Password operated device control using mobile communication
•Download as DOCX, PDF•
0 likes•1,422 views
This document describes a project to develop an embedded system that controls devices using passwords sent via mobile communication. The system is implemented using an 8051 microcontroller connected to a GSM modem, LCD display, and relays to control devices. It allows authorized users to control lights, climate, doors and other devices remotely by sending password commands through text messages.
Report
Share
Report
Share
Recommended
Pir and gsm based house security system
This document describes a PIR and GSM based home security system. The system uses a sensor to detect intruders and notifies the homeowner through an alarm and SMS message. It continuously monitors the sensor status and automatically sends SMS alerts to the user if the sensor is triggered. The system aims to provide security for homes, banks, and companies through detection and remote notification capabilities.
gsm based security system
suppose this security system is fitted in your car . If a thief breaks in and tries to drive away your car then he/she have enter the code for ignition .If the code mismatches then it will send a message to the proprietor's cell "security breach".By this we will come to know that someone is trying to steal your car.
"THAT IS THE IDEA OF THE PROJECT"
Yuva Home automation project
This document describes a GSM-based home automation system that allows users to remotely control and monitor home appliances via SMS after authentication. The proposed system aims to overcome issues with existing manual systems by allowing remote control and scheduling of devices to save time and energy. The system uses a GSM modem connected to a microcontroller to send and receive SMS commands to control relays and devices like lights and fans. It provides advantages like low cost and global access but has delays due to mobile networks. The system could be enhanced with security cameras for remote monitoring.
Automobile security system using digital password
This document describes an automobile security system using a digital password. The system includes a keypad to enter a password, an LCD display, and a microcontroller. The user can set their own password for the system, which then allows them to unlock the device by entering the correct password code via the keypad. The system provides electronic access control and protection for automobiles using a digital password input and verification method.
Automobile security system using digital password
This document describes an automobile security system using a digital password. The system includes a keypad to enter a password, an LCD display, and a microcontroller. The password is used to unlock the system and provide access to the automobile. Users can set their own password for added security protection. The system allows entry through electronic verification of a digital password rather than a traditional key or mechanical lock.
Home Automation Catalog
The document summarizes an intelligent wireless security and lighting control system called AccessNode that allows users to control devices remotely through an app or remote. The system uses reliable two-way RF technology and forms a mesh network between devices. It includes features like automated lighting schedules and occupancy simulation to save energy and provide security while away from home. The system offers switches, dimmers, security cameras, sensors and other devices that are customizable and come with warranty support.
54 sms based irrigation system
This document describes an SMS based irrigation system that allows controlling irrigation remotely via SMS. The system uses a microcontroller, GSM module, sensors, and other components. It allows turning the irrigation on and off remotely by SMS, monitors soil moisture and temperature, and sends notifications on irrigation status. The microcontroller is programmed using Embedded C on the Keil IDE to control the system components and SMS communication.
GSM-BASED-HOME-AUTOMATION-PPT
This document describes a GSM-based home automation system that allows users to control home appliances like lights and water pumps remotely using a mobile phone. It consists of a microcontroller, DTMF decoder, relay driver, relays and a GSM module. The microcontroller receives phone signals via the GSM module and decodes the DTMF tones to determine which appliance to operate. It then triggers the appropriate relay through the relay driver to turn appliances on or off remotely. The system provides remote home security and control for elderly and disabled users at a low cost. It could also be expanded to automate more devices and include feedback on appliance states.
Recommended
Pir and gsm based house security system
This document describes a PIR and GSM based home security system. The system uses a sensor to detect intruders and notifies the homeowner through an alarm and SMS message. It continuously monitors the sensor status and automatically sends SMS alerts to the user if the sensor is triggered. The system aims to provide security for homes, banks, and companies through detection and remote notification capabilities.
gsm based security system
suppose this security system is fitted in your car . If a thief breaks in and tries to drive away your car then he/she have enter the code for ignition .If the code mismatches then it will send a message to the proprietor's cell "security breach".By this we will come to know that someone is trying to steal your car.
"THAT IS THE IDEA OF THE PROJECT"
Yuva Home automation project
This document describes a GSM-based home automation system that allows users to remotely control and monitor home appliances via SMS after authentication. The proposed system aims to overcome issues with existing manual systems by allowing remote control and scheduling of devices to save time and energy. The system uses a GSM modem connected to a microcontroller to send and receive SMS commands to control relays and devices like lights and fans. It provides advantages like low cost and global access but has delays due to mobile networks. The system could be enhanced with security cameras for remote monitoring.
