This document summarizes an auction of modern bakery and food processing machinery to take place on February 25, 2009. The auction will be held at Unit 2, Meadow Lane in Nottingham, UK and online bidding will also be available. Viewings of the lots will take place the day before the auction from 10am to 4pm. The auction is subject to the general conditions of Pro Auction Limited and bidders must register on auction day and provide identification and proof of ability to pay. Successful bidders must pay for and remove lots by the times specified.
1) Not all sellers are required to provide a seller's disclosure notice under Texas law, but there are advantages to providing one even when exempt.
2) A seller who has never seen the property before or has not been there in many years is still not exempt from providing a notice and should use it to refresh their memory about the property's condition.
3) Relocation companies that hold title to a property being sold are also not exempt from providing the notice and should attach any reports they have about the property's condition.
This document discusses regulations for small and medium enterprises (SMEs) regarding the issuance of specified securities. Some key points:
- SMEs with post-issue capital up to Rs. 10 crore can issue securities under this chapter. Those between Rs. 10-25 crore may also choose to do so.
- The issue must be 100% underwritten, with merchant bankers underwriting at least 15%. Nominated investors can agree to subscribe to unsubscribed portions.
- The minimum application size cannot be less than Rs. 1 lakh. At least 50 prospective allottees are needed.
- Securities will be listed on SME exchanges. Listed SMEs can migrate to
The document discusses the rules regarding sale of property in execution of a decree under Order XXI of the Code of Civil Procedure, 1908. It outlines the procedures for attachment of property, issuance of proclamation of sale, restrictions on certain persons from bidding, setting a reserve price, adjournment of sale, stopping a sale if debt is tendered, recovery from defaulting purchaser, and certification of deficit to the court. The key aim is to protect the interests of the judgment debtor and intending purchasers by providing full information and ensuring a fair sale.
This modification notice modifies certain rules for Gulf Fund Management Limited relating to property funds. Specifically, it allows for:
- Private property funds to permit unit buybacks and resales subject to certain conditions.
- Operators of private investment trust property funds to not be required to appoint an investment committee.
- Use of special purpose vehicles to hold real property for a property fund subject to conditions.
The document is the Sale of Goods Act of 1930 from India. It contains 7 chapters that define and regulate the sale of goods. Chapter 1 covers preliminary definitions. Chapter 2 covers the formation of sales contracts, including the sale of existing, future, or perishable goods. Chapter 3 covers the effects of contracts, including when property passes to the buyer. Chapter 4 covers contract performance, including delivery, acceptance, and remedies. Chapter 5 covers the rights of unpaid sellers. Chapter 6 covers breach of contract suits. Chapter 7 covers miscellaneous provisions including warranties and reasonable time. The Act establishes a comprehensive framework for sales of goods in India.
This document summarizes key procedures and considerations regarding the sale of land charged under a land office title in Malaysia. It outlines the process the chargee must take to apply for an order of sale from the Land Administrator, including an inquiry where only the chargor and chargee can attend. It also discusses differences compared to foreclosure on a registry title, the Land Administrator's limited powers, and rights of the chargor and chargee throughout the process.
This document outlines property disclosure requirements for sellers in Virginia. It notes that sellers must disclose certain property conditions to buyers, including property inspections, adjacent parcels, historic districts, resource protection areas, sex offenders, dam inundation zones, stormwater, and wastewater systems. For first-time home sales, builders must disclose known material defects. Properties near mining areas or military bases have additional disclosure rules. Buyers are advised to do due diligence on these matters.
Whyte's Rock & Pop Memorabilia Auction Saturday 31 May 2014
http://www.whytes.ie
Pop memorabilia
Rock memorabilia
Pop memorabilia auction
Rock memorabilia Auction
http://www.dominateinternetmarketing.co.uk/brochure/Whytes/20140531/20140530.html#5
1) Not all sellers are required to provide a seller's disclosure notice under Texas law, but there are advantages to providing one even when exempt.
2) A seller who has never seen the property before or has not been there in many years is still not exempt from providing a notice and should use it to refresh their memory about the property's condition.
3) Relocation companies that hold title to a property being sold are also not exempt from providing the notice and should attach any reports they have about the property's condition.
This document discusses regulations for small and medium enterprises (SMEs) regarding the issuance of specified securities. Some key points:
- SMEs with post-issue capital up to Rs. 10 crore can issue securities under this chapter. Those between Rs. 10-25 crore may also choose to do so.
- The issue must be 100% underwritten, with merchant bankers underwriting at least 15%. Nominated investors can agree to subscribe to unsubscribed portions.
- The minimum application size cannot be less than Rs. 1 lakh. At least 50 prospective allottees are needed.
- Securities will be listed on SME exchanges. Listed SMEs can migrate to
The document discusses the rules regarding sale of property in execution of a decree under Order XXI of the Code of Civil Procedure, 1908. It outlines the procedures for attachment of property, issuance of proclamation of sale, restrictions on certain persons from bidding, setting a reserve price, adjournment of sale, stopping a sale if debt is tendered, recovery from defaulting purchaser, and certification of deficit to the court. The key aim is to protect the interests of the judgment debtor and intending purchasers by providing full information and ensuring a fair sale.
This modification notice modifies certain rules for Gulf Fund Management Limited relating to property funds. Specifically, it allows for:
- Private property funds to permit unit buybacks and resales subject to certain conditions.
- Operators of private investment trust property funds to not be required to appoint an investment committee.
- Use of special purpose vehicles to hold real property for a property fund subject to conditions.
The document is the Sale of Goods Act of 1930 from India. It contains 7 chapters that define and regulate the sale of goods. Chapter 1 covers preliminary definitions. Chapter 2 covers the formation of sales contracts, including the sale of existing, future, or perishable goods. Chapter 3 covers the effects of contracts, including when property passes to the buyer. Chapter 4 covers contract performance, including delivery, acceptance, and remedies. Chapter 5 covers the rights of unpaid sellers. Chapter 6 covers breach of contract suits. Chapter 7 covers miscellaneous provisions including warranties and reasonable time. The Act establishes a comprehensive framework for sales of goods in India.
This document summarizes key procedures and considerations regarding the sale of land charged under a land office title in Malaysia. It outlines the process the chargee must take to apply for an order of sale from the Land Administrator, including an inquiry where only the chargor and chargee can attend. It also discusses differences compared to foreclosure on a registry title, the Land Administrator's limited powers, and rights of the chargor and chargee throughout the process.
This document outlines property disclosure requirements for sellers in Virginia. It notes that sellers must disclose certain property conditions to buyers, including property inspections, adjacent parcels, historic districts, resource protection areas, sex offenders, dam inundation zones, stormwater, and wastewater systems. For first-time home sales, builders must disclose known material defects. Properties near mining areas or military bases have additional disclosure rules. Buyers are advised to do due diligence on these matters.
Whyte's Rock & Pop Memorabilia Auction Saturday 31 May 2014
http://www.whytes.ie
Pop memorabilia
Rock memorabilia
Pop memorabilia auction
Rock memorabilia Auction
http://www.dominateinternetmarketing.co.uk/brochure/Whytes/20140531/20140530.html#5
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
buy old yahoo accounts buy yahoo accountsSusan Laney
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
buy old yahoo accounts buy yahoo accountsSusan Laney
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
2024 State of Marketing Report – by HubspotMarius Sescu
https://www.hubspot.com/state-of-marketing
· Scaling relationships and proving ROI
· Social media is the place for search, sales, and service
· Authentic influencer partnerships fuel brand growth
· The strongest connections happen via call, click, chat, and camera.
· Time saved with AI leads to more creative work
· Seeking: A single source of truth
· TLDR; Get on social, try AI, and align your systems.
· More human marketing, powered by robots
ChatGPT is a revolutionary addition to the world since its introduction in 2022. A big shift in the sector of information gathering and processing happened because of this chatbot. What is the story of ChatGPT? How is the bot responding to prompts and generating contents? Swipe through these slides prepared by Expeed Software, a web development company regarding the development and technical intricacies of ChatGPT!
Product Design Trends in 2024 | Teenage EngineeringsPixeldarts
The realm of product design is a constantly changing environment where technology and style intersect. Every year introduces fresh challenges and exciting trends that mold the future of this captivating art form. In this piece, we delve into the significant trends set to influence the look and functionality of product design in the year 2024.
