PAMLINE

Since life springs from water, we capitalise on the experience
gained from our 150 year partnership with water
World leader in complete ductile cast iron pipeline systems, SAINT-GOBAIN PAM designs,
produces and sells a complete range of solutions dedicated to the transport of water.
Throughout the world, we meet the requirements of our customers with the depth of our
expertise based on the alliance between tradition and modernity, the technical and
logistics quality of our products and services driven by our determination to innovate.
SAINT-GOBAIN PAM represents the Pipeline Activity of the SAINT-GOBAIN Group.
Present in every continent and with sites in twenty countries, SAINT-GOBAIN PAM
federates a group of industrial and commercial units (e.g. PONT-A-MOUSSON S.A.)
Brief Introduction

Key data - 2013
Management Team - Pipe Activity
Claude IMAUVEN
Senior Vice-President, Saint-Gobain,
President, Construction Products Sector,
Chairman and Chief Executive Officer,
Saint-Gobain PAM.
Vincent LEGROS
President of the Pipe Activity,
Chief Operating Officer, Saint-Gobain PAM,
Managing Director of the Water and
Sewage Business Unit.
Laurent Huw BLONDEAU
Deputy Managing Director, Saint-
Gobain PAM,
Director of the Fittings Business Unit.
Jean-Claude LASSERRE
Director of the Valves Business Unit,
Commercial Director for Europe
Bruno GARD
Director of the Soil & Drain Business
Unit.
Burkhard SCHMOLCK
Director of the Municipal Casting Business,
Managing Director, Saint-Gobain PAM
Deutschland.
Georges BANCON
Research and Development Director,
Technical Director.
Dominique LORANG
Director of Finance, Management
Control and Supply Chain.
Thierry PRECHEUR
International Commercial Director.

History
A few Reminders..
Founded in 1856, active for more than a century in Europe and from 1937 in South
America, SAINT-GOBAIN CANALISATION extended its international presence to Asia in
1997, then to South Africa in 1998.

History
Key dates..
The first cast iron pipe leaves the production lines of the Pont-à-
Mousson plant. In an innovative move, the company focuses its
development on the emergence of an emblematic product: the
cast iron pipe dedicated to water supply.
Success in overseas markets shapes the company's strategic
growth. From the end of the 19th century, the Pont-à-Mousson
site equipped numerous towns with water networks, both in
Europe and throughout the world.
1866
With the creation of the Société Anonyme des Hauts-Fourneaux
et Fonderies de Pont-à-Mousson, the company forges its true
identity, asserting its core business: foundry.
Two major technical innovations establish the company's
performance in this field.

History
Key dates..
The centrifugal casting process, faster and more regular, takes
over from vertical casting in the manufacture of pipelines,
contributing to the ease of mass production1928

History
Key dates..
The use of ductile cast iron, offering a very high yield strength
together with high tensile strength and impact strength,
becomes more widespread1948

History
Key dates..
Modernisation of the installations, processes and products
continues:
Automation of the foundry lines improves working conditions
and implifies the production steps,
Generalisation of the zinc coating increases product durability,
Use of elastomer joints, leakproof and flexible, represents a
determining safety factor for the pipeline systems
1960

History
Key dates..
The production methods undergo a series of decisive
improvements:
All pipelines produced at the Pont-à-Mousson plant are made
from ductile cast iron,
The manufacture of municipal castings represents the ideal
solution to satisfy the requirements of the sewerage system
operators,
Pont-à-Mousson S.A., a group of several industrial companies in
France, Germany and Brazil, merges with SAINT-GOBAIN in 1970
The SAINT-GOBAIN Group now has a PIPELINE Division and
launches its international development.
1970

History
Key dates..
International deployment of the PIPELINE Division intensifies,
especially in Spain and Great Britain. The strategic priority of the
PIPELINE Division is to refocus activity on its original trade:
complete, reliable solutions for the water cycle. The range of
production tools expands with the implementation of new
processes:
The V-Process : an advanced vacuum casting technique,
Cataphoresis: electrolytic processing which increases the
resistance to ageing, Lost-Foam: a casting technique in which the
polystyrene mould is replaced by the cast part. Innovative
coatings (polyethylene, polyurethane, epoxy powder coating)
are applied to the complete pipeline systems, depending on the
corrosive nature of the environments,
New product lines are launched:
The Integral range: a reference pipeline system for the sewerage
industry, The Euro 20 range: valves intended for the water cycle
markets.
1980

