This document contains a resume for Greg M. Abinales, who has over 28 years of experience in electrical and mechanical construction and maintenance. He lists his qualifications, which include experience working with high voltage systems up to 115kV, as well as low voltage systems. He has experience estimating, project management, and safety training. His objective is to improve his knowledge of high voltage electrical and mechanical systems to share with others interested in learning.

1. Name: Greg M. Abinales
Address: San Agustin Sta. Rita
Pampanga, Philippines
Cell #: 011-93-79-429-6385
E-mail: gmeguam1@yahoo.-com
OBJECTIVE:
I want to improved more my knowledge inhighvoltage electrical and mechanical so
that I can share to those personthat have interestto learn about electrical and mechanical.
KEY OF QUALIFICATIONS
Over 28 + years ofelectrical experience inconstructionand maintenance industry, have
knowledge electrical installationroughin to finish,repair and install motor, trouble shooting. Fire
Sprinklersystem,control, circuits and sensors,wiring and systemspecification.HVAC control system,
control, circuits and sensors,wiringsystem and specification. Have knowledge forelectrical,fire alarm
systemand mechanical estimating.Formerlyelectrical and mechanical contractor ( since 1989 to 2008
and have existingcontractor license.) TrainedAndpractice safetyfirst with proper usedof PPE, LOTO,
CPR, First Aid,Fall protection,Confinedspace,Bucket, Scissor Lifts,and common sense.
Demonstratedrecord driving job site operationsto completionand time/budget.Maintainsgood
working relationshipswithCity,County, State, Federal and UtilityInspectors.Keepsa general
understandingall BuildingCodes,withan emphasis Electrical NEC and British Code.Strong Leadership
abilitiesor as a team memberwithexcellentwritten,oral,communication and computer skillsand
30hrs.OSHA training and have 40hrs. training for UPS. CPR Trainingand ARC Flash Training. With
knowledge of from 120V240V, 277V480 7kVA, 11kVA up to 35kVA and for now 4160 highvoltage
power generation systems,amperage,frequency,and power factors, skill in locatingand repairing
defectsinelectrical systems,installingload break elbows,highvoltage terminating,splicing,and
service grounding, knowledge ofsafety principlesandusing personal protective equipment. Have
experienced in power generation electrical disconnect, reconnect, GEC and EGC procedure
repair, service maintenance, trouble shooting. I know how to used 1653B Fluke tester to do EDSI,
Inspection Data Form Generator R&I. Master Electrician more than ten years with exterior
overhead and underground power line maintenance, including analysis of High Voltage controls

2. circuits for power generating and distribution systems up to 115 KV. Experience with high voltage
safety equipment such as: high voltage isolation equipment; high voltage discharge hooks;
grounding clusters; high voltage buss clamps; high voltage mats; high voltage safety shields,
gloves and insulation blankets. Experience with high voltage test equipment such as: Hi Pot,
thumper, fault locating Radar, high voltage volt meter Range Ovac to 50 KV, non contact high
voltage detector, high voltage cable locator, shot gun (hot stick), infrared/thermal camera, high
voltage meggers. Experience with high voltage safety. Also I have a knowledge for general
maintenance plumbing, carpentry, painting and others regarding repair and maintenance.
EDUCATION:
High School graduate June 1963
Two years Electronics
Four years Electrical Engineering
Three years Mechanical Engineering
ACCOMPLISMENTS:
Finish electrical job in AFB Guam Contractor
Contract and finish some Electrical and Mechanical job at JA JONES Contractor in Guam
Contract and finish some Electrical and Mechanical job at AIC Contractor in Guam
EMPLOYMENT HESTORY:
High Voltage Electrician and Leadman at DynCorp. Intl. Afghanistan December 2010 to
December 2013 Power Plant, Electrician in Pasab at present.
Electrician 111 KRS/RTS Meck Power Plant Meck Island December 2008 to December 2009
Field Supervisor JBL Company May 2005 to December 2008
Owner / Operator GMEGUAM Contractor April 1989 to May 2005
Supervisor Guam Dai Iche Hotel October 1981 to April 1989
Manila Helton Supervisor November 1978 to July 1981
Person knows me:
CharlesHudson # 817-567-5230 Dwyer PowerSupervisor

