardworking mindset define their unique personality.
Remote sensing and monitoring are changing the mining industry for the better. These are providing innovative solutions to long-standing challenges. Those related to exploration, extraction, and overall environmental management by mining technology companies Odisha. These technologies make use of satellite imaging, aerial photography and sensors to collect data that might be inaccessible or from hazardous locations. With the use of this technology, mining operations are becoming increasingly efficient. Let us gain more insight into the key aspects associated with remote sensing and monitoring when it comes to mining.
As a business owner in Delaware, staying on top of your tax obligations is paramount, especially with the annual deadline for Delaware Franchise Tax looming on March 1. One such obligation is the annual Delaware Franchise Tax, which serves as a crucial requirement for maintaining your company’s legal standing within the state. While the prospect of handling tax matters may seem daunting, rest assured that the process can be straightforward with the right guidance. In this comprehensive guide, we’ll walk you through the steps of filing your Delaware Franchise Tax and provide insights to help you navigate the process effectively.
Unveiling the Secrets How Does Generative AI Work.pdfSam H
At its core, generative artificial intelligence relies on the concept of generative models, which serve as engines that churn out entirely new data resembling their training data. It is like a sculptor who has studied so many forms found in nature and then uses this knowledge to create sculptures from his imagination that have never been seen before anywhere else. If taken to cyberspace, gans work almost the same way.
Accpac to QuickBooks Conversion Navigating the Transition with Online Account...PaulBryant58
This article provides a comprehensive guide on how to
effectively manage the convert Accpac to QuickBooks , with a particular focus on utilizing online accounting services to streamline the process.
"𝑩𝑬𝑮𝑼𝑵 𝑾𝑰𝑻𝑯 𝑻𝑱 𝑰𝑺 𝑯𝑨𝑳𝑭 𝑫𝑶𝑵𝑬"
𝐓𝐉 𝐂𝐨𝐦𝐬 (𝐓𝐉 𝐂𝐨𝐦𝐦𝐮𝐧𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬) is a professional event agency that includes experts in the event-organizing market in Vietnam, Korea, and ASEAN countries. We provide unlimited types of events from Music concerts, Fan meetings, and Culture festivals to Corporate events, Internal company events, Golf tournaments, MICE events, and Exhibitions.
𝐓𝐉 𝐂𝐨𝐦𝐬 provides unlimited package services including such as Event organizing, Event planning, Event production, Manpower, PR marketing, Design 2D/3D, VIP protocols, Interpreter agency, etc.
Sports events - Golf competitions/billiards competitions/company sports events: dynamic and challenging
⭐ 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐝 𝐩𝐫𝐨𝐣𝐞𝐜𝐭𝐬:
➢ 2024 BAEKHYUN [Lonsdaleite] IN HO CHI MINH
➢ SUPER JUNIOR-L.S.S. THE SHOW : Th3ee Guys in HO CHI MINH
➢FreenBecky 1st Fan Meeting in Vietnam
➢CHILDREN ART EXHIBITION 2024: BEYOND BARRIERS
➢ WOW K-Music Festival 2023
➢ Winner [CROSS] Tour in HCM
➢ Super Show 9 in HCM with Super Junior
➢ HCMC - Gyeongsangbuk-do Culture and Tourism Festival
➢ Korean Vietnam Partnership - Fair with LG
➢ Korean President visits Samsung Electronics R&D Center
➢ Vietnam Food Expo with Lotte Wellfood
"𝐄𝐯𝐞𝐫𝐲 𝐞𝐯𝐞𝐧𝐭 𝐢𝐬 𝐚 𝐬𝐭𝐨𝐫𝐲, 𝐚 𝐬𝐩𝐞𝐜𝐢𝐚𝐥 𝐣𝐨𝐮𝐫𝐧𝐞𝐲. 𝐖𝐞 𝐚𝐥𝐰𝐚𝐲𝐬 𝐛𝐞𝐥𝐢𝐞𝐯𝐞 𝐭𝐡𝐚𝐭 𝐬𝐡𝐨𝐫𝐭𝐥𝐲 𝐲𝐨𝐮 𝐰𝐢𝐥𝐥 𝐛𝐞 𝐚 𝐩𝐚𝐫𝐭 𝐨𝐟 𝐨𝐮𝐫 𝐬𝐭𝐨𝐫𝐢𝐞𝐬."
Cracking the Workplace Discipline Code Main.pptxWorkforce Group
Cultivating and maintaining discipline within teams is a critical differentiator for successful organisations.
Forward-thinking leaders and business managers understand the impact that discipline has on organisational success. A disciplined workforce operates with clarity, focus, and a shared understanding of expectations, ultimately driving better results, optimising productivity, and facilitating seamless collaboration.
