Acoustiscreen panels are sound absorbing wall panels made of polyester fibre. They are available in seven colors and thicknesses of 12mm, 25mm, or 50mm. Acoustiscreen panels reduce noise and reverberation in interior spaces like offices, schools, and performance venues. Testing shows the 12mm panels can absorb up to 85% of sound reaching them. The panels are sustainable as they contain 65% recycled content and have low VOC emissions.

1. Acoustiscreen
™
Polyester Fibre Wall Panels
Acoustiscreen Colourful Acoustic Wall Panels
Benefits Sound absorbing, pinnable surface
Acoustiscreen Sound Absorbing Wall Panels are
part of the Sontext range of internal noise control
systems. The systems are designed to provide
maximum decorative design flexibility while at the
same time significantly improving the sound quality
of internal spaces by minimising reverberation. The
Acoustiscreen range provides both colour and
acoustic control, with the added advantage of
suitability as pin boards. Acoustiscreen is made
from polyester fibre, is non-toxic, odourless, and
has low volatile content. Acoustiscreen
complements the existing Sontext range of fabricfaced and perforated timber acoustic panel
products, ensuring our clients have maximum
choice of acoustic solutions for interior sound
control.
Textured fibrous panels in seven colours.
Manufactured from 65% (approx.) recycled
polyester fibres.
Humidity & moisture resistant
Odourless, low-VOC content and non-toxic.
Fire resistant
Lightweight (approx. 2.4kg/m2 for 12mm
thick panel).
Acoustic Performance
By incorporating Acoustiscreen Wall Panels as either a new wall lining or by direct fixing them to existing
walls, the reduction in unwanted noise can be quite significant. At some frequencies, up to 100% of sound
can be absorbed by utilising Acoustiscreen Panels of appropriate thickness and/or by installing the panels
with an air space behind them.
Acoustiscreen Panels have been tested in N.A.T.A. registered laboratories in a reverberation chamber, and
have achieved Noise Reduction Coefficients (N.R.C.) as shown. (Note: An NRC of 0.85 means that up to
85% of the sound reaching the panel is absorbed. Low frequency absorption can be increased by installing
the panels with an air gap behind them, or by increasing the thickness of the panel.
Sound Absorption Coefficients at various frequencies (Hz)
Thickness
125
250
500
1000
2000
4000
N.R.C
.
12mm
0.05
0.10
0.40
0.70
0.90
0.95
0.50
Acoustiscreen Panels have been tested in a reverberation chamber test to AS 1045 –1988 “Measurement of Sound
Absorption in a Reverberation Chamber” (based on ISO354).

2. Acoustiscreen Applications.
Colour Range
Current interior design trends in modern commercial
buildings can often include hard surfaces on ceilings and
walls. These hard surfaces can cause problems with
reflected sound. These Interior spaces may be difficult to
utilise fully simply because (a) noise levels may be
unacceptably high or (b) reverberation causes speech,
music etc to be hard to hear clearly or is distorted.
Acoustiscreen Acoustic panels are available in a range
of 7 colours as shown below. Thse panels can also be
combined with facing fabrics if required.
Light Grey
Dazzle Yellow
Acoustiscreen Acoustic Panels are ideal for use in all
types of commercial premises, both new or existing,
such as Boardrooms and Meeting Rooms
Convention centres/exhibition centres
Sports Centres and Gyms,
Multi purpose venues
Schools and University classrooms and lecture theatres
Churches and Halls
Sound recording studios.
Chrome Orange
Fruity Green
Silver Grey
Acoustiscreen is designed for installation to virtually any
existing interior wall lining, such as plasterboard, brick or
concrete. There are many fixing options available, such
as framed panels, simple adhesive fixing, etc. Please
discuss you requirements with your Sontext Distributor or
contact Sontext direct.
Red
Charcoal
Acoustiscreen Characteristics
Sustainability
Common Panel Sizes 1200 x 2400
(mm)
1200 x 600
2400 x 600
1200 x 1200
Acoustiscreen is manufactured from inert polyester fibre,
with 65% recycled content. No other adhesives or
binders are used to form the product.
Acoustiscreen is odourless, and contains no detectable
Volatile Organic Compounds (VOC content).
Tests indicate Acoustiscreen contains no detectable
heavy metals, formaldehyde or phenolic content.
Thicknesses (mm)
12, (25 and 50mm thicknesses
can be supplied on request)
Nominal Weight
2.4kg/m2 at 12mm thick
Composition
100% PET, approx.
65% recycled content.
Material Type
Non-woven Fibrous Board
Environmental
Non-toxic, odourless, low VOC
Specifying Acoustiscreen Polyester Panels
To ensure you describe Acoustiscreen Polyester
Panels accurately, include the following in you
specification:
“Acoustic or Pinboard Wall or Ceiling Panels shall
be Acoustiscreen Polyester Panels from Sontext”,
•
Size (...mm thick x ...mm high x ...mm wide)
•
Colour .(name), or
•
Fabric Facing,
..(name), ...(product
code),
.
(manufacturer)
•
Number of panels required
..
For further information, contact Sontext Pty Ltd or its Distributors:
Vic Office & Head Office Australia:
685 Burke Road, Camberwell, Victoria, Australia 3124
T: +61 (0)3 9811 4796
E: sales@sontext.com.au
NSW Office:
Suite 1a, Level 2, 802 Pacific Hwy, Gordon, NSW, Australia 2702
T: +61 (0)2 9844 5414
For more information, visit: www.sontext.com.au
Copyright 2008 by Shamrock Consulting Pty Ltd ,Trading as Sontext P/L, ABN 090 38 090 867 Australia, www.sontext.com.au. Sontext, Murano, Sonofonic,
Sonobaffles & Serenity are registered business names used by Shamrock Consulting. Fabritrak is a registered trademark of FabriTRAK Systems, Inc. (USA)