How Race, Age and Gender Shape Attitudes Towards Mental HealthThinkNow
Mental health has been in the news quite a bit lately. Dozens of U.S. states are currently suing Meta for contributing to the youth mental health crisis by inserting addictive features into their products, while the U.S. Surgeon General is touring the nation to bring awareness to the growing epidemic of loneliness and isolation. The country has endured periods of low national morale, such as in the 1970s when high inflation and the energy crisis worsened public sentiment following the Vietnam War. The current mood, however, feels different. Gallup recently reported that national mental health is at an all-time low, with few bright spots to lift spirits.
To better understand how Americans are feeling and their attitudes towards mental health in general, ThinkNow conducted a nationally representative quantitative survey of 1,500 respondents and found some interesting differences among ethnic, age and gender groups.
Technology
For example, 52% agree that technology and social media have a negative impact on mental health, but when broken out by race, 61% of Whites felt technology had a negative effect, and only 48% of Hispanics thought it did.
While technology has helped us keep in touch with friends and family in faraway places, it appears to have degraded our ability to connect in person. Staying connected online is a double-edged sword since the same news feed that brings us pictures of the grandkids and fluffy kittens also feeds us news about the wars in Israel and Ukraine, the dysfunction in Washington, the latest mass shooting and the climate crisis.
Hispanics may have a built-in defense against the isolation technology breeds, owing to their large, multigenerational households, strong social support systems, and tendency to use social media to stay connected with relatives abroad.
Age and Gender
When asked how individuals rate their mental health, men rate it higher than women by 11 percentage points, and Baby Boomers rank it highest at 83%, saying it’s good or excellent vs. 57% of Gen Z saying the same.
Gen Z spends the most amount of time on social media, so the notion that social media negatively affects mental health appears to be correlated. Unfortunately, Gen Z is also the generation that’s least comfortable discussing mental health concerns with healthcare professionals. Only 40% of them state they’re comfortable discussing their issues with a professional compared to 60% of Millennials and 65% of Boomers.
Race Affects Attitudes
As seen in previous research conducted by ThinkNow, Asian Americans lag other groups when it comes to awareness of mental health issues. Twenty-four percent of Asian Americans believe that having a mental health issue is a sign of weakness compared to the 16% average for all groups. Asians are also considerably less likely to be aware of mental health services in their communities (42% vs. 55%) and most likely to seek out information on social media (51% vs. 35%).
AI Trends in Creative Operations 2024 by Artwork Flow.pdfmarketingartwork
Creative operations teams expect increased AI use in 2024. Currently, over half of tasks are not AI-enabled, but this is expected to decrease in the coming year. ChatGPT is the most popular AI tool currently. Business leaders are more actively exploring AI benefits than individual contributors. Most respondents do not believe AI will impact workforce size in 2024. However, some inhibitions still exist around AI accuracy and lack of understanding. Creatives primarily want to use AI to save time on mundane tasks and boost productivity.
Organizational culture includes values, norms, systems, symbols, language, assumptions, beliefs, and habits that influence employee behaviors and how people interpret those behaviors. It is important because culture can help or hinder a company's success. Some key aspects of Netflix's culture that help it achieve results include hiring smartly so every position has stars, focusing on attitude over just aptitude, and having a strict policy against peacocks, whiners, and jerks.
PEPSICO Presentation to CAGNY Conference Feb 2024Neil Kimberley
PepsiCo provided a safe harbor statement noting that any forward-looking statements are based on currently available information and are subject to risks and uncertainties. It also provided information on non-GAAP measures and directing readers to its website for disclosure and reconciliation. The document then discussed PepsiCo's business overview, including that it is a global beverage and convenient food company with iconic brands, $91 billion in net revenue in 2023, and nearly $14 billion in core operating profit. It operates through a divisional structure with a focus on local consumers.
Content Methodology: A Best Practices Report (Webinar)contently
This document provides an overview of content methodology best practices. It defines content methodology as establishing objectives, KPIs, and a culture of continuous learning and iteration. An effective methodology focuses on connecting with audiences, creating optimal content, and optimizing processes. It also discusses why a methodology is needed due to the competitive landscape, proliferation of channels, and opportunities for improvement. Components of an effective methodology include defining objectives and KPIs, audience analysis, identifying opportunities, and evaluating resources. The document concludes with recommendations around creating a content plan, testing and optimizing content over 90 days.
How to Prepare For a Successful Job Search for 2024Albert Qian
The document provides guidance on preparing a job search for 2024. It discusses the state of the job market, focusing on growth in AI and healthcare but also continued layoffs. It recommends figuring out what you want to do by researching interests and skills, then conducting informational interviews. The job search should involve building a personal brand on LinkedIn, actively applying to jobs, tailoring resumes and interviews, maintaining job hunting as a habit, and continuing self-improvement. Once hired, the document advises setting new goals and keeping skills and networking active in case of future opportunities.
A report by thenetworkone and Kurio.
The contributing experts and agencies are (in an alphabetical order): Sylwia Rytel, Social Media Supervisor, 180heartbeats + JUNG v MATT (PL), Sharlene Jenner, Vice President - Director of Engagement Strategy, Abelson Taylor (USA), Alex Casanovas, Digital Director, Atrevia (ES), Dora Beilin, Senior Social Strategist, Barrett Hoffher (USA), Min Seo, Campaign Director, Brand New Agency (KR), Deshé M. Gully, Associate Strategist, Day One Agency (USA), Francesca Trevisan, Strategist, Different (IT), Trevor Crossman, CX and Digital Transformation Director; Olivia Hussey, Strategic Planner; Simi Srinarula, Social Media Manager, The Hallway (AUS), James Hebbert, Managing Director, Hylink (CN / UK), Mundy Álvarez, Planning Director; Pedro Rojas, Social Media Manager; Pancho González, CCO, Inbrax (CH), Oana Oprea, Head of Digital Planning, Jam Session Agency (RO), Amy Bottrill, Social Account Director, Launch (UK), Gaby Arriaga, Founder, Leonardo1452 (MX), Shantesh S Row, Creative Director, Liwa (UAE), Rajesh Mehta, Chief Strategy Officer; Dhruv Gaur, Digital Planning Lead; Leonie Mergulhao, Account Supervisor - Social Media & PR, Medulla (IN), Aurelija Plioplytė, Head of Digital & Social, Not Perfect (LI), Daiana Khaidargaliyeva, Account Manager, Osaka Labs (UK / USA), Stefanie Söhnchen, Vice President Digital, PIABO Communications (DE), Elisabeth Winiartati, Managing Consultant, Head of Global Integrated Communications; Lydia Aprina, Account Manager, Integrated Marketing and Communications; Nita Prabowo, Account Manager, Integrated Marketing and Communications; Okhi, Web Developer, PNTR Group (ID), Kei Obusan, Insights Director; Daffi Ranandi, Insights Manager, Radarr (SG), Gautam Reghunath, Co-founder & CEO, Talented (IN), Donagh Humphreys, Head of Social and Digital Innovation, THINKHOUSE (IRE), Sarah Yim, Strategy Director, Zulu Alpha Kilo (CA).
Trends In Paid Search: Navigating The Digital Landscape In 2024Search Engine Journal
The search marketing landscape is evolving rapidly with new technologies, and professionals, like you, rely on innovative paid search strategies to meet changing demands.
It’s important that you’re ready to implement new strategies in 2024.
Check this out and learn the top trends in paid search advertising that are expected to gain traction, so you can drive higher ROI more efficiently in 2024.
You’ll learn:
- The latest trends in AI and automation, and what this means for an evolving paid search ecosystem.
- New developments in privacy and data regulation.
- Emerging ad formats that are expected to make an impact next year.
Watch Sreekant Lanka from iQuanti and Irina Klein from OneMain Financial as they dive into the future of paid search and explore the trends, strategies, and technologies that will shape the search marketing landscape.
If you’re looking to assess your paid search strategy and design an industry-aligned plan for 2024, then this webinar is for you.
5 Public speaking tips from TED - Visualized summarySpeakerHub
From their humble beginnings in 1984, TED has grown into the world’s most powerful amplifier for speakers and thought-leaders to share their ideas. They have over 2,400 filmed talks (not including the 30,000+ TEDx videos) freely available online, and have hosted over 17,500 events around the world.
With over one billion views in a year, it’s no wonder that so many speakers are looking to TED for ideas on how to share their message more effectively.
