Визуальное моделирование ЕИП машиностроительного предприятия с помощью методо...Pavel Safin
Презентация дипломного проекта на тему «Визуальное моделирование единого информационного пространства машиностроительного предприятия с помощью методов и средств программной инженерии», который я защищал в 2010 году.
Визуальное моделирование ЕИП машиностроительного предприятия с помощью методо...Pavel Safin
Презентация дипломного проекта на тему «Визуальное моделирование единого информационного пространства машиностроительного предприятия с помощью методов и средств программной инженерии», который я защищал в 2010 году.
27-28 февраля 2015 г. в Университете машиностроения прошла всероссийская научно-практическая конференция «Интерактивное образование в инженерном вузе», посвященная инновационным форматам в высшем техническом образовании. В рамках секции «Развитие компетенций инженеров в области САПР» руководитель образовательной программы "Системная интеграция САПР-решений" Андрей Юрьевич Филиппович представил доклад "Использование стандартов WorldSkills для совершенствования САПР-подготовки студентов", а также принял участие проектной сессии по вопросам использования конкурсных заданий, методик и систем оценивания в традиционном учебном процессе.
В.Мизгулин -- программа магистратуры по системной инженерииAnatoly Levenchuk
Доклад В.Мизгулина "Программа магистратуры по системной инженерии" на 7й рабочей встрече Русского отделения INCOSE по проблемам системной инженерии, 23 апреля 2016г.
27-28 февраля 2015 г. в Университете машиностроения прошла всероссийская научно-практическая конференция «Интерактивное образование в инженерном вузе», посвященная инновационным форматам в высшем техническом образовании. В рамках секции «Развитие компетенций инженеров в области САПР» руководитель образовательной программы "Системная интеграция САПР-решений" Андрей Юрьевич Филиппович представил доклад "Использование стандартов WorldSkills для совершенствования САПР-подготовки студентов", а также принял участие проектной сессии по вопросам использования конкурсных заданий, методик и систем оценивания в традиционном учебном процессе.
В.Мизгулин -- программа магистратуры по системной инженерииAnatoly Levenchuk
Доклад В.Мизгулина "Программа магистратуры по системной инженерии" на 7й рабочей встрече Русского отделения INCOSE по проблемам системной инженерии, 23 апреля 2016г.
Внедрение ECM, диалог ИТ с бизнесом - CNews, МакаровStanislav Makarov
Для успешного внедрения ECM нужно чтобы не только ИТ научились говорить на языке бизнеса. Пока бизнес не начнет понимать возможности, ограничения и риски технологий и ECM в частности, толку от таких внедрений не будте.
Особенности проектирования iPad приложений для бизнесаArtem Kuznetsov
Многие из вас уже столкнулись с такой задачей как «перенос desktop-приложений в мобильную среду», а именно адаптация для iPad. При переносе в мобильную среду возникают следующие вопросы:
- Переносить ли полностью весь функционал или только часть?
- Если только часть, то какую?
- Какие нужно учитывать особенности мобильного устройства кроме «размера экрана» или «отсутствия нормальной клавиатуры и мыши»?
- Какие есть «фишки» в мобильной среде и в частности на iPad’e.
- Чем отличаются пользователи desktop-компьютеров от пользователей мобильных устройств?
- Какие есть практические рекомендации при проектировании мобильных приложений под iPad.
Для того, чтобы спроектировать эффективное и успешное приложение под iPad не достаточно просто следовать стандартам операционной системы или копировать успешные решения других компаний. Необходимо применить комплексный подход, учитывающий все факторы мобильной среды.
В своем докладе я расскажу о том:
- Как проводить процесс проектирования с нуля.
- Как нужно учитывать стандарты.
- Как искать «фишки» и что таковыми не является.
- Какими “фичами” можно пожертвовать.
-Почему важны контекстные сценарии.
- Чем отличается проектирование мобильных приложений от обычных десктоп-приложений.
