The document provides assembly instructions for building a Paint Aid, which attaches to a wheelchair to allow people to paint more easily. It lists the required materials and tools. The instructions include 27 steps to cut wood boards, attach them to metal pipes, add paper holders and ribbons for handles, and create a paint palette board. Diagrams are provided to help with assembly. The document also provides contact information for the design team.
This document provides step-by-step instructions for constructing double hung windows. It explains how to receive plans, make a cutting list, machine materials, construct frames, lay out sashes, cut mortises and tenons, and assemble components. Key steps include receiving plans, machining materials to size, constructing frames by gluing and screwing together head, sills, jambs and mullions, laying out and cutting mortises and tenons for sashes, and assembling sashes using mortise and tenon joints.
This study examines the cognitive load of bilingual and monolingual individuals when learning novel Chinese words. The researcher hypothesizes that adding a character-based language will produce memory problems only for monolinguals due to the higher cognitive load. Participants include English-Italian/Spanish bilinguals and English monolinguals who complete a task memorizing Chinese words and definitions. The researcher expects bilinguals to correctly recall more words due to their integrated language processing system enabling them to better manage the cognitive load of learning character-based words. Results will be analyzed to see if bilinguals overcome this high load task, indicating bilingual memory facilitates novel language learning regardless of alphabetic or character-based scripts.
El documento resume las principales civilizaciones de la antigüedad en China, Egipto, la India y Roma. Describe aspectos geográficos, hitos históricos, creencias religiosas, inventos culturales y obras arquitectónicas características de cada civilización. Explica cómo estas culturas antiguas moldearon las sociedades y pensamientos del mundo moderno.
The document shows a diagram with blue and black dashed lines representing new and old dimensions. It discusses folding fabric and stitching it onto a blue dashed line, with the black dashed line representing an old dimension and the blue line a new dimension.
The document provides assembly instructions for building a Paint Aid, which is an adapted easel and painting kit for use by wheelchair users. It consists of 27 steps to assemble the wooden boards, attach supports to a wheelchair, and add accessories like ribbon handles and a paint holder. Tools required include a saw, drill, screws, glue, and other basic hardware. The instructions provide diagrams and details for cutting boards to specific sizes, drilling holes, and assembling the pieces to create a functional painting kit that attaches securely to a wheelchair.
This document summarizes key points from multiple source materials related to motivation in psychology and business. It discusses intrinsic and extrinsic motivation, locus of control theory developed by Julian Rotter, attribution theory created by Fritz Heider, and the three types of attribution. It also profiles cognitive psychologist Bernard Weiner and his work. Finally, it outlines five ways that the Ritz-Carlton Company motivates employees, such as sharing "wow stories" and demonstrating passion.
O documento discute a degeneração gordurosa ou lipidose hepática, uma doença causada pelo acúmulo excessivo de gordura no fígado. A doença ocorre quando há desequilíbrio entre a captação e utilização de ácidos graxos pelo fígado e pode ser resultado de problemas como ingestão excessiva de gordura ou carboidratos, mobilização aumentada de gordura corporal ou disfunção hepática. Sinais clínicos incluem perda de peso, vômitos e icterícia. O tratamento
This document provides step-by-step instructions for constructing double hung windows. It explains how to receive plans, make a cutting list, machine materials, construct frames, lay out sashes, cut mortises and tenons, and assemble components. Key steps include receiving plans, machining materials to size, constructing frames by gluing and screwing together head, sills, jambs and mullions, laying out and cutting mortises and tenons for sashes, and assembling sashes using mortise and tenon joints.
This study examines the cognitive load of bilingual and monolingual individuals when learning novel Chinese words. The researcher hypothesizes that adding a character-based language will produce memory problems only for monolinguals due to the higher cognitive load. Participants include English-Italian/Spanish bilinguals and English monolinguals who complete a task memorizing Chinese words and definitions. The researcher expects bilinguals to correctly recall more words due to their integrated language processing system enabling them to better manage the cognitive load of learning character-based words. Results will be analyzed to see if bilinguals overcome this high load task, indicating bilingual memory facilitates novel language learning regardless of alphabetic or character-based scripts.
