DP800 series includes single output, two output and three output programmable linear DC power supply. They have pure output, excellent performance indicators, multiple analysis functions, rich interfaces, and can meet the diverse testing needs.
SS9620 PV Cell Evaluation System
Overall Evaluation System Capable of Measuring
Solar Cell Dark Current
l Dark current measurement of large solar cell modules by connecting the booster unit 46015
l Precise parallel resistance measurement and bypass diode
evaluation by using the reverse polarity unit
l Maximum output power of 300W (300V/±1A, 30V/±10A)
l High speed measurement at 100 points in 5ms
l 50μs to 6s/point that supports various kinds of solar cells
l Sampling for short-pulsed, middle-pulsed and long-pulsed light
l 3-slope linear sweep function to measure finely around Isc,
Pmax and Voc
Datasheet Fluke AC Measurement Standard. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
SS9620 PV Cell Evaluation System
Overall Evaluation System Capable of Measuring
Solar Cell Dark Current
l Dark current measurement of large solar cell modules by connecting the booster unit 46015
l Precise parallel resistance measurement and bypass diode
evaluation by using the reverse polarity unit
l Maximum output power of 300W (300V/±1A, 30V/±10A)
l High speed measurement at 100 points in 5ms
l 50μs to 6s/point that supports various kinds of solar cells
l Sampling for short-pulsed, middle-pulsed and long-pulsed light
l 3-slope linear sweep function to measure finely around Isc,
Pmax and Voc
Datasheet Fluke AC Measurement Standard. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Datasheet Fluke 5080A Multi-Product Calibrator MegOhm Meter Calibration Option Extended Specification. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The EPO series is a line of epoch-making power supplies, using new method of power amplifier unit.
They provide high efficiency (approx. 76%) unimaginable with previous products, while being even more light weight and compact. These epoch-making AC/DC power supplies feature even further improvements to standard features such as the flexibility, high output stability , and powerful supplies of electric power that NF power supplies are known for.
Nihon Denkei
Omicron CMC 256plus High Precision Relay Test Set and Universal Calibrator Da...Angus Sankaran
Protection test set and universal calibrator in one device
Testing of all relay generations - electromechanical, static, numerical, IEC 61850
Integrated network for testing IEC 61850 IEDs
5½-digit DMM with twin A/D converters
offering two-channel synchronous measurement
● New measurement environment by twin A/D converters
● Double the throughput by Ach/Bch synchronous measurement
● Wide dynamic range of 5½ digits on both Ach and Bch
● Wider current measurement range and parallel measurement with voltage or temperature
Ach: 10pA to 2A Bch: 100µA to 10A
● A variety of interfaces
7352A: USB, GPIB, RS-232 7352E: USB
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
The 6247C/6247G is a DC voltage current source/monitor designed for evaluating high voltage semiconductors and LED luminaires that demand high efficiency and low power consumption, capable of outputting voltage up to +250 V and current up to ±320 mA. It provides high accuracy of ±0.02 % with 4½-digit source resolution and 5½-digit measurement resolution.
The 6247C/6247G features the well-established VSIM, ISVM, sweep and pulse generation functions. Also, leak current measurement up to 10 pA is possible. In addition, it is equipped with the various types of sweep functions such as linear, fixed, random and two slope linear sweep functions, the pulse measurement function with the minimum pulse width of 50 μs, the micro voltage and current measurement function with the minimum resolution of 10 μV or 10 pA, and the suspend function that controls the optimized output status. By using these functions, the 6247C/6247G can be widely used for evaluating or testing semiconductor and other electronic components in R&D fields and production lines.
http://www.n-denkei.com/singapore/
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
NF Programmable Current Amplifier E ca5350
Support a variety of small current measurement
Application: Small current measurements, using optical sensors (PD, APD, PMT) Photodetection with PMT Photodiode Scanning tunneling Microscopy spectroscopy quantum electronics semiconductors MEMS
Catalogue Timer Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
In this short presentation we'll introduce the PCM-7140 including a product overview, what's in the box, how to set up the PCM-7140 Laser Diode Driver Module and solutions to some common problems.
https://directedenergy.com/product/pcm-7140-1/
https://directedenergy.com/product/pcm-7140-10/
https://directedenergy.com/product/pcm-7140-200/
The PCM-7140 is a series of compact pulsed current sources designed to drive laser diodes, bars, arrays, or any low impedance load. The key specifications are output current from .1 A to 200 A, rise and fall times below 1 μs, pulse widths from 1 μs to 13 ms, pulse repetition rates from single shot to 100 kHz, and forward voltage from 0 V to 60 V.
