Proximity detection workshop opening address rob regan
•
1 like•363 views
The document summarizes a workshop on proximity detection and collision avoidance systems for mines. The workshop included case studies of incidents, discussions of electronic systems and functional safety, the human side of engineering, supplier presentations, and feedback from mine operators. It also provided statistics on equipment used at New South Wales surface coal mines, including over 1000 large trucks, to highlight the scale of potential collision issues the workshop aimed to address.
Report
Share
Report
Share
Download to read offline
Recommended
Uncertainty quantification in geology
This talk was given for Saudi Company Maaden. Different idea why uncertainty quantification in geology, mine business, reservoir description is important.
Graham Brown (Sonardyne) - ETI CCS MMV Project Overview - UKCCSRC Cranfield B...
Graham Brown (Sonardyne) - ETI CCS MMV Project Overview - UKCCSRC Cranfield B...UK Carbon Capture and Storage Research Centre
Graham Brown (Sonardyne) - ETI CCS MMV Project Overview - UKCCSRC Cranfield Biannual 21-22 April 2015Electricity In NSW Forum
This document discusses challenges and opportunities in electricity distribution models in NSW. It summarizes that the carbon tax, mandatory feed-in tariffs, and other policies have cost customers over $2655 per customer over 5 years. It outlines Ergon Energy's strategic objectives to provide customer choice and control while keeping price increases below inflation. The document also notes excess generation capacity could be leveraged given falling demand, and that distribution networks are not being effectively utilized due to these changes. It proposes possible hybrid future models and reforming distribution to an open access platform that enables customer choice and drives energy productivity.
Russel Smith and Daniel Carpenter: Managing Fatigue Failures of Longwall Hydr...
Russel Smith and Daniel Carpenter: Managing Fatigue Failures of Longwall Hydr...NSW Environment and Planning
This document discusses managing fatigue failures of longwall hydraulic equipment. It begins by noting that fatigue failures can suddenly occur in machinery that has been running flawlessly for years. The document then provides information on identifying and understanding fatigue failures, including their causes and characteristics. Key points are made about designing for fatigue, including understanding fatigue life distributions and inputs needed for reliable fatigue design like cycle counts and dynamic responses. The document concludes by discussing options for remedying fatigue problems, such as trend analysis, repair, replacement, minimizing worst contributions, using different materials, details, standards, and acknowledging past issues.Paul Stride - Electrical earth safety
Electrical workers have reported unexpected electric shocks or "tingles" even when extensive testing cannot find a source. This document discusses how non-linear loads like variable speed drives generate harmonics and electromagnetic interference that can induce voltages on cable shields or earth conductors even when the source equipment shows no faults. The document examines cable characteristics like resistance and impedance changing with frequency, allowing currents to take unexpected paths. This explains reported shocks despite unable to locate a direct source.
The case for improving our approach to collision avoidance Peter Standish
The case for improving our approach to collision avoidance Peter StandishNSW Environment and Planning
The document summarizes a presentation on improving collision avoidance approaches in the mining industry. It discusses key findings from incident data, actions taken by mining companies, understanding vehicle interaction exposure through different scenarios and speed ranges, managing exposure through various control levels, selecting appropriate controls, and conclusions around the need for continued coordinated efforts to refine standards and technology.Steve Mitchell: Wireless Charge Electric Mine Vehicle
Dr. Steve Mitchell presented on investigating the viability of wireless charging technology for mining applications. He discussed the motivation to move away from diesel vehicles due to health hazards and high ventilation costs. Current electric vehicle technologies have limitations like limited range, cable damage, and battery change-out overhead. Wireless charging could enable electric vehicles to charge while in operation without cables or battery swaps. The technology uses magnetic resonant coupling between transmitting and receiving coils, with efficiencies over 80% demonstrated. While not yet suitable for explosive atmospheres, it shows potential for metalliferous mining like block caving where automated vehicles could be wirelessly charged.
Electrical Commissioning and Arc-Flash Safety presentation
Electrical Commissioning and Arc Flash Safety training presentation given November 21, 2013. Mike Luffred presented this information as a technical seminar for the National Capital Chapter region (PA/NJ/DE/VA/MD/DC) of the Building Commissioning Association. The presentation was given at the Eaton Experience Center in Warrendale, PA to help commissioning engineers understand the importance of arc flash safety in the industry.
Recommended
Uncertainty quantification in geology
This talk was given for Saudi Company Maaden. Different idea why uncertainty quantification in geology, mine business, reservoir description is important.
Graham Brown (Sonardyne) - ETI CCS MMV Project Overview - UKCCSRC Cranfield B...
Graham Brown (Sonardyne) - ETI CCS MMV Project Overview - UKCCSRC Cranfield B...UK Carbon Capture and Storage Research Centre
Graham Brown (Sonardyne) - ETI CCS MMV Project Overview - UKCCSRC Cranfield Biannual 21-22 April 2015Electricity In NSW Forum
This document discusses challenges and opportunities in electricity distribution models in NSW. It summarizes that the carbon tax, mandatory feed-in tariffs, and other policies have cost customers over $2655 per customer over 5 years. It outlines Ergon Energy's strategic objectives to provide customer choice and control while keeping price increases below inflation. The document also notes excess generation capacity could be leveraged given falling demand, and that distribution networks are not being effectively utilized due to these changes. It proposes possible hybrid future models and reforming distribution to an open access platform that enables customer choice and drives energy productivity.