El documento resume las principales civilizaciones de la antigüedad en China, Egipto, la India y Roma. Describe aspectos geográficos, hitos históricos, creencias religiosas, inventos culturales y obras arquitectónicas características de cada civilización. Explica cómo estas culturas antiguas moldearon las sociedades y pensamientos del mundo moderno.
The document shows a diagram with blue and black dashed lines representing new and old dimensions. It discusses folding fabric and stitching it onto a blue dashed line, with the black dashed line representing an old dimension and the blue line a new dimension.
The document provides assembly instructions for building a Paint Aid, which is an adapted easel and painting kit for use by wheelchair users. It consists of 27 steps to assemble the wooden boards, attach supports to a wheelchair, and add accessories like ribbon handles and a paint holder. Tools required include a saw, drill, screws, glue, and other basic hardware. The instructions provide diagrams and details for cutting boards to specific sizes, drilling holes, and assembling the pieces to create a functional painting kit that attaches securely to a wheelchair.
This document summarizes key points from multiple source materials related to motivation in psychology and business. It discusses intrinsic and extrinsic motivation, locus of control theory developed by Julian Rotter, attribution theory created by Fritz Heider, and the three types of attribution. It also profiles cognitive psychologist Bernard Weiner and his work. Finally, it outlines five ways that the Ritz-Carlton Company motivates employees, such as sharing "wow stories" and demonstrating passion.
O documento discute a degeneração gordurosa ou lipidose hepática, uma doença causada pelo acúmulo excessivo de gordura no fígado. A doença ocorre quando há desequilíbrio entre a captação e utilização de ácidos graxos pelo fígado e pode ser resultado de problemas como ingestão excessiva de gordura ou carboidratos, mobilização aumentada de gordura corporal ou disfunção hepática. Sinais clínicos incluem perda de peso, vômitos e icterícia. O tratamento
This document provides assembly instructions for creating the TAFELMES 6.0, which is a cutting board and knife holder designed for people with disabilities. It lists the necessary materials and provides 23 step-by-step instructions for making the wooden support, metal knife holder, and assembling the final product. The instructions include drawing outlines, cutting, drilling, sanding, welding, painting and screwing parts together. Diagrams are provided to illustrate each step. Contact information is given for the design team.
Stampomatica / How to Make a Postcard PressTecnificio
This document provides step-by-step instructions for assembling a DIY postcard press kit from Stampomatica. It involves joining small metal and wooden components using threaded rods, nuts, and an Allen key to construct the base, sides, and lever system of the press. Paper and a 3D printing plate are then placed inside, color is rolled onto the plate, and the levers are pressed together to print the design onto the paper. The finished postcards can then be shared on social media.
This document provides assembly instructions for a sauna wheelchair. It describes 17 steps to construct the wheelchair, including removing fabric from an existing wheelchair, adding wooden bars and supports, installing a foot support tube, and covering parts with protective tape. The bill of materials lists the wooden, metal, and other components needed to construct the wheelchair, which was designed by students for 103 euros excluding wood costs.
HET OPRIJVALIESJE:
De oprijvalies is uitgevonden door Julien Scheers voor zijn vrouw Eveline. Het is een tweedelig hulmiddel met als doel haar zware elektrische rolstoel over de drempels van verschillende handelszaken uit de omgeving heen te helpen. Voor het plaatsen van het hulpmiddel is Eveline echter altijd aangewezen op hulp van derden (gezin, familie,…vrienden), die het valiesje dan ook met plezier uit de wagen halen.
De focus van dit project was om het bestaande oprijvaliesje in een nieuwe ontwerpiteratie te brengen. Volgende eigenschappen werden tijdens het proces van co-creatie als belangrijke elementen naar voor geschoven. Namelijk, het reduceren van het totale volume en gewicht. Het bewaken van de eenvoud in gebruik zowel tijdens het plaatsen als bij het dragen. De mogelijkheid om het product na te bouwen door middel van ‘Do It Yourself’ manufacturing. Bovendien moeten alle materialen voor fabricatie voorhanden zijn uit eenzelfde lokale doe-het-zelf zaak.
