Download to read offline
Process journal feb 17, 2011
- 1. PROCESS JOURNAL February 17,2011 Measuring And Marking Out a Doorstop Today, we started to made our doorstop in the workshop. The doorstop I decided to make was a shape of a hamburger. First we need to used the try square and the metal rule to measure the pine wood. We can made 4 doorstops for each of the pine wood. When we finished the measuring, we measured it in 166mm and 16mm. Then we going to cut it!!!! We used the bench hook to hold it. We needed to cut it half we down, so we were used a things that called saws to cut it in half way. Mr. Anderson taught us those ways that are easy for us to cut it out. When we finish cutting we need to cut it to the shape of a doorstop, so we need to use a material called Cross Out Saws. I didn’t started to cut it in another way, so i will do it in my next class. I think one of the AOI was related to our class today is Human Ingenuity, because Human Ingenuity is the only AOI that were make things, and also Health because we were wear apron and we also wear safety goggles. I think its really interesting to make our own doorstop and designed it, and this is my first experiment to design a thing and also made it. I think I will do better in the next class. HERE ARE THE PICTURES I TAKE DURING THE CLASS: This picture shows that I was used a try square to measure a pine wood. This picture shows that i was used a
- 2. metal rule tomeasure a pine wood, so we can make sure where we need to cut when we cut it down in half way. This picture shows that i was used a handsaw to cut the pine wood in half way down. This picture shows that i was wearing a apron to cover my cloth.