- Особенности переноса десктоп приложений на мобильные платформы.
Дам ряд практических рекомендаций и примеров.
Benefits of Knowledge Graphs and AI For Enterprise PLM PlatformsOleg Shilovitsky
To Harness The Potential Of Product Data
Accelerating Enterprise Digital Transformation: Benefits of Knowledge Graphs and AI For Enterprise PLM Platforms
Oleg Shilovitsky's presentation at PI DX 2023 Conference, Atlanta GA.
PI DX 2020 Atlanta - Data Management Strategy. _ How Do You Establish a Commo...Oleg Shilovitsky
The rise of data and the new economy has led to a paradigm shift that is redefining our world. In today's digital age, information reigns supreme as currency for businesses looking towards an accelerated productivity level with advanced technologies in place; this will allow you to be more competitive by boosting efficiency across all departments at once!
The most common data challenges faced by businesses are talked about in detail during this session. You will learn how to overcome them and get practical tips that can help your company succeed.
You will gain new insights into the following topics:
1. Avoiding breakdowns in information flows throughout the organization
2. Optimization processes and connecting data silos
3. Making the technology work for your data flow
4. Giving people the right tools to communicate and collaborate
5. Designing effective education of your users to support data sharing across the business
You're going to see the technological stack and the strategy I used to develop OpenBOM platform.
The trajectory of traditional PLM development put adoption in the second phase. Software vendors usually sold slide decks with the great future and then companies and implementation consultants together with PLM service providers were coming to implement what was sold before. It caused many delayed projects, misalignments, failures, and delayed projects. The reality of the implementation was not in sync with the slide decks presented in the boardrooms.
Modern PLM systems make the adoption process different. It all comes down to a single word “experience” we discussed over the course of previous sessions of Demystifying Modern PLM Events. The SaaS technology made systems available instantly to everyone, online training materials, early connection to the sales and marketing team, and ability to provide online support combined with the intelligence of modern platforms changed the experience of the customers.
Which changed the adoption curve and relationships between vendors and customers. In this webinar session Helena Gutierrez, CEO, and co-founder of Share PLM shares his experience and knowledge she has in many implementations of modern PLM systems.
Legacy PLM products are monolithic systems that must be installed, configured, and tuned. The overall process was taking a long time and once done companies were not running fast to make another cycle of the product deployment. Such on-premise product environments served a very large enterprise company spending months (sometimes years) to get it done. It is still an ok process, but there is something new happening - PLM products are turning into services that can be run all the time, all over the world, available to everyone and providing an environment that can be used by multiple companies at the same time, seamlessly upgraded and individually configured for each user and/or company.
Moving from products to services brings a huge difference to the PLM industry and to all customers using new PLM services. Here are the top differentiating features of these products.
Scalable data management
Global data access and instant data sharing
Data intelligence and analytics
The biggest difference is the focus on a broad spectrum of user experience that starts from the first time a potential customer touches the website and goes much further than installation and configuration by connecting to the customers that are using products in real-time. This is the list of what is covered by a modern user experience:
Marketing
Sales
Technical Presale
Application Features
Online Support
New Features
Problem Fixes
Customer feedback and Net Promoter Score
Welcome to the next session of the “Demystifying Modern PLM” event. Our online event is a set of four webinars for manufacturing companies, engineers, contractors, and suppliers who work in a modern online industrial world. In this session, we will speak about how Modern PLM is impacting Sales and Marketing.
In the past, the PLM sales were done in a boardroom during a 4 days workshop when the company was typically gathering their stakeholders and they usually listened to the presentations provided by a vendor and implementing partners. A big event was getting attention, strategy discussion, and a major decision of the company to commit to the next 5 years PLM program.
While nothing from what I just said is obsolete, there is something new in the air now. I call it the cloud mindset. This means that modern days people like to Google everything and learn about every topic online first. Which turns the story of PLM sales upside down. People are less interested in presentations (that can be watched online anyway) and not looking at how to get a big promise for the next five years. Opposite to that companies are interested in experiencing the future products online, learning more about them, checking how they can be used, and then making a decision.
