Slightly out of date but good for beginning Pi users.

2. DSI connector is on board on
the RPI. Some graphical
LCD/OLED displays might be
attached to it.
JTAGprogrammer
for Xilinx
CPLDs/FPGAs,
C2programmer
for SiLabs
C8051F
The LEDs have the
following
meanings :
ACT – D5 (Green)
– SD Card Access
PWR – D6 (Red) –
3.3 V Power is
present
FDX – D7 (Green)
– Full Duplex
(LAN) connected
LNK – D8(Green)
– Link/Activity
(LAN)
100 – D9(Yellow)
– 100Mbit (LAN)
connected

10. BTW: The Pi works with Kantronics KPC3+ too using Minicom for Packet

22. Change the
keyboard to US
startx

24. BASIC Raspbian (Wheezy) Linux Commands
sudo su
sudo raspi-config
startx
apt-get install synaptic
apt-get update
apt-get upgrade
apt-get disti-upgrade
ls
lsusb
alsamixer, alsaplayer
chmod
halt, reboot, reload
nano
sudo raspi-config
apt-get check
apt-get –f install
apt-get autoclean
apt-get autoremove
cd
dpkg, wget,
man apt-get
If you mess up, then reboot, and hit shift key
and reinstall Rasbian (Wheezy)