Russel Smith and Daniel Carpenter: Managing Fatigue Failures of Longwall Hydr...
Russel Smith and Daniel Carpenter: Managing Fatigue Failures of Longwall Hydr...NSW Environment and Planning
This document discusses managing fatigue failures of longwall hydraulic equipment. It begins by noting that fatigue failures can suddenly occur in machinery that has been running flawlessly for years. The document then provides information on identifying and understanding fatigue failures, including their causes and characteristics. Key points are made about designing for fatigue, including understanding fatigue life distributions and inputs needed for reliable fatigue design like cycle counts and dynamic responses. The document concludes by discussing options for remedying fatigue problems, such as trend analysis, repair, replacement, minimizing worst contributions, using different materials, details, standards, and acknowledging past issues.Paul Stride - Electrical earth safety
Electrical workers have reported unexpected electric shocks or "tingles" even when extensive testing cannot find a source. This document discusses how non-linear loads like variable speed drives generate harmonics and electromagnetic interference that can induce voltages on cable shields or earth conductors even when the source equipment shows no faults. The document examines cable characteristics like resistance and impedance changing with frequency, allowing currents to take unexpected paths. This explains reported shocks despite unable to locate a direct source.
The case for improving our approach to collision avoidance Peter Standish
The case for improving our approach to collision avoidance Peter StandishNSW Environment and Planning
The document summarizes a presentation on improving collision avoidance approaches in the mining industry. It discusses key findings from incident data, actions taken by mining companies, understanding vehicle interaction exposure through different scenarios and speed ranges, managing exposure through various control levels, selecting appropriate controls, and conclusions around the need for continued coordinated efforts to refine standards and technology.Steve Mitchell: Wireless Charge Electric Mine Vehicle
Dr. Steve Mitchell presented on investigating the viability of wireless charging technology for mining applications. He discussed the motivation to move away from diesel vehicles due to health hazards and high ventilation costs. Current electric vehicle technologies have limitations like limited range, cable damage, and battery change-out overhead. Wireless charging could enable electric vehicles to charge while in operation without cables or battery swaps. The technology uses magnetic resonant coupling between transmitting and receiving coils, with efficiencies over 80% demonstrated. While not yet suitable for explosive atmospheres, it shows potential for metalliferous mining like block caving where automated vehicles could be wirelessly charged.
Electrical Commissioning and Arc-Flash Safety presentation
Electrical Commissioning and Arc Flash Safety training presentation given November 21, 2013. Mike Luffred presented this information as a technical seminar for the National Capital Chapter region (PA/NJ/DE/VA/MD/DC) of the Building Commissioning Association. The presentation was given at the Eaton Experience Center in Warrendale, PA to help commissioning engineers understand the importance of arc flash safety in the industry.
Safety presentation isolation and tagging
This document discusses isolation and tagging procedures for safety. It states that equipment must be isolated to prevent accidental startup, allow maintenance, or take equipment out of service. Isolation points can include switches, valves, or other means to ensure energy sources cannot be turned on. Tags are placed on isolation points to warn others not to change the isolation state. The document describes the different types of tags used, including out of service, personal danger, commissioning/testing, and information tags. It emphasizes that equipment must be properly isolated and tagged before work, switches must be isolated and tagged by an authorized person, and workers must use personal danger tags and remove their own tag after completing work.
Human factors additional paper Ronny Lardner
This document discusses human factors in major hazard safety and outlines the top ten human factor issues according to a UK regulator. It begins with the author's biography and defines human factors. It then lists and briefly explains the top ten human factor topics, such as managing human failures, procedures, training and competence, and fatigue. It describes how organizations can use the top ten list to assess their capabilities and improve performance. An example is given of how addressing human factors led to a reduction in errors. The document concludes by providing references for further reading on applying human factors in industries like oil and gas.
Intelligent industrial wireless technology cliff rogers
PAMS Proximiti is a proximity detection and collision awareness system developed by iVolve that integrates Preco radar sensors and Safe Mine GPS technology. It provides short and long-range alerting of potential collisions between vehicles and equipment in mining environments. The system installs radar and GPS devices on vehicles and equipment, uses iVolve's Nexis wireless network to transmit real-time alerts and event data, and allows remote monitoring through a centralized interface. It is currently undergoing trials at two Queensland coal mines.
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date...
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date...NSW Environment and Planning
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date and what’s next? by Glen PhillipsPerspective on New Zealand Smart Meter rollout
1) New Zealand has rolled out smart meters across the country, called advanced metering infrastructure (AMI), which provides more accurate and timely electricity usage data.
2) AMI has enabled new time-of-use pricing plans for customers, improved two-way communication networks, and opportunities to mine useful information from usage data.
3) The rollout of AMI is part of wider electricity market reforms in New Zealand including improved customer switching, integration of distributed generation, and regulated guidelines for metering providers.
