Omer Ijaz is an electrical engineer with over 6 years of experience in testing and commissioning of electrical power projects in Saudi Arabia. He has expertise in high voltage cable and busbar testing, protection relay testing, transformer and generator circuit breaker commissioning. He is skilled in test design, development and operations, and has experience coordinating complex testing and commissioning activities.
I am working as a Electrical Commissioning Engineer / CompEx Inspector/QAQC Engineer for the 14 years Experience and happy to mention some of my achievements in this role
I am working as a Electrical Commissioning Engineer / CompEx Inspector/QAQC Engineer for the 14 years Experience and happy to mention some of my achievements in this role
BE-ELECTRICAL SENIOR TESTING AND COMMISSIONING ENGINEERGanesan Raja
I HAVE SUCCESSFULLY TESTING AND COMMISSIONED 415 V TO 765KV SYSTEM OF SUBSTATION AND GENERATION POWER PLANTS,CEMENT PLANTS INCLUDING GAS INSULATION SUBSTATION
1.Testing, commissioning and maintenance of SCADA /DCS systems and Electrical Drives.
2. Good knowledge of all IEC 61850 standards especially new one IEC 61850-90-1,IEC 61850-90-5 and IEC 61850-9-2LE and configuration process of IEC 61850 based substation automation system.
3. Testing and commissioning of relays of Siemens , SEL and ABB.And testing and commissioning of PCC,PDB, MLDB, Bus-bar, motors ,transformers.
4. HV & LV cables: Laying & termination of HV & LV cables and connection to the panels .
5. Installation of LV Switchgear for the power supply to the LV motors & motor operated valves.
6. Installation of LV motors, Laying & termination of the cables & connection to the motors of different sizes of pumps.
7. Installation of motor operated valve (Mov) : Installation & Erection of control circuits, Laying & connection of LV cables.
8. Testing & commissioning of the electrical instrument such as HMD(Hot Metal Dictator) , pyrometers , proximity sensors ,pressure switches etc
9. Commissioning & Maintenance & Testing of all HT and LT switchgear equipment like Transformers, Relays and Breakers (ACB & VCB).
10. Shutdown maintenance of electrical equipment.
With an experience in the field of Testing and Commissioning of power system products, I look forward for an opportunity to display my skills in the field of Testing & commissioning ,Operation & Maintenance and Execution of projects related to power systems.
BE-ELECTRICAL SENIOR TESTING AND COMMISSIONING ENGINEERGanesan Raja
I HAVE SUCCESSFULLY TESTING AND COMMISSIONED 415 V TO 765KV SYSTEM OF SUBSTATION AND GENERATION POWER PLANTS,CEMENT PLANTS INCLUDING GAS INSULATION SUBSTATION
1.Testing, commissioning and maintenance of SCADA /DCS systems and Electrical Drives.
2. Good knowledge of all IEC 61850 standards especially new one IEC 61850-90-1,IEC 61850-90-5 and IEC 61850-9-2LE and configuration process of IEC 61850 based substation automation system.
3. Testing and commissioning of relays of Siemens , SEL and ABB.And testing and commissioning of PCC,PDB, MLDB, Bus-bar, motors ,transformers.
4. HV & LV cables: Laying & termination of HV & LV cables and connection to the panels .
5. Installation of LV Switchgear for the power supply to the LV motors & motor operated valves.
6. Installation of LV motors, Laying & termination of the cables & connection to the motors of different sizes of pumps.
7. Installation of motor operated valve (Mov) : Installation & Erection of control circuits, Laying & connection of LV cables.
8. Testing & commissioning of the electrical instrument such as HMD(Hot Metal Dictator) , pyrometers , proximity sensors ,pressure switches etc
9. Commissioning & Maintenance & Testing of all HT and LT switchgear equipment like Transformers, Relays and Breakers (ACB & VCB).
10. Shutdown maintenance of electrical equipment.
With an experience in the field of Testing and Commissioning of power system products, I look forward for an opportunity to display my skills in the field of Testing & commissioning ,Operation & Maintenance and Execution of projects related to power systems.
To build up a Professional career in Corporate Communication, PR, Liaison, Corporate Marketing, Market Research, Policy Advocacy using my education, experience and skill-set.