The PCM-7140 output current may be set with an internal potentiometer or an external analog voltage. The pulse width is controlled with an external trigger source.
The system requires two DC supplies for operation: 12 V for housekeeping and a voltage ≤ 20 V above the laser diode’s forward voltage.
The laser or load is connected to the PCM-7140 with a 100 cm length of 18 AWG twisted pair cable (included). This same cable has the DC input connection from the high voltage power supply.
The PCM-7140 module is liquid cooled with a liquid temperature of 11 °C to 22 °C with a flow rate of 6 liters per minute. The connection type is 3/8” tubing.
Features
Pulsed Current Monitor Output
Liquid cooling for high average power applications
Applications
The PCM-7140 is designed to drive laser diodes, bars, arrays, or any low-impedance load with a forward voltage drop up to 60 V for laboratory, research and industrial application.
Datasheet Fluke 5080A Multi-Product Calibrator MegOhm Meter Calibration Option Extended Specification. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
The EPO series is a line of epoch-making power supplies, using new method of power amplifier unit.
They provide high efficiency (approx. 76%) unimaginable with previous products, while being even more light weight and compact. These epoch-making AC/DC power supplies feature even further improvements to standard features such as the flexibility, high output stability , and powerful supplies of electric power that NF power supplies are known for.
Nihon Denkei
Omicron CMC 256plus High Precision Relay Test Set and Universal Calibrator Da...Angus Sankaran
Protection test set and universal calibrator in one device
Testing of all relay generations - electromechanical, static, numerical, IEC 61850
Integrated network for testing IEC 61850 IEDs
5½-digit DMM with twin A/D converters
offering two-channel synchronous measurement
● New measurement environment by twin A/D converters
● Double the throughput by Ach/Bch synchronous measurement
● Wide dynamic range of 5½ digits on both Ach and Bch
● Wider current measurement range and parallel measurement with voltage or temperature
Ach: 10pA to 2A Bch: 100µA to 10A
● A variety of interfaces
7352A: USB, GPIB, RS-232 7352E: USB
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
Pemesanan produk, hubungi PT Siwali Swantika melalui WhatsApp, Jakarta : 0811-1519-949 (chat only) | Surabaya : 0811-1519-948 (chat only). Kunjungi website kami di www.siwali.com, untuk detail informasi spesifikasi dan model alat.
The 6247C/6247G is a DC voltage current source/monitor designed for evaluating high voltage semiconductors and LED luminaires that demand high efficiency and low power consumption, capable of outputting voltage up to +250 V and current up to ±320 mA. It provides high accuracy of ±0.02 % with 4½-digit source resolution and 5½-digit measurement resolution.
The 6247C/6247G features the well-established VSIM, ISVM, sweep and pulse generation functions. Also, leak current measurement up to 10 pA is possible. In addition, it is equipped with the various types of sweep functions such as linear, fixed, random and two slope linear sweep functions, the pulse measurement function with the minimum pulse width of 50 μs, the micro voltage and current measurement function with the minimum resolution of 10 μV or 10 pA, and the suspend function that controls the optimized output status. By using these functions, the 6247C/6247G can be widely used for evaluating or testing semiconductor and other electronic components in R&D fields and production lines.
http://www.n-denkei.com/singapore/
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
NF Programmable Current Amplifier E ca5350
Support a variety of small current measurement
Application: Small current measurements, using optical sensors (PD, APD, PMT) Photodetection with PMT Photodiode Scanning tunneling Microscopy spectroscopy quantum electronics semiconductors MEMS
Catalogue Timer Idec
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
In this short presentation we'll introduce the PCM-7140 including a product overview, what's in the box, how to set up the PCM-7140 Laser Diode Driver Module and solutions to some common problems.
https://directedenergy.com/product/pcm-7140-1/
https://directedenergy.com/product/pcm-7140-10/
https://directedenergy.com/product/pcm-7140-200/
The PCM-7140 is a series of compact pulsed current sources designed to drive laser diodes, bars, arrays, or any low impedance load. The key specifications are output current from .1 A to 200 A, rise and fall times below 1 μs, pulse widths from 1 μs to 13 ms, pulse repetition rates from single shot to 100 kHz, and forward voltage from 0 V to 60 V.
The PCM-7140 output current may be set with an internal potentiometer or an external analog voltage. The pulse width is controlled with an external trigger source.
The system requires two DC supplies for operation: 12 V for housekeeping and a voltage ≤ 20 V above the laser diode’s forward voltage.