Bebelusii nu cauta scurtaturi si nu tin cont de gura lumii
Am realizat o prezentare cu 10 lectii din 16 pe care le-am invatat de la bebelusul meu. Restul lectiilor le gasesti pe http://fanautodidact.ro
Exploration in the House 2015: The Importance of the Junior Sector for minera...
Exploration in the House 2015: The Importance of the Junior Sector for minera...NSW Environment and Planning
Exploration in the House 2015: The Importance of the Junior Sector for mineral discovery in NSW by Richard SchoddeExploration in the House 2015: Geology Survey of NSW Overview and highlights ...
Exploration in the House 2015: Geology Survey of NSW Overview and highlights ...NSW Environment and Planning
Exploration in the House 2015: Geology Survey of NSW Overview and highlights from 2014 by Dr John GreenfieldThe Centre
Palava is a city located near Mumbai that is poised to become a major business hub due to its location at the center of the economic triangle formed by Navi Mumbai, Thane, and Kalyan, as well as its proximity to Mumbai's airport, port, and rail connections.
Collision awareness systems another defence
This document discusses approaches to reducing vehicle interaction hazards at mining sites. It advocates for a holistic approach that embeds a safety culture utilizing all available tools, including technology. Some key points discussed are:
- Focusing first on eliminating circumstances where vehicle interactions can occur through strategies like traffic flow design.
- Collision awareness technologies can help operators make decisions but do not fully avoid collisions on their own.
- Technologies need to be carefully selected and implemented with change management to support their effective use.
- Data on common collision scenarios informed initial targeted uses of collision awareness systems in controlled areas.
- Implementation has faced some challenges but generally been successful in establishing safer practices with workforce engagement.
Quest learning institute outbound activities
The document describes 14 outdoor team building activities offered by Quest Learning Institute. The activities are designed to develop skills like leadership, coordination, communication, teamwork, time management, trust, planning and problem solving. Some of the activities described include Mission Impossible, where teams work together to complete tasks while suspended from a harness, Sheep & Shepherd where one member guides blindfolded teammates as a shepherd would guide sheep, and Spider Web where teams must pass through a web without touching the strands.
Presentation1
This document discusses boxing, including the different weight classes ranging from light flyweight to heavyweight, and provides details about the career of boxer Naseem Hameed. It lists his achievements of 36 wins and 31 knockouts with 1 loss, and that he was a WBO champion. Pictures and video links are also included.
Dr David Sweeting - Update on arcing hazards
Dr. David Sweeting is working on an arc hazards guide with three parts. Part 1 deals with legal issues, part 2 is for workers, explaining what to do, and part 3 is for experts on arc hazard exposure. Safe Work Australia created model work health and safety regulations in 2011 that were legally binding in some states, except for electrical supply authorities. The regulations require identifying electrical hazards like electrocution, electric shock, and arcing hazards. They also require managing identified risks so far as is reasonably practical using a hierarchy of control measures, from elimination to substitution to engineering to administrative to personal protective equipment. "Operating work" involving energizing, de-energizing, connecting, and earthing equipment is permitted energized
Barry Cutting - Booster fans Angus Place Colliery
The document summarizes Angus Place Colliery's installation of booster fans to temporarily improve ventilation in the Angus Place East area until a new ventilation shaft was completed. Five potential locations for the booster fans were modeled, and it was decided to install three axial fans in an intake airway. A risk assessment was conducted and monitoring systems were put in place. Commissioning tests showed the fans were performing as expected to meet ventilation goals until the new shaft was finished.
Mark Parcell - History of mining legislation nsw
The document lists several major mining incidents in Australia between 1887 and 1996, including the location, type of incident (such as explosion or fire), and number of deaths. It discusses how mining incidents have led to changes in legislation over time to improve safety. Major incidents such as those at Mt Kembla and Appin collieries resulted in loss of life and revisions to safety standards and regulations in the mining industry.
Tony Linnane NSW Trade & Investment Mine Safety - new WHS laws for mining
Tony Linnane NSW Trade & Investment Mine Safety - new WHS laws for miningNSW Environment and Planning
The document summarizes new mining safety laws in New South Wales that will harmonize regulations and introduce a comprehensive safety management system. It describes the consultation process, key elements of the new laws such as principal hazard management plans and control plans, requirements for registering plants and notifying of high-risk activities, and transitional arrangements. The presentation was part of an information seminar about the new laws.12 Small mines report card 2020
The document outlines the compliance priorities and planned assessments for small mines from October to December 2020. It discusses setting compliance priorities every 6 months to increase transparency, community confidence, and compliance levels. The priorities include key statutory functions, roads and vehicle areas, structural integrity, electrical safety, and underground strata failure. It also notes 126 incidents from September 2019 to September 2020 and plans for 355 assessments of 149 mines to check statutory functions, roads, air quality, COVID-19 compliance, and other areas of concern.
