This document is a service manual for TC5060, TC5070, and TC5080 combine models. It contains sections covering the engine, transmission, front axle system, hydrostatic drive, brakes and controls, hydraulic systems, steering, cab climate control, electrical systems, attachments/headers, product feeding, threshing, separation, residue handling, cleaning, and crop storage/unloading. The manual provides technical specifications and instructions for servicing and repairing components in these various systems.
Massey ferguson mf 210 compact tractor parts catalogue manualfjskkesmdmm
This document provides exploded diagrams and part lists for a Massey Ferguson MF 210/210-4 compact tractor. It includes detailed parts listings for the cylinder block, camshaft, pistons, cylinder head, lubricating system and gasket sets. Each component drawing shows the part numbers, quantities and descriptions for the individual parts.
The document discusses aircraft dimensions and measurements for the Embraer 170 and 175 aircraft. It provides details on total length, height, wing span, wing and tail areas, fuselage diameter, and distances between components. Diagrams illustrate the measurements. The aircraft use a coordinate system to define stations along the longitudinal, lateral, and vertical axes from a point of origin at the front of the aircraft.
This document provides instructions for using the parts catalogue for a Hero MotoCorp motorcycle. It explains how to identify parts, read part numbers, order replacement parts, and understand the flat rate times for repairs. The catalogue includes an index listing the engine and frame groups with their respective system components to help technicians find the correct parts.
Hyundai r130 lc 3 crawler excavator service repair manualfksjksmmde
The document provides instructions for removing and installing a hydraulic pump. It describes disconnecting pilot line hoses, draining the oil, removing mounting bolts, and lifting out the pump assembly. For installation, it lists cleaning components like the suction strainer and breather, adding new oil, bleeding air from the system, and checking for leaks once started. It also includes an exploded diagram of the pump components and lists tools and torque specifications needed for maintenance.
Windsor Machines is India's largest manufacturer and exporter of plastic processing machinery. It has over 1500 employees across 3 plants in India. The company has technical collaborations with foreign companies for certain machine types. It provides good welfare benefits to employees like subsidized meals, medical benefits, and sports activities. The company has many departments including purchase, sales, marketing, R&D, assembly, and quality control. The document then describes the extrusion line machine process and components used to extrude plastic pipes and profiles. This includes single and twin screw extruders, dies, cooling units, traction units, and cutting units. Technical specifications are provided for the various machines and components.
about aircraft oxygen system.
we cover all oxygen system and their equipment and component.
types of oxygen system.
and oxygen system cylinder valves and gauges.
The document provides an overview of the IAE V2500 engine, including its mechanical arrangement and key components. The V2500 is a twin-spool, high-bypass turbofan engine produced through an international partnership. It powers several Airbus and Boeing aircraft models. The engine incorporates technologies like FADEC control and features a fan, booster, high-pressure compressor, combustor, high-pressure turbine, low-pressure turbine, and other systems. It utilizes bleed air and has digital electronic controls.
Volvo EC240C LD EC240CLD Excavator Service Repair Manualfujdfjjskrtekme
This is the Highly Detailed factory service repair manual for theVOLVO EC240C LD EC240CLD EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.VOLVO EC240C LD EC240CLD EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Safety
0 General
1 Standard Parts, Service
2 Engine with Mounting and Equipment
3 Elec. System, Warning System, Information System, Instruments
4 Power Transmission
5 Frame and Crawler Unit
6 Machinery House, Cab, Exterior Trim Parts Anywhere
7 Hydraulic System, Digging, Handling, Grading Equipment, Misc Equipment
Hydraulic and Electric schematics
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveVOLVO EC240C LD EC240CLD EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Massey ferguson mf 210 compact tractor parts catalogue manualfjskkesmdmm
This document provides exploded diagrams and part lists for a Massey Ferguson MF 210/210-4 compact tractor. It includes detailed parts listings for the cylinder block, camshaft, pistons, cylinder head, lubricating system and gasket sets. Each component drawing shows the part numbers, quantities and descriptions for the individual parts.