The laser or load is connected to the PCM-7140 with a 100 cm length of 18 AWG twisted pair cable (included). This same cable has the DC input connection from the high voltage power supply.
The PCM-7140 module is liquid cooled with a liquid temperature of 11 °C to 22 °C with a flow rate of 6 liters per minute. The connection type is 3/8” tubing.
Features
Pulsed Current Monitor Output
Liquid cooling for high average power applications
Applications
The PCM-7140 is designed to drive laser diodes, bars, arrays, or any low-impedance load with a forward voltage drop up to 60 V for laboratory, research and industrial application.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng Catalog Timer đầy đủ và chi tiết cấu tạo các dòng timer của nhà sản xuất Idec Izumi đến từ Nhật bản.
Quý khách có nhu cầu mua hàng hoặc hợp tác cùng chúng tôi xin vui lòng liên hệ theo địa chỉ :
CÔNG TY CỔ PHẦN HẠO PHƯƠNG
Trụ sở chính:
Địa chỉ: Số 88 đường Vĩnh Phú 40, Kp. Hòa Long, P. Vĩnh Phú, Thuận An, Bình Dương.
Văn phòng Hà Nội:
Địa chỉ: Số 95 TT4 - KĐT Mỹ Đình Sông Đà - Phường Mỹ Đình - Q. Nam Từ Liêm - Hà Nội
Chi nhánh Cambodia:
Địa chỉ: The Park Land SenSok, Borey Chip Mong, House Number 22, P11.Sangkat Phnom Penh Thmey, Khan San Sok, Phnom Penh.
Email: cs@haophuong.com - Website: haophuong.com
Facebook: https://www.facebook.com/haophuongcompany/
HOTLINE: 1800 6547
Idec timers idec
Catalog Idec, Catalog,
Catalog Thiết Bị Điện Idec, Catalog Thiết Bị Điện,
Catalog Điện Công Nghiệp Idec, Catalog Điện Công Nghiệp,
http://dienhathe.com,
Chi tiết các sản phẩm khác của Idec tại https://dienhathe.com
Xem thêm các Catalog khác của Idec tại https://dienhathe.info
Để nhận báo giá sản phẩm Idec vui lòng gọi: 0907.764.966
Datasheet Fluke 52102A. Hubungi PT. Siwali Swantika 021-45850618PT. Siwali Swantika
Datasheet Fluke Transconductance Amplifier. Informasi lebih detail hubungi PT. Siwali Swantika, Jakarta Office : 021-45850618 atau Surabaya Office : 031-8421264
Earth Leakage Relay | Motor Protection Relay - GIC IndiaPrasadPurohit1988
GIC’s manufacture earth leakage relay that innovative product monitors and detects Earth leakage faults so as to protect your power systems and equipment.
The DT4281 is our top-of-the-line high-precision 60000 count digital multimeter with all of the functions and features required for advanced testing in complex power and electrical applications.
2600T Series Pressure Transmitter Model 261GS Gauge Model 261AS Absolute stan...Michael Sun
■ Base accuracy: ±0.15 %
■ Span limits
– 0.3 to 60000 kPa; 1.2 inH2O to 8700 psi
– 0.3 to 3000 kPa abs; 2.25 mmHg to 435 psia
■ Reliable sensing system coupled with very latest
digital technologies
– provides large turn down ratio up to 20:1
■ Stainless steel housing
– optimized for rough environment
– extreme robust
2600T Series Pressure Transmitter Model 261GS Gauge Model 261AS Absolute stan...Michael Sun
■ Base accuracy: ±0.15 %
■ Span limits
– 0.3 to 60000 kPa; 1.2 inH2O to 8700 psi
– 0.3 to 3000 kPa abs; 2.25 mmHg to 435 psia
■ Reliable sensing system coupled with very latest
digital technologies
– provides large turn down ratio up to 20:1
■ Stainless steel housing
– optimized for rough environment
– extreme robust
Similar to RIGOL Programmable linear DC power supply DP800 Series (20)
Multi-channel low noise arbitrary waveform generation system
Multi-channel precision low noise DC voltage source
Multi-channel low noise amplification system
PBZ Series Intelligent Bi-Polar Power Supplies
The PBZ series is a bipolar type DC regulated power source that can continuously change both + and – polarities passing through 0 without changing the output terminal.