11 occupational hygiene monitoring of dust
The document discusses occupational hygiene monitoring of dust in small mines and quarries. It outlines the types of dust monitored, including inhalable and respirable dust as well as crystalline silica dust. It describes how monitoring is conducted through personal and static sampling using filters and pumps to collect dust samples. Samples are then analyzed in a lab to determine dust composition and concentration, which are compared to workplace exposure standards. A free dust sampling program has been offered to small mines and quarries to assess high exposure activities and areas.
More Related Content
Viewers also liked
Safety presentation isolation and tagging
This document discusses isolation and tagging procedures for safety. It states that equipment must be isolated to prevent accidental startup, allow maintenance, or take equipment out of service. Isolation points can include switches, valves, or other means to ensure energy sources cannot be turned on. Tags are placed on isolation points to warn others not to change the isolation state. The document describes the different types of tags used, including out of service, personal danger, commissioning/testing, and information tags. It emphasizes that equipment must be properly isolated and tagged before work, switches must be isolated and tagged by an authorized person, and workers must use personal danger tags and remove their own tag after completing work.
Human factors additional paper Ronny Lardner
This document discusses human factors in major hazard safety and outlines the top ten human factor issues according to a UK regulator. It begins with the author's biography and defines human factors. It then lists and briefly explains the top ten human factor topics, such as managing human failures, procedures, training and competence, and fatigue. It describes how organizations can use the top ten list to assess their capabilities and improve performance. An example is given of how addressing human factors led to a reduction in errors. The document concludes by providing references for further reading on applying human factors in industries like oil and gas.
Intelligent industrial wireless technology cliff rogers
PAMS Proximiti is a proximity detection and collision awareness system developed by iVolve that integrates Preco radar sensors and Safe Mine GPS technology. It provides short and long-range alerting of potential collisions between vehicles and equipment in mining environments. The system installs radar and GPS devices on vehicles and equipment, uses iVolve's Nexis wireless network to transmit real-time alerts and event data, and allows remote monitoring through a centralized interface. It is currently undergoing trials at two Queensland coal mines.
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date...
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date...NSW Environment and Planning
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date and what’s next? by Glen PhillipsPerspective on New Zealand Smart Meter rollout
1) New Zealand has rolled out smart meters across the country, called advanced metering infrastructure (AMI), which provides more accurate and timely electricity usage data.
2) AMI has enabled new time-of-use pricing plans for customers, improved two-way communication networks, and opportunities to mine useful information from usage data.
3) The rollout of AMI is part of wider electricity market reforms in New Zealand including improved customer switching, integration of distributed generation, and regulated guidelines for metering providers.
Bebelusii nu cauta scurtaturi si nu tin cont de gura lumii
Am realizat o prezentare cu 10 lectii din 16 pe care le-am invatat de la bebelusul meu. Restul lectiilor le gasesti pe http://fanautodidact.ro
Exploration in the House 2015: The Importance of the Junior Sector for minera...
Exploration in the House 2015: The Importance of the Junior Sector for minera...NSW Environment and Planning
Exploration in the House 2015: The Importance of the Junior Sector for mineral discovery in NSW by Richard SchoddeExploration in the House 2015: Geology Survey of NSW Overview and highlights ...
Exploration in the House 2015: Geology Survey of NSW Overview and highlights ...NSW Environment and Planning
Exploration in the House 2015: Geology Survey of NSW Overview and highlights from 2014 by Dr John GreenfieldThe Centre
Palava is a city located near Mumbai that is poised to become a major business hub due to its location at the center of the economic triangle formed by Navi Mumbai, Thane, and Kalyan, as well as its proximity to Mumbai's airport, port, and rail connections.
Collision awareness systems another defence
This document discusses approaches to reducing vehicle interaction hazards at mining sites. It advocates for a holistic approach that embeds a safety culture utilizing all available tools, including technology. Some key points discussed are:
- Focusing first on eliminating circumstances where vehicle interactions can occur through strategies like traffic flow design.
- Collision awareness technologies can help operators make decisions but do not fully avoid collisions on their own.
- Technologies need to be carefully selected and implemented with change management to support their effective use.
- Data on common collision scenarios informed initial targeted uses of collision awareness systems in controlled areas.
- Implementation has faced some challenges but generally been successful in establishing safer practices with workforce engagement.
Quest learning institute outbound activities
The document describes 14 outdoor team building activities offered by Quest Learning Institute. The activities are designed to develop skills like leadership, coordination, communication, teamwork, time management, trust, planning and problem solving. Some of the activities described include Mission Impossible, where teams work together to complete tasks while suspended from a harness, Sheep & Shepherd where one member guides blindfolded teammates as a shepherd would guide sheep, and Spider Web where teams must pass through a web without touching the strands.
Presentation1
This document discusses boxing, including the different weight classes ranging from light flyweight to heavyweight, and provides details about the career of boxer Naseem Hameed. It lists his achievements of 36 wins and 31 knockouts with 1 loss, and that he was a WBO champion. Pictures and video links are also included.