Although discipline is not a one-size-fits-all approach, it can help create a work environment that encourages personal growth and accountability rather than solely relying on punitive measures.
In this deck, you will learn the significance of workplace discipline for organisational success. You’ll also learn
• Four (4) workplace discipline methods you should consider
• The best and most practical approach to implementing workplace discipline.
• Three (3) key tips to maintain a disciplined workplace.
Affordable Stationery Printing Services in Jaipur | Navpack n PrintNavpack & Print
Looking for professional printing services in Jaipur? Navpack n Print offers high-quality and affordable stationery printing for all your business needs. Stand out with custom stationery designs and fast turnaround times. Contact us today for a quote!
Memorandum Of Association Constitution of Company.pptseri bangash
www.seribangash.com
A Memorandum of Association (MOA) is a legal document that outlines the fundamental principles and objectives upon which a company operates. It serves as the company's charter or constitution and defines the scope of its activities. Here's a detailed note on the MOA:
Contents of Memorandum of Association:
Name Clause: This clause states the name of the company, which should end with words like "Limited" or "Ltd." for a public limited company and "Private Limited" or "Pvt. Ltd." for a private limited company.
https://seribangash.com/article-of-association-is-legal-doc-of-company/
Registered Office Clause: It specifies the location where the company's registered office is situated. This office is where all official communications and notices are sent.
Objective Clause: This clause delineates the main objectives for which the company is formed. It's important to define these objectives clearly, as the company cannot undertake activities beyond those mentioned in this clause.
www.seribangash.com
Liability Clause: It outlines the extent of liability of the company's members. In the case of companies limited by shares, the liability of members is limited to the amount unpaid on their shares. For companies limited by guarantee, members' liability is limited to the amount they undertake to contribute if the company is wound up.
https://seribangash.com/promotors-is-person-conceived-formation-company/
Capital Clause: This clause specifies the authorized capital of the company, i.e., the maximum amount of share capital the company is authorized to issue. It also mentions the division of this capital into shares and their respective nominal value.
Association Clause: It simply states that the subscribers wish to form a company and agree to become members of it, in accordance with the terms of the MOA.
Importance of Memorandum of Association:
Legal Requirement: The MOA is a legal requirement for the formation of a company. It must be filed with the Registrar of Companies during the incorporation process.
Constitutional Document: It serves as the company's constitutional document, defining its scope, powers, and limitations.
Protection of Members: It protects the interests of the company's members by clearly defining the objectives and limiting their liability.
External Communication: It provides clarity to external parties, such as investors, creditors, and regulatory authorities, regarding the company's objectives and powers.
https://seribangash.com/difference-public-and-private-company-law/
Binding Authority: The company and its members are bound by the provisions of the MOA. Any action taken beyond its scope may be considered ultra vires (beyond the powers) of the company and therefore void.
Amendment of MOA:
While the MOA lays down the company's fundamental principles, it is not entirely immutable. It can be amended, but only under specific circumstances and in compliance with legal procedures. Amendments typically require shareholder
Set off and carry forward of losses and assessment of individuals.pptx
Ron Barstow 1
1. Ron Barstow Architectural Design
Architect & Planning 2009
Architectural Concepts RELEVANT EXPERIENCE
Extensive experience providing innovative architectural design and
Site Planning planning for industrial, commercial, & institutional facilities. Working
with high level management and production personnel to develop
Master Planning master plans, provide programming for new facilities, and develop
Green Technology concepts based on the corporate strategic plans. Excellent problem
solving abilities and presentation skills.
DOE Facilities CAMPUS ARCHITECT University of TN
RESIDENT ARCHITECT at ORNL US Dept of Energy
Military Base FEDERAL EXPERIENCE providing site development planning, site reduction
Industrial Site and commercial development inside the Oak Ridge Reservation.
MILITARY SITE RESTORATION AND REUSE developing concepts and
Manufacturing marketing strategies for site reuse. Environmental Site Restoration.
INDUSTRIAL SITE PLANNING experience with large Industrial site
Research subdivision & site infrastructure design.
Higher ED TEAM PLAYER experienced working with large scale Federal Sites.
HANDS ON APPROACH to develop creative solutions to complex problems.
EXCELLENT PROBLEM SOLVING ABILITIES AND PRESENTATION
SKILLS.
VA Hospital Renovations Sky bridge model
BWXT BECTEL – Concept design for New Corporate Center and major plant
reconstruction proposal. This presentation provided the spark to enabled funding for this
Department of Energy third party development).