By adopting a “Switching + Linear” system, the PBZ is able to realize both drastic weight reduction as well as high speed and low noise operation. Since operation covers 4 quadrants, power can be both supplied (source) and absorbed (sink). The PBZ can also drive inductive or capacitive loads. The unit also equips a signal generator function which enables waveform and sequence creation. The PBZ is also capable of synchronized operation which is required for voltage variation tests, and it can also be expanded for large current applications through master-slave parallel operation.
Inspect solar panel bypass diodes for opens and shorts in broad daylight without covering panels
INSPECT SOLAR PANEL BYPASS DIODES FOR OPENS AND SHORTS IN BROAD DAYLIGHT WITHOUT COVERING PANELS
Traditionally, bypass diodes can only be inspected for good working condition at night or when power is not being generated by the solar panels in order to verify that any applied current is guided past the solar cells.
With the FT4310, you can detect for open faults even when the sun is out without covering the panels.
Testing can also be performed at night.
*Testing for short-circuit faults can only be performed during the day.
The TD-9000T is a digital indicator for load management that supports two inputs, load (load cell) and stroke (displacement gauge).
High-speed A/D conversion of 25,000 times/sec and equipped with a 4.3-inch touchscreen monitor in DIN1/4 (92 x 92) size. While being high-end, it is a high-performance model that realizes a low price.
Waveforms during measurement can be checked in real time. Widely usable from daily monitoring to verification of processing data.
RIGOL Programmable linear DC power supply DP800 Series
1. RIGOL TECHNOLOGIES, INC.
DP800
Programmable Linear DC Power Supply
Series
DP832A/DP832: 3 outputs, 30V/3A || 30V/3A, 5V/3A, total power up to 195W
DP831A/DP831: 3 outputs, 8V/5A || 30V/2A, -30V/2A, total power up to 160W
DP821A/DP821: 2 outputs, 60V/1A || 8V/10A, with remote Sense,
total power up to 140W
DP811A/DP811: 1 output, 20V/10A (Low Range), 40V/5A (High Range),
with remote Sense, total power up to 200W
Low ripple and noise:
DP832A/DP832/DP831A/DP831/DP821A/DP821: <350uVrms/2mVpp
DP811A/DP811: <350uVrms/3mVpp
Excellent linear regulation rate and load regulation rate
Fast transient response time: <50μs
Some channels are isolated
Standard OVP/OCP/OTP protection functions
Standard timing output
Built-in V,A,W measurements and waveform display
Independent control for each channel
Support more advanced functions: timer and delay output(standard),
recorder/analyzer/monitor/trigger(standard in models with "A" and optional in other models)
3.5 inch TFT display
Various interfaces: USB Host&Device(standard), USB-GPIB (optional),
LAN/RS232/Digital IO(standard in models with "A" and optional in other models)
2. Design Features
Product Dimensions: Width × Height × Depth = 239mm x 157mm x 418mm
Weight: 9.75kg (DP831A)
Observable Clean Stable Reliable Affordable
Typical Applications
● R&D lab general purpose testing
● Quality control and assessment
● Pure power for RF/MW circuits or components
● Power supply for automobile electronic circuit test
LCD Display
Output Terminal
Advanced Function Area
Display Switching
Menu Softkey
Power Button
Channel Setting
Parameter Input
Complete Connectivity
Wide-screen Display, User-friendly Interface, Easy Operation
● Production automation testing
● Device or circuit characteristic verification
and troubleshooting
● Educational experiment
4. Specifications
All the specifications are guaranteed when the instrument has been working for more than 30 minutes under the specified operation
temperature. Unless otherwise noted, the specifications are applicable to all the channels of the specified model.