History
Key dates..
Development of the first locked connections.
1990

History
Key dates..
The change of corporate name of all companies in the PIPELINE
Activity strengthens the international cohesion of the SAINT-
GOBAIN Group. The determination to federate these companies
around a common identity gives SAINT-GOBAIN CANALISATION
greater worldwide status:
Pont-à-Mousson S.A. therefore becomes SAINT-GOBAIN PAM,
Numerous product innovations accompany the launch of the
ranges:
Natural: pipeline system offering exceptional corrosion
resistance for potable water supply,
Pluvial: runoff water evacuation pipeline system for sewerage,
Pamrex and Aksess: manhole covers for municipal castings,
EPAMS system: Syphonic rainwater drainage system for the
building industry.
2000

History
Key dates..
PAM: A common global brand.
Reflecting the federation under a common banner of the
companies in the SAINT-GOBAIN Group PIPELINE Activity, PAM
becomes the unique trade name of SAINT-GOBAIN
CANALISATION internationally.
Faithful to its industrial history combining tradition and
modernity, the PAM brand is now stamped on all our pipeline
products throughout the world, further increasing their
reputation.
Easily identifiable, PAM meets the requirements of market
globalisation whilst improving the coherence of the SAINT-
GOBAIN CANALISATION product and service offered.
2001

History
Key dates..
Launch of the TAG 32 range - DN 150 to 300.
TAG 32 is a new generation range in ductile iron, designed to fit
to the sewerage gravity requirements. This new range benefits
of the new coatings in accordance withe the natural
environment.
2004

History
Key dates..
Expansion of the NATURAL range from DN 350 to DN 600.
NATURAL : ductile iron pipe systèms with patented external
anticorrosion coating for drinking water conveyance. A complete
range of fittings allows every type of layouts and posing contexts
for the DN 60 to 600.
Launch of the IRRIGAL range from DN 100 to DN 1000.
IRRIGAL is the green pipe in ductile iron for irrigation pipelines
(green for DN 100 to 600 and black for DN 700 to 1000). A
complete system which improves the agricultural yield, by
improving the transport efficiency and by offering the best
performance of its field.
2004

History
Key dates..
A new range and system for the municipal casting :
Marketing of the "LINEA SLOT" for the municipal casting. A
complete system of slotted gullies adapted to your drainage
projects for pluvial waters, Introduction of the "IVOIRE" system.
IVOIRE is an identifying microship system RFID (radio frequency)
to make the communication between the municipal casting
products possible.
Presentation of large range of lockings for pipes and fittings.
Always adapting to the market needs, the Activity Canalisation
of Saint-Gobain offers a large panel of lockings answering to any
technical constraint.
2006

History
Key dates..
Renewal of the "EURO 20".
EURO 20, still more performant. The new gate keeps all the
previous advantages and presents higher performances :
diminution of the operating torque, a new conception of its leak
tigthness makes it stable through time.
Accessories range simplified and completed.
2007

Business
Everywhere across the globe, man needs water to survive.
SAINT-GOBAIN CANALISATION, an industrial and commercial organisation, with more than
12 000 employees and over 30 000 product references, provides its expertise in the water
cycle markets to propose complete solutions for water transport, which are perfectly
adapted to the environment.
The SAINT-GOBAIN GROUP PIPELINE Activity, an industrial organisation composed of
production and commercialisation units, operates on the water cycle markets.
Its business consists in designing, manufacturing and delivering commercial solutions:
* Complete ductile cast iron pipeline systems for the potable water and sewerage markets (pipes, fittings, valves and accessories)
* Pipeline systems for the industrial main circuits: pressurised water networks, wastewater discharge, cooling circuits and compressed
air circuits
* Pipeline systems for firefighting (pipes, fittings and valves certified FM, fire hydrants)
* Complete ranges of valves, hydrants and coupling parts to construct water, sewerage, firefighting and irrigation networks
* Complete cast iron pipeline systems for the building markets (wastewater and rainwater evacuation)
* Ductile cast iron municipal castings

Ductile Cast Iron
Productmanufacturingprocesses..