3. Victor Dives # 817-567-5227 Dwyer O&M 1
Mark Owens # 817-567- 4128 Deputy Regional Director- RC South
PhillipWade # 817-567-5230 Shendand PowerGenSupervisor.
Certifications (Current and Active)
Sole Proprietor Contractor’s License GuamUSA License#6421
Class B,C13,C13A,C19,C20,C40,C51
CertifiedMasterElectricianGuam USA License # 95
PROFESSIONAL EXPERIENCE:
December2010 to PresentHigh Voltage Electrician and Lead man at Camp Dwyer Power Plant
Harvest Falcon Performedcorrective or preventive maintenance andadjustmentto electrical
systemfrom 24Vdc to 4160Vac.including high voltage switchgears,power panels,motor supplies,
transformers. Repair highvoltage electrical,control MDP, SDC, PDC, and minor repair of electrical,
disconnectand reconnect electrical fromgenerator and trouble shooting.Rewire electrical line
and conduit if neededandother job for lowvoltage electrical and highvoltage and electrical pm.
Performsa broad range of electrical Maintenance,repair,and construction support,also
incorporating inspectionand testingof distribution systems,and circuit faultfinding.
IdentifyLife,Health,and Safety (LHS) issuesand repair circuit faultson electrical systems.Install,
maintain, repair,or replace electrical equipmentandsystemsin strict accordance with applicable
codesand standards. Identifyproper materialsfor use on specificinstallationsandcomplete
maintenance and repair records. Followall safetyrulesand proceduresincludingwearingrequired
personal safety equipment.Oversee electrical workofassignedemployeestoensure compliance
with standards. Ensure electrical toolsand equipmentare properlymaintainedin a safe operating
conditionand work areas are clean and hazard free Performother dutiesas assigned.
December2008 to December2009 Electrician 111 Meck PowerPlant Performed
corrective or preventive maintenance andadjustmentto electrical systemfrom 24Vdc to 4160Vac.
includinghighvoltage switchgears,power panels,motor supplies,transformers.Motor control center
and general lightingand power systems and Fire alarm system.Mechanical repair overhaul high
voltage engine services,change oil,oil filter,fuel filter,airfiltercoolant filterand others needed.
June 2005 to December2008 FieldSupervisorJBL Company Performedestimating
for electrical mechanical,job scheduling,coordinatingactivitieswithAll Electrical,Fire Alarm
system,Fire Sprinkler Control, Ducting control ,Refrigerationand Air conditionsystemcontrol, and
other electrical and Mechanical trades and general contractors, general projectmanagement.
April 1989 to May 2005 Owner/Operator GMEGUAMContractor Performedelectrical
mechanical estimator, job scheduling,contractingelectrical/mechanical,journeyman electrician,
installationof Electrical,Fire Alarm system control, Fire Sprinklercontrol, Ducting control,

4. Refrigerationand Air conditioncontrol system,and other Electrical and Mechanical from rough in to
finishing,coordinationschedulinglabor,general projectmanagement. Recenttypes ofprojects
includes,industrial,commercial,residential,tenant,service workimprovement.
October 1981 to April 1989 GuamDai Ichi Hotel SupervisorPerformedtrouble
Shootingof electrical,plumbing,fire alarm system,sprinkler system, walk infreezer, walk in
refrigeratorcooling tower, chiller,andair handlingsystem.
November1978 to April 1981 SupervisorPerformedoftrouble shooting repair of
all electrical control lighting,coolingtower, chiller,air handlingsystem,walk in freezer,walk
in refrigeratorplumbing,fire alarm system,sprinkler.
B. GENERAL BUILDING
A General Building contactor is a contractor whose principal contracting business is in
connection with any structure built, being built or to be built for the support, shelter and

5. enclosure of persons, animals, chattels or movable property of any kind requiring in its
construction the use of unrelated building trades or crafts or to do or superintend the
whole or any part thereof.
C-13 Electrical Contractor: A specialty contractor whose contracting business is the execution
of contracts requiring the ability to place, install, erect or connect any electrical wires, fixtures,
appliances, apparatus, raceways or conduits and lines which transmit, transform or utilize
electrical energy.
C-13A Pole & Line Contractor: A specialty contractor whose contracting business is the
execution of contracts requiring the ability to dress, ground, and anchor and erects poles
designed to carry electrical wires and to connect and string electrical wires and fixtures and
apparatus to and between such poles. C-13 (Electrical Contractor) is a pre-requisite to obtaining
this classification.
C-19 Fire & Burglar Alarm Contractor: A specialty contractor whose contracting business
is the execution of contracts requiring the ability to intelligently install, maintain and require fire
and burglar alarm systems.
C-20 Fire ProtectionContractor: A specialty contractor whose contracting business is the
execution of contracts requiring the ability to intelligently layout, fabricate and install approved
types of fire prevention and protection systems including all mechanical apparatus, devices,
piping and equipment appurtenances thereto except electrical devices, apparatus and wiring
which shall be installed by specialty contractors in the classifications C-13 or C-15. The licensee
shall have the ability to comply with applicable provisions of the NBFU Standards to meet all
requirements of the local authorities having jurisdiction.
C-40 RefrigerationContractor: A specialty contractor whose contracting business is the
execution of contracts requiring the ability to intelligently construct, erect and install devices,
machinery and units including Tempe ration insulation units, ducts, blowers, registers, humidity
and thermostatic controls for the control of air temperature below fifty degrees Fahrenheit in
refrigerators, refrigerator rooms and insulated refrigerator spaces.
C-51 Warm Air Heating, Ventilating & Air Conditioning Contractor: A specialty
contractor whose contracting business is the execution of contracts requiring the ability to
intelligently fabricate and install warm air heating and cooling systems, complete air
conditioning systems, except those air conditioning systems requiring refrigeration as an integral
part of the system.