This document discusses radio frequency (RF) signal loss and techniques to minimize it for non-line-of-sight wireless connections. It highlights that RF signals lose strength when encountering natural and manmade obstacles. Some key causes of signal loss include free space loss, fading, and equipment loss. Non-line-of-sight solutions should provide high system gain, mitigate fading and dispersion, and compensate for multipath signals. Technologies like space time coding, adaptive modulation, OFDM can help achieve reliable non-line-of-sight connections by combating various types of signal loss and fading. The document focuses on using OFDM modulation to mitigate effects of frequency-flat and frequency-selective fading.
Loss of strength, A periodic reduction in the received strength of a radio transmission.
This is about the phenomenon of loss of signal in telecommunications.Fading refers to the
time variation of the received signal power caused by changes in the transmission medium or path.
Loss of strength, A periodic reduction in the received strength of a radio transmission.
This is about the phenomenon of loss of signal in telecommunications.Fading refers to the
time variation of the received signal power caused by changes in the transmission medium or path.
Fundamental of Radio Frequency communications.pptginanjaradi2
Fundamentals of Radio Frequency (RF) communications encompass the principles and techniques used to transmit and receive information wirelessly using electromagnetic waves within the radio frequency spectrum. Here's a breakdown of the key components:
1. **Electromagnetic Spectrum**: RF communications utilize a portion of the electromagnetic spectrum. This spectrum ranges from low frequencies used for power transmission to high frequencies used in technologies like microwaves and beyond. RF typically occupies the frequency range from about 3 kHz to 300 GHz.
2. **Modulation**: Modulation is the process of impressing information onto a radio wave by varying one or more of its properties such as amplitude, frequency, or phase. Common modulation techniques include Amplitude Modulation (AM), Frequency Modulation (FM), and Phase Modulation (PM).
3. **Transmitters**: Transmitters generate radio frequency signals carrying the information to be transmitted. They typically consist of an oscillator to produce the carrier frequency, modulation circuitry to impress the information onto the carrier, and amplifiers to boost the signal for transmission.
4. **Receivers**: Receivers capture radio frequency signals, extract the desired information, and convert it into a usable form. Receivers include components such as antennas to capture the incoming signal, amplifiers to boost weak signals, demodulators to extract the information from the carrier, and filters to remove unwanted noise and interference.
5. **Antennas**: Antennas are crucial components for both transmitting and receiving RF signals. They convert electrical signals into electromagnetic waves for transmission and vice versa for reception. Antennas come in various designs optimized for different applications, such as dipole antennas, patch antennas, and parabolic antennas.
6. **Propagation**: RF signals propagate through the atmosphere, and their behavior is influenced by factors such as frequency, distance, terrain, and environmental conditions. Understanding propagation characteristics is essential for designing efficient communication systems.
7. **Propagation Models**: Propagation models describe how RF signals propagate in different environments. These models help engineers predict signal strength, coverage areas, and potential sources of interference. Common models include free-space path loss, multipath fading, and terrain-based models.
8. **Spectrum Management**: Since the radio frequency spectrum is a finite and shared resource, its allocation and usage are regulated by government agencies such as the Federal Communications Commission (FCC) in the United States. Spectrum management involves allocating frequency bands to different users, enforcing regulations to prevent interference, and promoting efficient spectrum utilization.
9. **Applications**: RF communications find applications in various fields, including broadcasting, telecommunications, wireless networking.
Fading Techniques in Wireless Communication and their Appropriate Solution A ...ijtsrd
In this paper, fading models are considered. Fading is deviation of the attenuation of signal affecting certain parameters and various components. In this paper, I represent the disadvantages of fading. Fading can cause poor performance in a communication system because it can result in a loss of signal power without reducing the power of the noise. This signal loss can be over all of the signal bandwidth. Furthermore this review paper also describes its appropriate solution OFDM that will reduce fading in some extent. Prof. Sukhjinder Singh | Dr. Hitanshu Kumar | Sarita Devi | Dr. Arashdeep Singh "Fading Techniques in Wireless Communication and their Appropriate Solution- A Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-7 , December 2022, URL: https://www.ijtsrd.com/papers/ijtsrd52381.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/52381/fading-techniques-in-wireless-communication-and-their-appropriate-solution-a-review/prof-sukhjinder-singh
1. RF SIGNAL LOSS AND ITS MINIMIZATION
SUNJEEV KUMAR GUPTA RANJIT KUMAR KARNA
Kathmandu Engineering College, Kalimati Kathmandu Engineering College, Kalimati
ABSTRACT
This paper highlights the main issues confronting
radio frequency (RF) propagation in non-line-of-sight For VHF, UHF and higher frequency. Attaining good
wireless connections. Wireless signals propagating through Line of Sight (LOS) between the sending and receiving
the air lose strength while encountering natural and antenna is essential.