Dr David Sweeting - Update on arcing hazards
Dr. David Sweeting is working on an arc hazards guide with three parts. Part 1 deals with legal issues, part 2 is for workers, explaining what to do, and part 3 is for experts on arc hazard exposure. Safe Work Australia created model work health and safety regulations in 2011 that were legally binding in some states, except for electrical supply authorities. The regulations require identifying electrical hazards like electrocution, electric shock, and arcing hazards. They also require managing identified risks so far as is reasonably practical using a hierarchy of control measures, from elimination to substitution to engineering to administrative to personal protective equipment. "Operating work" involving energizing, de-energizing, connecting, and earthing equipment is permitted energized
Barry Cutting - Booster fans Angus Place Colliery
The document summarizes Angus Place Colliery's installation of booster fans to temporarily improve ventilation in the Angus Place East area until a new ventilation shaft was completed. Five potential locations for the booster fans were modeled, and it was decided to install three axial fans in an intake airway. A risk assessment was conducted and monitoring systems were put in place. Commissioning tests showed the fans were performing as expected to meet ventilation goals until the new shaft was finished.
Mark Parcell - History of mining legislation nsw
The document lists several major mining incidents in Australia between 1887 and 1996, including the location, type of incident (such as explosion or fire), and number of deaths. It discusses how mining incidents have led to changes in legislation over time to improve safety. Major incidents such as those at Mt Kembla and Appin collieries resulted in loss of life and revisions to safety standards and regulations in the mining industry.
Tony Linnane NSW Trade & Investment Mine Safety - new WHS laws for mining
Tony Linnane NSW Trade & Investment Mine Safety - new WHS laws for miningNSW Environment and Planning
The document summarizes new mining safety laws in New South Wales that will harmonize regulations and introduce a comprehensive safety management system. It describes the consultation process, key elements of the new laws such as principal hazard management plans and control plans, requirements for registering plants and notifying of high-risk activities, and transitional arrangements. The presentation was part of an information seminar about the new laws.Viewers also liked (20)
Intelligent industrial wireless technology cliff rogers
Intelligent industrial wireless technology cliff rogers
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date...
Exploration in the House 2015: NSW Seamless Geology Project: Progress to date...
Bebelusii nu cauta scurtaturi si nu tin cont de gura lumii
Bebelusii nu cauta scurtaturi si nu tin cont de gura lumii
Exploration in the House 2015: The Importance of the Junior Sector for minera...
Exploration in the House 2015: The Importance of the Junior Sector for minera...
Exploration in the House 2015: Geology Survey of NSW Overview and highlights ...
Exploration in the House 2015: Geology Survey of NSW Overview and highlights ...
Tony Linnane NSW Trade & Investment Mine Safety - new WHS laws for mining
Tony Linnane NSW Trade & Investment Mine Safety - new WHS laws for mining
More from NSW Environment and Planning
12 Small mines report card 2020
The document outlines the compliance priorities and planned assessments for small mines from October to December 2020. It discusses setting compliance priorities every 6 months to increase transparency, community confidence, and compliance levels. The priorities include key statutory functions, roads and vehicle areas, structural integrity, electrical safety, and underground strata failure. It also notes 126 incidents from September 2019 to September 2020 and plans for 355 assessments of 149 mines to check statutory functions, roads, air quality, COVID-19 compliance, and other areas of concern.
11 occupational hygiene monitoring of dust
The document discusses occupational hygiene monitoring of dust in small mines and quarries. It outlines the types of dust monitored, including inhalable and respirable dust as well as crystalline silica dust. It describes how monitoring is conducted through personal and static sampling using filters and pumps to collect dust samples. Samples are then analyzed in a lab to determine dust composition and concentration, which are compared to workplace exposure standards. A free dust sampling program has been offered to small mines and quarries to assess high exposure activities and areas.
09 learning from disasters
This document provides information about learning from mining disasters, including case studies on specific incidents. It discusses Professor Michael Quinlan's 10 pathways to death and disaster, which include flaws in design, risk assessment, management systems, and regulatory oversight. Two case studies from Australia are examined in depth: the Albury Quarry dangerous blasting incident and the Maules Creek Mine incident. Both cases involved failures in design, risk assessment, management systems, and communication. The document also outlines responsibilities for safety of mine operators, quarry managers, contractors, and workers under Australian law. It stresses the importance of learning lessons from past incidents to strengthen safety practices and prevent future disasters.
13 explosives awareness
This document provides an overview of explosives awareness for small mines. It covers explosives legislation, transportation and storage, firing of shots, post-blast inspections, misfires, and responsibilities. Key points include that only licensed personnel can handle explosives, explosives must be transported and stored properly, exclusion zones must be established for safety during blasting, post-blast inspections are required before entry, and procedures for handling misfires are important for safety. Graphic examples of explosives incidents emphasize the need for proper handling and safety precautions when using explosives.
10 incident reporting to the regulator 2020
The document outlines notification requirements for incidents at mines under WHS laws. There are two types of notifiable incidents - prescribed serious injuries or illnesses, and prescribed dangerous incidents. Examples of each are provided. Mine operators must notify the regulator immediately of any notifiable incidents. The site of a notifiable incident must be preserved until an inspector arrives. Other incidents requiring medical treatment or that are high potential incidents also need to be reported.