Ductile Cast Iron
PAM ductile cast iron - HISTORY
The resistance and durability of grey cast iron - a material used before the arrival of ductile
cast iron - have been widely accepted.
In 1664, King Louis XIV ordered the construction of a network of pipes made from grey cast
iron, designed to carry water from the pumping station of Marly-sur-Seine to the fountains
and town of Versailles. These pipes remained in use for over 330 years.
Microscopic analysis of grey cast iron has shown that the carbon crystallises as long,
narrow graphite flakes.
They favour the concentration of stresses, potential sources of incipient cracks when the
material is subject to tractive forces.
1943 witnessed a major discovery: if a small amount of magnesium is added to the grey
cast iron, the carbon no longer crystallises as flakes but as graphite spheres.

Ductile Cast Iron
PAM ductile cast iron - HISTORY
A new material is born: ductile cast iron Spheroidal graphite gives the cast iron exceptional
mechanical properties.
In addition to excellent yield strength, it offers excellent tensile strength and impact
strength.
These qualities are an essential feature of potable water and sewerage networks.
A bar of twisted ductile cast iron displaying outstanding properties was imported from the
United States in 1949 by Jean Cavallier, a member of the family which founded the Pont-à-
Mousson company.
The ductilisation of cast iron reached the industrial stage in 1960.
For over 40 years, SAINT-GOBAIN CANALISATION ductile cast iron pipelines have enjoyed a
world-wide reputation for their strength, durability and reliability.

Ductile Cast Iron
PAM ductile cast iron – Mechanical Properties
Ductile cast iron is an iron/carbon/silicon alloy containing pure carbon, as spheroidal
graphite.
In ductile cast iron, the graphite particles consist of spheres, which prevent the risks of
crack propagation. The material is ductile and strong. In grey cast iron, the carbon forms
graphite flakes. Main properties of ductile cast iron:
Resistance to breaking, Impact strength, High yield strength, High elongation,
Ductile cast iron retains the traditional qualities of cast iron due to the high carbon
content:
Compressive strength, Mouldability, Resistance to abrasion, Machinability, Fatigue strength
These characteristics are optimised at SAINT-GOBAIN CANALISATION through control of
the processes involved, chemical analysis of the cast iron and heat treatment.
PAM ductile cast iron products can withstand all types of incident occurring during transport, handling, installation
and operation: water hammer, frost, large depths of cover, heavy traffic, unstable ground, earthquakes, etc.

Ductile Cast Iron
PAM ductile cast iron – Mechanical Properties
SAINT-GOBAIN CANALISATION water pipeline pipes, fittings and accessories are
manufactured from ductile cast iron, in compliance with standard NF EN 545:
By agreement between the manufacturer and the customer, the 0.2 % proof stress (Rp 0.2)
can be measured. It must not be less than:
270 MPa when A ( 12 % for DN 40 to 1000, or ( 10 % for DN >1000
300 MPa in the other cases
The Brinell hardness must not exceed 230 HB for the pipes and 250 HB for the fittings and
accessories. For welded components, a higher Brinell hardness is permitted in the area
heated up during welding.

CATALOG
Pipes and fittings – Drinking Water (Natural)
The NATURAL range
DN 60 to 600
STANDARD push-in joint pipes
EXPRESS mechanical joint fittings
STANDARD push-in joint fittings
NATURAL the new generation blue iron
A complete pipe system for DN 60 to 600
Extension to DN 350 to 600
STANDARD Vi anchoring DN 350 to 600
NATURAL UNIVERSAL, NATURAL PUR
Conformity to EN 545:2010 & ISO 2531:2009

CATALOG
Pipes and fittings – Drinking Water (Natural)

CATALOG
Pipes and fittings – Drinking Water (Classic)
The CLASSIC range
DN 700 to 2000
STANDARD push-in joint pipes
EXPRESS mechanical joint &
STANDARD push-in joint fittings
STANDARD pipes and fittings DN 700 to 2000
with EXPRESS fittings DN 700 to 1200
the traditional range, proven through
experience
pipes, fittings and accessories for potable
and irrigation water, DN 700 to 2000
the robust, easy to lay and comprehensive
product range which provides a simple and
reliable solution for all site problems