Automobile security system using digital password
This document describes an automobile security system using a digital password. The system includes a keypad to enter a password, an LCD display, and a microcontroller. The user can set their own password for the system, which then allows them to unlock the device by entering the correct password code via the keypad. The system provides electronic access control and protection for automobiles using a digital password input and verification method.
Automobile security system using digital password
This document describes an automobile security system using a digital password. The system includes a keypad to enter a password, an LCD display, and a microcontroller. The password is used to unlock the system and provide access to the automobile. Users can set their own password for added security protection. The system allows entry through electronic verification of a digital password rather than a traditional key or mechanical lock.
Home Automation Catalog
The document summarizes an intelligent wireless security and lighting control system called AccessNode that allows users to control devices remotely through an app or remote. The system uses reliable two-way RF technology and forms a mesh network between devices. It includes features like automated lighting schedules and occupancy simulation to save energy and provide security while away from home. The system offers switches, dimmers, security cameras, sensors and other devices that are customizable and come with warranty support.
54 sms based irrigation system
This document describes an SMS based irrigation system that allows controlling irrigation remotely via SMS. The system uses a microcontroller, GSM module, sensors, and other components. It allows turning the irrigation on and off remotely by SMS, monitors soil moisture and temperature, and sends notifications on irrigation status. The microcontroller is programmed using Embedded C on the Keil IDE to control the system components and SMS communication.
GSM-BASED-HOME-AUTOMATION-PPT
This document describes a GSM-based home automation system that allows users to control home appliances like lights and water pumps remotely using a mobile phone. It consists of a microcontroller, DTMF decoder, relay driver, relays and a GSM module. The microcontroller receives phone signals via the GSM module and decodes the DTMF tones to determine which appliance to operate. It then triggers the appropriate relay through the relay driver to turn appliances on or off remotely. The system provides remote home security and control for elderly and disabled users at a low cost. It could also be expanded to automate more devices and include feedback on appliance states.
Literature survey
This document summarizes several home automation and security systems proposed in previous research papers. It describes systems that use password protected door locks, car theft prevention that disconnects the ignition, home security using web cameras or SMS to detect intruders, a wireless sensor network and GSM based system to detect intrusion and fires remotely, and a low cost system that can operate in internal or external modes to detect security issues and notify users or emergency services. The systems aim to automate tasks and increase security and safety in homes and vehicles.
Implementation of Home Security System using GSM module and Microcontroller
Home security systems use wireless technology like GSM to monitor doors and appliances and send SMS alerts. A system uses magnets on doors connected to relays, which trigger LED lights and activate a GSM chip to send SMS messages to a stored phone number if the magnet connection is broken or restored, as controlled by code on a microcontroller. GSM is a widely used global standard for mobile communication that allows roaming between networks.
Keypad Based Bank Locker Security System Using Gsm Technology
Banking is one of the sectors where technology and advancements in technologies have not been utilized to the fullest potential. In the security systems even today very old practices are followed that can be made lot better using technologies like GSM which is easily usable and also easy to implement at a consumer level. In this project we propose a GSM based secure access which can provide a sophisticated theft alert system for bank locker system. This system contains microcontroller, keypad, GSM module and LCD display. By using keypad we need to enter the password that is provided to the authenticated persons. If the password entered is wrong then the GSM network converts the digital information into airborne signals and SMS is transferred to the registered mobile number. This system offers better solution for the bank security system and it will also help us to track the person who tried to open the locker without the permission and proper authentication.
Group-3
This presentation summarizes a student project on developing a home automation and security system using GSM technology. It was prepared by three students for their department supervisor. The presentation outlines the objectives, which are to develop a wireless home automation system using GSM to remotely monitor and control devices. It describes the basic working of the system with a microcontroller receiving SMS commands from a mobile phone to operate devices. The hardware and software components used are also summarized, along with the advantages of flexibility, security and power savings enabled by the remote control functionality.
Gsm based home automation
This presentation is based on the controlling of home appliances using simple commands. The key components are a SIM 300 GSM module, an Arduino UNO board and a 4 channel 12 volt relay.