DP832A/DP831A/DP821A/DP811A Specifications
Model Number of Channels
DP832A 3
DP831A 3
DP821A 2
DP811A 1 (two output ranges)
DC Output (0℃ to 40℃ )
Channel (Range) Voltage/Current OVP/OCP
DP832A
CH1
CH2
CH3
0 to 30V/0 to 3A
0 to 30V/0 to 3A
0 to 5V/0 to 3A
1mV to 33V/1mA to 3.3A
1mV to 33V/1mA to 3.3A
1mV to 5.5V/1mA to 3.3A
DP831A
CH1
CH2
CH3
0 to 8V/0 to 5A
0 to 30V/0 to 2A
0 to -30V/0 to 2A
1mV to 8.8V/0.1mA to 5.5A
1mV to 33V/0.1mA to 2.2A
-1mV to -33V/0.1mA to 2.2A
DP821A
CH1
CH2
0 to 60V/0 to 1A
0 to 8V/0 to 10A
1mV to 66V/0.1mA to 1.1A
1mV to 8.8V/1mA to 11A
DP811A
Range1
Range2
0 to 20V/0 to 10A
0 to 40V/0 to 5A
1mV to 22V/0.1mA to 11A
1mV to 44V/0.1mA to 5.5A
Load Regulation Rate ± (Output Percentage + Offset)
Voltage <0.01% + 2mV
Current <0.01% + 250μA
Linear Regulation Rate ± (Output Percentage + Offset)
Voltage <0.01% + 2mV
Current <0.01% + 250μA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage
DP832A/DP831A/DP821A: <350μVrms/2mVpp
DP811A: <350μVrms/3mVpp
Normal Mode Current <2mArms
Annual Accuracy [1]
(25℃ ± 5℃ ) ± (Output Percentage + Offset)
Channel
Programming Readback
Voltage Current Voltage Current
DP832A
CH1
CH2
CH3
0.05% + 20mV
0.05% + 20mV
0.1% + 5mV
0.2% + 5mA
0.2% + 5mA
0.2% + 5mA
0.05% + 10mV
0.05% + 10mV
0.1% + 5mV
0.15% + 5mA
0.15% + 5mA
0.15% + 5mA
DP831A
CH1
CH2
CH3
0.1% + 5mV
0.05% + 20mV
0.05% + 20mV
0.2% + 10mA
0.2% + 5mA
0.2% + 5mA
0.1% + 5mV
0.05% + 10mV
0.05% + 10mV
0.2% + 10mA
0.1% + 5mA
0.1% + 5mA
DP821A
CH1
CH2
0.1% + 25mV
0.05% + 10mV
0.2% + 10mA
0.2% + 10mA
0.1% + 25mV
0.05% + 5mV
0.15% + 10mA
0.15% + 10mA
DP811A CH1 0.05% + 10mV 0.1% + 10mA 0.05% + 10mV 0.1% + 10mA
5. Resolution
Channel
Programming Readback Display
Voltage Current Voltage Current Voltage Current
DP832A
CH1
CH2
CH3
1mV
1mV
1mV
1mA
1mA
1mA
0.1mV
0.1mV
0.1mV
0.1mA
0.1mA
0.1mA
1mV
1mV
1mV
1mA
1mA
1mA
DP831A
CH1
CH2
CH3
1mV
1mV
1mV
0.3mA
0.1mA
0.1mA
0.1mV
0.1mV
0.1mV
0.1mA
0.1mA
0.1mA
1mV
1mV
1mV
1mA
1mA
1mA
DP821A
CH1
CH2
1mV
1mV
0.1mA
1mA
1mV
1mV
0.1mA
1mA
1mV
1mV
0.1mA
1mA
DP811A CH1 1mV 0.5mA 0.1mV 0.1mA 1mV 1mA
Transient Response Time
Less than 50μs for output voltage to recover to within 15mV following a change in output current from full load to half load or vice
versa.
Command Processing Time [2]
<118ms
OVP/OCP
Accuracy ± (Output Percentage + Offset) 0.5% + 0.5V/0.5% + 0.5A
Voltage Programming Control Speed (1% within the total variation range)
Channel
Rise Fall
Full Load No Load Full Load No Load
DP832A
CH1
CH2
CH3
<50ms
<50ms
<15ms
<33ms
<38ms
<14ms
<46ms
<46ms
<24ms
<400ms
<400ms
<100ms
DP831A
CH1
CH2
CH3
<18ms
<33ms
<35ms
<17ms
<36ms
<42ms
<20ms
<44ms
<45ms
<200ms
<400ms
<400ms
DP821A
CH1
CH2
<110ms
<15ms
<30ms
<15ms
<110ms
<20ms
<800ms
<400ms
DP811A CH1 <45ms <42ms <51ms <1089ms
Temperature Coefficient per ℃ (Output Percentage + Offset)
Channel Voltage Current
DP832A
CH1
CH2
CH3
0.01% + 5mV
0.01% + 5mV
0.01% + 2mV
0.01% + 2mA
0.01% + 2mA
0.01% + 2mA
DP831A
CH1
CH2
CH3
0.01% + 2mV
0.01% + 2mV
0.01% + 2mV
0.02% + 3mA
0.02% + 3mA
0.02% + 3mA