The article “5 Public-Speaking Tips TED Gives Its Speakers”, by Carmine Gallo for Forbes, gives speakers five practical ways to connect with their audience, and effectively share their ideas on stage.
Whether you are gearing up to get on a TED stage yourself, or just want to master the skills that so many of their speakers possess, these tips and quotes from Chris Anderson, the TED Talks Curator, will encourage you to make the most impactful impression on your audience.
See the full article and more summaries like this on SpeakerHub here: https://speakerhub.com/blog/5-presentation-tips-ted-gives-its-speakers
See the original article on Forbes here:
http://www.forbes.com/forbes/welcome/?toURL=http://www.forbes.com/sites/carminegallo/2016/05/06/5-public-speaking-tips-ted-gives-its-speakers/&refURL=&referrer=#5c07a8221d9b
ChatGPT and the Future of Work - Clark Boyd Clark Boyd
Everyone is in agreement that ChatGPT (and other generative AI tools) will shape the future of work. Yet there is little consensus on exactly how, when, and to what extent this technology will change our world.
Businesses that extract maximum value from ChatGPT will use it as a collaborative tool for everything from brainstorming to technical maintenance.
For individuals, now is the time to pinpoint the skills the future professional will need to thrive in the AI age.
Check out this presentation to understand what ChatGPT is, how it will shape the future of work, and how you can prepare to take advantage.
The document provides career advice for getting into the tech field, including:
- Doing projects and internships in college to build a portfolio.
- Learning about different roles and technologies through industry research.
- Contributing to open source projects to build experience and network.
- Developing a personal brand through a website and social media presence.
- Networking through events, communities, and finding a mentor.
- Practicing interviews through mock interviews and whiteboarding coding questions.
Google's Just Not That Into You: Understanding Core Updates & Search IntentLily Ray
1. Core updates from Google periodically change how its algorithms assess and rank websites and pages. This can impact rankings through shifts in user intent, site quality issues being caught up to, world events influencing queries, and overhauls to search like the E-A-T framework.
2. There are many possible user intents beyond just transactional, navigational and informational. Identifying intent shifts is important during core updates. Sites may need to optimize for new intents through different content types and sections.
3. Responding effectively to core updates requires analyzing "before and after" data to understand changes, identifying new intents or page types, and ensuring content matches appropriate intents across video, images, knowledge graphs and more.
A brief introduction to DataScience with explaining of the concepts, algorithms, machine learning, supervised and unsupervised learning, clustering, statistics, data preprocessing, real-world applications etc.
It's part of a Data Science Corner Campaign where I will be discussing the fundamentals of DataScience, AIML, Statistics etc.
Time Management & Productivity - Best PracticesVit Horky
Here's my presentation on by proven best practices how to manage your work time effectively and how to improve your productivity. It includes practical tips and how to use tools such as Slack, Google Apps, Hubspot, Google Calendar, Gmail and others.
The six step guide to practical project managementMindGenius
The six step guide to practical project management
If you think managing projects is too difficult, think again.
We’ve stripped back project management processes to the
basics – to make it quicker and easier, without sacrificing
the vital ingredients for success.
“If you’re looking for some real-world guidance, then The Six Step Guide to Practical Project Management will help.”
Dr Andrew Makar, Tactical Project Management
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
Nottingham
1. Live & Webcast
On the instructions of a major
food manufacturer & retained client
Piecemeal
(subject to Conditions of Sale and
unless previously sold)
MODERN BAKERY & FOOD
PROCESSING MACHINERY
Bidding closes on:
Wednesday 25th February 2009
at 11.00am prompt
Viewing:
Tuesday 24th February 2009
from 10am to 4pm
At:
Unit 2, Meadow Lane, Nottingham,
Nottinghamshire, East Midlands NG2 3HD
Photographs and timed online bids via
www.bidspotter.com
www.proauction.ltd.uk
Email: info@proauction.ltd.uk Facsimile: 0845 280 2492
2. GENERAL CONDITIONS OF SALE
(as approved by The Royal Institution of Chartered Surveyors)
1 Application of these General itions the time specified in clause 6.3 above (or any extension
case without being required to give a reason.
1.1 In these general conditions the expression “the granted under clause 6.4 above), or to remove any Lot by
5.10The Auctioneer shall in every other respect decide
Auctioneer” includes his employees and agents and any the time specified in clause 7.3 above (or any extension
how the Auction is to be conducted and without being
person to whom conduct of the Auction is delegated under granted under clause 7.4 above) the Auctioneer may
required to give a reason.
clause 5.11 below. rescind the Sale of that Lot, in which case any deposit
5.11 The Auctioneer may in his sole discretion delegate to
1.2 These General Conditions apply to every Auction of shall be forfeit, and that Lot may be resold by auction or
a person whom he believes to be competent the conduct
Plant and Machinery, Chattels, Trade Stocks and Vehicles privately.
of the Auction in accordance with these General
conducted by the Auctioneer and to any Lot offered for 8.2 If the Auctioneer has rescinded the sale but the Buyer
Conditions
sale in the Auction whether that Lot includes property fixed has removed the Lot bought, the Auctioneer shall be
6 After the Sale
to land or not fixed to land or any other personal property. entitled without previous notice to enter upon any
6.1 Upon the Auctioneer declaring any Lot sold, the buyer
1.3 If these General Conditions have not previously been premises where he believes the Lot to be and remove it.
shall immediately:-
accepted by a person attending or bidding at an Auction, 8.3 If the Auctioneer has rescinded the sale and the Lot
(a) give the Auctioneer his name and address and if
bidding for any Lot in the Auction shall be deemed to be has been resold, the Buyer shall make good any
requested his proof of identity;
an acceptance by the Bidder of these General Conditions. deficiency, namely:-
(b) identify any person on whose behalf he has bought;
1.4 To the extent that these General Conditions are (a) the sale price less the resale price;
(c) pay to the Auctioneer if requested a deposit of up to
inconsistent with any special conditions set out or referred (b) the costs of and incidental to resale.
25 per cent of the price.
to in the Auction Catalogue or announced at the Auction, 8.4 If because the Buyer has failed to remove any Lot by
6.2 Within the time specified in clause 6.3 below, the
the special conditions shall prevail. the time specified in clause 7.3 above (or any extension
Buyer shall pay the following sums to the Auctioneer in
1.5 These General Conditions shall be governed granted under clause 7.4 above), the Seller is unable to
full:-
construed and enforced in accordance with the law of give vacant possession on disposing of or relinquishing
(a) the balance of the price of all Lots purchased together
England, but:- any interest in the premises from which the Lot should
with any VAT due;
(a) if the Auction is held in Scotland, in accordance with have been removed, the Buyer shall compensate the
(b) the value as summarily determined by the Auctioneer,
the law of Scotland; Seller for any loss resulting.
whose determination shall be final and binding, of all or
(b) if the Auction is held in Northern Ireland, in 9. Liabilities and Indemnities
part of any Lot or of the premises where the Auction is
accordance with the law in Northern Ireland. 9.1 The Auctioneer warrants that he believes that the
held which has been damaged or destroyed by the Buyer
2. The Seller’s Instructions and Warranties Seller of each Lot is able to pass good title, and if the
or his principal or agent.
2.1 The Seller warrants that:-( Seller is not able to do so, the Auctioneer shall use his
6.3 The time for complying with clause 6.2 above shall be
a) to any Lot offered for sale he will be able to pass good reasonable endeavours to assist the Buyer in obtaining
the time specified in the Auction catalogue or if no time is
and unencumbered title free from third party claims; good title and in pursuing any remedies the Buyer might
specified there, 4pm on the next working day, and in every
(b) any Lot offered for sale may lawfully sold; have against the Seller, but the Auctioneer shall not be
case time shall be of the essence.
(c) the premises where the Auction is to be held (if not bound to initiate litigation and shall not be under any other
6.4 The Auctioneer may at any time in his sole discretion
the Auctioneer’s premises) will be safe for that purpose obligation to the Buyer.
grant the Buyer an extension of time for complying with
and that it will be lawful to hold the Auction there. 9.2 Every Lot is sold as seen and where lying.
clause 6.2 above, in which case the Buyer shall pay the
2.2 If the Seller’s instructions are given by the Seller’s 9.3 No Lot is sold as compromising or including any new
Auctioneer in full before moving or removing the Lot
agent, the Seller’s agent warrants that he has the Seller’s goods.
interest on any unpaid sums at a rate of 4 per cent above
authority:- 9.4 The Auctioneer neither has nor professes any expert
Barclays Bank Plc base rate in force from time to time.