CATALOG
Pipes and fittings – Drinking Water (Classic)

CATALOG
Pipes and fittings – Drinking Water (Standard)
The STANDARD TT range
DN 60 to 2000
STANDARD TT (PE) DN <= 600
STANDARD TT (PUX) DN >= 700
Reinforced external coatings
for special soil types
The complete range of pipes, fittings and joints
with thick passive external coatings for special
soil types (saline, acid, electric pollution, etc.)
TT pipes
DN 60 to 600 - TT pipes with external coextruded
black polyethylene coating (PE)
DN 700 to 2000 - TT pipes with external (sand
color) polyurethane coating (PUX)
TT fittings (DN 60 to 2000)
Epoxy power coated fittings

CATALOG

CATALOG
The STANDARD PUR range
DN 80 to 2000
STANDARD push-in joint pipes and fittings
Special internal coating for soft or
aggressive water
STANDARD pipes with internal polyurethane
coating and STANDARD epoxy-coated fittings to
transport soft and aggressive water
Inert internal coatings
A complete range of pipes, fittings and joints - DN
100 to 2000

CATALOG
Pipes and fittings – Drinking Water (Flange)
The Flange range
DN 40 to 2000
Flanged pipes and fittings
PN 10 - 16 - 25 - 40
Flanged pipes and fittings DN 40 to 2000 to equip
pipeline nodes on above ground networks in
treatment station or in factory
Standardised flanges PN 10, 16, 25 and 40 bar
according to diameters
Metal reinforced gaskets
Mobile flanges for fittings DN 40 to 600

CATALOG
Pipes and fittings – Drinking Water (Flange)

CATALOG
Pipes and fittings – Drinking Water (ISOPAM)
The ISOPAM range
DN 100 to 600
STANDARD push-in joint preinsulated
pipes and fittings for frost protection
STANDARD reinsulated pipes and fittings for
frost protection
The entire range of pipes, fittings and joints
from DN 100 to 600 equipped with thermal
insulation applied in the factory to protect
networks exposed to risks of freezing
The ease of cast iron assembly to built
insulated pipelines

CATALOG
Pipes and fittings – Drinking Water (ISOPAM)

CATALOG
Pipes and fittings – Drinking Water (ALPINAL)
The ALPINAL range
DN 80 to 500
Push-in joint pipes and fittings for high
pressure systems
ALPINAL : ductile iron pipeline system
for artificial snow
DN 80 to DN 500
Operating pressures up to 100 bar
Pipes and fittings with high-performance
locking systems
A range of special accessories for snow
gun supply networks

CATALOG
Pipes and fittings – Drinking Water (ALPINAL)

CATALOG
Pipes and fittings – Drinking Water (Blutop)

CATALOG
Pipes and fittings – Irrigation (IRRIGAL)
The IRRIGAL range
DN 100 to 1000
Flanged branch pipe STANDARD
Fittings with mechanical joints EXPRESS
IRRIGAL the green iron especially
dedicated to irrigation
Pipes, fittings and accessories from DN
100 to 1000
New multipurpose range suitable for all
soil types frequently encountered, ready
for use without soil surveys
Innovating coatings for even more
durability

CATALOG
Pipes and fittings – Irrigation (IRRIGAL)

CATALOG
Pipes and fittings – Irrigation (FLANGED)
FLANGED range
DN 40 to 2000
Flanged pipes and fittings
PN 10 - 16 - 25 - 40
Tuyaux et raccords à brides de DN 40 à
2000 pour l'équipement des nœuds de
canalisation sur les réseaux aériens en
station de traitement ou en usine
Brides normalisées PN 10, 16, 25 et 40
bar selon les diamètres
Garnitures de joint à armature
métallique
Brides orientables pour les raccords de
DN 40 à 600

CATALOG
Pipes and fittings – Irrigation (FLANGED)