manmade obstacles. It would be nice if RF signals would
propagate without any bounds, but that simply doesn't 3. THE NON-LINE-OF-SIGHT CHALLENGE
occur. The problem might be different kinds of losses that
are:- free space loss, fading loss, equipments loss etc. It is The nature of a Non-Line-of-Sight link is that
seen that there are different mitigation technologies for there are obstacles such as buildings, vehicles, trees and
non-line-of-sight solution. For this, some elements of non- hills between the transmitting and the receiving stations,
line-of-sight solution are:-High System Gain, Dispersion completely obscuring the line of sight. Even in such
Mitigation, Multi-path Compensation and Fading environments, multiple paths do exist between
Mitigation. This can be achieved by Space Time Coding, transmitter and receiver via a combination of reflection,
Adaptive Modulation, Dynamic Frequency Selection and diffraction and penetration. These “multi-paths” are of
Orthogonal Frequency Division Modulation (OFDM), different lengths and have different characteristics.
which can deliver the best chance of achieving a reliable, Hence, the signals arrive with varying amplitudes and
secure, high-availability wireless connection. The paper disperse over time, causing self-interference. To make
mainly focuses on the OFDM in frequency flat and things worse, as the environment changes due to
selective fading. movement of obstacles such as trees or vehicles, or even
to changes in air pressure or ambient temperature, the
1. INTRODUCTION nature of each path dynamically changes. This fading
effect causes the received signal quality to vary
Today there has been a high demand for reliable, unpredictably. Fading can reduce a signal’s strength by a
secured, high-speed digital wireless communications. factor of up to -40 dB for periods of seconds, minutes or
Besides the cellular phone, there are wireless modems, even days in some cases. The remainder of this paper
high definition television (HDTV), and digital radios. looks at the techniques and technologies available to
Performance of these devices in a wireless environment overcome this significant obstacle.
can be severely limited by random fluctuations in
amplitude of the received signal called fading. To solve 4. 1. FREE SPACE LOSS
these challenges, many innovative techniques have been
developed. In this paper, we focus on the combination of As signals spread out from a radiating source, the
two of the powerful techniques, Antenna Diversity and energy is spread out over a larger surface area. As this
OFDM. occurs, the strength of that signal gets weaker. Free
space loss (FSL), measured in dB, and specifies how
2. AN OVERVIEW OF THE LINE-OF-SIGHT much the signal has weakened over a given distance [1].
FSL = 36.6+20 logF+20log D
Where F: Frequency in MHz, D: Distance in Km and
FSL: Free Space Loss
Distance (miles) 2 4 6 10 20
2.4 GHz FSL 110 116 119 124 130
(dB)
5.8 GHz FSL 118 124 127 132 138
(dB)
Fig. The overview of line of sight (LOS).
2. 4. 2. ENVIRONMENT / ATMOSPHERIC LOSS The radius of the nth Fresnel Zone at its widest point can
be calculated by the following formula:
It is important to consider any unusual weather
conditions that are (un) usual to the site location for the
n.d 1d 2
radio link. These conditions can include excessive rn
amounts of rain or fog, extreme temperature ranges and (d1 d 2)
different adverse situations. They are discussed as:
Where d is the link distance in km., is wavelength in
4.2.1RAIN AND FOG meter and r is in meter and n is an integer
For example, suppose there is a 2.4 GHz link 5
Attenuation (weakening of the signal strength) due miles (8.35 km) in length. The resulting Fresnel Zone
to rain does not require serious consideration for would have a radius of 31.25 feet (9.52 meters).
frequencies up to the range of 6 or 8 GHz. When
frequencies are at 11 or 12 GHz or above, attenuation
due to rain becomes much more of a concern, especially
in areas where rainfall is of high density and long
duration. If this is the case, shorter paths may be
required. In most cases, the effects of fog are considered
much the same as rain. However, fog can adversely
affect the radio link when it is accompanied by
atmospheric conditions such as temperature inversion, or
very still air accompanied by stratification.