Microcontroller based smart home with security using gsm technology
Abstract Smart home is a house that uses information technology to monitor the environment, control the electric appliance and communicates with the outer world. Smart home is a complex technology, at the same time it is developing. A smart home automation system has been developed to automatically achieve some activities performed frequently in daily life to obtain more comfortable and easier life environment. Security has becoming an important issue everywhere. Home security is becoming necessary nowadays as the possibilities of intrusion are increasing day by day. Safety from theft, and fire are the most important requirements of home security system for people. A traditional home security system gives the signals in terms of alarm. With the help of technology development, this research take a chance to implement these technologies to help people to protect and control their home appliance remotely .The purpose of this research is to create a system that make the surveillance of home devices easily. The technology that used in this research are GSM (Global System for digital mobile telecommunication ) and Microcontroller .The GSM module is used to communicate with the owner of the home whenever the sensor senses a fault , a specific message is sent to the owner in order to take a necessary action . The microcontroller is a tool that use a specific code to do some functions by using MikroC programmer. This project controls and monitors temperature, smoke, intrusion motion, magnetic lock door, garage door and irrigation. This project is expected to achieve, safety, save effort, save time, and easy devices control Keywords: Smart home, GSM module, magnetic lock, microcontroller
SMS(GSM)BASED HOME AUTOMATION SYSTEM PROJECTS-ECE/EEE/E&I/ICE
The document discusses using a GSM-based system to remotely control home and industrial appliances from anywhere via mobile phone. GSM is a digital cellular network available globally that also enables digital data services. The project uses sensors to detect abnormalities and send alerts to a user's phone via a GSM modem connected to a microcontroller. The user can also send SMS messages to control devices connected to the system, like lights or fans, and receive a response about their status.
gsm based home automation
The document describes a home appliance control system based on GSM network technology that allows users to remotely control appliances via SMS. A microcontroller receives SMS commands and uses a relay circuit to operate appliances. Key advantages are ubiquitous access, wireless operation for adaptability and cost-effectiveness, and power conservation. Limitations include the receiver needing a constant power supply and cellular signal to operate connected devices.
Code modulation based encryption & descryption technique for secure communica...
This document describes a code modulation based encryption and decryption technique for secure wireless communication. The system has a transmitter section and receiver section, each designed around a microcontroller. The transmitter encrypts data entered into a PC and sends it via RF to the receiver. The receiver decodes the encrypted data and displays it on a PC. To view the actual data, a password must be entered which decrypts the cipher text into plaintext. Block diagrams show the components in the transmitter including an encoder, microcontroller, and RF transmitter, and in the receiver including a decoder, microcontroller, and RF receiver.
Home automation and Digital notice board using android app
This document describes a home automation system using an LPC2148 microcontroller, GSM modem, relays, and an Android application. The system allows users to control appliances and view a digital notice board remotely using the Android app via GSM. The LPC2148 microcontroller interfaces with the GSM modem to receive control messages and trigger relays to operate appliances. The system provides a low-cost, flexible, and secure remote automation solution.
Industrial automation using gsm (ppt)
This document proposes a GSM-based industrial automation system that uses a PSoC microcontroller to monitor and control industrial devices via SMS commands sent from a mobile phone. Sensors detect process variables and relay switches control devices. The GSM modem provides wireless communication between the system and maintenance officers who can remotely monitor sensors and control machinery from anywhere using their mobile phones. This low-cost solution aims to reduce maintenance costs and optimize critical monitoring compared to existing wired, wireless, and RF-based systems.
smart Home security
This document describes a smart home security system that uses wireless sensor networks and GSM technology. The system can detect theft, gas leaks, temperature changes and send alarm messages to a mobile phone. It allows users to control home appliances like fans and lights remotely. The system uses low-cost and commonly available components like cell phones, SIM cards, and GSM modems. Sensors for smoke, LPG, temperature, and motion can trigger alarm messages. The system has applications for home, locker, industrial and bank security.
Home automation
This document describes a Zigbee-based home automation system that provides centralized wireless control of building devices. The system uses an LPC2148 microcontroller to monitor sensors like IR, smoke, light, temperature, and control appliances through a relay. Zigbee is used for wireless communication between devices as it consumes low power and supports up to 64k nodes. The system allows remote monitoring of building parameters and automation of devices to save time and energy compared to manual control. Potential applications include home, office, and industrial appliance automation and control.
Ppt
This document describes a remote home security system using a wireless sensor network and GSM technology. The system aims to detect theft, gas leaks, and temperature changes and send alarm messages remotely. It uses an ARM or AT89S52 controller, GSM module, smoke sensor, LPG sensor, temperature/PIR sensor, infrared sensor, LCD, and MAX232 IC. The system's block diagram shows sensors connecting to an embedded controller that communicates via GSM to authorized mobile phones. It allows monitoring a home security system remotely.
New projects list
This document provides details about electronics projects available from Easy Electronics, including project titles, prices in Indian rupees, and estimated completion times. It lists over 150 microcontroller and embedded systems projects focusing on areas such as home automation, security, industrial automation, GPS/GSM integration, and RFID applications. The projects range in price from 2,200 to 7,000 INR and can be completed within 2-3 days. Each completed project includes documentation, circuit diagrams, PCB layouts, embedded C code, and an assembly/working video. Free home delivery is also offered.