CATALOG
Pipes and fittings – Irrigation (KLIKSO)
KLIKSO range
DN 63 to DN 225
Ductile cast iron fittings for pressure PVC-U or
PE tubes in compliance with standards:
EN 1452 - 1 to 7
and PrEN 12201 - 1 to 7
Fittings in compliance with standard EN
12842
Joint rings in compliance with standard EN
681.1
Products holding a Sanitary Compliance
Certificate (ACS)
Blue epoxy-coating deposited by cataphoresis
Fittings delivered with the gaskets pre-
assembled and protected by plugs
The fittings can be anchored by 1/4 turn
gland

CATALOG
Pipes and fittings – Irrigation (Hydrants)
Irrigation hydrants
PFA 16 bar

CATALOG
Pipes and fittings – Irrigation (Accessories )
Irrigation Accessories
PFA 16 bar

CATALOG
Pipes and fittings – Irrigation (Valves)
Valves with rubber gate
EURO 20
DN 40 to DN 400 range - PFA 10 and 16 bar

CATALOG
Pipes and fittings – Irrigation (Valves)
Valves with metal gate
Range DN 60 to DN 300- PFA 25 bar

CATALOG
Pipes and fittings – Sewerage (INTEGRAL)
INTEGRAL range
Gravity flow system and rising main
DN 80 to 2000
Pipes, fittings and accessories
Transport of effluents (pH 4 to 12) from the
homes to the treatment station.
ductile cast iron pipes and a complete range
of fittings and accessories especially
designed for gravity and rising
main sewerage systems
full compliance with standard EN 598
diameters 80 to 2000
The INTEGRAL system is recognised for its
quality and its performance
(rigid, non-deformable and perfectly
watertight)

CATALOG
INTEGRAL pH1 pipe
Gravity and pressure sewers
DN 80 to 2000
Pipes and fittings for highly aggressive
effluents (low pH)
The aggravating factors, the types of
effluents:
the effluent aggressiveness levels tolerated
in the public sewerage networks are laid
down by law
2 factors, however, are likely to reduce the
lifetime of the installations
the aggressiveness of some fluids
(especially industrial)
septic fermentation
INTEGRAL PH1 a range of sewerage pipes
and fittings designed to transport highly
aggressive effluents (low pH) and effluents
where septic fermentation is likely to take
place, DN 80 to DN 2000

CATALOG
INTEGRAL all purpose
range
DN 150 to 2000
Pipes and fittings for highly corrosive soils
and backfill
PUX pipes and epoxy-coated fittings from
DN 150 to DN 2000.
The external coating of the pipes consists of
sprayed-on polyurethane (sand colour)
the fittings (internal and external) have an
epoxy coating (brown red).
These coatings act as a screen between the
cast iron and the external environment,
completely isolating the pipeline from the
corrosive action of the soil.

CATALOG
INTEGRAL Preinsulated
range
DN 150 to 600
Pipes and fittings for frost protection
Considering the type of application, there
are no preinsulated fittings. After
consultation, however, certain models can
be produced.

CATALOG
Pipes and fittings – Sewerage (TAG)
TAG 32 range
Gravity flow system (domestic wastewater)
DN 150, 200, 250 and 300
Pipes and fittings
TAG 32, Saint-Gobain new pipe for gravity
flow systems is :
100 % solid (Rigidity Criterion 32)
100 % watertight
100 % straight (respect of the water
stream)
100 % recyclable
100 % durable
TAG 32, the cost-effective range, naturally

CATALOG
Pipes and fittings – Sewerage (PLUVIAL)
The PLUVIAL range
DN 350 to 2000
Pipe sand fittings for rainwater collection SAINT-GOBAIN CANALISATION offers a
complete system of NF PAM-PLUVIAL mark
pipelines for rainwater collection.

CATALOG
Pipes and fittings – Industry (ALPINAL)
ALPINAL range
DN 80 to 300
High pressure pipes and fittings for snow
guns
Double chamber ALPINAL pipes and fittings
with Tyton gasket for self-restrained
pipelines used under very high pressures,
from DN 80 to 300
Operating pressures up to 100 bar
Pipes and fittings with UNIVERSAL Ve high-
performance locking systems
A range of special accessories for snow gun
supply networks