Experience in the field of Testing and Commissioning & QA/QC of power system products, look forward for an opportunity to display my skills in the field of Testing, commissioning Operation & Maintenance and Execution of projects related to power systems
1. OMER IJAZ
Contact: (M) +966591930992 (L) +966126738720
Email: omerijaz85@gmail.com
Expert in – Testing & Commissioning | Electrical Power | Design & Protection | Strategic Planning & Analysis |
Operations Management | Testing & Execution | Relationship Management
PROFESSIONAL SYNOPSIS
Solutions focused, Meticulous and result-oriented professional offering 6 years of successful career in
Electrical arena with expertise in Testing & Commissioning
Skilled in Test Design, Development & Operations
Adept at Co-ordinating testing and commissioning activities and providing advice on testing and
commissioning procedures and documentation
Combine entrepreneurial drive with Project management skills to drive gains in revenue, market share and
profit performance
Experienced professional with superior ability to motivate personnel and enhance the overall efficiency,
performance, and compliance with standard procedures and regulations
Diligent, self motivated & motivator, committed, hard task master with excellent communication,
presentation, interpersonal and problem solving skills
C A R E E R G R A P H
Testing & Commissioning Engineer, Quality Makers, Jeddah (Aug ‘09 - Present)
Significant Highlights:
Broad exposure to Electrical & Power Engineering with Consultants & Contractors with varied positions in
Team Leading
Coordination, Execution, Operation, Testing & Commissioning, Protection, Design of 380/110/13.8kV sub-
station projects
Vast experience with manufactures ABB, Siemens Konchar, Hyundai, Schneider, Hyosung
Key Deliverables:
Greatly involved in the following areas
o High Voltage Cable & Bus
bar(13.8kV and 33kV)
o Primary injection of 13.8kV /
110kV
o Stability and sensitivity of 13.8kV
/ 110kV
o CB Timing 13.8kV / 110kV
o Earthing & Disconnector Switch
Timing Test
o All types of MCBs, Auxiliary relays.
o CT & VT Testing
o Power Transformer Test
o Stability of Power Transformer
o Compact Substation Testing
o Ring Main Unit(RMU)
o Generator Circuit Breaker
Commissioning & Erection(GCB)
o Transducers
o Close Loop
Producing or assisting in the production of all test and commissioning documentation
Undertaking testing and commissioning activities in line with the specified site requirements
Ensuring the safe testing and commissioning of completed installations to achieve the necessary plant
performance in accordance with project programme requirements
Concerned with Function tests and Final settings of all kinds of overcurrent Protection relays
Scheme of 1) LV & MV Switch gear (480V,4.16kV,13.8kV, 33kV) 2) DCDB 3) ACDB 4) GIS 110 kV (ABB, Hyosung,
Hyundai, SIEMENS)
Protection (HV, MV and LV)
o Automatic Capacitor Control
System (ACCS)
o GIS Protection (Cable Feeder,
Transformer Feeder, Bus Bar)
o Auto Bus Transfer Scheme
(ABTS)
o Automatic Voltage Regulator
o Synchro
o Protection Relay Study
2. Protection Relays
o ABB REF 615
o SPAU (110 , 130 C) (OVER &
UNDER VOLTAGE RELAY)
o SPAJ 160C (Capacitor Bank
Over Load & Unbalance
Protection Relay)
o SEL Switzer over current relay.
o Transformer Differential Relay
Areva P63xx
o General Electric Overcurrent
o SIEMENS over current and
o motor feeder protection 7SJXX
Test Sets:
o All types of Secondary & Primary injection test equipments
o FREJA 300 (PROGRAMMA) for Secondary Injection to test all Protection Relays
o OMICRON TEST UNIVERSE (CMC 156 & 256) for Sec.Injection to test all Prot.Relays
o TM1600 (PROGRAMMA) for Circuit Breaker Timing Test
o SEVERKER (750 & 760) – PROGRAMMA
o ODEN AT/2X (PROGRAMMA) for Primary Injection
Noteworthy Highlights:
Received appreciations for being a successful team leader
Awarded Best Employee of the year twice
CREDENTIALS
B.Sc (Electronics) from Bahauddinzakariya University in 2009 with 70 %
TRAININGS
Undergone training in the following areas
o Testing & working of the Protection relays
o Use of testing Equipment such as Freja, severker, omicron equipment
o Microsoft power point & project to organize the work efficiently
PERSONAL MINUTIAE
Date of Birth: 08th
November, 1985
Languages Known: English and Arabic
Mailing Address: Jeddah Aziziah
Location Preference: Jeddah, Saudi Arabia
References: Available on Request
(OMER IJAZ)