(a) to instruct the Auctioneer; or other knowledge of any Lot sold and is hereby excluded
6.5 Until the Buyer has complied with clause 6.2 above:-
(b) to give the warranties set out in clause 2.1 above; any liability the Auctioneer might otherwise incur and any
(a) title to any Lot bought shall not pass to the Buyer;
(c) to instruct the Auctioneer to act in accordance with right or immunity the Buyer might otherwise possess in
(b) the Lot shall be at the Buyer’s risk;
these General Conditions and any special conditions. respect of any conditions warranties or representations
(c) the Auctioneer shall have a lien over any Lot bought
3. The Auctioneer’s Remuneration relating to the condition of any Lot sold or the
by the Buyer in the Auction;
3.1 The Auctioneer’s remuneration shall be such as has merchantable quality of the Lot or its fitness for the
(d) if the Buyer effects or purports to effect a resale or
been agreed between the Seller and the Auctioneer. particular or any purpose for which it is or may be required
any other disposition of all or part of the Lot, the Buyer
3.2 The Auctioneer may deduct his remuneration from whether such conditions warranties or representations are
shall hold the proceeds of resale or other disposition on
monies received from Buyers before accounting to the expressed or implied in the Auction Catalogue or are the
trust for the Auctioneer and Seller.
Seller for the balance. subject of oral or written statements made by or on behalf
6.6 On written request by the Buyer the Auctioneer shall
4. Bidding on behalf of Another of the Auctioneer or any other person before or in the
provide a VAT invoice in proper form, if appropriate.
4.1 Unless the Auctioneer has previously acknowledged course of the Auction.
7. Removal of the Lot bought
in writing that the bidder bids as agent on behalf of a 9.5 No liability shall attach to the Auctioneer either in
7.1 The Buyer may not remove any Lot he has bought
named principal, every bidder shall be taken to bid on his contract or in tort for loss, injury or damage legal or other
until after the end of the Auction.
own behalf as principal. expenses sustained by the Seller, any Bidder, the Buyer
7.2 The Buyer may not remove any Lot until the Buyer
4.2 If the Auctioneer has earlier acknowledged in writing or any other person by reason of:-
has paid the sums specified in clause 6.2 above in full for
that the Bidder bids as agent on behalf of a named (a) any defect in any Lot sold, whether or not such defect
every Lot he has bought.
principal, the Bidder warrants that he has the authority of be latent or apparent on examination;
7.3 After paying the sums specified in clause 6.2 above,
his principal to make each bid he makes. (b) any defect or danger of the premises where the
the Buyer must remove the Lot bought by the time
5. Conduct of the Auction Auction is held;
specified in the Auction Catalogue or if no time is specified
5.1 The Auctioneer offers each Lot as agent of the Seller (c) any alleged failure of the Auctioneer to properly
there, 5pm on the next working day, and in every case
and not as principal unless otherwise indicated in the advertise the Auction or to seek or obtain expert legal
time shall be of the essence.
Auction Catalogue. advice with regard to any Lot offered for sale or its reserve
7.4 The Auctioneer may at any time at his sole discretion
5.2 Any Lot may be subject to a reserve price unless price;
and on terms specified by him grant the Buyer an
otherwise indicated in the Auction Catalogue. (d) any act or omission of the Auctioneer in the conduct
extension of the time specified in clause 7.3 above.
5.3 The Seller or his representative or the Auctioneer on of the Auction or after the Auction;
7.5 If the Lot bought is or includes a motor vehicle, no
his behalf may bid for any Lot unless otherwise indicated (e) any act or omission of any person other than the
warranty is given that the vehicle may safely or lawfully be
in the Auction Catalogue. Auctioneer.
driven on the road.
5.4 The Auctioneer may at any time before the fall of the 9.6 The Seller shall indemnify the Auctioneer in respect of
7.6 When removing any Lot the Buyer:-
hammer withdraw or divide any Lot or combine any Lots. any claims made by another or third party for any loss
(a) is responsible for detaching any Lot fixed to land and
5.5 With the previous consent of the Seller, the injury damage or legal or other expenses referred to in
must do so safely and lawfully and must not use flame
Auctioneer may sell any Lot by private sale before or after clause 9.5 above.
cutters, explosives or any other dangerous equipment or
the Auction. 9.7 The Auctioneer shall not be liable to indemnify the
process without previous written permission signed by or
5.6 The Auctioneer may require any Bidder to give his Seller or any Bidder or the Buyer in respect of any claims
on behalf of the Auctioneer;
name and address and proof of identity before accepting made by another or third party for any loss injury damage
(b) must use safe and lawful means of removing the Lot;
a bid. or legal or other expenses referred to in clause 9.5 above.
(c) shall indemnify the Auctioneer and Seller against any
5.7 The Auctioneer may reject any bid at his sole 9.8 Clauses 9.3 to 9.7 shall not be valid insofar as
loss damage legal or other expenses and any claim
discretion and without being required to give a reason. prohibited by statute.
arising from the detaching of the Lot or its removal.
5.8 The Buyer shall be the person who made the highest 9.9 In no circumstances shall the Auctioneers be liable for
(d) shall have insurance in respect of such indemnity and
bid before the fall of the hammer or such other person as any consequential damage.
shall on request produce to the Auctioneer a receipt for
the Auctioneer may declare to be Buyer without being 10. Waiver
the last premium due or other sufficient evidence that
required to give a reason. 10.1No indulgence shown by the Auctioneer shall prevent
such insurance has been effected and remains in force.
5.9 The Auctioneer may decide whether there is a the Auctioneer or the Seller from subsequently insisting
8. Default by the Buyer
dispute between Bidders, may summarily determine the upon their respective rights and remedies.
8.1 If at any time the Buyer has failed either to pay the
dispute or immediately again offer the Lot for sale, in each sums specified in clause 6.2 above in full by the expiry of
Pro Auction Limited
Unit 5, Midsomer Enterprise Park, Radstock Road, Bath, BA1 6LD United Kingdom
Tel: +44(0)1761 414000 Fax: +44(0)845 280 2492 Email: info@proauction.ltd.uk Website: www.proauction.ltd.uk
Company Registration no: 5059610
2
3. SPECIAL NOTES & CONDITIONS Modern Bakery & Food
(to be read in conjunction with the General Conditions of Sale
Processing Machinery
as approved by The Royal Institution of Chartered Surveyors)
public liability cover and proof of cover must be
Purchasers should be aware of the above and
VIEWING Viewing is by arrangement with the
produced before work commences.
comply as appropriate, they should attend at the
auctioneers.
beginning of the auction to hear the Auctioneers
Lots must be insured by the purchaser from the fall
opening announcements regarding formal
Viewing at: Unit 2, Meadow Lane,
of the hammer, no responsibility whatsoever will
requirements it is also important that all
Nottingham, Nottinghamshire, East
rest with the Auctioneer or Vendor in the event of
purchasers/contractors comply with site rules, site
Midlands NG2 3HD
any loss suffered.
procedures and Health & Safety Regulations.
REGISTRATION Prospective purchasers must The Purchaser or his Contractor will also ensure
Purchasers are deemed to have listened to the
register and obtain a buyer’s number when that employers liability cover in the sum of TEN
Auctioneers opening announcements which may
entering the site on Sale Day in order to be a MILLION POUNDS (£10,000,000) is in place.
include amendments and/or additions to the
successful bidder. A REQUIREMENT OF SUCH Conditions of Sale.
REGISTRATION WILL BE PHOTOGRAPHIC AND CONTENTS All items in, under, over and around
PROOF OF ABILITY TO PAY FOR POTENTIAL any lot in this catalogue are not included with such
Unless specifically excluded purchasers of lots will
PURCHASES, (PASSPORT, DRIVING LICENCE). lot unless stated in the catalogue description or by
be required to make good holes or voids exposed
The Auctioneers reserve the right to refuse the Auctioneer
by the removal of lots.
admission.