Het resultaat is een multifunctionele en gebruiksvriendelijke hulp volledig geënt op de wensen van Eveline. Zo is het oprij-hulpstuk voorzien van een ideale hoek van 17°, wat zorgt voor het probleemloos op en afrijden van de helling. Het rubber onderaan de voeten vangt oneffenheden in het wegdek op en zorgt net zoals het antislip voor voldoende weerstand bij het op- en afrijden. Door de reductie van volume en gewicht en het feit dat men de ramp snel kan omvormen tot een handige draagtas, is dit hulpmiddel niet alleen gebruiksvriendelijk voor Eveline maar ook voor haar omgeving.
Stampomatica / How to Make a Business Card PressTecnificio
1. The document provides step-by-step instructions for assembling a DIY letterpress business card maker kit from Stampomatica. It involves selecting various metal and wooden components from packets and using an Allen key to connect parts like the lever and sides to create the press.
2. Once assembled, the press is used by painting a 3D printing plate included in the kit, placing the paper stock on top, followed by felt and a pressure plane. Squeezing the lever imprints the design onto the paper.
3. Users are invited to share prints online using hashtags to promote Stampomatica, an open source letterpress project made in Italy.
This document provides assembly instructions for a scale called Weegschaal 2011. It includes bills of materials, descriptions of production steps, and links to technical plans. The scale is assembled using various tools like lasers, mills, drills, saws and more. Parts are cut from wood, plexiglass, aluminum and other materials. Production of the scale takes approximately 27 hours and costs around 80 euros to produce. Links provided give more details on the design project.
The document provides assembly instructions for making a bottle holder out of polypropylene sheets using various tools. It describes 12 steps for cutting, numbering, smoothing, creating molds, bending, and assembling the pieces. The bottle holder can be made using a laser cutter in 2 hours or manually in 5.5 hours. It requires 8 different tools and 7 standard parts that are purchased.
This is the tutorial for make the wheelchair wheel dryer by yourself. This is designed in function of the cocreation project with a person in a wheelchair..
This document provides assembly instructions for creating a bottle holder from polypropylene sheets. It outlines 12 steps for cutting, shaping, and assembling the various plastic parts using tools like a laser cutter, heat gun, drills, molds, and clamps. Standard materials needed include polypropylene sheets, wood boards, pipes, and glue. The instructions include diagrams and advise care when applying heat to correctly form the curved plastic pieces.
The document is an assembly manual for building a transport rollator. It provides 32 detailed steps to construct the rollator, which includes milling, cutting, gluing, and assembling various wood, metal, and plastic parts. The overall cost to build the rollator is €180 and it takes approximately 2 days to complete. Precise tools like a CNC milling machine are used to shape some parts, while other pieces like the handle and pedal assembly involve additional fabrication steps like welding, painting, and finishing. Upon completing all 32 steps, the finished rollator is made up of conductors, a supporting board, and triangles to provide a rolling walker for transportation.
This document provides assembly instructions for building the Grond1ller 1.7, which is a tool for tilling soil. It lists the required materials, which include Dacron sail sheet, metal rods, and strong magnets. It then provides step-by-step instructions on how to cut and sew the Dacron sheet to form handles and attach the metal rods and magnet. Diagrams are included to illustrate the cutting patterns. Contact information is given for the design team.
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
vcoba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
This document provides assembly instructions for a home exercise bike called the Pedalokrukken 3.4. It consists of 3 sentences:
The document lists all materials needed and provides 26 steps to assemble the bike from multiple wood and metal parts. Customizations like foot supports and handlebar extensions are also described. Technical addendums provide exploded views and dimensions.
Year 10 Engineering - Lesson 5 - How To Mark Out The SpinnerRob Winter
The document provides step-by-step instructions for marking out a hexagonal spinner shape on a piece of metal using various tools. It describes cleaning the metal, drawing center and edge lines using a square and scribe, punching indentation marks at set intervals, using dividers to draw quarter circles connecting the marks to create the hexagon outline, and then joining the marks with lines. The overall process allows for precisely marking out the hexagonal shape for cutting.