The document discusses aircraft dimensions and measurements for the Embraer 170 and 175 aircraft. It provides details on total length, height, wing span, wing and tail areas, fuselage diameter, and distances between components. Diagrams illustrate the measurements. The aircraft use a coordinate system to define stations along the longitudinal, lateral, and vertical axes from a point of origin at the front of the aircraft.
This document provides instructions for using the parts catalogue for a Hero MotoCorp motorcycle. It explains how to identify parts, read part numbers, order replacement parts, and understand the flat rate times for repairs. The catalogue includes an index listing the engine and frame groups with their respective system components to help technicians find the correct parts.
Hyundai r130 lc 3 crawler excavator service repair manualfksjksmmde
The document provides instructions for removing and installing a hydraulic pump. It describes disconnecting pilot line hoses, draining the oil, removing mounting bolts, and lifting out the pump assembly. For installation, it lists cleaning components like the suction strainer and breather, adding new oil, bleeding air from the system, and checking for leaks once started. It also includes an exploded diagram of the pump components and lists tools and torque specifications needed for maintenance.
Windsor Machines is India's largest manufacturer and exporter of plastic processing machinery. It has over 1500 employees across 3 plants in India. The company has technical collaborations with foreign companies for certain machine types. It provides good welfare benefits to employees like subsidized meals, medical benefits, and sports activities. The company has many departments including purchase, sales, marketing, R&D, assembly, and quality control. The document then describes the extrusion line machine process and components used to extrude plastic pipes and profiles. This includes single and twin screw extruders, dies, cooling units, traction units, and cutting units. Technical specifications are provided for the various machines and components.
about aircraft oxygen system.
we cover all oxygen system and their equipment and component.
types of oxygen system.
and oxygen system cylinder valves and gauges.
The document provides an overview of the IAE V2500 engine, including its mechanical arrangement and key components. The V2500 is a twin-spool, high-bypass turbofan engine produced through an international partnership. It powers several Airbus and Boeing aircraft models. The engine incorporates technologies like FADEC control and features a fan, booster, high-pressure compressor, combustor, high-pressure turbine, low-pressure turbine, and other systems. It utilizes bleed air and has digital electronic controls.
Volvo EC240C LD EC240CLD Excavator Service Repair Manualfujdfjjskrtekme
This is the Highly Detailed factory service repair manual for theVOLVO EC240C LD EC240CLD EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.VOLVO EC240C LD EC240CLD EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Safety
0 General
1 Standard Parts, Service
2 Engine with Mounting and Equipment
3 Elec. System, Warning System, Information System, Instruments
4 Power Transmission
5 Frame and Crawler Unit
6 Machinery House, Cab, Exterior Trim Parts Anywhere
7 Hydraulic System, Digging, Handling, Grading Equipment, Misc Equipment
Hydraulic and Electric schematics
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveVOLVO EC240C LD EC240CLD EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Collecting Data: Discourse Community EthnographyHeather Wayne
The document provides guidance for conducting an ethnographic study of a discourse community. It instructs students to:
1) Observe the community in action for 30 minutes to 1 hour, taking notes on behaviors, language practices, and evidence of authority.
2) Collect texts used by the community such as emails, newsletters, and social media posts.
3) Interview community members, preparing questions about goals, expertise/participation, communication/genres used, and specialized terminology. Practice interviewing in small groups.
4) Bring all collected data to class to share results of observations, texts, and interview questions.
Injection Molding (MIT 2.008x Lecture Slides)A. John Hart
The document discusses injection molding. It begins with an overview of injection molding and the types of products made through the process. It then covers the fundamentals of polymers used in injection molding, including their properties and how they behave under heat and pressure. The document outlines the key components of injection molding machines and mold tooling, and reviews the injection molding process parameters and how they impact the filling and cooling cycles. It also discusses common defects and guidelines for part design. Advanced topics covered include side-action molding, insert molding, and overmolding.