CATALOG
Pipes and fittings – Industry (ISOPAM)
The ISOPAM range for
industry
DN 100 to 600
STANDARD push-in joint preinsulated pipes
and fittings
STANDARD preinsulated pipes and fittings
for protection against frost
The entire range of pipes, fittings and joints
from DN 100 to 600 equipped with thermal
insulation applied in the factory to protect
networks exposed to risks of freezing
The ease of cast iron assembly to built
insulated pipelines

CATALOG
Pipes and fittings – Industry (FLANGED)
FLANGED range
DN 40 to 2000
FLANGED joint pipes and fittings

CATALOG
Pipes and fittings – Industry (FM)
< FM > range
DN 60 to 300
approved pipes and fittings used on
industrial firefighting networks
Please contact us for all products (pipes,
fittings, joints) range FM

CATALOG
Connecting Pieces & other fittings – Pipe Flange junctions
Cast Iron - Pipe-flange junction for cast iron pipe
Used to join a cast iron pipe spigot to a flange
PVC - Pipe-flange junction for PVC pipe
To connect a PVC pipe spigot to a flange
PE - Pipe-flange junction for PE
To connect a PE pipe spigot to a flange
Others - Pipe-flange junction for various materials
To connect a pipe spigot made from grey iron, steel, asbestos-cement, etc. to a flange

CATALOG
Connecting Pieces & other fittings – Pipe Pipe junctions
Cast Iron - Pipe-pipe junction for cast iron pipe
To connect two cast iron pipe spigots
PVC - Pipe-pipe junction for PVC tube
To connect two PVC tube spigots
PE - Pipe-pipe junction for PE tube
To connect two PE tube spigots
Others - Pipe-pipe junction for other materials
To connect two spigots made from the same material, e.g. cast iron, steel or asbestos-
cement or two spigots made from different materials

CATALOG
Connecting Pieces & other fittings – Pipe repair
Repair sleeves - Pipe repairs using repair sleeves
For fast repairs of ductile cast iron, grey iron, PCV or steel pipes

CATALOG
Connecting Pieces & other fittings – Flanged fittings
PN 10 - Flanged fittings PN 10
DN 40 to 2000
Flanged fittings DN 40 to 2000 to equip pipeline nodes on above ground networks in
Standardised flanges PN 10

CATALOG

CATALOG
Connecting Pieces & other fittings – Fittings for plastic tubes
Ductile cast iron fittings for pressure PVC-U / PE tubes :
KLIKSO range
DN 63 to DN 225
Ductile cast iron fittings for pressure PVC-U or PE tubes in compliance with standards:
-EN 1452 - 1 to 7
-and PrEN 12201 - 1 to 7
Fittings in compliance with standard EN 12842
Joint rings in compliance with standard EN 681.1
Products holding a Sanitary Compliance Certificate (ACS)
Blue epoxy-coating deposited by cataphoresis
Fittings delivered with the gaskets pre-assembled and protected by plugs
The fittings can be anchored by 1/4 turn gland

CATALOG
Connecting Pieces & other fittings – Modular & Variably
Modular & variably angled KAMELEO range : an easier
way to create bends DN 80 - 100 - 150
an easier way to create bends

CATALOG
Valves – Water
Valves with rubber gate & Accessories
EURO 20 valves with rubber gate
DN 40 to DN 400 range - Allowable operating pressure (PFA) 10 and 16 bar
A complete range of ductile cast iron gate valves:
for connection to all pipe materials (cast iron, PE, PVC, etc.)
corrosion resistant with an epoxy coating of minimum thickness 250 µm on the internal and
external surfaces in standard version
the components in contact with potable water are foodstuff quality in compliance with
applicable regulations

CATALOG
Valves – Water
Accessories for gate valves with rubber gate

CATALOG
Valves – Water
Gate valves with metal gate & Accessories
Gate valve with metal gate
DN 60 to DN 300 range - Allowable operating pressure (PFA) 25 bar

CATALOG
Valves – Water
Flanged butterfly valves & Accessories
Flanged butterfly valves
DN 150 to 1200 - PFA 10, 16 and 25 bar

CATALOG
Valves – Water
Accessories for butterfly valves
Surface box units
Flange adapters
A complete range of flange adapters:
for connection to all types of materials
made from cast iron coated with epoxy or Rilsan, minimum thickness 250 µm
.
A range of flange adapters for sewerage is also available in the Sewerage heading of the
catalogue.