The document provides instructions for how to make various archery equipment at home, including bow risers, limbs, strings, and other accessories. It describes the necessary materials, tools, and steps to construct each item. Specific directions are given for cutting, shaping, and assembling bamboo limbs and attaching them to a wooden riser. The string construction section outlines using a string jig and winding Dacron strands evenly while maintaining equal tension across all strands.
Building giant articulated hands carved from woodjessica30251
So I know we’re all going through a lot right now. This whole distancing thing is really starting to wear on us and that’ll never be truer than during this holiday season. That’s why I invented these. Stay 6’ away from your friends and family while doing all the activities just like you used to. It’s almost like they’re not even there!
The build all starts by planing down a bunch of basswood lumber that was reclaimed from a friend of mine. I chose basswood specifically for this project because of it's light weight and also because the grain is very even and straight, which makes it easier to carve. Each of these boards gets planed down and then sanded with the drum sander to exactly an inch thick.
Do-It-Yourself Fruit Picker Using Thread Clipper ScissorManohar M Hegde
A step by step illustrated procedure to make inexpensive Fruit picker has been presented. Fruit growers growing many different types of fruits cannot afford to buy a Fruit picker from market for each type of fruit. They can make their own Fruit pickers,suitable for different fruits, using easily available day to day items.
This document provides instructions to build a collapsible counter-balance floor loom. It details all the materials and tools needed, and provides step-by-step instructions to construct the frame, beams, pedals, lams, harnesses and heddles. Color coding and string attachments are used to connect the pedals to lams and lams to harnesses, allowing the user to control the raising and lowering of the harnesses through foot pedals to create weaving patterns. Once completed, the loom can be used to measure warp threads and weave fabric.
Covey says most people look for quick fixes. They see a big success and want to know how he did it, believing (and hoping) they can do the same following a quick bullet list.
But real change, the author says, comes not from the outside in, but from the inside out. And the most fundamental way of changing yourself is through a paradigm shift.
That paradigm shift is a new way of looking at the world. The 7 Habits of Highly Effective People presents an approach to effectiveness based on character and principles.
The first three habits indeed deal with yourself because it all starts with you. The first three habits move you from dependence from the world to the independence of making your own world.
Habits 4, 5 and 6 are about people and relationships. The will move you from independence to interdependence. Such, cooperating to achieve more than you could have by yourself.
The last habit, habit number 7, focuses on continuous growth and improvement.
This document provides assembly instructions for creating the TAFELMES 6.0, which is a cutting board and knife holder designed for people with disabilities. It lists the necessary materials and provides 23 step-by-step instructions for making the wooden support, metal knife holder, and assembling the final product. The instructions include drawing outlines, cutting, drilling, sanding, welding, painting and screwing parts together. Diagrams are provided to illustrate each step. Contact information is given for the design team.
Stampomatica / How to Make a Postcard PressTecnificio
This document provides step-by-step instructions for assembling a DIY postcard press kit from Stampomatica. It involves joining small metal and wooden components using threaded rods, nuts, and an Allen key to construct the base, sides, and lever system of the press. Paper and a 3D printing plate are then placed inside, color is rolled onto the plate, and the levers are pressed together to print the design onto the paper. The finished postcards can then be shared on social media.
This document provides assembly instructions for a sauna wheelchair. It describes 17 steps to construct the wheelchair, including removing fabric from an existing wheelchair, adding wooden bars and supports, installing a foot support tube, and covering parts with protective tape. The bill of materials lists the wooden, metal, and other components needed to construct the wheelchair, which was designed by students for 103 euros excluding wood costs.
HET OPRIJVALIESJE:
De oprijvalies is uitgevonden door Julien Scheers voor zijn vrouw Eveline. Het is een tweedelig hulmiddel met als doel haar zware elektrische rolstoel over de drempels van verschillende handelszaken uit de omgeving heen te helpen. Voor het plaatsen van het hulpmiddel is Eveline echter altijd aangewezen op hulp van derden (gezin, familie,…vrienden), die het valiesje dan ook met plezier uit de wagen halen.