DP821A
CH1
CH2
0.01% + 3mV
0.01% + 3mV
0.02% + 3mA
0.02% + 3mA
6. DP811A CH1 0.01% + 3mV 0.02% + 3mA
Stability [3]
± (Output Percentage + Offset)
Channel Voltage Current
DP832A
CH1
CH2
CH3
0.02% + 2mV
0.02% + 2mV
0.01% + 1mV
0.05% + 2mA
0.05% + 2mA
0.05% + 2mA
DP831A
CH1
CH2
CH3
0.03% + 1mV
0.02% + 2mV
0.02% + 2mV
0.1% + 3mA
0.05% + 1mA
0.05% + 1mA
DP821A
CH1
CH2
0.02% + 1mV
0.02% + 1mV
0.1% + 1mA
0.1% + 1mA
DP811A CH1 0.02% + 1mV 0.1% + 1mA
Mechanical
Dimensions 239mm(W) x 157mm(H) x 418mm(D)
Weight
DP832A: 10.5kg
DP831A: 9.75kg
DP821A: 10.0kg
DP811A: 10.3kg
Power
AC Input (50Hz to 60Hz) 100Vac ± 10%, 115Vac ± 10%, 230Vac ± 10% (maximum 250Vac)
Maximum Input Power
DP832A: 521VA
DP831A: 416VA
DP821A: 450VA
DP811A: 503VA
I/O
USB DEVICE 1
USB HOST 1
LAN 1
RS232 1
Digital IO 1
USB-GPIB 1 (Option, extend a GPIB interface using the USB-GPIB interface converter)
Rear Output Interface 1 for DP811A
Environment
Cooling Method Fan Cooling
Working Temperature 0℃ to 40℃
Storage Temperature -40℃ to 70℃
Humidity 5% to 80% relative humidity
Altitude Below 1500m
Note[1]
: The accuracy parameters are acquired via calibration under 25℃ after 1-hour warm-up.
Note[2]
: The maximum time required for the output to change accordingly after receiving the APPLy and SOURce commands.
Note[3]
: The variation of the output within 8 hours after 30-minute warm-up when the load circuit and environment temperature
are constant.
7. DP832/DP831/DP821/DP811 Specifications
Model Number of Channels
DP832 3
DP831 3
DP821 2
DP811 1 (two output ranges)
DC Output (0℃ to 40℃ )
Channel (Range) Voltage/Current OVP/OCP
DP832
CH1
CH2
CH3
0 to 30V/0 to 3A
0 to 30V/0 to 3A
0 to 5V/0 to 3A
10mV to 33V/1mA to 3.3A
10mV to 33V/1mA to 3.3A
10mV to 5.5V/1mA to 3.3A
DP831
CH1
CH2
CH3
0 to 8V/0 to 5A
0 to 30V/0 to 2A
0 to -30V/0 to 2A
10mV to 8.8V/1mA to 5.5A
10mV to 33V/1mA to 2.2A
-10mV to -33V/1mA to 2.2A
DP821
CH1
CH2
0 to 60V/0 to 1A
0 to 8V/0 to 10A
10mV to 66V/10mA to 1.1A
10mV to 8.8V/10mA to 11A
DP811
Range1
Range2
0 to 20V/0 to 10A
0 to 40V/0 to 5A
10mV to 22V/10mA to 11A
10mV to 44V/10mA to 5.5A
Load Regulation Rate ± (Output Percentage + Offset)
Voltage <0.01% + 2mV
Current <0.01% + 250μA
Linear Regulation Rate ± (Output Percentage + Offset)
Voltage <0.01% + 2mV
Current <0.01% + 250μA
Ripples and Noise (20Hz to 20MHz)
Normal Mode Voltage
DP832/DP831/DP821: <350μVrms/2mVpp
DP811: <350μVrms/3mVpp
Normal Mode Current <2mArms
Annual Accuracy [1]
(25℃ ± 5℃ ) ± (Output Percentage + Offset)
Channel
Programming Readback
Voltage Current Voltage Current
DP832
CH1
CH2
CH3
0.05% + 20mV
0.05% + 20mV
0.1% + 5mV
0.2% + 5mA
0.2% + 5mA
0.2% + 5mA
0.05% + 10mV
0.05% + 10mV
0.1% + 5mV
0.15% + 5mA
0.15% + 5mA
0.15% + 5mA
DP831
CH1
CH2
CH3
0.1% + 5mV
0.05% + 20mV
0.05% + 20mV
0.2% + 10mA
0.2% + 5mA
0.2% + 5mA
0.1% + 5mV
0.05% + 10mV
0.05% + 10mV
0.2% + 10mA
0.1% + 5mA
0.1% + 5mA
DP821
CH1
CH2
0.1% + 25mV
0.05% + 10mV
0.2% + 10mA
0.2% + 10mA
0.1% + 25mV
0.05% + 5mV
0.15% + 10mA
0.15% + 10mA