VA Hospital Renovations Sky bridge model CONSULTING ARCHITECT, SAVANNAH RIVER NUCLEAR
SOLUTIONS
Aiken SC 2007-2009
Architectural Design, Detailing, Specifications, Bulk Material Quantities, &
Penetration Seal Studies related to the Construction Documents Package
Tasks included detailed design coordination of 2D Construction Drawing
package with all Engineering Disciplines and with the 3D Model
Ron Barstow extractions.
1110 Buena Road Construction Documentation
Knoxville, TN 37919 Architectural Support
865.584.1248 Developed Concept Visualization
phone/fax
Quick Study Sketch-up Models
2. Ron Barstow CONSULTING ARCHITECT
Architectural Concepts
CONSULTING ARCHITECT, BARSTOW & ASSOCIATES
Knoxville TN 2001-2007 (Concurrent projects with CH2Mhill/Lockwood Greene)
Providing Architectural Concepts/ for Industrial & Commercial Clients including
community projects, banks & residential work. Many of these projects were in
support of other AE work.
MIXED USE RETAIL AND RESTURANT RENOVATION PROJECT FOR DAUGHERTYS INC
Daugherty's Renovation Complete 3-D model of the existing facility including the potential build out for the completed
facility. Building Code Review (50,000SF Historic Building)
PACE SQUARE RETAIL CENTER- Barstow & Associates
Provided 3D models to develop the conceptual design for 35,000SF Retail Center. Work included
Kuumba Festival Staging at the Knoxville an integrated design approach of traffic and parking on several sites to enhance the retail
Museum of Art experience in the new center. Scope of project included concepts through construction documents
CONSULTING ARCHITECT, FLUOR
Greenville SC 2001- 2003 (Concurrent work with Barstow & Associates)
Working with GMP (Good Manufacturing Process) providing Architectural
Industrial Design support to several Bio-pharma and Bio-tech project teams.
Concept Design Layout
Design Development
Detailed Design Development
•Design Development package for building exterior skin.
•Concept Design Layout for Vaccine Development Lab.
•Detailed design development CAD layouts.
•structural suspended ceiling systems
•General interior and site layout concepts.
Concept Rendering for Alex Hailey Memorial
Park Nets $50,000 from state tourism bureau
Ron Barstow
1110 Buena Road
Knoxville, TN 37919 Wyeth ST. Louis
865.584.1248 Facility Layout
phone/fax
3. Ron Barstow LOCKWOOD GREENE
Architectural Concepts
CH2MHILL
CONSULTING ARCHITECT, LOCKWOOD GREENE,
Atlanta GA 1995 to 2005
Principal conceptual designer providing master planning and architectural
programming to corporate clients. Worked on site with clients and staff for
direct client input to the planning process. Produced planning documents,
color renderings graphics and construction documents as required. Typical
projects include conceptual design for multiple design build Navy projects,
General Manufacturing, Industrial Site Planning as well as the following
sampling of manufacturing projects:
LOCKHEED MARTIN AERONAUTICS COMPANY -
Marietta, GA. 2001-2002 (F-22 assembly)
CRYO-LIFE Entrance Lobby Design concept for space
between buildings
CH2MHill- San Francisco CA 2004 (Design concept
for New Urban Town on an existing Brownfield
military base site) Model View 1
SAEP site master plan & concept site study and assessment for Stratford Military Engine Facility
CH2MHill- San Francisco CA 2004 (Design concept
for New Urban Town on an existing Brownfield
military base site) Model View 2 SAEP site master plan section
LUCENT TECHNOLOGIES –Interior View LUCENT TECHNOLOGIES - Atlanta Works - Norcross, GA. 1997-1999 (Programming
Atlanta Works - Norcross, GA. and Design)
Ron Barstow
1110 Buena Road
Knoxville, TN 37919
865.584.1248
phone/fax THE BOEING COMPANY - ST Louis, Mo. 1998 (New Production
Facilities for the F-18 Hornet)
4. Ron Barstow RESIDENT ARCHITECT ORNL
Facilities Architect
SITE ARCHITECT, OAK RIDGE NATIONAL LABORATORY,
Oak Ridge, TN, 1986 to 1995.
As resident architect it was my responsibility to develop design concepts,
secure funding and implement infrastructure projects. Site Development
activities included relocation of parking and preparing sites for future
development. Including earthwork calculations, erosion control concepts,
code review and construction over site all expense projects.
Expense projects were bundled intro unit price contracts and implemented
is a range of $200,000 to $2,000,000 per year.