De focus van dit project was om het bestaande oprijvaliesje in een nieuwe ontwerpiteratie te brengen. Volgende eigenschappen werden tijdens het proces van co-creatie als belangrijke elementen naar voor geschoven. Namelijk, het reduceren van het totale volume en gewicht. Het bewaken van de eenvoud in gebruik zowel tijdens het plaatsen als bij het dragen. De mogelijkheid om het product na te bouwen door middel van ‘Do It Yourself’ manufacturing. Bovendien moeten alle materialen voor fabricatie voorhanden zijn uit eenzelfde lokale doe-het-zelf zaak.
Het resultaat is een multifunctionele en gebruiksvriendelijke hulp volledig geënt op de wensen van Eveline. Zo is het oprij-hulpstuk voorzien van een ideale hoek van 17°, wat zorgt voor het probleemloos op en afrijden van de helling. Het rubber onderaan de voeten vangt oneffenheden in het wegdek op en zorgt net zoals het antislip voor voldoende weerstand bij het op- en afrijden. Door de reductie van volume en gewicht en het feit dat men de ramp snel kan omvormen tot een handige draagtas, is dit hulpmiddel niet alleen gebruiksvriendelijk voor Eveline maar ook voor haar omgeving.
Stampomatica / How to Make a Business Card PressTecnificio
1. The document provides step-by-step instructions for assembling a DIY letterpress business card maker kit from Stampomatica. It involves selecting various metal and wooden components from packets and using an Allen key to connect parts like the lever and sides to create the press.
2. Once assembled, the press is used by painting a 3D printing plate included in the kit, placing the paper stock on top, followed by felt and a pressure plane. Squeezing the lever imprints the design onto the paper.
3. Users are invited to share prints online using hashtags to promote Stampomatica, an open source letterpress project made in Italy.
This document provides assembly instructions for a scale called Weegschaal 2011. It includes bills of materials, descriptions of production steps, and links to technical plans. The scale is assembled using various tools like lasers, mills, drills, saws and more. Parts are cut from wood, plexiglass, aluminum and other materials. Production of the scale takes approximately 27 hours and costs around 80 euros to produce. Links provided give more details on the design project.
The document provides assembly instructions for making a bottle holder out of polypropylene sheets using various tools. It describes 12 steps for cutting, numbering, smoothing, creating molds, bending, and assembling the pieces. The bottle holder can be made using a laser cutter in 2 hours or manually in 5.5 hours. It requires 8 different tools and 7 standard parts that are purchased.
This is the tutorial for make the wheelchair wheel dryer by yourself. This is designed in function of the cocreation project with a person in a wheelchair..
This document provides assembly instructions for creating a bottle holder from polypropylene sheets. It outlines 12 steps for cutting, shaping, and assembling the various plastic parts using tools like a laser cutter, heat gun, drills, molds, and clamps. Standard materials needed include polypropylene sheets, wood boards, pipes, and glue. The instructions include diagrams and advise care when applying heat to correctly form the curved plastic pieces.
The document is an assembly manual for building a transport rollator. It provides 32 detailed steps to construct the rollator, which includes milling, cutting, gluing, and assembling various wood, metal, and plastic parts. The overall cost to build the rollator is €180 and it takes approximately 2 days to complete. Precise tools like a CNC milling machine are used to shape some parts, while other pieces like the handle and pedal assembly involve additional fabrication steps like welding, painting, and finishing. Upon completing all 32 steps, the finished rollator is made up of conductors, a supporting board, and triangles to provide a rolling walker for transportation.
This document provides assembly instructions for building the Grond1ller 1.7, which is a tool for tilling soil. It lists the required materials, which include Dacron sail sheet, metal rods, and strong magnets. It then provides step-by-step instructions on how to cut and sew the Dacron sheet to form handles and attach the metal rods and magnet. Diagrams are included to illustrate the cutting patterns. Contact information is given for the design team.
