In the construction industry of today, all are faced with aggressive competition as the world slowly recovers from the economic and financial crises. At PPM we believe that our edge over the competition is offering cost-effective custom solutions individually tailored to best suit our clients needs.
In construction, the importance of planning and implementation of project controls are often overlooked. As a result, projects often suffer from huge deviations in original scope, agreed completion dates, budget over-runs and expensive claims. At PPM, we help our clients save money from the very beginning through implementing effective planning protocols from tender stage to developing baseline programmes to scheduling and reporting during the construction stages and at times forensic planning in the event of claims for extension of time.
We protect the interest of our clients through employing our well established risk management practices to mitigate possible risk events that could expose our clients or other stakeholders to delays, damages or claims. We ensure that our clients’ contemporaneous documents are well maintained should a claim ever arise, saving costs on specialist claim services and or prolongation costs.
We are offering BOQ preparation service for civil and interior packages. Request you to communicate for any scope through below mail id: immensequanticost@gmail.com
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
1. Quantity
Survey
(QS)
Services
In
Palembang
We
offer
a
complete
range
of
quantity
surveying
services
including
the
preparation
of
Bills
of
Quantities,
Employer’s
Requirements
and
other
tender
documentation
as
required
for
Design
&
Build,
Drawing
and
Specification
and
Traditional
Procurement
methods.
The
department
is
lead
by
chartered
quantity
surveyors
experienced
in
computer
assisted
methods
of
bill
production.
Bills
of
Quantities
are
generally
provided
in
accordance
with
construction
industry
standards
and
can
be
provided
in
printed
form
and/or
electronic
format
via
E-‐mail.
For
more
informations,
please
contact:
Email
:
edi@supriyanto.web.id
Mobile
:
+6281338718071
Kami
menawarkan
rangkaian
layanan
lengkap
quantity
survey
(QS)
termasuk
menyiapkan
Rencana
Anggaran
Biaya
(RAB),
spesifikasi
owner,
dokumen
tender,
sebagaimana
diperlukan
di
dalam
desain
dan
proses
pembangunan.
Departemen
kami
dipimpin
oleh
quantiry
surveyor
(QS)
yang
berpengalaman
dalam
pembuatan
bill
of
quantity
(BOQ).
Rencana
Anggaran
Biaya
(RAB)
biasanya
disiapkan
sesuai
dengan
standar
industri
konstruksi
dan
dapat
diberikan
dalam
bentuk
cetakan
(print
out)
dan
/
atau
format
elektronik
melalui
e-‐mail.
Untuk
informasi
lebih
lanjut,
silahkan
untuk
menghubungi
:
Email
:
edi@supriyanto.web.id
Mobile
:
+6281338718071
Tag : Palembang Quantity surveying, RAB,
BOQ,
bill
of
quantity,
Cost
Consultant,
calculation,
building,
construction,
jasa,
perhitungan,
Cost
Manager,
material,
harga,
biaya,
Cost
Engineering,
upah,
tenaga
kerja,
bangunan,
qs,
quantity
surveyor,
Palembang,
Cost
Management,