Jcb t4 f 444 elec engine (4 cyl) service repair manualufjdjfjkskekmmd
This service manual provides instructions for servicing the engine, including the rocker assembly, on JCB T4F 444 and 448 electric engines. The document provides details on removing and installing the rocker shaft assembly, adjusting valve clearances, and servicing the rockers, push rods, tappets, and rocker cover. Safety information is provided throughout advising technicians to follow instructions, let hot engines cool, and replace manuals that become damaged.
Caterpillar cat 966 c wheel loader (prefix 18b) service repair manual (18b012...fjsjjekdkme
This document provides instructions for installing a fuel injection pump housing and governor on a Caterpillar 3306 engine. The steps include:
1. Ensuring the number 1 piston is at top center position for timing.
2. Installing alignment tools in the flywheel housing.
3. Checking valve timing and turning the flywheel until the number 1 piston is at the correct position.
4. Installing the fuel injection pump housing and governor according to the assembly procedure.
This presentation is an examination of structural repair of aircraft. It details the goals, regulations and classification of repairs for different types of aircraft damage.
The paper that this presentation is based on was presented by Dr. Kishore Brahma of the AXISCADES Engineering Core Group at the International Conference & Exhibition on Fatigue, Durability & Fracture Mechanics (FatigueDurabilityIndia2015) in Bangalore from 28-30th May 2015.
At Anjou Aeronautique you will encounter a distinctive tailor-made service for the cabin’s refurbishment and customization.
We are the only company in the world that provides a complete pack of products (textiles, composite products, seat belts, extensions and restraint systems) and services (design and engineering, certification, maintenance and repairs) for the cabin interiors.
This workshop manual provides instructions for maintenance, service, and repair of Isuzu industrial diesel engines models A-4JA1, A-4JB1, and 4JB1T. It consists of 13 sections covering general information, maintenance, disassembly, inspection, reassembly, lubrication systems, cooling systems, fuel systems, electrical systems, troubleshooting, special tools, repair standards, and conversion tables. The manual is intended to help technicians perform necessary work on these Isuzu engines.
This document contains a list of fault codes related to engine components and systems. It includes the fault code number, color, SPN, FMI, and a brief description of each fault. There are over 290 fault codes listed with issues ranging from sensor malfunctions to engine control unit errors to fuel system problems. The faults are applicable to a variety of engine models indicated by the columns with abbreviations like QSK19 and QSK60.
The document discusses the design of blow moulded parts and blow moulds. It covers blow moulding applications and considerations for part design such as volume, openings, closures, attachments. It also discusses material selection, parison programming, pinch-off design, neck finishing, venting, and provides a blow mould design checklist. The key factors in blow moulded part and mould design are the material, part size and shape, wall thickness uniformity, openings, and special structural or mechanical requirements of the part.
Sterling Tools Limited is a leading manufacturer of fasteners in India. It produces special, standard, chassis, and engine fasteners. The industrial training document describes Sterling's manufacturing process, which includes forging wire, forming heads through cutting, forming, and trimming, rolling threads, machining parts through turning and other operations, heat treating through hardening and tempering, electroplating for surface finishing, and implementing pollution controls and energy conservation efforts.
Rubber extruders have a varied field of application. So, when you come across a rubber profile, strip, hose, cable, wire, cord coating, tire tread, v-belt, tube, or blank remember that they are only a few handful of products manufactured using extrusion process. In this Knowledge On-The-Go Special Supplement, we bring to you a ‘collector’s edition’ on Extruders and Extrusion incorporating the fundamentals.