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
vcoba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
coba upload berkas untuk uji coba sma kartini batam .
yang di share ke publik alamat web.
contoh dan sample saja untuk berkas pdf Upload presentations, documents, infographics,a
This document provides assembly instructions for a home exercise bike called the Pedalokrukken 3.4. It consists of 3 sentences:
The document lists all materials needed and provides 26 steps to assemble the bike from multiple wood and metal parts. Customizations like foot supports and handlebar extensions are also described. Technical addendums provide exploded views and dimensions.
Year 10 Engineering - Lesson 5 - How To Mark Out The SpinnerRob Winter
The document provides step-by-step instructions for marking out a hexagonal spinner shape on a piece of metal using various tools. It describes cleaning the metal, drawing center and edge lines using a square and scribe, punching indentation marks at set intervals, using dividers to draw quarter circles connecting the marks to create the hexagon outline, and then joining the marks with lines. The overall process allows for precisely marking out the hexagonal shape for cutting.
The document provides instructions for how to make various archery equipment at home, including bow risers, limbs, strings, and other accessories. It describes the necessary materials, tools, and steps to construct each item. Specific directions are given for cutting, shaping, and assembling bamboo limbs and attaching them to a wooden riser. The string construction section outlines using a string jig and winding Dacron strands evenly while maintaining equal tension across all strands.
Building giant articulated hands carved from woodjessica30251
So I know we’re all going through a lot right now. This whole distancing thing is really starting to wear on us and that’ll never be truer than during this holiday season. That’s why I invented these. Stay 6’ away from your friends and family while doing all the activities just like you used to. It’s almost like they’re not even there!
The build all starts by planing down a bunch of basswood lumber that was reclaimed from a friend of mine. I chose basswood specifically for this project because of it's light weight and also because the grain is very even and straight, which makes it easier to carve. Each of these boards gets planed down and then sanded with the drum sander to exactly an inch thick.
Do-It-Yourself Fruit Picker Using Thread Clipper ScissorManohar M Hegde
A step by step illustrated procedure to make inexpensive Fruit picker has been presented. Fruit growers growing many different types of fruits cannot afford to buy a Fruit picker from market for each type of fruit. They can make their own Fruit pickers,suitable for different fruits, using easily available day to day items.
This document provides instructions to build a collapsible counter-balance floor loom. It details all the materials and tools needed, and provides step-by-step instructions to construct the frame, beams, pedals, lams, harnesses and heddles. Color coding and string attachments are used to connect the pedals to lams and lams to harnesses, allowing the user to control the raising and lowering of the harnesses through foot pedals to create weaving patterns. Once completed, the loom can be used to measure warp threads and weave fabric.
Covey says most people look for quick fixes. They see a big success and want to know how he did it, believing (and hoping) they can do the same following a quick bullet list.
But real change, the author says, comes not from the outside in, but from the inside out. And the most fundamental way of changing yourself is through a paradigm shift.
That paradigm shift is a new way of looking at the world. The 7 Habits of Highly Effective People presents an approach to effectiveness based on character and principles.
The first three habits indeed deal with yourself because it all starts with you. The first three habits move you from dependence from the world to the independence of making your own world.
Habits 4, 5 and 6 are about people and relationships. The will move you from independence to interdependence. Such, cooperating to achieve more than you could have by yourself.
The last habit, habit number 7, focuses on continuous growth and improvement.
Understanding of Self - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
This presentation delves into the core principles of personality development as taught by Tim Han. Understand the importance of self-awareness, goal setting, and maintaining a positive attitude. Gain valuable tips on improving communication skills and developing emotional intelligence. Tim Han’s practical advice and holistic approach will help you embark on a transformative journey towards becoming your best self.
Aggression - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
Stealth attraction for mens gets her with your wordsichettrisagar95
My article gives a set of techniques used by men to subtly and effectively attract women without overtly displaying their intentions. It involves using non-verbal cues, body language, and subtle psychological tactics to create intrigue and build attraction. The goal is to appear confident, mysterious, and charismatic while maintaining an air of mystery that piques the interest of the person you are trying to attract. This approach emphasizes subtlety and finesse in communication and interaction to create a powerful and lasting impression.
