berthhhtb yyny tyny

1. République Tunisienne
Ministère de l’Enseignement Supérieur et de la
Recherche Scientifique
Assembly system of connector and the lid

2. plan
1. Introduction
2.Presentation of kromberg
and shubert
3. Functional needs analyses
5. Visualizations on
ABACUS
6. Conclusion

3. 1.
Introduction

4. Introduction
Our project focuses on the design study of a system for assembling
two plastic components of an automotive connector

5. North America
South America
Europe
Asia
South Africa
The different KROMBERG & SCHUBERT sites

6. System modeling

7. Cinematic diagram

8. 4.
Design of assembly system of the
connector and the lid

9. Connector
Female part
Pièce mâle
Connector

10. Bottom plate
The bottom plate design is based on:
• Location of the male connector
• Automatic loading of the female part
• Fixation with the operating table

11. Top plate
The top plate is designed considering 3 main parts
• Translation guidance
• Support
• Removing the assembled connector

12. Connecting Rod and Crank
The Connecting Rod is designed taking into account:
• Pivot link
• Transformation of rotation into translation

13. Guiding elements
Guide plate with holes Guide rod Guide plate without holes

14. Screw
screw M5*10 Vis M6*30
Vis M5,5*30

15. Standard elements
Circlips
Ring 4
Ecrou M6

16. Assembly

17. Exploded view of the assembly

18. 5.
Visualizations on ABACUS

22. 6.
Conclusion

23. Tasks implemented during this project
• Modelization
• Mechanical concept
• Numerical simulation