This presentation give the total overview of aircraft tyre from manufacturing to storage to basic design criteria and selection of main wheel, nose wheel. This ppt gives brief view into manufacturing process, precaution in storage and types of wear occurring in tire
Iveco f4 ge04 engine service repair manualfujsefksemm
This document provides information on NEF engines, including:
- Details on the lubricating, cooling, and air induction systems. Diagrams show layout and key components.
- Explanations of the oil vapor recirculation system and turbocharger operation.
- Sections and content overview, including general specifications, fuel type, duty applications, overhaul procedures, equipment, and safety instructions.
- Engine identification code definitions for model variations.
This parts list contains 6 items needed to assemble a drive shaft subassembly. The items include an Inconel drive shaft, sprocket, bushings, keys, tapered roller bearings, and spool. Quantities, part numbers, and other specifications like fits and dimensions are provided for each of the 6 parts.
OUTICOM - Shamal - Catalogue des compresseurs à piston - 1.5-15 KWOUTICOM
Outicom propose une large gamme d'équipements et consommables destinée aux professionnels de l'industrie et de l'automobile du Maroc.
Notre partenariat de représentation exclusive avec SHAMAL, leader incontesté du domaine, permet de vous proposer des équipements de qualité, fiables et un large éventail de solutions concrètes à la plupart de vos besoins.
Découvrez notre gamme SHAMAL de compresseurs à piston professionnel et heavy duty de 1.5 à 15KW. Disponible également en version insonorisé avec la gamme SHAMAL PROSIL et SHAMAL SILENT.
This document provides information about registering a vehicle identification number (VIN) into a replacement engine control module (ECM) for a 1NZ-FE engine. It includes instructions for using an intelligent tester to read the existing VIN from the ECM and write a new VIN into a replacement ECM after installation. The process involves using the tester's buttons and screen to input each character of the 17-digit VIN code and moving the cursor to enter or correct characters as needed.
CarDAQ Plus Manual from Clark Heintz Tools & Equipment LLCClark Heintz
This document is a user manual for the CarDAQ-Plus device. It provides an overview of the device's features, which include communicating with vehicles using several protocols and serving as an embedded computer. It describes the initial setup process for connecting the device to a computer via Ethernet in different networking configurations. It also covers installing software, exploring the device's web interface, updating firmware, and troubleshooting. The manual provides details on the device's components and specifications.
This type of moulding is helpful to make containers ,jars ,water bottles and many more so please kindly go through this process .With the help of this type of moulding we can perform our experiment of our daily used water cans e.g: 5ltrs ,10ltrs ,20ltrs ,25ltrs ect.
New holland lb115 b backhoe loader service repair manualjjdjfkkskemme
This document is a workshop manual that provides technical information for servicing and repairing LB90.B-LB115.B loader backhoes. It contains sections on safety precautions, maintenance, specifications, the transmission, torque converters, and front axles. The manual consists of two volumes, one for the loader backhoe and one for the engine. It provides the necessary information for carrying out service and repair work, including tools needed and repair procedures.
Hyster g007 (h8.00 xm) forklift parts catalogue manualfusefjsekkemm
This parts manual is divided into 14 major sections covering the various systems of the Challenger H8.00-12.00XM truck. Section 1 covers the frame and includes descriptions and illustrations of components such as the hood, cab, counterweight, floor plates, and labels. Repair procedures can be found in the service manual.
Cummins onan generator set with power command 3100 controller model (dfec ) s...fusefjsekkemm
This document is a service manual that provides information for troubleshooting and servicing generator sets equipped with PowerCommand 3100 controllers. It includes sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, day tank fuel transfer pumps, optional enclosure fuel tank systems, and wiring diagrams. The manual contains detailed technical information, safety instructions, and step-by-step procedures for maintaining and repairing generator set components.
Collecting Data: Discourse Community EthnographyHeather Wayne
The document provides guidance for conducting an ethnographic study of a discourse community. It instructs students to:
1) Observe the community in action for 30 minutes to 1 hour, taking notes on behaviors, language practices, and evidence of authority.