08 dust safety and health surveillance
This document provides information from a small mines roadshow on dust safety and health surveillance. It discusses silicosis prevention, lowering the national silica exposure standard, and ensuring controls are effective. Monitoring results from a quarry showed exposures exceeding standards. Mine operators must review their plans, monitoring, and training to ensure compliance with the new standard of 0.05mg/m3 for respirable crystalline silica which took effect in July 2020. Health monitoring is important to complement safety controls and identify risks to workers.
07 feedback and consultation
The Small Mines Roadshow provided feedback and consultation for mine managers and safety personnel from October to December 2020. It asked how participants and their businesses were affected by the wildfires, floods, and Covid pandemic over the past 12 months. Attendees were encouraged to discuss what worked and didn't work in their emergency management plans, how their operations have modified due to Covid, and any changes in safety practices as mine managers. The roadshow aimed to facilitate open discussion on these issues.
06. how the regulator communicates with the industry
This document outlines the various methods used by the NSW Resources Regulator to communicate safety information to the mining industry. It discusses communication channels like inspections, safety alerts, bulletins, investigation reports, weekly incident summaries, notices, YouTube videos, and a regulator portal. It encourages mining site representatives to review these communications, ensure any recommendations are considered and implemented, and share applicable information with contractors and workers. Effective communication of safety information is important for compliance with work health and safety laws.
05 reviewing your SMS
The document discusses reviewing safety management systems for mines and petroleum sites. It notes that operators must review their SMS within 12 months of starting operations and every 3 years after. Additionally, if a risk control measure is revised, the SMS must be reviewed and revised accordingly. The review should consider audit results, incident reports, hazard identification, and regulatory changes. Information like these can help inform the SMS review process. The review aims to improve safety performance and prioritize higher risk issues through developing an action plan with tracked progress.
04. slinging and lifting equipment
This document discusses slinging and lifting equipment requirements for small mines. It provides information on operator competency licensing, types of work requiring different licenses, care and use of equipment, inspection schedules, storage requirements, discard criteria, and examples of compliant versus non-compliant equipment. Safety is emphasized, including using competent personnel, fit for purpose equipment, and never standing under suspended loads.
Control focused inspection tools (Mark Smith)
Consider if the regulator should explicitly focus on critical controls for significant risks as part of an incident prevention strategy.
Central assessment unit CAU(Steve Bentham)
The role of the CAU with the Resources Regulator, coal industry overview, communication of incidents, case studies
Autonomous mining equipment (Owen Barry)
This document summarizes autonomous mining projects in Australia and issues related to autonomous equipment. It describes several levels of automation from fully manual to fully autonomous operations. It then discusses specific autonomous projects using haul trucks, dozers, and drill rigs in New South Wales. The document outlines potential issues with autonomous equipment including safety, task planning, communications, and change management. It also describes an incident where a semi-autonomous dozer collided with a manned excavator, injuring no one. The document concludes with recommendations around controls to prevent workers from entering autonomous equipment areas and having physical barriers between manned and autonomous zones.
Fires on mobile plant refuelling (Ross Stutchbury)
This document analyzes fire incident data on mobile plant from July 2014 to March 2019. It shows trends in fires by month, quarter, sector, and potential heat and fuel sources. Investigation findings identify failures to identify risks, implement safe work systems, properly supervise work, provide adequate training, and use fit-for-purpose equipment. Recommendations focus on risk assessment, supervision, training, equipment design, and procedures to prevent fires during refueling. Specific case studies on refueling truck and grader fires provide additional investigation findings and recommendations.
Mobile plant rollovers and collisions (Bill McGlynn)
This document discusses several incidents involving mobile plant rollovers and collisions at coal mines. It summarizes three cases where dozers preparing shot ground rolled over due to a lack of situational awareness. Common factors identified were inadequate risk assessments and operators continuing work when unable to maintain situational awareness. Four light vehicle rollovers are also examined, with the primary causes found to be operators not focusing on their task or being distracted. Finally, the document outlines planned assessments of roads, traffic management, and operator competency at mines to improve safety.
Metropolitan colliery gas (Dave Gordon)
Workers were evacuated from Metropolitan Colliery on March 21st 2019 after gas levels rose in the longwall return. At 6:00pm, high CO2 was detected at the longwall face, causing operations to stop. At 7:15pm, all underground workers began withdrawing as CH4 levels continued rising. By 8:45pm all workers had been withdrawn and accounted for on the surface. Gas levels in the longwall return reached 16.1% CH4 and 15.9% CO2, while levels in the main upcast shaft were 3.01% CH4 and 4.16% CO2. Workers remained out of the mine for seven days as 2.9 million cubic metres of 38% CH
Airborne dust update (Mark Shepherd)
This document summarizes airborne dust monitoring results and discusses best practices for dust control in mining operations. Key points:
- Airborne dust monitoring results from 2017-2019 show levels decreasing but some operations still exceeding standards.
- Factors contributing to exceedances include increased stone cutting, poor panel ventilation, and inadequate dust controls when cutting.
- Examples of good dust control initiatives seen in industry include dust awareness training, respiratory protection policies, pre-start checklists, and use of real-time dust monitors.