CATALOG
Valves – Water
Connection sleeves
A complete range of connection sleeves suitable for all types of material.
A range of sleeves for sewerage is also available in the Sewerage section of the catalogue.

CATALOG
Valves – Water
Repair sleeves
To repair porosities and cracks quickly on pipes made from various materials: grey iron,
ductile cast iron, steel or PVC.
Triple strip 3-jaw stainless steel sleeves for pipe outer diameters from 300 to 700 mm,
available in lengths 200, 300 and 500 mm: Please contact us

CATALOG
Valves – Water
Self restrained dismantling joints
DN 40 to 1200 - allowable operating pressure (PFA) 10, 16, 25 bar
The self restrained dismantling joints allow installation and removal of a flanged device
between two fixed pipeline components. Their sliding system provides a certain amount of
clearance to help remove the devices easily.

CATALOG
Valves – Water
Single and double air valves
Allowable operating pressure (PFA) 10, 16, 25 and 40 bar
Devices used to evacuate air from the pipelines

CATALOG
Valves – Water
Control valves
A complete range of control valves to regulate flow, pressure or level.
Our technicians can help you choose, design, implement and maintain these devices.
Please contact us.

CATALOG
Valves – Water
Valve and filters
Service connections
Accessories for service connections
Branch collars
Meter rail
Reservoir equipment

CATALOG
Valves – Sewerage
Shut-off valves
Double air valves
The double air valves protect the wastewater networks by evacuating the air trapped in the pipelines.
The air valve body is made from welded steel with epoxy coating (250 µm), the moving part is
completely plastic, guaranteeing excellent corrosion resistance.
Their use leads to savings during installation: the pipeline can follow the relief of the terrain, thereby
avoiding the extra costs involved when laying at greater depths (trench shoring, ground water lowering,
etc.) required to follow a regular pipeline profile.
Sewerage check valves

CATALOG
Valves – Fire safety
Pillar fire hydrants
DN 80, 100 and 150
A complete range of ductile cast iron freeze-proof pillar fire hydrants:
Their components in contact with potable water comply with applicable regulations and
have received a Sanitary Compliance Certificate issued by the Ministry of Health.
Compliance with standard NF S 61 213
Bearing the NF mark (apart from the new PLUS models)

CATALOG
Underground fire hydrants
Freeze-proof underground fire hydrant
Ductile cast iron independent case, class C 250 according to standard NF EN 124, with non-
skid patterns
Compliance with standard NF S 61 211

CATALOG
Accessories for pillar & underground fire hydrants
< FM > approved valves
EURO 20 of DN 100 to DN 300 - Types 21, 23, 24 and 25
Thanks to the performance of the PAM products and their safety margin, the EURO 20 valves, DN 40 to DN 300, types
21, 23, 24 and 25, have obtained FM approval.
These gates valves, which only close clockwise, require:
special assembly
special tests
special marking
according to FM specification class 1120-1130.
The FM approved EURO 20 gate vales can be equipped with:
an FM approved post indicator for gate valves installed on buried networks
an FM approved wall indicator for gate valves installed on above ground networks

CATALOG
Valves – Irrigation
Irrigation hydrants
PFA 16 bar
Used for distribution of pressurised water to several lots, perform the following functions:
- valve control
- metering
- pressure regulation / stabilisation
-flow limitation.
These functions are carried out by assembling various devices on the hydrant bodies.
A complete range of ductile cast iron irrigation hydrants offering:
- a wide selection of accessories to perform several functions: regulation , stabilisation, etc.
- good corrosion resistance with a polyurethane coating on the external surfaces.

CATALOG
Valves – Irrigation
Irrigation accessories
PFA 16 bar
Perform various functions, including:
- valve control
- metering
- pressure regulation and stabilisation
- flow limitation
Fitted on a hydrant body
This wide range of accessories offers good corrosion resistance with a polyurethane coating
on the external surfaces.

International Sales Network:
CONTACTS AND LOCATIONS

PAMLINE

Recommended

Recommended

More Related Content

Similar to PAMLINE

Similar to PAMLINE (20)

More from Debajyoti Karmakar

More from Debajyoti Karmakar (14)

PAMLINE