“Demystifying Modern PLM” is a four-part online virtual event for manufacturing companies, engineers, contractors, and suppliers who work in a modern online industrial world where they need to collaborate with teams located everywhere, and they must embrace the best technology to deliver innovative products.
In this web event the co-founders of OpenBOM™, a leading SaaS digital network-based global collaborative platform, and Share PLM, a leading education technology company, will focus on sharing their knowledge and experience of developing modern PLM systems.
These four interactive sessions will cover the Technology, Product, Marketing, and Education aspects of modern product development environments, and focus on best practices that both companies have gathered through their work with customers across the globe.
https://www.shareplm.org/openbom-share-plm-webinars/
Demystifying Modern PLM Sessions. Part 1: TechnologyOleg Shilovitsky
Session 1 - Technology: Understanding the Characteristics of Modern PLM Software
OCTOBER 26, 2021 - 10:00 EDT/16:00 CET
In this session, Oleg will guide you through the components of modern PLM technology. He will help you understand the difference between new, flexible tools and traditional, monolithic systems.
OpenBOM is a global collaborative SaaS platform for industrial companies. It helps you to manage Parts, Documents, Bill of Materials, Vendors, and Purchases. OpenBOM connects engineers, production teams, contract manufacturers, and suppliers in a single network helping them to share data and collaborate.
OpenBOM SaaS PLM for Onshape [Webinar Slide Deck]Oleg Shilovitsky
This is a slide deck from the webinar presenting OpenBOM SaaS PLM for Onshape. At this webinar, we speak about how SaaS PLM is different, present new OpenBOM features for Onshape, and give you a full walkthrough of how collaborative BOM management, production planning and purchasing process.
The slide deck of my webinar speaking about the current challenges of product lifecycle management customers, products, technologies, and future trends. I share my experience and perspective on how NETWORK platforms will change the landscape of PLM in the next 10 years.
Webinar #30 - Managing Multi-level BOMs in OpenBOM Oleg Shilovitsky
This is part 1 of the webinar about how to create multi-level BOMs using OpenBOM. You will learn how to create, restructure and add data to multi-level BOMs.
In this webinar, we explain how to use OpenBOM with Autodesk Inventor including:
Lesson #1 - OpenBOM and Inventor Settings
Lesson #2 - Make a BOM of the bike fork. Add a property in Inventor, Update the OpenBOM
Lesson #3 - (Re) organizing items into Categories (Catalogs). Ex. Hardware
Lesson #4 - Assigning Costs, Rollups and Assigning Vendors
Lesson #5 - Creating an Order BOM and POs
Lesson #6 - BONUS - creating a Template for future BOMs
Mastering SOLIDWORKS BOMs in OpenBOM - Part IV (Webinar #27 - )Oleg Shilovitsky
The final part of OpenBOM Mastering for SOLIDWORKS speaks about how to manage changes and updates in BOMs created from Solidworks. It includes changes in design, revisions, and FFF principles.
Webinar #25 - OpenBOM and Solidworks Best Practices, Part TwoOleg Shilovitsky
This is a slide deck for the 2nd webinar about Solidworks and mastering the Bill of Materials using OpenBOM. In this webinar, we discuss classifications, templates and bi-directional properties
This is a slide deck for OpenBOM webinar #24 about BOMs in Solidworks. It is first in the set of 4 webinars about Solidworks BOMs and OpenBOM. Check help.openbom.com for webinar recording.
This is a slide deck for the OpenBOM webinar about formulas and calculations. It focuses on new features in OpenBOM June 2020 release - catalog formulas, automatic formulas, and more...
In this presentation, we speak about how to organize and use OpenBOM templates for better productivity and re-usability. You will learn how to create a template from a BOM and use it to create BOMs manually or using CAD add-ins