- Effective dust control requires identifying all sources, implementing controls at each source, monitoring control effectiveness, and having response plans to address changing conditions before exposures occur. Complacency must be avoided to prevent
Emergency planning (Matt U'Brien)
Refining the focus - self escape system, emergency response capabilities and incident management capabilities
Electrical performance presentation (Craig Harris)
This document summarizes electrical incident data from various mining industries between 2018-2019. It reports on:
- 74 failures of explosion-protected equipment, primarily related to Ex d and cap lamp equipment.
- 44 electric shock events, most occurring in coal and metals mining. Common causes included welding, low voltage contact and lightning.
- 36 electrical fires identified across coal, metals and extractive mining industries. The majority involved mobile plant such as haul trucks and loaders.
Where do I stand for fire protection on mobile and transportable equipment an...
Where do I stand for fire protection on mobile and transportable equipment an...NSW Environment and Planning
The death of a truck operator in the USA in 2018 at a Peabody mine as a result of a fire highlights the importance of installing fire suppression systems. Firestorm has been involved in the world's largest retrofit of fire supression systems on buses. While buses may be considered simple for fire protection versus a mining machine, buses can carry up to 100 passengers and typically there is a lack of mechanical protection with the majority of the body made of fibreglass, wood and plastics that burn very quickly and are highly toxic. The risk for multiple deaths is therefore a much higher factor compared with a mining machine with one operator. The risk assessment required in AS5062-2016 needs to consider the egress paths available for an operator/passenger to safely evacuate the machine and consideration for actuators and fire extinguishers along this path.
Changes to laws in 2016 required the removal of PFAS and PFOS in both Queensland and South Australia with penalties noe effective for non-compliance. Several NSW mines have been put on notice by the Environmental Protection Agency (EPA) to prevent further contamination of waterways. Firestorm is now moving away from exposing our own people to PFAS/PFOS systems to ensure we are providing best practice even though laws are not yet in place for NSW. This presentation looks at what it means if you choose to move away from PFAS/PFOS systems.More from NSW Environment and Planning (20)
06. how the regulator communicates with the industry
06. how the regulator communicates with the industry
Fires on mobile plant refuelling (Ross Stutchbury)
Fires on mobile plant refuelling (Ross Stutchbury)
Mobile plant rollovers and collisions (Bill McGlynn)
Mobile plant rollovers and collisions (Bill McGlynn)
Electrical performance presentation (Craig Harris)
Electrical performance presentation (Craig Harris)
Where do I stand for fire protection on mobile and transportable equipment an...
Where do I stand for fire protection on mobile and transportable equipment an...
Recently uploaded
2024: The FAR - Federal Acquisition Regulations, Part 43
Jennifer Schaus and Associates hosts a complimentary webinar series on The FAR in 2024. Join the webinars on Wednesdays and Fridays at noon, eastern.
Recordings are on YouTube and the company website.
https://www.youtube.com/@jenniferschaus/videos
Spending in the 340B Drug Pricing Program, 2010 to 2021
Presentation by Rebecca Sachs and Joshua Varcie, analysts in CBO’s Health Analysis Division, at the 13th Annual Conference of the American Society of Health Economists.
CBO's Immigration Projections - Presentation
Presentation by Julie Topoleski, CBO’s Director of Labor, Income Security, and Long-Term Analysis, at the 16th Annual Meeting of the OECD Working Party of Parliamentary Budget Officials and Independent Fiscal Institutions.
一比一原版办理（UQ毕业证)昆士兰大学毕业证
一比一原版退学买【微信：176555708】【《昆士兰大学毕业证》(UQ学位证成绩单)】【微信：176555708】(留信学历认证永久存档查询)采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：176555708】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理昆士兰大学毕业证（UQ学位证）学位证【微信：176555708 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理昆士兰大学毕业证（UQ学位证）学位证【微信：176555708 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理昆士兰大学毕业证（UQ学位证）学位证【微信：176555708 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理昆士兰大学毕业证（UQ学位证）学位证【微信：176555708 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版(uoit毕业证书)加拿大安大略理工大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoit毕业证书)加拿大安大略理工大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoit毕业证书)加拿大安大略理工大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoit毕业证书)加拿大安大略理工大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoit毕业证书)加拿大安大略理工大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoit毕业证书)加拿大安大略理工大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
EI Statistical Review of World Energy 2024
FT author
Amanda Chu
US Energy Reporter
PREMIUM
June 20 2024
Good morning and welcome back to Energy Source, coming to you from New York, where the city swelters in its first heatwave of the season.
Nearly 80 million people were under alerts in the US north-east and midwest yesterday as temperatures in some municipalities reached record highs in a test to the country’s rickety power grid.
In other news, the Financial Times has a new Big Read this morning on Russia’s grip on nuclear power. Despite sanctions on its economy, the Kremlin continues to be an unrivalled exporter of nuclear power plants, building more than half of all reactors under construction globally. Read how Moscow is using these projects to wield global influence.
Today’s Energy Source dives into the latest Statistical Review of World Energy, the industry’s annual stocktake of global energy consumption. The report was published for more than 70 years by BP before it was passed over to the Energy Institute last year. The oil major remains a contributor.