CLOUD BASED NETWORK MANAGEMENT AND CONTROL FOR BUILDING AUTOMATION
A Complete Home Automation Solution
With the usage of Cloud, Technology users can access devices with any Available Network.
Freedom to Control Appliances with a Smart Phone, chrome extension, 3G, or even 4G.
Freedom to control the Intensity of appliances.
The active feedback system displays energy usage and costs in real-time.
Remote notice board implementation using gsm communication
This document describes a remote notice board implementation using GSM communication. The system uses an 8051-based microcontroller interfaced with a GSM modem and LCD to display messages sent via SMS. It allows users to remotely change display messages in real-time. When an SMS is received, the microcontroller updates the LCD according to the message. The system provides low-cost, automated operation with low power consumption for remote advertisement displays.
multiple input control by sms using GSM technology
This document presents a project to develop a home appliance control system using a microcontroller, GSM network, and SMS messages. The system aims to allow remote control of appliances in a cheap and simple way compared to existing wireless solutions. The major components are an AT89S52 microcontroller, GSM modem, relay circuits, and interfaces to appliances. The microcontroller communicates with the GSM modem via a serial interface to send and receive SMS commands to control relays and appliances from a remote cell phone. The system is designed for applications like appliance control, security systems, and home entertainment control from outside the home.
Home Automation using NodeMCU .docx
The main objective of this project is to develop a home automation system using an Arduino board with Bluetooth being remotely controlled by any Android OS Smartphone. Modern houses are gradually shifting from conventional switches to centralized control system, involving remote controlled switches
ELECTRONIC PROTECTION FOR EXAM PAPER LEAKAGE
At Softroniics we provide job oriented training for freshers in IT sector. We are Pioneers in all leading technologies like Android, Java, .NET, PHP, Python, Embedded Systems, Matlab, NS2, VLSI etc. We are specializiling in technologies like Big Data, Cloud Computing, Internet Of Things (iOT), Data Mining, Networking, Information Security, Image Processing, Mechanical, Automobile automation and many other. We are providing long term and short term internship also.
We are providing short term in industrial training, internship and inplant training for Btech/Bsc/MCA/MTech students. Attached is the list of Topics for Mechanical, Automobile and Mechatronics areas.
MD MANIKANDAN-9037291113,04954021113
softroniics@gmail.com
www.softroniics.com
Agriculture field motor control system by using Global System for Mobile comm...
Agriculture field motor control system by using Global System for Mobile communication .It is used for controlling agriculture field motor along with Micro Controller. And is a Embedded system based project
Project ppt
This document summarizes a student project to design a highly secured automatic door control and power control system. The system uses a PIC microcontroller to control components like a PIR sensor for motion detection, door sensors, call buttons, relays for light/fan control, and a GSM modem for communication. It allows for automated and remote control of doors and electric appliances with features like gas leakage detection for security. The project aims to provide low-cost security and automation for homes and offices with benefits like remote access and power savings. Future work may include expanding the gas detection and power control capabilities.
More Related Content
What's hot
Literature survey
This document summarizes several home automation and security systems proposed in previous research papers. It describes systems that use password protected door locks, car theft prevention that disconnects the ignition, home security using web cameras or SMS to detect intruders, a wireless sensor network and GSM based system to detect intrusion and fires remotely, and a low cost system that can operate in internal or external modes to detect security issues and notify users or emergency services. The systems aim to automate tasks and increase security and safety in homes and vehicles.
Implementation of Home Security System using GSM module and Microcontroller
Home security systems use wireless technology like GSM to monitor doors and appliances and send SMS alerts. A system uses magnets on doors connected to relays, which trigger LED lights and activate a GSM chip to send SMS messages to a stored phone number if the magnet connection is broken or restored, as controlled by code on a microcontroller. GSM is a widely used global standard for mobile communication that allows roaming between networks.
Keypad Based Bank Locker Security System Using Gsm Technology
Banking is one of the sectors where technology and advancements in technologies have not been utilized to the fullest potential. In the security systems even today very old practices are followed that can be made lot better using technologies like GSM which is easily usable and also easy to implement at a consumer level. In this project we propose a GSM based secure access which can provide a sophisticated theft alert system for bank locker system. This system contains microcontroller, keypad, GSM module and LCD display. By using keypad we need to enter the password that is provided to the authenticated persons. If the password entered is wrong then the GSM network converts the digital information into airborne signals and SMS is transferred to the registered mobile number. This system offers better solution for the bank security system and it will also help us to track the person who tried to open the locker without the permission and proper authentication.