4.2.2 ATMOSPHERIC ABSORPTION
Fig. The path profile which may change over time due to
A relatively small effect on the link is from oxygen vegetation, building constructions, etc
and water vapor. It is usually significant only on longer
paths and particular frequencies. Attenuation in the 2 to 6. FADING
14 GHz frequency ranges, which is approximately 0.01
dB/mile, is not very significant.
Fading is the most important cause of distortion that
detracts the RF signal being transmitted. Fading occurs
5. FRESNEL ZONE on strong signals and weak signals. Increasing the
transmitter power does little to improve the distortion
The area that the signal spreads out into space is caused by fading. An analysis of the different causes of
called the Fresnel Zone. An obstacle in the Fresnel zone fading is presented this month along with some ideas on
diffracts or bends part of the radio signal away from the measures broadcasters and listeners can take to reduce
straight-line path. On a point-to-point radio link, this the effects of fading.
refraction reduces the amount of RF energy reaching the
receiving antenna. A consideration when planning or 6.1. TWO WAYS TO FADE
troubleshooting an RF link is the Fresnel Zone. The
Fresnel Zone occupies a series of concentric ellipsoid
shaped areas around the LOS path, as can be seen in the Fading occurs in two deferent ways: frequency-flat
figure. The Fresnel Zone is important to the integrity of fading and frequency-selective fading. Flat fading is seen
the RF link because it defines an area around the LOS when the received signal spectrum remains a close
that can introduce RF signal interference if blocked. replica of the transmitted signal spectrum except for a
Objects in the Fresnel Zone such as trees, hills and change in amplitude. This amplitude change of the signal
buildings can diffract or reflect the main signal away spectrum varies over space because of the interference of
from the receiver, changing the RF LOS. These same the combined electromagnetic waves. This interference
objects can absorb or scatter the main RF signal, causing can be constructive or destructive and, as a result, the
degradation or complete signal loss. fade (changes in the received signal magnitude) due to
flat fading can be very significant, 30 dB or more. The
signal undergoes flat fading if Bs<<Bc and Ts >> στ.
Where Ts, Bs are symbol period bandwidth of the
transmitted modulation. In addition, Bc, στ are delay
spread and coherence bandwidth of the channel.
Frequency-selective fading occurs when the delay
spread of the channel is more than about 10% of the
symbol period, thereby causing the wireless channel to
3. alter the received signal spectrum. In the time domain, connections. Elements of a Non-Line-of-Sight solution
the received symbols can no longer be identified should include:
individually. They interfere with each other since they High System Gain
are dispersed in time and overlap one another. This is Fading mitigation
known as Inter-Symbol Interference (ISI). In the Dispersion mitigation
frequency domain, the channel response can no longer These can be achieved using technologies such as:
be considered “flat.” Its amplitude has significant Space Time Coding
variation and its phase is not linear with frequency. The Orthogonal Frequency Division Modulation
signal undergoes frequency selective fading if Bs>>Bc Adaptive Modulation
and Ts << στ. Where Ts, Bs are symbol period
bandwidth of the transmitted modulation. In addition,
Bc, στ are delay spread and coherence bandwidth of the 6. 3.1. SPACE TIME CODING
channel.
Space Time Coding (STC) is a method of
transmitting multiple data beams on multiple
6.2. SYSTEM OPERATING MARGIN/FADE Transmitters to multiple receivers. Basically, if any one
MARGIN path is faded, there is a high probability that the other
paths are not, so the signal still gets through.
System Operating Margin (SOM) is the difference A simple analogy is if a single coin is tossed, there
(measured in dB) between the nominal signal level is a 0.5 chance of a head. If there are four coins, there is
received at one end of a radio link and the signal level a 15/16 chance of getting at least one head.
required by that radio to assure that a packet of data is For STC to be effective, the paths need to be de-
decoded without error. Ideally, the fade margin should correlated (e.g., the signals traveling on those paths need
be more than 20 dB. Less SOM can result into unstable to behave differently from each other). This can be done
link. using techniques such as spatial separation of the
antennas.