DOCUMENTS The Vendors/Agents/Auctioneers
HAZARDOUS MATERIALS & SUBSTANCES If
Persons under the age of 16 will not be allowed reserve the right to remove any documents they
any hazardous materials or substances are to be
on site. may require from the lot prior to the sale or at any
removed or disposed of then such disposal will be
later date.
the responsibility of the purchaser, but in
PAYMENT All lots must be paid and cleared for accordance with all current Environmental
before prior to removal by Cash, Banker’s Draft, SOFTWARE Title to computer Software is not
Legislation and the Vendors procedures and audit
credit or debit card or Cheque supported by an transferred and use is subject to any licence or
requirements. Cladding taken off buildings for
appropriate Banker’s Letter stating that the Bank copyright restrictions and user conditions.
removal of plant & equipment will have to be
will HONOUR your cheque and the limit up to replaced, unless otherwise specified by the
which they are willing to do so, unless The Vendors/Agents/Auctioneers reserve the right
Auctioneer.
otherwise agreed. to erase any private or sensitive information prior to
delivery or at any later date
COMPLIANCE WITH LAWS, REGULATIONS
V.A.T. V.A.T. will be added to sale bills at 15%. AND PLANNING Purchasers or their Removal
Special rules apply for sales for export – request INSPECTION & CONDITION: The articles may be
Contractors are responsible for applying for
information from the auctioneer inspected at the times and place set out in the
relevant planning permissions (if appropriate) with
Catalogue. Each buyer (whether or not he inspects
reference to the removal of building structures and
BUYERS PREMIUM Buyer’s Premium of 15% those articles which he purchases) shall be
plant housings.
plus V.A.T. will be added to purchasers bills. The deemed to buy with notice of all defects in them. No
Buyers Premium will relate to any sales which buyer shall have the right to reject for any reason
Purchasers or their Contractors shall at all times
might take place prior to the auction, during the any articles which he may purchase. Every express
comply with all orders, regulations, requirements
auction and after the auction and indeed to any or implied warranty or condition as to
and rules of any authority whether Parliamentary,
Private Treaty Sales of items not included in the merchantability, condition or fitness for purpose of
statutory, parochial or local and in particular shall
auction. any of the articles is excluded.
comply with all requirements applicable to the
employment by them of labour or otherwise
DEPOSITS The Auctioneer reserves the right to UNSOLD LOTS If any lot or item is unsold and has
affecting the work.
take a 25% deposit at Point of Sale. Purchasers to be dismantled & lowered to allow the removal of
are reminded to leave a 25% deposit before any other lot, then such dismantling & lowering
The Purchasers or their Contractors shall in
leaving site on sale day. Payment in full must be shall be the responsibility of the purchaser of the
addition and without prejudice to the generality of
made within 24 hours of the sale. relevant Lot(s) or Item(s).
the foregoing conform to the regulations and
byelaws of local authorities and shall pay all fees
ABSENT BUYING INSTRUCTIONS If you cannot CONDITIONAL SALES Please note the
and charges arising under the said regulations and
attend the sale we will execute bids Auctioneer reserves the right to effect conditional
byelaws in respect of the Work.
confidentially on your behalf. sales on certain lots.
For absent bids indicate your limit for each lot, ELECTRIC CABLE/PALLETS Electric cable and
Your bids will be executed at the lowest prices The Auctioneer reserves the right to rescind the
pallets are not included with the sale of any lots
allowed by reserves and other bids. sale of lot(s) if purchasers or their contractors fail to
unless otherwise indicated.
A buyers premium plus applicable charges & provide a satisfactory Method Statement in
taxes, is payable on successful bids. accordance with current Health & Safety
ORDER OF REMOVAL Buyers should co-operate
Absentee and telephone bids are accepted at Regulations(or if their transport arrangements are
regarding order of removal in order to comply with
your risk, and are subject to the Terms & considered unsuitable).
the clearance date. If it transpires that a purchaser
Conditions of sale and any Special Conditions makes no effort to commence dismantling and the
relating to the auction. RESERVES Where applicable, Lots will be offered
particular item of plant is preventing other buyers
Please submit your bids not later than 4 hours subject to reserve prices.
from removing equipment, then the Auctioneer
prior to the sale commencing, you will receive reserves the right to insist that removal take place
confirmation of receipt. 25% deposit required LOTS with a quantity greater than 1 shall be offered
immediately notwithstanding the final clearance
on composite total of bids. on an individual basis – the highest bidder shall
date.
have the option, at the auctioneers discretion, to bid
REMOVAL All lots which are subject to a lift-out for 1 or all of the quantity available.
If in the event the purchaser does not comply, then
charge are detailed on an information sheet the Auctioneer reserves the right to arrange for the
available from the Sale’s pay office, where removal of the lot or lots and charge any attendant
applicable the charges are mandatory. Goods to costs to the purchaser.
be removed from site by Friday 6th March 2009 by
4.00pm. INSURANCE The Auctioneers remind prospective
bidders of Condition 7 of the Conditions of Sale.
SITE PROCEDURE The Vendor or Pro Auctions Any buyers of fixed plant or their duly appointed
Limited are not liable for, nor accept any contractors MUST consult with the Auctioneers duly
responsibility for any injury, loss or damage to appointed representative, prior to commencing
persons or property sustained whilst on site. WARNING
removal. Written consent to commence dismantling
HEALTH & SAFETY LEGISLATION AND will be required. It should also be noted that all It is a criminal offence to form a ring at auction
CONSTRUCTION, DESIGN AND MANAGEMENT or to induce another to abstain from bidding.
dismantling contractors working on site must be
REGULATIONS 1994. insured for at least two million pounds (£2,000,000)
Pro Auction Limited
Unit 5, Midsomer Enterprise Park, Radstock Road, Bath, BA1 6LD United Kingdom
Tel: +44(0)1761 414000 Fax: +44(0)845 280 2492 Email: info@proauction.ltd.uk Website: www.proauction.ltd.uk
Company Registration no: 5059610
3
4. Please note all capacities, dimensions and dates of
manufacture are approximate and potential purchasers
should make their own inspection for verification.
MANNER OF OFFERING In order to assist prospective purchasers the plant has been broken down into individual lots for
identification purposes. The auctioneer has absolute discretion regarding the offering of the lots and may offer lots as a group or
consolidated lots, but where possible prospective purchasers wishing to bid for individual lots will be accommodated.