Group-3
This presentation summarizes a student project on developing a home automation and security system using GSM technology. It was prepared by three students for their department supervisor. The presentation outlines the objectives, which are to develop a wireless home automation system using GSM to remotely monitor and control devices. It describes the basic working of the system with a microcontroller receiving SMS commands from a mobile phone to operate devices. The hardware and software components used are also summarized, along with the advantages of flexibility, security and power savings enabled by the remote control functionality.
Gsm based home automation
This presentation is based on the controlling of home appliances using simple commands. The key components are a SIM 300 GSM module, an Arduino UNO board and a 4 channel 12 volt relay.
Microcontroller based smart home with security using gsm technology
Abstract Smart home is a house that uses information technology to monitor the environment, control the electric appliance and communicates with the outer world. Smart home is a complex technology, at the same time it is developing. A smart home automation system has been developed to automatically achieve some activities performed frequently in daily life to obtain more comfortable and easier life environment. Security has becoming an important issue everywhere. Home security is becoming necessary nowadays as the possibilities of intrusion are increasing day by day. Safety from theft, and fire are the most important requirements of home security system for people. A traditional home security system gives the signals in terms of alarm. With the help of technology development, this research take a chance to implement these technologies to help people to protect and control their home appliance remotely .The purpose of this research is to create a system that make the surveillance of home devices easily. The technology that used in this research are GSM (Global System for digital mobile telecommunication ) and Microcontroller .The GSM module is used to communicate with the owner of the home whenever the sensor senses a fault , a specific message is sent to the owner in order to take a necessary action . The microcontroller is a tool that use a specific code to do some functions by using MikroC programmer. This project controls and monitors temperature, smoke, intrusion motion, magnetic lock door, garage door and irrigation. This project is expected to achieve, safety, save effort, save time, and easy devices control Keywords: Smart home, GSM module, magnetic lock, microcontroller
SMS(GSM)BASED HOME AUTOMATION SYSTEM PROJECTS-ECE/EEE/E&I/ICE
The document discusses using a GSM-based system to remotely control home and industrial appliances from anywhere via mobile phone. GSM is a digital cellular network available globally that also enables digital data services. The project uses sensors to detect abnormalities and send alerts to a user's phone via a GSM modem connected to a microcontroller. The user can also send SMS messages to control devices connected to the system, like lights or fans, and receive a response about their status.
gsm based home automation
The document describes a home appliance control system based on GSM network technology that allows users to remotely control appliances via SMS. A microcontroller receives SMS commands and uses a relay circuit to operate appliances. Key advantages are ubiquitous access, wireless operation for adaptability and cost-effectiveness, and power conservation. Limitations include the receiver needing a constant power supply and cellular signal to operate connected devices.
Code modulation based encryption & descryption technique for secure communica...
This document describes a code modulation based encryption and decryption technique for secure wireless communication. The system has a transmitter section and receiver section, each designed around a microcontroller. The transmitter encrypts data entered into a PC and sends it via RF to the receiver. The receiver decodes the encrypted data and displays it on a PC. To view the actual data, a password must be entered which decrypts the cipher text into plaintext. Block diagrams show the components in the transmitter including an encoder, microcontroller, and RF transmitter, and in the receiver including a decoder, microcontroller, and RF receiver.
Home automation and Digital notice board using android app
This document describes a home automation system using an LPC2148 microcontroller, GSM modem, relays, and an Android application. The system allows users to control appliances and view a digital notice board remotely using the Android app via GSM. The LPC2148 microcontroller interfaces with the GSM modem to receive control messages and trigger relays to operate appliances. The system provides a low-cost, flexible, and secure remote automation solution.
Industrial automation using gsm (ppt)
This document proposes a GSM-based industrial automation system that uses a PSoC microcontroller to monitor and control industrial devices via SMS commands sent from a mobile phone. Sensors detect process variables and relay switches control devices. The GSM modem provides wireless communication between the system and maintenance officers who can remotely monitor sensors and control machinery from anywhere using their mobile phones. This low-cost solution aims to reduce maintenance costs and optimize critical monitoring compared to existing wired, wireless, and RF-based systems.
smart Home security
This document describes a smart home security system that uses wireless sensor networks and GSM technology. The system can detect theft, gas leaks, temperature changes and send alarm messages to a mobile phone. It allows users to control home appliances like fans and lights remotely. The system uses low-cost and commonly available components like cell phones, SIM cards, and GSM modems. Sensors for smoke, LPG, temperature, and motion can trigger alarm messages. The system has applications for home, locker, industrial and bank security.
Home automation
This document describes a Zigbee-based home automation system that provides centralized wireless control of building devices. The system uses an LPC2148 microcontroller to monitor sensors like IR, smoke, light, temperature, and control appliances through a relay. Zigbee is used for wireless communication between devices as it consumes low power and supports up to 64k nodes. The system allows remote monitoring of building parameters and automation of devices to save time and energy compared to manual control. Potential applications include home, office, and industrial appliance automation and control.