RX Signal = EIRP – FSL + RX Antenna Gain – Coax
Cable Loss 6. 3. 2. ADAPTIVE MODULATION (AMod)
Fade margin/SOM =RX Received signal – Receiver In this technique, the radio phase and amplitude
Sensitivity modulation are dynamically modified according to the
signal level received. Since the channel may vary in
intensity.
6.3. COMBATING FADING
Adaptive modulation allows the system to transmit the
maximum amount of data possible by rapidly optimizing
The most commonly used solution to multi-path itself to the channel conditions. The effect is to increase
fading is careful site selection to provide a single, the data-rate capability.
unobstructed line-of-sight path between the transmitter
and receiver either directly. Where this is not feasible, 6. 3. 3. ORTHOGONAL FREQUENCY DIVISION
flat fading can be compensated for by a sufficient fade MODULATION
margin at the cost of limiting range and coverage. Using Orthogonal Frequency Division Modulation
OFDM (Orthogonal Frequency Division Modulation) (OFDM) involves the transmission of data on multiple
and can mitigate narrow-band interference. To combat frequencies. By using multiple carriers, communication
frequency-selective fading, a wireless system should use is maintained should one or more carriers be affected by
a signal-processing technique to remove ISI. ISI occurs either narrow-band or multi-path interference. A key
where the channel is dispersive so that the received aspect of OFDM is that the individual carriers overlap to
waveform suffers delay spread, causing transmitted improve spectral efficiency. Normally, overlapping
symbols to overlap one another. Techniques to overcome signals would interfere with each other. However,
ISI are, in general, known as channel-equalization through special signal processing, the carriers in an
techniques. Equalization algorithms compensates for ISI OFDM waveform are spaced in such a manner that they
created by multipath within the time dispersive channels. effectively do not see each other i.e., they are orthogonal
In addition, space diversity by means of multiple to each other so that there is no cross-interference and
antennas can help solve the fading problem. With hence no signal loss.
adequate antenna separation, when the signal received by The key benefits of OFDM include higher spectral
one antenna fades, there is a good probability that the efficiency (throughput/MHz of channel bandwidth) and
signal strength at the other antenna is still sufficiently high resistance to multi-path interference and frequency-
large. selective fading.
A special blend of advanced techniques and OFDM has gained much attention recently. It is
technologies is required to overcome fading and other used in European Digital Audio Broadcasting (DAB),
interference problems in Non-Line-of-Sight wireless and in still developing IEEE 802.11 wireless LAN
standard (5 GHz band). The main idea behind OFDM is
4. to split the data stream to be transmitted into N parallel We will give a brief summary of one, and present
streams of reduced data rate and to transmit each of them theoretical and experimental results using these
on a separate sub carrier orthogonally. Therefore, traditional combining techniques with OFDM in a fading
spectral overlapping among subcarriers is allowed, since environment.
the orthogonality will ensure that the receiver can
separate the OFDM subcarriers, and a better spectral 7. BER DETERMINATION IN FADING
efficiency can be achieved than by using simple CHANNELS [2]
frequency division multiplexing. In an OFDM For binary PSK and a given received SNR, b, the
transmitter, blocks of k incoming bits are encoded into n probability of error is
channel bits. Before transmission, an n-point Inverse-
FFT operation is performed. When the signals at the I-
FFT output are transmitted sequentially, each of the n For a Rayleigh flat fading channel, the received SNR is
channel bits appears at a different (sub carrier)
frequency. The implementation aspects for OFDM is to
transmit serial to parallel encoded nth channel bits.
Where is the magnitude of the channel response.
Since is Rayleigh distributed, and more
Diversity is the powerful communication transceiver importantly, is chi-square distributed for
technique used to compensate for fading channel degree freedom. Therefore the pdf of the received SNR
impairments and usually implemented by using two or is,
more receiving antennas. As with an equalizer, diversity
improves the quality of wireless communication link
without increasing the transmitted power or bandwidth.
Antenna diversity is an effective way to handle Where is the average SNR. Integrating over the
multipath fading channels. Its goal is to generate density of b , we obtain
multiple independent versions of the same signal by
using multiple antennas, usually at the receiver. Thus,
even if some of the received versions are deeply faded, it
is probable that not all copies are faded. By properly Which can be evaluated as
combining or selecting the best diversity branches,
performance can be significantly improved.