2) Collect texts used by the community such as emails, newsletters, and social media posts.
3) Interview community members, preparing questions about goals, expertise/participation, communication/genres used, and specialized terminology. Practice interviewing in small groups.
4) Bring all collected data to class to share results of observations, texts, and interview questions.
Injection Molding (MIT 2.008x Lecture Slides)A. John Hart
The document discusses injection molding. It begins with an overview of injection molding and the types of products made through the process. It then covers the fundamentals of polymers used in injection molding, including their properties and how they behave under heat and pressure. The document outlines the key components of injection molding machines and mold tooling, and reviews the injection molding process parameters and how they impact the filling and cooling cycles. It also discusses common defects and guidelines for part design. Advanced topics covered include side-action molding, insert molding, and overmolding.
Jcb t4 f 444 elec engine (4 cyl) service repair manualufjdjfjkskekmmd
This service manual provides instructions for servicing the engine, including the rocker assembly, on JCB T4F 444 and 448 electric engines. The document provides details on removing and installing the rocker shaft assembly, adjusting valve clearances, and servicing the rockers, push rods, tappets, and rocker cover. Safety information is provided throughout advising technicians to follow instructions, let hot engines cool, and replace manuals that become damaged.
Caterpillar cat 966 c wheel loader (prefix 18b) service repair manual (18b012...fjsjjekdkme
This document provides instructions for installing a fuel injection pump housing and governor on a Caterpillar 3306 engine. The steps include:
1. Ensuring the number 1 piston is at top center position for timing.
2. Installing alignment tools in the flywheel housing.
3. Checking valve timing and turning the flywheel until the number 1 piston is at the correct position.
4. Installing the fuel injection pump housing and governor according to the assembly procedure.
This presentation is an examination of structural repair of aircraft. It details the goals, regulations and classification of repairs for different types of aircraft damage.
The paper that this presentation is based on was presented by Dr. Kishore Brahma of the AXISCADES Engineering Core Group at the International Conference & Exhibition on Fatigue, Durability & Fracture Mechanics (FatigueDurabilityIndia2015) in Bangalore from 28-30th May 2015.
At Anjou Aeronautique you will encounter a distinctive tailor-made service for the cabin’s refurbishment and customization.
We are the only company in the world that provides a complete pack of products (textiles, composite products, seat belts, extensions and restraint systems) and services (design and engineering, certification, maintenance and repairs) for the cabin interiors.
This workshop manual provides instructions for maintenance, service, and repair of Isuzu industrial diesel engines models A-4JA1, A-4JB1, and 4JB1T. It consists of 13 sections covering general information, maintenance, disassembly, inspection, reassembly, lubrication systems, cooling systems, fuel systems, electrical systems, troubleshooting, special tools, repair standards, and conversion tables. The manual is intended to help technicians perform necessary work on these Isuzu engines.
This document contains a list of fault codes related to engine components and systems. It includes the fault code number, color, SPN, FMI, and a brief description of each fault. There are over 290 fault codes listed with issues ranging from sensor malfunctions to engine control unit errors to fuel system problems. The faults are applicable to a variety of engine models indicated by the columns with abbreviations like QSK19 and QSK60.
The document discusses the design of blow moulded parts and blow moulds. It covers blow moulding applications and considerations for part design such as volume, openings, closures, attachments. It also discusses material selection, parison programming, pinch-off design, neck finishing, venting, and provides a blow mould design checklist. The key factors in blow moulded part and mould design are the material, part size and shape, wall thickness uniformity, openings, and special structural or mechanical requirements of the part.
Sterling Tools Limited is a leading manufacturer of fasteners in India. It produces special, standard, chassis, and engine fasteners. The industrial training document describes Sterling's manufacturing process, which includes forging wire, forming heads through cutting, forming, and trimming, rolling threads, machining parts through turning and other operations, heat treating through hardening and tempering, electroplating for surface finishing, and implementing pollution controls and energy conservation efforts.
