The document describes drilling holes and sanding the edges of a pig sculpture. It discusses using clamps to securely hold the pieces together while drilling. Filing was found to be easier and faster than sandpaper for sanding the edges of the pig's face and back. The next steps will be to sand dowels and add rounded spheres inside the dowels.

1. -572135508635~Drill hole & Sanding edge of Pig’s face and back/ Sanding dowels~ Wednesday 27/04/11<br />Using file to sandingSanding edge of pig’s face and back22860005080000-26289004572000-26289002667000 Today I finished drill hole. I had to drill hole like this picture. I used G clamps to hold tow bases together. Emotion- before drill hole, I felt ‘it’s very easy’, but actually the G clamps are kind of heavy and I had to hold G clamps. So it was little bit difficult. When I finished drill hole, I get tired, because of G clamps. I had to hold G clamps stronger. Then it wouldn’t move and I wouldn’t drill hole different position. First time, I didn’t hold G clamps strong so the drill pit touch with pig’s face and back, it moves and I shaved little bit to different position. Anyway I finished drill hole. Next, I sand edge of Pig’s face and back. First time, I was using sanding block and sand paper to sand edge of pig’s face and back. But Ana and Diane said ‘file is more easy to sand edge of Pig’s face and back.’ So I changed to file and sand it. It was easy and fast, but it would be rough. After sanding Pig’s face and back, I sand Dowel’s middle. I haven’t finished it all. So NEXT class will be sand others dowel, and I will make rounds for inside of dowels. The spheres will be like this. <br />The spheres size will bigger then width between one dowel and one dowel. <br />Sanidng middle of dowels<br />-2510790127000AOI-Approaches to learning (ATL)<br /> Today my friend approached me to learning different usage of tools. Like file and sand paper. Those tools are for sanding, but file is more easy and fast for sand edge of Pig’s face and back. <br />