ProSocial Behaviour - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
2. PAINT AID
€ 80 148 ‘ (2 u 28’)
Charlotte De Ruytter
http://speelmat2011.blogspot.com/ Wouter Velle
Paulina Hernandez Santamaria
http://designforeveryone.howest.be/
4. PAINT AID
BILL OF MATERIAL
4 quickstep
2 metal pipe (diameter 22mm length 70cm)
2 wheel chair supports
2 quickstep supports (arm rest)
2 quickstep supports (next arm rest)
2 quickstep connection (board-pipe)
6 screws (diameter 5 mm)
6 nuts (diameter 5 mm)
6 washers (diameter 5 mm)
1 bag (supports)
1 bag (paint)
1 paper holder
4 ribbon holders
Velcro
Press buttons
Rubber
Glue, scissors, thread, needle.
Tweezers
Jigsaw
Drill
Drill bits (9mm, 5mm)
Press
Screwdriver
Tape measure
Double sided tape
15 tools
3
21
5.
6. 1 PAINT AID
DESCRIPTION
Confirm you have 2 table attachment pipes
on each side of the wheelchair, if not, you
can buy them easily at an wheelchair supply
store. Attach to the wheelchair.
No plan needed
5’
Screwdriver
Attachment pipes for the weelchair
2
Depending on the needs
7. 2 PAINT AID
DESCRIPTION
Put the 2 metal tubes into each attachment
pipe.
No plan needed
1’
No tools needed
2 metal tubes
2
€ 19,60
8. 3 PAINT AID
DESCRIPTION
Measure the distance between the 2 pipes
(center to center) and add 10cm. Write this
distance down because you will need it to cut
the boards.
No plan needed
1’
Tapeline
No parts bought
No parts added
€0
9. 4 PAINT AID
DESCRIPTION
Cut the quickstep to get 4 pieces of the
obtained measurement. (as described in step
3).
Cut 6 pieces of 17cm long quickstep.
For clean edges it is best to use a buzz saw but if
you don’t have one, you can also use a jigsaw.
No plans needed
10’
Saw
Quickstep boards
10
€ 33,59
10. 5 PAINT AID
DESCRIPTION
Tape the 17 cm long pieces together with the
double sided tape in groups of two. Make
sure you only tape on the backside.
No plans needed
4’
Double sided tape
Double sided tape
0
€ 10,49
11. 6 PAINT AID
DESCRIPTION
Print plan A twice, plan B, C and D once and
cut them out roughly.
Plans A & B needed
3’
Printer, computer
No parts bought
0
€0
12. 7 PAINT AID
DESCRIPTION
Tape the printed plans onto the pieces.
No plans needed
1’
Double sided tape
No parts bought
0
€0
13. 8 PAINT AID
DESCRIPTION
Drill the required holes on plan B (diameter
9mm)
Plan B needed
4’
Drill, woodbit (diameter 9 mm), screw clamp
No parts bought
0
€0
14. 9 PAINT AID
DESCRIPTION
Saw plan A & B on the provided guidelines
using a jig saw. Plan A is a plan made
especially for Ludwiene’s wheelchair. It is
possible that you have to change some
dimensions.
Plan A & B needed
10’
Jig Saw, screw clamp
No parts bought
0
€0
15. 10 PAINT AID
DESCRIPTION
File the holes clean.
Plan B needed
5’
Wood file
No parts bought
0
€0
16. 11 PAINT AID
DESCRIPTION
Detach the taped pieces and remove the
plans.
When ready remove the two parts from
eachother. Now you have 2 equal pieces
from plan B and 4 pieces from plan A.
When needed, sandpaper the edges of the
pieces.
No plans needed
1’
No tools needed
No parst bought
0
€0
17. 12 PAINT AID
DESCRIPTION
Glue the pieces A back together with wood
glue and let them dry under pressure.
No plans needed
3’ action, 30’ drying
Screw clamps, woodglue
Wood glue
0
€ 2,50
18. 13 PAINT AID
Cut
DESCRIPTION
pieces of rubber.
Two times 16mm x 50mm, four times (16mm
x 45mm) and twice 16 mm x 15 mm
No plans needed
2’
Sharp knife of scissors
No parts bought
0
€0
19. 14 PAINT AID
DESCRIPTION
Glue the rubber into the attachment system
using superglue.
