Michael Walsh has over 5 years of experience in 3D scanning, modeling, and data analysis. He has worked as an Application Engineer at Creaform where he conducted trainings and assisted clients in industries like aerospace and oil & gas. Previously, he worked as a Pipeline Engineer at Acuren Inspection where he reviewed engineering reports, trained personnel, and used 3D scanning technologies. He also has experience working as a Research Analyst and Lab Technician where he conducted experiments and water quality tests. Walsh holds a Bachelor's degree in Environmental Engineering and is certified as an engineer in the state of Colorado.

1. (References Available Upon Request)
MICHAEL WALSH
2855 Pinecreek Dr. Apt B-407, Costa Mesa, CA 92626
Phone : (949) 291 – 7151  Email : emuilglare@gmail.com  Website : mjwalsh.wix.com/michaelwalsh
PREVIOUS WORK EXPERIENCE:
Creaform - Costa Mesa, California – Application Engineer 10/2015 - Present
 Performed data collection, analysis, reverse
engineering, 3D modeling, and 3D design using all of
Creaform’s hardware and software products.
 Managed and conducted various trainings nationwide
focusing on technical development in the following
fields: 3D Measurement Technologies, 3D Modeling
Software, Reverse Engineering, and Management.
 Performed demos and benchmarks for high end
clients in the Aerospace, Automotive, and Oil and
Gas industries.
 Assisted Sales in the marketing and application of
technologies to meet company requirements.
 Performed Alpha and Beta testing on new software.
 Enhanced the HandySCAN 700’s capabilities and
diversified the Pipecheck program to encompass a
greater variety of industry inspection applications.
Acuren Inspection - Denver, Colorado – Pipeline EIT 11/2013-10/2015
 Performed QA/QC engineering reviews on various
natural gas NDT (non-destructive testing) reports.
 Streamlined 3 reporting processes to make them more
consistent, accurate and compliant with client’s needs.
 Trained personnel in the report review process.
 Used Creaform’s HandySCAN laser technologies to
collect corrosion data and analyze it using Pipecheck.
 Used Z&F and Faro lasers with PolyWorks to collect
and model long range laser data for analysis of
holding tanks based on API 653 standards.
 Designed and formatted Excel sheets (including
macros) to organize, display, and lock company data.
Colorado State University- Fort Collins, Colorado – Research Analyst 07/2013-11/2013
 Used a lysing technology called OpenCEL©
in an
attempt to lyse TWAS cells for use as a carbon
source to aid in the reduction of effluent phosphorous
and nitrogen levels at the wastewater facility.
 Ran and maintained my own lab and experiments.
 Performed a variety of HACH testing around the
wastewater plant to determine the cause of system
failure.
 Performed fermentation and polymer experiments
combined with OpenCEL©
cell lysing technologies.
Aqua Medic - Loveland, Colorado – Lab Technician 03/2013-06/2013
 Ran and maintained my own lab.  Performed various tests to determine water quality of
salt water fish tanks.
Tutor Doctor - Fort Collins, Colorado - Tutor 01/2013-05/2013
 Tutored high school Geometry and Algebra 2.  Tutored Math 117, 118, and 125 at CSU.
SKILLS:
Software: SOLIDWORKS, PolyWorks, AutoCAD, Geomagic Design X, Cyclone, Pipecheck, VXmodel, VXinspect, GIS, SCENE,
LFM, HEC-HMS, Microsoft Excel, and Microsoft Word.
Hardware: Creaform 3D Measurement Technologies, FARO 3D Measurement Technologies, Surphaser 3D Laser Scanners, Leica
Long Range Scanners, Z&F Long Range Scanners, White Light Scanners, Blue Light Scanners, Laser Scanners, Probes,
Photogrammetry Devices, Laser Trackers, CMM’s, and Optical Technologies.
Testing and Inspection Experience: Advanced knowledge of Non Destructive Testing methods including: MT, UT, PT, RT, ET,
MFL, Phased Array, and Laser Profilometry. Standard HACH procedures using both colorimetric and probe methods.
EDUCATION:
Bachelor of Science in Environmental Engineering May 2013
Colorado State University, Fort Collins, Colorado
CERTIFICATIONS:
Fundamentals of Engineering Exam: State of Colorado Passed October 27, 2012