The signals received from the diversity antennas
must be combined to form a decision variable. There are Producing,
three traditional combining methods – maximal ratio
combining (MRC), equal gain combining (EGC), and
selection combining (SC). When each branch has the
same average SNR, maximal ratio combining is the
Optimal combining technique [2]. In general, will depend on the number of
diversity branches and the combining methods used.
1 1 However, once is found, the same method can be
G1 M applied for any number of diversity branches and any
combining method. Likewise, if a different modulation
2 2 Cophase
Detector
And
. G2 method is used, then must be altered accordingly.
Sum
. For example, if binary DPSK is used instead, then
m m
Gm and the probability of error for binary DPSK in a flat
Antenna fading channel is:
Control Adaptive
Fig. Block diagram of maximal ration combiner.[3]
In the following sections, we will extend these
This type of diversity technique takes the signals
methods to antenna diversity for OFDM using MRC
from all of the m branches are weighted according to
combining techniques. We will also use simulation to
their individual SNR and then summed. But the
obtain performance results. The frequency spectrum at
individual signals must be co-phased before being
the output of the channel, Y(f)s related to the frequency
summed. Hence, this produces an output SNR equal to
spectrum at the input, X(f), by
the sum of the individual SNRs
The general technique for determining the
probability of error (P e) which will be used to generate
OFDM for MRC in frequency selective fading channels.
5. Where H(f) is the channel frequency response and 0.0001 BER. L = 4 produces a 8 dB gain over no
No is the noise, The ideal equalizer works by finding diversity at 0.01 BER, and a 21 dB gain at 0.0001 BER.
H(f) by dividing Y(f) by X(f) before noise is added in But adding additional diversity branches offers
the discrete channel model. The frequency selective incrementally smaller gains, For instance,
fading channel is modeled by a FIR filter whose length is
determined by the delay spread. .
8. MAXIMAL RATIO COMBINING [2]
The maximal ratio combining (MRC) is optimal
when the average signal-to-noise ratio (SNR) is the same
for all branches. In MRC, the received signals are co-
phased, weighted by their respective magnitudes, and
then summed. For example, if the transmitted sequence
x[n] is sent through L independent flat fading diversity
branches, the received sequence for the ith branch is
Where is the complex gain for the ith branch
of the channel. In the case of flat Rayleigh fading, is a Fig1 Bit Error vs Diversity Gain
Rayleigh random variable and θi is uniformly At 0.01 BER, there is a 5.5 dB gain from L = 1 to L
distributed. In the maximal ratio combiner, the received = 2, a 2.5 dB gain from L = 2 to L = 4, but only a 1 dB
gain from L = 4 to L = 8.
signal from the ith branch is multiplied by ,and
then the product terms from all L branches are summed.
The decision variable U for the nth bit is thus
Using MRC, γb is just the sum of the L channel
signal-to-noise ratios, γc, which are Rayleigh distributed
for a Rayleigh fading channel, i.e.
Then,
is
Fig.2 Diversity Gain vs BER
and probability of error is found by integrating
There is a closed form solution to the integral is:
DISCUSSION AND CONCLUSION
In this paper, we examined the performance of antenna
diversity for OFDM in both flat and frequency selective
--(x) fading channels. More specifically, we examined the
diversity combining techniques (MRC). For OFDM,
Where . diversity combining can be done on individual
Fig.1 shows a comparison between the simulation subcarriers (narrowband combining).
results for this system and the analytical results from
equation (x) for L = 2. As seen in the figure, the REFERENCES
response of the bit error showing the two curves are [1] www.smartbridges.com
virtually identical. Thus, we are justified in using the flat [2]W. Jakes. Microwave Mobile Communications.
fading expressions for OFDM even on frequency Wiley and Sons, 1974.
selective channels. [3] T.S. Rappaport. Wireless communication, 2nd
Fig. 2 shows the diversity gain (in terms of Eb/No) edition, PHI.
as a function of BER and the diversity order L. From the
figure, the diversity gain at high BER is fairly small but,
at lower BER, there is a much greater gain from
diversity. For example, L = 2 offers a 5.5 dB gain over L
= 1 (no diversity) at 0.01 BER, and a 14.8 dB gain at