LOT No. DESCRIPTION NOTES
1 Rademaker Mohno pump depositor suitable for discontinuous or continuous fillings on 6 rows,
on stainless frame with hopper (s/n 5248-714) YOM 1999
2 WMH Western Mechanical Handling Western Mechanical Handling automatic 36 head custard
depositor (s/n 4042-OOCL-002)
3 Rutland Handling Packaging Systems variable speed neoprene belt conveyor 5000mm x
370mm (s/n 4062) YOM 1993
4 Seal SHD1050 Excella heated illuminated display case toughened glass front for safety In-built
humidifying function extends food holding times 40mm deep GN dishes supplied h 510mm x
w 1050mm x d 750mm Power: 2200w
5 Herbert LA2600 conveyorised single head label applicator (s/n 98050213)
6 PALS model SE100 model FL05LCLABHR label applicator (s/n LCAR274) YOM 2004
7 Herma H400 - V16L label applicator reels with an outer diameter of 300 mm and a score
diameter of 3”/76 mm. speed 40 m/min (s/n 9907064)
8 PALS model FL05LCLAVHR (s/n 2895850) YOM 1996
9 DC Norris model 300 portable elevated neoprene belt conveyor on stainless steel frame
2500mm x 300mm discharges at 2000mm (s/n N1626) YOM 2001
10 Collette multi-purpose mixer, Cap: 300 L, Model: SM-300, stainless steel bowl, 1 timer,
2 speeds, 380v, 3ph, 50Hz
11 Collette multi-purpose mixer, Cap: 300 L, Model: SM-300, stainless steel bowl, 1 timer,
2 speeds, 380v, 3ph, 50Hz
11a Oddy pinner finger roll moulder
11b Tweedy T35X mixer
12 Pair off neoprene variable speed belt conveyor 2700mm x 460mm
13 Pair off neoprene variable speed belt conveyor 2700mm x 460mm
14 Pair off neoprene variable speed belt conveyor 2700mm x 460mm
15 Pair off neoprene variable speed belt conveyor 2700mm x 460mm
16 Bartlett E15 gas fired four rack (500mm x 340mm) convection oven (s/n WA1328)
17 Tom Chandley C530-8 electric five rack (740mm x 460mm) bake off oven YOM 1995
17a Double D Revair 3 rack through door steam cooker gas fired dry heat YOM 1999
17b Double D Revair 3 rack through door steam cooker gas fired dry heat YOM 1999
17c Double D Revair 3 rack through door steam cooker gas fired dry heat YOM 1999
17d Double D Revair 3 rack through door steam cooker gas fired dry heat YOM 1999
17e Double D six rack multipurpose cooker with MPC (d/n CR-W-8243)
18 BGL Barrat Gray Krefft KGX 20.21 gastronorm oven electric (E22MA98031014) YOM 2007
19 BGL Barrat Gray Krefft KGX 20.21 gastronorm oven electric (E22MA98031015) YOM 2007
20 Mono FG126 conveyor fed bread slicer 20mm cut (s/n 070054566)
21 Mono TGC380-2 bread slicer table top 10mm cut (91G3305)
22 Hsianlin HL52001 Harvester bread slicer 13mm cut (s.n 99020266) YOM 1999
23 Digi model DS470SS 6kg platform scale (s/n 02411744)
24 Silverline model 3250 5kg platform scale
25 Salter Brecknell C3265 3kg platform scale (s/n 013843)
26 Salter Brecknell C3265 3kg platform scale (s/n 014054)
27 John Hunt Duratax CKS301.4 mixer 60 quart 3 speed planetary mixer with bowl and tools
28 Dahlen 3-phase 4-deck eight tray oven steel decks 150mm maximum clearance
29 2E Ellgard Equipment A/S model B48 water mixer (s/n 86050078)
30 Arcall spray glazer
31 Flowtronic FPL food pump model HE555TSTSRJT 7 bar on stainless mobile frame with
1000mm diameter hopper
4
5. LOT No. DESCRIPTION NOTES
32 Flowtronic FPL food pump model HE555TSTSRJT 7 bar on stainless mobile frame with
1000mm diameter hopper
33 Stainless steel pastry sheeter 20” roller width
34 Apple Engineering TP1250 depositor (s/n 21702) YOM 2002
35 Food Tools CS4-ACC cake portioner speed: 100-150 p/h - product size ranges: 6”-12”
diameter products, 6.5” tall portion size ranges:4-24 portions (s/n 2779) YOM 2002
36 Stainless steel 260mm diameter semi automatic pie press
36a Stainless steel 1.5” food pump
37 Turbo MND825989 stainless steel depositor
38 Stainless steel portable single shot depositor
39 Fred Johnson four head piston depositor
39a Fred Johnson four head piston depositor
40 Stainless steel rise and fall depositor twin shot
41 Loma Superscan Micro ISC metal detector aperture 450mm x 200mm
42 Hobart H400 3-phase mixer, ML-No. SEF.1.87, Volts 415, 50Hz, 1.1kW, CJ 3.N Ph, 2.6A – it
comes with two sizes of mixing bowl, namely a 40 quart capacity and 30 quart. Each size of
bowl comes complete with a K-blade, balloon whisk and dough-hook. (s/n 97.082.592)
43 Gorring Kerr Graesby metal detector 400mm x 100mm with air reject
44 Loma Superscan Micro ISC metal detector aperture 1050mm x 60mm on plastic slatted belt
conveyor (s/n MD33312A)
45 Loma Superscan Micro ISC metal detector aperture 450mm x 250mm (s/n 3755485)
46 Graesby Best D30 check weigher, with air reject and drop down conveyor reject (s/n B2467)
47 Intelligent Systems Control ST1450 friction stream feeder maximum product size: 11 3/4 in.
w x 14 in. l (29.85 cm x 35.56 cm) thickness range: .002 in. to 1 in. (.05 mm to 25.4 mm) belt
speed: 9,000 in./min. (228.59 m/min.) with IQuipped™ intelligent system controller
48 Intelligent Systems Control ST1450 friction stream feeder maximum product size: 11 3/4 in.
w x 14 in. l (29.85 cm x 35.56 cm) thickness range: .002 in. to 1 in. (.05 mm to 25.4 mm) belt
speed: 9,000 in./min. (228.59 m/min.) with IQuipped™ intelligent system controller
49 Loma check weigher (s/n 353122-200076)
50 Loma 7000 series combination check weigher metal detector aperture 250mm x 130mm
(s/n CR23449)
51 Walsall Labelling Systems conveyor and applicator series 125
52 Loma check weigher (s/n 8353122-200077)
53 Loma 7000 series combination check weigher metal detector aperture 300mm x 130mm
(s/n CB31353)
54 Graesby Best D30 check weigher, with air reject and drop down conveyor reject (s/n B3337)
55 Graesby Best D30 check weigher, with air reject and drop down conveyor reject (s/n B3556)
56 Lock Weigh Check CK1500 check weigher (s/n155061)
57 Lock Weigh Check CK1500 check weigher (s/n154991)
58 Syspal stainless steel 200ltr total bin hoist fully guarded
59 Loma IQ2 metal detector aperture number 250mm x 90mm
60 D C Norris portable stainless steel pressure vessel 23Psi 600ltr capacity (s/n 002) YOM 2001
61 Syspal Ezylift tote bin hoist 125kg SWL model E130
62 Raque model 1272-29-1 10 head piston depositor YOM 2005 (s/n 1050281)
63 Twin lane stainless steel linked indexing conveyor 4000mm x 110mm
64 Turbo Tools SDT521382 low level depositor and pump
65 PALS MAC label applicator conveyor
66 BCH stainless steel jacketed vessels appx 1000ltr capacity 3.33bar 146ºC fully vacuumed
(s/n 20900-1)
67 BCH stainless steel jacketed vessels appx 1000ltr capacity 3.33bar 146ºC fully vacuumed
(s/n 20900-2)
68 Alfa Laval stainless steel 1000ltr appx jacketed vessel (s/n K91124A)
69 Stainless steel steaming cabinet internal dimensions 1700mm x 1150mm x 1400mm
70 Stainless steel steaming cabinet internal dimensions 1700mm x 1150mm x 1400mm
71 Baynflex 6000 inclined neoprene belt adjustable and portable conveyor 3500mm x 340mm
72 Komen Gernal B 300ltr tilting cooking kettle oil jacketed with twin paddle agitator 3ph power
73 Introlox swan neck conveyor 2800mm x 460mm
5
6. LOT No. DESCRIPTION NOTES
74 WMH Western Mechanical Handling twin lane indexing conveyor stainless steel belt
75 Syspal SG100 M1015 250kg tote hoist fully guarded YOM 2004
76 ABR blender all stainless steel forward and reverse action with tipping 10 arm paddle with
scrape surface 600ltr appx
77 Tecnopast B550 spiral 50 quart mixer (s/n 8002085)
78 Fred Johnson savoury pie line two across 8” tooling comprising of blocker, sheeter and crimper
79 Lock Met30+ metal detector aperture 1150mm x 100mm
80 Packaging Automation PA 240 automatic, integral conveyor fed machine for heat sealing reel
fed film lids to preformed trays and containers 17 cycles/minute, dimensions 3500-12000 x
1406 x 1771mm (s/n 1674240F14366)