Ppt
This document describes a remote home security system using a wireless sensor network and GSM technology. The system aims to detect theft, gas leaks, and temperature changes and send alarm messages remotely. It uses an ARM or AT89S52 controller, GSM module, smoke sensor, LPG sensor, temperature/PIR sensor, infrared sensor, LCD, and MAX232 IC. The system's block diagram shows sensors connecting to an embedded controller that communicates via GSM to authorized mobile phones. It allows monitoring a home security system remotely.
New projects list
This document provides details about electronics projects available from Easy Electronics, including project titles, prices in Indian rupees, and estimated completion times. It lists over 150 microcontroller and embedded systems projects focusing on areas such as home automation, security, industrial automation, GPS/GSM integration, and RFID applications. The projects range in price from 2,200 to 7,000 INR and can be completed within 2-3 days. Each completed project includes documentation, circuit diagrams, PCB layouts, embedded C code, and an assembly/working video. Free home delivery is also offered.
CLOUD BASED NETWORK MANAGEMENT AND CONTROL FOR BUILDING AUTOMATION
A Complete Home Automation Solution
With the usage of Cloud, Technology users can access devices with any Available Network.
Freedom to Control Appliances with a Smart Phone, chrome extension, 3G, or even 4G.
Freedom to control the Intensity of appliances.
The active feedback system displays energy usage and costs in real-time.
What's hot (16)
Implementation of Home Security System using GSM module and Microcontroller
Implementation of Home Security System using GSM module and Microcontroller
Keypad Based Bank Locker Security System Using Gsm Technology
Keypad Based Bank Locker Security System Using Gsm Technology
Microcontroller based smart home with security using gsm technology
Microcontroller based smart home with security using gsm technology
SMS(GSM)BASED HOME AUTOMATION SYSTEM PROJECTS-ECE/EEE/E&I/ICE
SMS(GSM)BASED HOME AUTOMATION SYSTEM PROJECTS-ECE/EEE/E&I/ICE
Code modulation based encryption & descryption technique for secure communica...
Code modulation based encryption & descryption technique for secure communica...
Home automation and Digital notice board using android app
Home automation and Digital notice board using android app
CLOUD BASED NETWORK MANAGEMENT AND CONTROL FOR BUILDING AUTOMATION
CLOUD BASED NETWORK MANAGEMENT AND CONTROL FOR BUILDING AUTOMATION
Similar to Password operated device control using mobile communication
Remote notice board implementation using gsm communication
This document describes a remote notice board implementation using GSM communication. The system uses an 8051-based microcontroller interfaced with a GSM modem and LCD to display messages sent via SMS. It allows users to remotely change display messages in real-time. When an SMS is received, the microcontroller updates the LCD according to the message. The system provides low-cost, automated operation with low power consumption for remote advertisement displays.
multiple input control by sms using GSM technology
This document presents a project to develop a home appliance control system using a microcontroller, GSM network, and SMS messages. The system aims to allow remote control of appliances in a cheap and simple way compared to existing wireless solutions. The major components are an AT89S52 microcontroller, GSM modem, relay circuits, and interfaces to appliances. The microcontroller communicates with the GSM modem via a serial interface to send and receive SMS commands to control relays and appliances from a remote cell phone. The system is designed for applications like appliance control, security systems, and home entertainment control from outside the home.
Home Automation using NodeMCU .docx
The main objective of this project is to develop a home automation system using an Arduino board with Bluetooth being remotely controlled by any Android OS Smartphone. Modern houses are gradually shifting from conventional switches to centralized control system, involving remote controlled switches
ELECTRONIC PROTECTION FOR EXAM PAPER LEAKAGE
At Softroniics we provide job oriented training for freshers in IT sector. We are Pioneers in all leading technologies like Android, Java, .NET, PHP, Python, Embedded Systems, Matlab, NS2, VLSI etc. We are specializiling in technologies like Big Data, Cloud Computing, Internet Of Things (iOT), Data Mining, Networking, Information Security, Image Processing, Mechanical, Automobile automation and many other. We are providing long term and short term internship also.
We are providing short term in industrial training, internship and inplant training for Btech/Bsc/MCA/MTech students. Attached is the list of Topics for Mechanical, Automobile and Mechatronics areas.
MD MANIKANDAN-9037291113,04954021113
softroniics@gmail.com
www.softroniics.com
Agriculture field motor control system by using Global System for Mobile comm...