No plans needed
4’
Superglue
Superglue
2
€ 0,59 (Zeeman)
20. 14 PAINT AID
DESCRIPTION
Take a new board of quickstep and saw 2
pieces as noted on drawing C. Be sure you
use the good side of the board!
Plan C needed
5’
Saw
No parts bought
0
€0
21. PAINT AID
DESCRIPTION
15
Tape the paper pieces from drawing C onto
the two pieces of quickstep.
Plan C needed
1’
Double sided tape
No parts bought
0
€0
22. 16 PAINT AID
DESCRIPTION
Drill the hole as shown on the print. Be
carefull you position the hole correctly, a
wood-drill is better than a metal-drill.
(diameter: 5mm)
When drilling with a metal-drill we suggest to
drill a smaller hole first.
Plan C needed
5’
Drill, woodbit (diameter 5 mm)
No parts bought
0
€0
23. 17 PAINT AID
DESCRIPTION
Carefully, cut out the leaving part of the
wooden piece.
Plan C needed
4’
Saw, screw clamp
No parts bought
0
€0
24. 18 PAINT AID
DESCRIPTION
To make the bolts fit exactly into the wood,
you can carefully drill a tapered edge in al
the holes, this with a bigger drill.
No plans needed
3’
Wood glue
No parts bought
0
€0
25. 19 PAINT AID
DESCRIPTION
Glue pieces B and C together using wood
glue. Press hard.
No plans needed
3’ action, 30’ drying
Screw clamp
No parts bought
0
€0
26. 20 PAINT AID
DESCRIPTION
Remove the metal tubes from the wheelchair
and cut them at 60cm.
No plans needed
6’
Metal saw
No parts bought
0
€0
27. 21 PAINT AID
DESCRIPTION
Drill holes in the metal pipe as shown on
drawing D.
Plan D needed
18’
Drill, metal drill (diameter 5 mm)
No parts bought
0
€0
28. 22 PAINT AID
DESCRIPTION
Use the countersunk M8 bolts, washers and
nuts to put it all together.
Repeat for the second tube. When ready,
refix the tubes onto the wheelchair.
No plan needed
8’
Screwdriver
Countersunk M8 bolts, washers & nuts
3
€ 12
29. 23 PAINT AID
DESCRIPTION
Cut 3 pieces of white ribbon and one red
ribbon.
Create 2 corners of 90° and sew them
together. Do this for each ribbon. You can
choose the best length to make the handle.
No plans needed
10’
Needle, wire & ribbon
No parts bought
No parts added
€0
30. 24 PAINT AID
DESCRIPTION
Glue the ribbons to the boards. Be sure you
glue them at the right side. In the picture you
can see which side you have to glue them to.
Use screw clamps to let the glue dry under
pressure.
.
No plans needed
9’ action, 10’ drying
Superglue
No parts bought
No parts added
€0
31. 25 PAINT AID
DESCRIPTION
Now you have the four boards you need, you
still have to turn one board into a paint
palette.
The board with the red ribbon is the one that
we’re turning into a paint palette. Be sure you
use the right board to continue the next
steps.
.
No plans needed
0’
No tools needed
No parts bought
No parts added
€0
32. 26 PAINT AID
DESCRIPTION
Position a circle (diameter of your water cup)
on the Quickstep-board with the red ribon.
Drill a hole inside the circle.
No plan needed
10’
Drill & woodbit
No parts bought
0
€0
33. 27 PAINT AID
DESCRIPTION
Cut out the circle with a jig saw using the
hole from the previous step as a start point.
Sandpaper the hole.
No plan needed
12’
Jigsaw
No parts bought
0
€0
45. HOW TO USE TECHNICAL
ADDENDUM
The plans needed to be printed at scale 1:1. This
way you can easily cut them en tape them onto the
wood to saw/drill.
To print the plans, click on the attached links.
Plan A
Plan B
Plan C
Plan D
Extra’s:
Bags
Here is the principle of how the bags are made