81 Hollymatic stainless steel meat mixer former (Type 710/45?)
82 Baynflax pie machine 4 across complete with blocker and billeter - set for 6” quiche bases
crimped and plain
82a Flighted inclined neoprene bucket conveyor 3500mm x 650mm discharge 2300mm
82b Stainless steel tote bin hoist
82c Stainless steel drying conveyor wire mesh belt twin heaters 3500mm x 240mm
83 Endoline carton taper
84 Tom Chandley two deck electric high crown oven (s/n 4555)
85 Nuttall Turboserve display case open fronted, base + 3 shelf layout, product temperature 75°C
to 80°C
86 Sewer Rondo ZM5800M pastry brake sheeter 650mm x 2720mm table (s/n A5233025)
87 Bell Perkins pastry brake on stainless frame 750mm x 500mm table
88 Harvester HL5200 bread slicer 50 cycles 20mm cut
89 WMH Western Mechanical Handling 3200mm wide oven loader (s/n 6328807) YOM 2005
90 Arcall stainless steel spray glazer
91 Johnson 20” sheeter (s/n B73790)
92 Johnson 14” sheeter (s/n HPASH06)
93 Tom Chandley Compacta four deck 24 tray high crown electric deck oven
94 Baynflex five head piston depositor (s/n 42708)
95 Loma Micro II metal detector aperture 1090mm x 70mm (s/n 896188)
96 Rational Climaplus Combi CPCG oven gas fired 20 x 2/1 GN or 40 x 1/1 GN YOM 2001
97 Steinhart model EN10 MX electric steam combi oven (s/n 06900897)
98 Tom Chandley Compacta five deck 15 tray 2 x low crown 2x high crown electric deck oven
with steam
99 Syspal stainless steel 200ltr fully guarded tote bin hoist
100 Icon carton baler
101 Foster stainless steel single door refrigerator
102 Adco 15D105-stainless steel semi automatic hand load cartoner - automatically erects
horizontal end load cartons that are filled by hand and then automatically closed speed
variable to 125cpm (s/n 7174HG)
103 Rexroth hydraulic power pack (27210)
104 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
105 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
106 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
107 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
108 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
109 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
110 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
111 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
112 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
113 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
114 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
115 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
116 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
117 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
6
7. LOT No. DESCRIPTION NOTES
118 Mono BX FG156 two tray convection oven suitable for 60cm x 40cm trays
119 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
120 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
121 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
122 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
123 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
124 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
125 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
126 Mono BX FG158 four tray convection oven suitable for 60cm x 40cm trays
127 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
128 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
129 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
130 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
131 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
132 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
133 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
134 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
135 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
136 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
137 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
138 Eurofours electric two tray convection oven suitable for 60cm x 40cm trays
139 Eurofours electric four tray convection oven suitable for 60cm x 40cm trays
140 Eurofours electric four tray convection oven suitable for 60cm x 40cm trays
141 Eurofours electric four tray convection oven suitable for 60cm x 40cm trays
142 Eurofours electric four tray convection oven suitable for 60cm x 40cm trays
143 Meinke oven heat exchanger
144 Bonar Automation Ltd S Automatic sleeving machine PJ6789
145 Bonar Automation Ltd S Automatic sleeving machine PJ6789
146 WMH Western Mechanical Handling twin lane indexing conveyor 90 degree stainless steel belt
model UM
147 WMH Western Mechanical Handling twin lane indexing conveyor 90 degree stainless steel belt
model UM
148 AND bench scale FS 6kg capacity
149 Silverline model 3250 5kg platform scale
150 Avery 15kg platform scale
151 Avery PR 4lb balance scale
152 Salter C3265 3kg platform scale
153 AND bench scale FS 6kg capacity
154 Weightron 3kg platform scale
155 Avery HL275 3kg scale
156 Avery HL275 3kg scale
157 Herbert SSP500 checkweight 6kg scale
158 Oddy 2 pocket roll plant
159 Oddy 2 pocket roll plant (suitable for repairs/spare)
160 Oddy 2 pocket roll plant (suitable for repairs/spare)
161 Wolfking Belam DK20-13 stainless steel meat mixer
162 Hobart stainless steel utensil washer
163 Tri Tech Systems stainless steel transfer pump
164 Mono Optima 36 piece BDM moulder
165 Industrial Washing Machines Ltd stainless steel rack washer
166 Williams two door stainless steel chiller
167 Rollermatic SF600 floor standing pastry brake sheeter 600mm wide x 1400mm long YOM 1999
168 Hi-Tech digital metal detector non ferrous aperture 270mm x 110mm
169 Tom Chandley four deck electric low crown oven chamber size 1500mm x 120mm x 160mm
high
7
8. LOT No. DESCRIPTION NOTES
170 Rutland Mark II spread master buttering machine YOM 1998
171 Anchor Minimatic III sandwich lidder
172 Levent model LKS combination oven
173 Hobart CS10-11E 10 grid combination oven electric
174 Spare
175 Eastwood stainless steel L sealer
176 Neoprene belt conveyor 4000mm long x 400mm wide
177 Forni Fiorini Maxi Rotor two rack gas rotary oven with four racks
178 Falcon Covectasteam 6 convection oven
179 Rondo Rondo-lino make up pastry line with various cutters for Danish pastry cutting table
model SPF 610.B s/n C4053301, guillotine model ZGM 635 s/n C4044209 filling depositor
model ZFGRA s.n C4044208 YOM 2004
180 Stainless steel table with shelf under, up stand and adjustable height 1500mm x 600mm
181 Hobart NCM 10 quart planetary mixer
182 Steno 20 quart planetary mixer
183 Rational SCC 61G convection oven gas
184 Upright 32 tray prover cabinet (as new)
185 Upright 32 tray prover cabinet (as new)
186 Upright 16 tray prover cabinet (as new)
187 Upright 16 tray prover cabinet (as new)
188 Upright 16 tray prover cabinet
189 Spiral mixer 75kg flour capacity, fully automatic, double motion and double speed.
microcomputer digital display control panel, designed especially for heavy dough & bagel.
190 Spiral mixer 200kg flour capacity, fully automatic, removeable bowl, double motion and double
speed. microcomputer digital display control panel, designed especially for heavy dough &
bagel.
191 Convection electric oven mechanical controls .two time setting with steam facility all stainless
steel construction 60cm x 40cm trays (as new)
192 Convection electric oven mechanical controls .two time setting with steam facility all stainless
steel construction 60cm x 40cm trays (as new)
193 Convection electric oven mechanical controls .two time setting with steam facility all stainless
steel construction 60cm x 40cm trays (as new)
194 Convection electric oven mechanical controls .two time setting with steam facility all stainless
steel construction 60cm x 40cm trays
195 Pizza oven lava stone base temperature to 400 degree
196 Semi automatic bread slicer 13mm cut all stainless steel contact parts (as new)
197 Semi automatic bread slicer 13mm cut all stainless steel contact parts (as new)
198 Semi automatic bread slicer 13mm cut all stainless steel contact parts (as new)
199 Gilbert fixed bowl spiral mixer
200 John Hunt pastry brake 18” roller
201 Tom Chandley four deck electric low crown oven chamber size 1500mm x 120mm x 160mm
high
202 High speed dough mixer 16kg capacity
203 Mendoza PM3 two piston volumetric divider rounder
204 Mendoza PROV-308 / imperial intermediate prover 224 pockets of 800gm pieces
204a Mendoza Henidora conical rounder, 1500 pcs/h, range 150 - 1200 g. 1,1 kW.
205 20 x cooling wire racks 760mm x 450mm
206 20 x oven trays 760mm x 450mm.