DP811 CH1 0.05% + 10mV 0.1% + 10mA 0.05% + 10mV 0.1% + 10mA
8. Resolution
Channel
Programming Readback Display
Voltage Current Voltage Current Voltage Current
DP832
Standard
CH1
CH2
CH3
10mV
10mV
10mV
1mA
1mA
1mA
10mV
10mV
10mV
1mA
1mA
1mA
10mV
10mV
10mV
10mA
10mA
10mA
With the high-
resolution option
CH1
CH2
CH3
1mV
1mV
1mV
1mA
1mA
1mA
0.1mV
0.1mV
0.1mV
0.1mA
0.1mA
0.1mA
1mV
1mV
1mV
1mA
1mA
1mA
DP831
Standard
CH1
CH2
CH3
1mV
10mV
10mV
1mA
1mA
1mA
1mV
1mV
1mV
1mA
1mA
1mA
10mV
10mV
10mV
10mA
10mA
10mA
With the high-
resolution option
CH1
CH2
CH3
1mV
1mV
1mV
0.3mA
0.1mA
0.1mA
0.1mV
0.1mV
0.1mV
0.1mA
0.1mA
0.1mA
1mV
1mV
1mV
1mA
1mA
1mA
DP821
Standard
CH1
CH2
10mV
10mV
1mA
10mA
10mV
10mV
1mA
10mA
10mV
10mV
1mA
10mA
With the high-
resolution option
CH1
CH2
1mV
1mV
0.1mA
1mA
1mV
1mV
0.1mA
1mA
1mV
1mV
0.1mA
1mA
DP811
Standard CH1 10mV 10mA 1mV 1mA 10mV 10mA
With the high-
resolution option
CH1 1mV 0.5mA 0.1mV 0.1mA 1mV 1mA
Transient Response Time
Less than 50μs for output voltage to recover to within 15mV following a change in output current from full load to half load or vice
versa.
Command Processing Time [2]
<118ms
OVP/OCP
Accuracy ± (Output Percentage + Offset) 0.5% + 0.5V/0.5% + 0.5A
Voltage Programming Control Speed (1% within the total variation range)
Channel
Rise Fall
Full Load No Load Full Load No Load
DP832
CH1
CH2
CH3
<50ms
<50ms
<15ms
<33ms
<38ms
<14ms
<46ms
<46ms
<24ms
<400ms
<400ms
<100ms
DP831
CH1
CH2
CH3
<18ms
<33ms
<35ms
<17ms
<36ms
<42ms
<20ms
<44ms
<45ms
<200ms
<400ms
<400ms
DP821
CH1
CH2
<110ms
<15ms
<30ms
<15ms
<110ms
<20ms
<800ms
<400ms
DP811 CH1 <45ms <42ms <51ms <1089ms
Temperature Coefficient per ℃ (Output Percentage + Offset)
Channel Voltage Current
DP832
CH1
CH2
CH3
0.01% + 5mV
0.01% + 5mV
0.01% + 2mV
0.01% + 2mA
0.01% + 2mA
0.01% + 2mA
DP831
CH1
CH2
CH3
0.01% + 2mV
0.01% + 2mV
0.01% + 2mV
0.02% + 3mA
0.02% + 3mA
0.02% + 3mA
DP821
CH1
CH2
0.01% + 3mV
0.01% + 3mV
0.02% + 3mA
0.02% + 3mA
DP811 CH1 0.01% + 3mV 0.02% + 3mA
9. Stability [3]
± (Output Percentage + Offset)
Channel Voltage Current
DP832
CH1
CH2
CH3
0.02% + 2mV
0.02% + 2mV
0.01% + 1mV
0.05% + 2mA
0.05% + 2mA
0.05% + 2mA
DP831
CH1
CH2
CH3
0.03% + 1mV
0.02% + 2mV
0.02% + 2mV
0.1% + 3mA
0.05% + 1mA
0.05% + 1mA
DP821
CH1
CH2
0.02% + 1mV
0.02% + 1mV
0.1% + 1mA
0.1% + 1mA
DP811 CH1 0.02% + 1mV 0.1% + 1mA
Mechanical
Dimensions 239mm(W) x 157mm(H) x 418mm(D)
Weight
DP832: 10.5kg
DP831: 9.75kg
DP821: 10.0kg
DP811: 10.3kg
Power
AC Input
(50Hz-60Hz)
100Vac ± 10%, 115Vac ± 10%, 230Vac ± 10% (maximum 250Vac)
Maximum Power
DP832: 521VA
DP831: 416VA
DP821: 450VA
DP811: 503VA
I/O
USB DEVICE 1
USB HOST 1
LAN 1 (Option)
RS232 1 (Option)
Digital IO 1 (Option)
USB-GPIB 1 (Option, extend a GPIB interface using the USB-GPIB interface converter)
Rear Output Interface 1 for DP811
Environment
Cooling Method Fan Cooling
Working Temperature 0℃ to 40℃
Storage Temperature -40℃ to 70℃
Humidity 5% to 80% relative humidity
Altitude Below 1500m
Note[1]
: The accuracy parameters are acquired via calibration under 25℃ after 1-hour warm-up.