Rubber extruders have a varied field of application. So, when you come across a rubber profile, strip, hose, cable, wire, cord coating, tire tread, v-belt, tube, or blank remember that they are only a few handful of products manufactured using extrusion process. In this Knowledge On-The-Go Special Supplement, we bring to you a ‘collector’s edition’ on Extruders and Extrusion incorporating the fundamentals.
This presentation give the total overview of aircraft tyre from manufacturing to storage to basic design criteria and selection of main wheel, nose wheel. This ppt gives brief view into manufacturing process, precaution in storage and types of wear occurring in tire
Iveco f4 ge04 engine service repair manualfujsefksemm
This document provides information on NEF engines, including:
- Details on the lubricating, cooling, and air induction systems. Diagrams show layout and key components.
- Explanations of the oil vapor recirculation system and turbocharger operation.
- Sections and content overview, including general specifications, fuel type, duty applications, overhaul procedures, equipment, and safety instructions.
- Engine identification code definitions for model variations.
This parts list contains 6 items needed to assemble a drive shaft subassembly. The items include an Inconel drive shaft, sprocket, bushings, keys, tapered roller bearings, and spool. Quantities, part numbers, and other specifications like fits and dimensions are provided for each of the 6 parts.
OUTICOM - Shamal - Catalogue des compresseurs à piston - 1.5-15 KWOUTICOM
Outicom propose une large gamme d'équipements et consommables destinée aux professionnels de l'industrie et de l'automobile du Maroc.
Notre partenariat de représentation exclusive avec SHAMAL, leader incontesté du domaine, permet de vous proposer des équipements de qualité, fiables et un large éventail de solutions concrètes à la plupart de vos besoins.
Découvrez notre gamme SHAMAL de compresseurs à piston professionnel et heavy duty de 1.5 à 15KW. Disponible également en version insonorisé avec la gamme SHAMAL PROSIL et SHAMAL SILENT.
This document provides information about registering a vehicle identification number (VIN) into a replacement engine control module (ECM) for a 1NZ-FE engine. It includes instructions for using an intelligent tester to read the existing VIN from the ECM and write a new VIN into a replacement ECM after installation. The process involves using the tester's buttons and screen to input each character of the 17-digit VIN code and moving the cursor to enter or correct characters as needed.
CarDAQ Plus Manual from Clark Heintz Tools & Equipment LLCClark Heintz
This document is a user manual for the CarDAQ-Plus device. It provides an overview of the device's features, which include communicating with vehicles using several protocols and serving as an embedded computer. It describes the initial setup process for connecting the device to a computer via Ethernet in different networking configurations. It also covers installing software, exploring the device's web interface, updating firmware, and troubleshooting. The manual provides details on the device's components and specifications.
This type of moulding is helpful to make containers ,jars ,water bottles and many more so please kindly go through this process .With the help of this type of moulding we can perform our experiment of our daily used water cans e.g: 5ltrs ,10ltrs ,20ltrs ,25ltrs ect.
New holland lb115 b backhoe loader service repair manualjjdjfkkskemme
This document is a workshop manual that provides technical information for servicing and repairing LB90.B-LB115.B loader backhoes. It contains sections on safety precautions, maintenance, specifications, the transmission, torque converters, and front axles. The manual consists of two volumes, one for the loader backhoe and one for the engine. It provides the necessary information for carrying out service and repair work, including tools needed and repair procedures.
Hyster g007 (h8.00 xm) forklift parts catalogue manualfusefjsekkemm
This parts manual is divided into 14 major sections covering the various systems of the Challenger H8.00-12.00XM truck. Section 1 covers the frame and includes descriptions and illustrations of components such as the hood, cab, counterweight, floor plates, and labels. Repair procedures can be found in the service manual.