207 Stainless steel preparation table 660mm x 650mm
208 Stainless steel preparation table 750mm x 750mm
209 Stainless steel preparation table 1150mm x 750mm
210 Stainless steel preparation table 1100mm x 700mm
211 Stainless steel preparation table 1100mm x 700mm
212 Stainless steel preparation table 1500mm x 600mm
213 Stainless steel preparation table 1150mm x 730mm
214 Stainless steel preparation table 1100mm x 600mm
8
9. LOT No. DESCRIPTION NOTES
215 Stainless steel preparation table 1100mm x 600mm
216 Stainless steel preparation table 800mm x 500mm
217 Stainless steel preparation table 1550mm x 750mm
218 Stainless steel preparation table 700mm x 400mm
219 Stainless steel preparation table 1100mm x 900mm
220 Stainless steel preparation table 1100mm x 900mm
221 Stainless steel preparation table 1100mm x 750mm
222 Stainless steel preparation table 1850mm x 750mm
223 Stainless steel preparation table 1850mm x 750mm
224 Stainless steel preparation table 1100mm x 600mm
225 Stainless steel preparation table 1100mm x 600mm
226 Stainless steel preparation table 1200mm x 850mm
227 Stainless steel preparation table 540mm x 450mm
228 Stainless steel preparation table 1100mmx 700mm
229 Stainless steel preparation table 1150mm x 750mm
230 Stainless steel preparation table 1150mm x 770mm
231 Stainless steel preparation table 1250mm x 800mm
232 Stainless steel preparation table 1150mm x 750mm
233 Lincat A001 chilled display case (s/n 27010879)
234 Extendable roller conveyor 300mm wide
235 Turbovac SB500K vacuum packer 500mm x 800mm chamber
236 Bizerba single chamber vacuum packer
237 Pani Record French stick moulder
238 Sottoriva pastry sheeter roller
239 Norbake pastry press
240 Bun divider moulder 30 piece
241 Flap jack slicer
242 Kemper SPL 125 fixed bowl spiral mixer
243 PMR New Print labeler
244 Benier Model Small R dough moulder
245 Rose Foregrove Merlin flow wrapper MWS-100 180 wraps per min. maximum height 170mm,
maximum width 300mm. (s.n 50565)
246 Semi automatic bread slicer 13mm cut all stainless steel contact parts
247 Stainless steel preparation table 800mm x 500mm
248 Stainless steel preparation table 1150mm x 740mm
249 Stainless steel preparation table 1900mm x 780 with rack tray storage
250 Stainless steel preparation table 2100mm x 600mm
251 Stainless steel preparation table 1250mm x 1180mm
252 Stainless steel rotary table 900mm diameter
253 Audionvac single chamber vacuum packer
254 Hobart A120 20 quart mixer with stand bowl and tools
255 Hobart A120 20 quart mixer with tools
256 Herbert VA4000 gravity fed slicer with stack and shingle (s/n2016227)
257 Falcon 900SX gas salamander
258 Merry Chef Mealstream CTM3-5 oven (s/n 80030300)
259 Stainless steel rotary table 900mm diameter
260 Merry Chef Mealstream CTM3-5 oven (s/n 80030300)
261 Cygnet 10ltr water stihl (U36A10)
261a Dualit 10ltr soup kettle
262 Lincat B53 hot plate and Baine Marie
263 Caprigiani ice cream machine on stand
264 Bartlett Sabre steam convection oven electric six rack
265 Matfer single top Baine Marie
266 Choko Therma electric hot plate
9
10. LOT No. DESCRIPTION NOTES
267 Sottoriva FC4 mini moulder (s/n 10185)
268 Mono FG0191 bake off oven (s/n 43439)
269 Cougar twin hob electric hot plate
270 Hobart A120 20 quart mixer with bowl and tools
271 John Hunt manual pie press
272 John Hunt manual pie press
273 Morton mini mixer M00EUP
274 Berief 225ltr tilting tipping brat frying pan oil jacketed all stainless steel
274a Berief 225ltr tilting tipping brat frying pan oil jacketed all stainless steel
275 Stainless steel preparation table 2040mm x 620mm
276 Stainless steel preparation table 1300mm x 550mm
277 Stainless steel preparation table 1500mm x 600mm
278 Stainless steel preparation table 1550mm x 620mm
279 Stainless steel preparation table 1550mm x 600mm
280 Stainless steel preparation table 1900mm x 780mm
281 Stainless steel preparation table 2500mm x 750mm
282 Stainless steel table with under racking 12 tiers
283 Stainless steel preparation table 760mm x 450mm
284 Stainless steel counter with rack storage 15 tray capacity and built in stihl 3000mm x 740mm
285 Stainless steel sink and drainer
286 Sission twin sink and drainer
287 Stainless steel deep utensil sink and drainer
288 Stainless utensil sink with twin drainer
289 Stott & Benham electric bulls eye hob
290 Stainless steel hand wash sink with sensor
291 Stainless steel hand wash sink with sensor
292 Stainless steel hand wash sink with sensor
293 Stainless steel hand wash sink with sensor
294 Stainless steel hand wash sink with sensor
295 Stainless steel hand wash sink with sensor
296 Stainless steel sink with under counter
297 Stainless steel utensil sink
298 Stainless steel hand wash basin
299 Stainless steel hand wash basin
300 Stainless steel preparation table 1100mm x 900mm
301 Stainless steel preparation table 1200mm x 600mm
302 Stainless steel lectern
303 Stainless steel table with four rack storage 1100mm x 580mm
304 Stainless hand wash basin
305 Stainless hand wash basin
306 Utensil sink and drainer
307 Unitech hand basin sink
308 Unitech hand basin sink
309 Stainless hand wash basin
310 Stainless steel lectern
311 Stainless steel lectern
312 Stainless steel table with ten rack storage 170mm x 450mm
313 Protech stainless four station knee operated sink
314 Protech stainless four station knee operated sink
315 Protech stainless four station knee operated sink
316 Stainless steel table with can opener and rack storage 1200mm x 800m
317 Stainless steel preparation table 750mm x 600mm
318 Stainless steel preparation table 1200mm x 1000mm
319 Stainless steel preparation table 1200mm x 1000mm
10
11. LOT No. DESCRIPTION NOTES
320 Stainless steel preparation table 1100mm x 950mm
321 Stainless steel preparation table 1200mm x 600mm
322 Stainless steel gantry step platform
323 Stainless steel gantry step platform
324 Stainless steel gantry step platform
325 Walk through stainless steel boot trough
326 3 x Apple MR150 depositors (suitable for spare/repair)
327 Nilfisk CFM Aspirator model 3507-WXX regenerative blower with three-phase TEFC induction
motor
328 Nilfisk TT3455 walk behind floor scrubber dryer
329 NSS Industrial BP27 ULTRA MAXX 27” powered 1500rpm floor scrubber
330 NSS Industrial BP27 ULTRA MAXX 27” powered 1500rpm floor scrubber
331 NSS BP-RANGER 1250 S - 2 HP tip dispose base industrial wet/dry vacuum
332 Nilfisk HD series industrial vacuum
333 Numatic industrial vacuum cleaner
334 NSS BP-RANGER 1250 S - 2 HP tip dispose base industrial wet/dry vacuum
335 Supervac Evolution 5101 steam cleaner
336 Eahrle power washer
337 Karcher HD855 S power washer
338 Stainless steel 400ltr portable tank
339 Fabricare commercial dryer
340 Twin personnel lockers x 4
340a Twin personnel lockers x 4
341 Ecoair air filtration system
342 Linde E15 electric three wheel forklift 1.5 maximum lift 2.5mtr tall mast YOM 1998 (s/n
324802017415)
343 Eight tier portable rack 660mm x 430mm x 5
344 Eight tier portable rack 660mm x 430mm x 5
345 3 x stainless steel bakers racks
346 5 x Aluminium stacking pallets
347 5 x Aluminium stacking pallets
348 5 x Aluminium stacking pallets
349 5 x Aluminium stacking pallets
350 5 x Aluminium stacking pallets
351 5 x Aluminium stacking pallets
352 5 x Aluminium stacking pallets
353 Stainless steel freezer rack 1250x 650 x 1600mm
354 Twelve tier aluminium rack
355 Stainless steel 16 tray racking trolley
356 Stainless steel 14 tray racking trolley
357 Stainless steel table with shelf under, up-stand and adjustable height 1500mm x 600mm
358 Stainless steel table with shelf under and adjustable height 900mm x 600mm.
359 Stainless steel table with shelf under and adjustable height 900mm x 600mm.
360 Stainless steel table with shelf under and adjustable height 900mm x 600mm.
361 3-tier stainless steel clearing trolley 830mm x 510mm.
362 Bettcher Whizard Series II trimmer
END OF SALE
11
12. Viewing at: Unit 2, Meadow Lane,
Nottingham,
Contact the auctioneers
Nottinghamshire, for further information
East Midlands and to request a
NG2 3HD catalogue:
Nearest
Railway Station:
Pro Auction
Nottingham 0.6 miles
Limited
Nearest Airport:
Unit 5,
East Midlands Airport
Castle Donington Midsomer Enterprise Park,
Derby
Radstock Road,
DE74 2SA
Bath BA1 6LD
Tel: 0871 919 9000
United Kingdom
Local Hotels:
Tel: +44(0)1761 414000
Jurys Hotel
Fax: +44(0)845 280 2492
Waterfront Plaza,
Station Street,
Nottingham,
Email:
NG2 3BJ
info@proauction.ltd.uk
0115 901 6700
Website:
Hilton Nottingham
www.proauction.ltd.uk
Nottingham,
Nottinghamshire
Company Registration no: 5059610
NG1 3PZ
Booking Line: 0870 850 4184
Comfort Hotel Nottingham
Surplus asset?
George St,
Call us for a free
Nottingham,
Nottinghamshire
valuation and to
NG1 3BP
organise your next sale
Booking Line: 0845 45 66 399
SALIENT INFORMATION:
• Identification is required
to enable allocation of a
bidding card.
• All capacities, dimensions
and dates of manufacture
are approximate and
potential purchasers should
An effective way make their own inspection
& enquiries for verification.
to maximise
• All bids are subject to
realisation on applicable VAT 15% and a
buyers premium of 15% +
redundant assets,
VAT.
call the experts • Payment is required on day
PLEASE NOTE:
of the sale unless prior
today
Commission and telephone bids arrangements have been
Guaranteed
by arrangement only. agreed. Funds must be
cleared before collection
Results!! of goods.