Note[2]
: The maximum time required for the output to change accordingly after receiving the APPLy and SOURce commands.
Note[3]
: The variation of the output within 8 hours after 30-minute warm-up when the load circuit and environment temperature
are constant.
10. Warranty
Three-year warranty, excluding accessories.
Ordering Information
Description Order NO.
Models
Programmable Linear DC Power Supply (Three-channel) DP832A
Programmable Linear DC Power Supply (Three-channel) DP832
Programmable Linear DC Power Supply (Three-channel) DP831A
Programmable Linear DC Power Supply (Three-channel) DP831
Programmable Linear DC Power Supply (Dual-channel) DP821A
Programmable Linear DC Power Supply (Dual-channel) DP821
Programmable Linear DC Power Supply (Single-channel) DP811A
Programmable Linear DC Power Supply (Single-channel) DP811
Standard
Accessories
Power Cord --
USB Cable CB-USBA-USBB-FF-150
Fuse 50T-032H 250V 3.15A (DP832A/DP832/DP811A/DP811)
Fuse 50T-025H 250V 2.5A (DP831A/DP831/DP821A/DP821)
--
Short-circuit Equipment (DP821A/DP821/DP811A/DP811) --
Quick Guide (Hard Copy) --
Digital I/O Interface Connecting Terminal Terminal-Digital I/O-DP800
Optional
Accessories
Provide high-resolution setting (for DP832/DP831/DP821/DP811; for the other
models, this is a standard accessory)
HIRES-DP800
Provide 4 trigger input and output channels (for DP832/DP831/DP821/DP811;
for the other models, this is a standard accessory)
DIGITALIO-DP800
Provide on-line monitor and analysis functions (for DP832/DP831/DP821/
DP811; for the other models, this is a standard accessory)
AFK-DP800
Provide RS232 and LAN communication interfaces (for DP832/DP831/DP821/
DP811; for the other models, this is a standard accessory)
INTERFACE-DP800
USB to GPIB Interface Converter USB-GPIB
DP800 Series Rack Mount Kit (Single Instrument) RM-1-DP800
DP800 Series Rack Mount Kit (Two Instruments) RM-2-DP800
DP800 Series Red Safety Plug SPR-DP800
DP800 Series Black Safety Plug SPB-DP800
DP800 Series Green Safety Plug SPG-DP800
11. RIGOL®
is the registered trademark of RIGOL Technologies, Inc. Product information in
this document subject to update without notice. For the latest information about RIGOL's
products, applications and services, please contact local RIGOL office or access RIGOL
official website: www.rigol.com
HEADQUARTER
RIGOL TECHNOLOGIES, INC.
No.156,Cai He Village,
Sha He Town,
Chang Ping District, Beijing,
102206 P.R.China
Tel:+86-10-80706688
Fax:+86-10-80705070
Electronic Measurement
Instrument service and support
email:EMD_support@rigol.com
EUROPE
RIGOL TECHNOLOGIES GmbH
Lindbergh str. 4
82178 Puchheim
Germany
Tel: 0049- 89/89418950
Email: info-europe@rigoltech.com
NORTH AMERICA
RIGOL TECHNOLOGIES,
USA INC.
10200 SW Allen Blvd, Suite C
Beaverton, OR 97005, USA
Toll free: 877-4-RIGOL-1
Office: (440) 232-4488
Fax: 877-474-4651
Email: info@rigol.com
JAPAN
RIGOL TECHNOLOGIES JAPAN G.K.
Tonematsu Bldg. 5F, 2-33-8 Nihonbashi-
Ningyocho, Chuo-ku,
Tokyo 103-0013
Japan
Tel: +81-3-6264-9251
Fax: +81-3-6264-9252
Email: info-japan@rigol.com
06/16
Distrubuted by:
NIHON DENKEI