Data Drill looks at a new analysis from the World Bank showing gas flaring is at a four-year high.
Thanks for reading,
Amanda
Was this forwarded to you?
If you’re a Premium FT subscriber, sign up here to get this newsletter delivered straight to your inbox.
Sent Tuesdays and Thursdays.
Not a Premium subscriber?
Take out a subscription, or upgrade from standard.
New report offers sobering view of the energy transition
Every year the Statistical Review of World Energy offers a behemoth of data on the state of the global energy market. This year’s findings highlight the world’s insatiable demand for energy and the need to speed up the pace of decarbonisation.
Here are our four main takeaways from this year’s report:
Fossil fuel consumption — and emissions — are at record highs
Countries burnt record amounts of oil and coal last year, sending global fossil fuel consumption and emissions to all-time highs, the Energy Institute reported. Oil demand grew 2.6 per cent, surpassing 100mn barrels per day for the first time.
Meanwhile, the share of fossil fuels in the energy mix declined slightly by half a percentage point, but still made up more than 81 per cent of consumption.
一比一原版英国阿伯丁大学毕业证(AU毕业证书)学历如何办理
退学办理文凭【微信号:176555708】【(AU毕业证书)】【微信号:176555708】《成绩单、外壳、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号:176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号:176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(theauckland毕业证书)新西兰奥克兰大学毕业证成绩单如何办理
原版定制【微信:741003700】《(theauckland毕业证书)新西兰奥克兰大学毕业证学位证成绩单》【微信:741003700】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份毕业证【Q微信741003700】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【Q微信741003700】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
一比一原版加拿大麦科文大学毕业证如何办理
原版一模一样【微信：741003700 】【加拿大麦科文大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理加拿大麦科文大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理加拿大麦科文大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理加拿大麦科文大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理加拿大麦科文大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
G7 Apulia Leaders Communique, 14th June 2024
G7 Apulia Leaders Communique, June 2024
" The present Canon of the West"
Health Insurance Coverage for the U.S. Population, 2024 to 2034
Presentation by Jessica Hale, an analyst in CBO’s Budget Analysis Division, at a press briefing organized by "Health Affairs."
Jabatan Fungsional: Konsep, Peran & Prospeknya
Disampaikan pada FGD Kepmen Pertahanan tentang Organisasi Profesi JF Analis Pertahanan Negara
Jakarta, 20 Juni 2024
Dr. Tri Widodo W. Utomo, SH. MA.
Deputi Bidang Kajian Kebijakan dan Inovasi Administrasi Negara LAN RI
G7 Apulia Leaders Communique, June 2024 (1).pdf
G7 Apulia Leaders Communique, 14th June 2024
"The present Canon of the West"
Lecture 7 Module VII Agriculture Insurance - Support Services (2).pdf
Agriculture Insurance - Support Services
The Power of Community Newsletters: A Case Study from Wolverton and Greenleys...
YOU WILL DISCOVER:
The engaging history and evolution of Wolverton and Greenleys Town Council's newsletter
Strategies for producing a successful community newsletter and generating income through advertising
The decision-making process behind moving newsletter design from in-house to outsourcing and its impacts
Dive into the success story of Wolverton and Greenleys Town Council's newsletter in this insightful webinar. Hear from Mandy Shipp and Jemma English about the newsletter's journey from its inception to becoming a vital part of their community's communication, including its history, production process, and revenue generation through advertising. Discover the reasons behind outsourcing its design and the benefits this brought. Ideal for anyone involved in community engagement or interested in starting their own newsletter.
Recently uploaded (20)
2024: The FAR - Federal Acquisition Regulations, Part 43
2024: The FAR - Federal Acquisition Regulations, Part 43
Spending in the 340B Drug Pricing Program, 2010 to 2021
Spending in the 340B Drug Pricing Program, 2010 to 2021
Health Insurance Coverage for the U.S. Population, 2024 to 2034
Health Insurance Coverage for the U.S. Population, 2024 to 2034
Lecture 7 Module VII Agriculture Insurance - Support Services (2).pdf
Lecture 7 Module VII Agriculture Insurance - Support Services (2).pdf
The Power of Community Newsletters: A Case Study from Wolverton and Greenleys...
The Power of Community Newsletters: A Case Study from Wolverton and Greenleys...
Proximity detection workshop opening address rob regan
- 1. Proximity Detection & Collision Avoidance Systems Workshop Industry & Investment NSW Mine Safety Operations Rob Regan Chief Inspector Coal Mines, Chief Inspector Mines, Director Mine Safety Operations 8th - 9th February 2011
- 2. Content of the Workshop Case studies of incidents Looking at electronic systems with a view to Functional Safety The Human side of Engineering Suppliers Presentations Feedback from Mine Operators Where to from here
- 3. How Large is the Issue? NSW Surface Coal Only 34 surface mines in NSW 1000 large trucks and growing 550 light vehicles 91 excavators 16 shovels 11 draglines Incidents Cost
- 4. Proximity Detection & Collision Avoidance Systems Workshop Industry & Investment NSW Mine Safety Operations