Led Americans with Disabilities Act Program (ADA)
Provided Design Concepts & Master Planning
GIS Mapping
Parking Decentralization plan
Pro Active Design / Environmental Oversight
ORNL - OAK RIDGE
NATIONAL LAB
RON BARSTOW ARCHITECT ORNL 1986-1995
MODULAR LABORATORY PROJECT
GIS Mapping Project
ORNL R&D Lab Concept
HFIR PARKING EXPANSION OPENS UP
LAND FOR NEW BUILDINGS.
NORTH PARKING EXPANSION IS DESIGNED TO
SERVE AS A CONSTRUCTION LAYDOWN AREA
FOR FUTURE 2000 AREA DEMO PROJECTS. MODULAR BRIDGE CONSTRUCTION
Ron Barstow
1110 Buena Road WEST PARKING EXPANSION IS DESIGNED
Knoxville, TN 37919 TO RELOCATE CARS TO THE AREA
865.584.1248 PERIMETER. OPENING UP THE CENTER
phone/fax SITE FOR FUTURE DEVELOPMENT.
HANDS ON PROBLEM SOLVING
5. Ron Barstow UT CAMPUS ARCHITECT
Campus Architect
CAMPUS ARCHITECT, THE UNIVERSITY OF TENNESSEE
Knoxville, TN, 1983 to 1986.
As Campus Architect it was my responsibility to develop campus projects
for the campus administrators. I worked with the Physical Plant
Engineering Department and outside consultants to provide design, cost
estimates, and construction coordination. Responsibilities included leading
the implementation of campus renovation projects supporting the
Distinguished Scientists Chair of Excellence Program.
1. Directed Outside Engineering &
UT Pavilion concept Facilities Evaluation Program.
2. Provided Design & Master Planning
3. Managed in house
engineering activities.
UT Pavilion concept
Provided visual walkthrough of
design concept for project
announcement
National Science Foundation /
Birdseye View UT Center for Computational
NSF/UTK Computer Sciences Knoxville TN
Science Lab
CONSULTING ARCHITECT
Consulting Architect/Contract Engineering 1976 to 1983
Lockwood Green, Atlanta, GA. Responsible for the overall conceptual design of
Pratt and Whitney Aircraft Parts Manufacturing Plant and office, consulting with
clients, providing on-the-spot sketches, and construction site models. He also
provided architectural assistance with the Saudi Arabia Naval Base and the
PRATT & WHITNEY - Columbus, GA. 1981- Kuwait Air Defense System.
1982 (700,000 SF aircraft parts facility)
World’s Fair, 1982, Knoxville, TN. Provided architectural design and graphics
design for support buildings, signage, and the main gateway structures. This
work included creation of relevant symbols and graphic images, site models,
renderings, and the construction of a full-size prototype entry gate structure for
wind load testing and analysis.
Gateway Model Gateway test structure Wind Symbol
Ron Barstow Boeing Engineering and Construction, Oak Ridge, TN. Architectural design
1110 Buena Road Helicopter assembly plant
Knoxville, TN 37919 Aircraft Cleaning Sealing and Painting Facility
865.584.1248 Autoclave Enclosure.
phone/fax
6. Ron Barstow INTERN ARCHITECT
Architectural Concepts
MORTON & SWEETSER - INTERN ARCHITECT,
Knoxville TN, 1973 to 1976.
Morton and Sweetser Architects- Architectural Design - Schools, Branch
Banks, Elderly Housing and Commercial
Draftsmen, Designer, and Job-captain for various in house projects
Retail Development Proposal, Maryville TN Solar Bank. Knoxville TN Elderly Housing Proposal Union Bank Jellico, TN
UNIVERSITY OF TENNESSEE
SCHOOL OF ARCHITECTURE UT SCHOOL OF ARCHITECTURE
EDUCATION Highlights
BS, Architecture, University of Tennessee,
(Five year Professional Degree) 1974
UT Study of European town planning (France, Italy,
Transmodular Factory Systems_1 Denmark, Sweden & Finland) 1970
UT Earthquake studies ( Managua, Nicaragua) 1973
• 5th year thesis study project Modular Construction
• Truck mounted modular assembly plant.
Transmodular Factory Systems_2 • 8 X 16 foot unit size for light weight placement. Interior view of Prototype
Transmodular Factory Systems_3
Two Module set Five Module set Eight Module set
Transmodular Factory Systems_4
Model view of Prototype Exterior view of Prototype
CERTIFICATIONS:
Registered Architect, Tennessee, (# 12488) 1978
NCARB, (# 27157) 1978
Graduate University of Tennessee School of Architecture Professional
Transmodular Factory Systems_5
Program December 1974
Ron Barstow
1110 Buena Road Harvard School of design/continuing education (new town urban design &
Knoxville, TN 37919 retail planning) 2001
865.584.1248
phone/fax
AIA May 2008