Agriculture field motor control system by using Global System for Mobile communication .It is used for controlling agriculture field motor along with Micro Controller. And is a Embedded system based project
Project ppt
This document summarizes a student project to design a highly secured automatic door control and power control system. The system uses a PIC microcontroller to control components like a PIR sensor for motion detection, door sensors, call buttons, relays for light/fan control, and a GSM modem for communication. It allows for automated and remote control of doors and electric appliances with features like gas leakage detection for security. The project aims to provide low-cost security and automation for homes and offices with benefits like remote access and power savings. Future work may include expanding the gas detection and power control capabilities.
Eprojectprojectfinalreportgsmmonitoringcontrollingofdevicesusinggsm 090811012...
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a GSM transmitter and receiver along with a microcontroller. Users can send SMS messages to turn devices on or off, check statuses, and receive notifications. The system provides advantages like remote monitoring and control. Potential applications include home, office, and industrial automation as well as agricultural equipment control and security systems.
substation monitoring and control system
system of operation and control of grid system which is controlled by a bluetooth and gprs. Design for a project to the electrical department.
Paper id 24201457
This document describes a wireless SCADA system for industrial automation using M2M communication. The system uses various sensors to measure parameters like temperature, humidity, light, and LPG. An ADC converts the analog sensor readings to digital values, which a microcontroller processes and sends via GSM to a remote computer. The system allows monitoring and controlling industrial processes from anywhere via the internet. It aims to provide low-cost, low-power automation without distance barriers compared to traditional SCADAs. Future work may add switches/routers for networking and wireless cameras to improve security and monitoring capabilities.
accident detection tech seminar ppt.pptx
This document describes a mini project on a GSM based home automation system. The key components of the system include an Arduino Uno, GSM module, relay, LCD display, and mobile phone. The system allows users to remotely switch household appliances on and off using the GSM module and Arduino. It provides a low cost and reliable way to automate and control appliances in the home from a mobile phone.
Dtmf based device control
This document describes a system to control devices wirelessly using DTMF technology. An 8051 microcontroller is interfaced with relays and loads to control industrial or home devices. A mobile phone acts as a remote control by establishing a call and pressing keys that generate DTMF tones detected by a decoder. The keys are mapped to control the relays and devices. A power supply regulates voltage for the system. Applications include industrial and domestic device control from a mobile phone remotely.
Touch screen mobile phone
GSM is a digital mobile telephone system that uses TDMA and is widely used globally. It allows for cellular communication and the evolution of wireless mobile telecommunication. This document discusses using a GSM and microcontroller-based embedded system to make calls and send SMS messages remotely. It also describes a touch screen mobile phone interface design study and various components in a block diagram for a GSM mobile phone system, including an AVR microcontroller, LCD display, touch screen, and power supply unit.
Monitoring & Controlling of Devices using GSM
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a microcontroller to receive SMS commands from a mobile phone via a GSM modem and control devices connected to relays. It allows devices like fans and lamps to be turned on and off from a distance. The system provides advantages like remote control from anywhere using basic phone operation and potential applications in home, office, and industrial automation.
Smart Home Automation
The home automation becomes important, because it gives the user the comfortable and easily for using the home devices. The implementation and design of wireless home automation control used two methods, WLAN technology and RF remote control handheld to control of the selective home devices with integral security and protected system. The system is low cost and flexible with the increasing variety of devices to be controlled.
fault monitring system
This document summarizes a student project on a GSM-based fault monitoring system for cell phone towers. The system uses a GSM modem and microcontroller to detect faults and send SMS alerts to supervisors. It allows remote monitoring of power grids and industries without needing on-site staff. The project aims to design an indication system for overvoltage and over-current faults. Key components are a GSM modem to connect to the mobile network and an 89S51 microcontroller. The system provides long-life, low-cost monitoring without maintenance through SMS alerts. It has applications for power grids, factories, and home automation.
IOT BASED RFID SMART DOOR LOCK SYSTEM USING NODE MCU - MAJOR.pptx
IOT BASED RFID SMART DOOR LOCK SYSTEM USING NODE MCU - MAJOR.pptxMaulana Abul Kalam Azad University of Technology
This project is intended for construction of a Smart Fingerprint based Door Lock System, by using R307 finger print reader optical sensor module attendance scanner. The project based on the Arduino Uno/Node MCU is used for the desired purpose. A standalone module is a machine which can automatically perform tasks. 12C OLED Display Module set in front of the gate and shows the data about who is check-in with a proper ID. The fingerprint sensor detects the finger ID and give access to the 12V Solenoid lock to open the door.
The project also includes Blynk IoT app which provides the remotely controlled accessed for the whole project using Wi-Fi connectivity.land rover robot control using GSM technology
This document presents a project on a land rover robot that uses GSM technology to control the robot remotely. A group of 5 students developed the robot under the guidance of faculty. The robot uses a microcontroller, GSM modem, motors and other components. The robot can be controlled remotely by sending text messages to move forward, backward, left or right. The document describes the components, working, advantages, applications and future scope of the remote controlled robot.
Tv remote controlled pc and devices with password protection
This document describes a system to control a computer and connected electrical devices using a TV remote in a secure way with password protection. The system uses an IR receiver to receive signals from the remote and a microcontroller processes the signals and sends commands to control applications running on the computer via serial communication. The remote allows users to control software like media players and browsers from a distance as a more convenient alternative to using a mouse.
Iirdem implementation of smart homes and industrial automation system with se...
The document proposes a smart home and industrial automation system that allows users to control appliances remotely using a mobile application over GSM networks. The system uses a PIC microcontroller connected to appliances via relays and optocouplers. An Android application is developed using Eclipse that sends encrypted control signals as SMS messages. Security involves password protection, user identification, and encrypted communications. The system was simulated in Proteus and allows monitoring and control of devices from a mobile phone.
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM ...
The main aim of this project is to develop a system based on Embedded microcontroller ,which is used for controlling electrical appliances in home or industry and fire detection using GSM.
Similar to Password operated device control using mobile communication (20)
Remote notice board implementation using gsm communication
Remote notice board implementation using gsm communication
multiple input control by sms using GSM technology
multiple input control by sms using GSM technology
Agriculture field motor control system by using Global System for Mobile comm...
Agriculture field motor control system by using Global System for Mobile comm...
Eprojectprojectfinalreportgsmmonitoringcontrollingofdevicesusinggsm 090811012...
Eprojectprojectfinalreportgsmmonitoringcontrollingofdevicesusinggsm 090811012...
IOT BASED RFID SMART DOOR LOCK SYSTEM USING NODE MCU - MAJOR.pptx
IOT BASED RFID SMART DOOR LOCK SYSTEM USING NODE MCU - MAJOR.pptx
Tv remote controlled pc and devices with password protection
Tv remote controlled pc and devices with password protection
Iirdem implementation of smart homes and industrial automation system with se...
Iirdem implementation of smart homes and industrial automation system with se...
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM ...
FIRE DETECTION AND ELETRICAL POWER ON/OFF CONTROL IN HOME/INDUSTRY USING GSM ...
Recently uploaded
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Aberdeen
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Recently uploaded (20)
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
What is Digital Literacy? A guest blog from Andy McLaughlin, University of Ab...
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Password operated device control using mobile communication
- 1. Embedded systems Ph:7842522786 9948887244 Password operated device Control using mobile communication ABSTRACT AIM: The main objective of this project is we are going to develop an embedded system, which will control all the devices with command (password) from a Remote device (our mobile) through GSM communication. IMPLEMENTATION: This project is implemented on 8051 based At89s52 developed board interfaced with GSM modem, relay of connecting the devices, LCD for displaying the data. BLOCK DIAGRAM: GSM MODEM LCD 16×2 MAX 232 RELAY 1 RPS skesystems@gmail.com Vijayawada MICROCONTROLLER AT89S52 Hyderabad Page 1
- 2. Embedded systems Ph:7842522786 9948887244 Indication led RELAY 2 Indication led POWER SUPPLY: Step Down Bridge Filter Transformer Rectifier Circuit Regulator section DESCRIPTION: skesystems@gmail.com Vijayawada Hyderabad Page 2
- 3. Embedded systems Ph:7842522786 9948887244 Controlling of light, climate, doors and window shutters and many more which we can control manually in our daily life. Anybody can do controlling of devices. But here the thing is controlling devices is restricted to particular persons who are provided with the password. The persons who know the password only can control the devices by sending password as message. In this project we are using at89s52 microcontroller for controlling the equipments in the home. GSM modem is used to communicate and respond to the remote commands and those commands are sent to the the micro controller via RS 232 communication means MAX232 chip. This automation system can also be used for industrial applications with small modifications. SOFTWARE: Embedded ‘C’ RIDE to write code ISP to burn the chip HARDWARE: At89s52 based our own developed board Power Supply GSM module RELAY ADVANTAGES: Low cost, automated operation, Low Power consumption. skesystems@gmail.com Vijayawada Hyderabad Page 3
- 4. Embedded systems Ph:7842522786 9948887244 REFERENCES 1. The 8051 micro controller and embedded systems by Mazidi. 2. www.wikipedia.org 3. WWW.atmel.com 4. www.8051projects.com 5. Embedded systems with 8051 by kenith j ayala skesystems@gmail.com Vijayawada Hyderabad Page 4