Cummins onan generator set with power command 3100 controller model (dfec ) s...fusefjsekkemm
This document is a service manual that provides information for troubleshooting and servicing generator sets equipped with PowerCommand 3100 controllers. It includes sections on control operation, circuit boards and modules, troubleshooting, control service and calibration, servicing the generator, day tank fuel transfer pumps, optional enclosure fuel tank systems, and wiring diagrams. The manual contains detailed technical information, safety instructions, and step-by-step procedures for maintaining and repairing generator set components.
Caterpillar cat 320 e l 320el excavator (prefix klt) service repair manual (k...fusefjsekkemm
This service repair manual provides instructions for removing and installing various components of the heating and air conditioning system on a 320E and 320E L excavator. The components include the actuator motor, control module, refrigerant receiver-dryer, and various ducts, hoses, and panels. Detailed illustrations accompany the step-by-step removal and installation procedures, which note safety precautions like using protective equipment when working with refrigerant and not smoking in refrigerant areas.
Caterpillar cat 320 c ln 320cln excavator (prefix gla) service repair manual ...fusefjsekkemm
The document provides instructions for disassembling and assembling components of a 320C excavator swing drive. The disassembly procedure involves 29 steps, beginning with removing the swing motor and cleaning the swing drive area. It describes disconnecting hydraulic lines and electrical harnesses, and using lifting devices and tools to separate the swing drive from the excavator frame. Detailed illustrations are provided to identify components and guide each step.
New holland w110 c tier 2 wheel loader service repair manualfusefjsekkemm
This document provides instructions for removing the engine from a Wheel Loader. Key steps include draining fluids, disconnecting batteries, removing the radiator, hood, air intake components, and wiring harnesses. Safety precautions are outlined such as releasing hydraulic pressure before removal. Proper lifting and support equipment is required when removing heavy engine components.
Caterpillar cat 320 c l excavator (prefix bea) service repair manual (bea0000...fusefjsekkemm
The document provides instructions for removing and disassembling the stick drift reduction valve on a 320C excavator. It lists the required tools and outlines 7 steps to disassemble the valve, including removing bolts, fittings, seals, springs, and spools. Safety warnings are provided regarding relieving hydraulic pressure before disassembly and preventing contamination of hydraulic components.
This document provides installation instructions for a piston pump in a 226B3 skid steer loader. It outlines 78 steps to assemble various internal components of the pump like bearings, seals, springs, and fittings. Tools required are also listed. The pump is then installed on the vehicle and bolted down using adapter brackets. Proper torque specifications are provided for all fasteners. Safety notes warn of potential injury when handling spring loaded parts.
This document provides step-by-step instructions for disassembling the piston pump of a Caterpillar 226B3 skid steer loader. It lists 71 steps and accompanying illustrations to remove components like fittings, springs, seals, bearings, and shafts. Required tools are also specified. The goal is to disassemble the pump for cleaning purposes only.
This document provides assembly instructions for a piston pump in a Caterpillar 226B3 skid steer loader. It lists 78 steps to assemble components like bearings, seals, pins, springs and plates. Tools required include rulers, pliers, drivers and pullers. Pictures illustrate each step and call out safety when working with spring-loaded parts. The instructions specify tightening torques and note that some parts are marked for correct orientation.
This document provides step-by-step instructions for disassembling the piston pump of a Caterpillar 226B3 skid steer loader. It lists 69 required steps and accompanying illustrations. The pump is first removed from the vehicle. Then various components like fittings, springs, seals, and plates are dismantled. Measurement and markings are made to aid reassembly. Bearings, shafts, and other internal parts are then extracted using specialized tools. The process is repeated for the opposite side.
This document provides instructions for removing and installing a turbocharger and exhaust manifold on a 226B2 Skid Steer Loader with a 3024C engine. The turbocharger removal procedure involves loosening hoses, removing bolts and nuts, and removing the turbocharger from the exhaust manifold. The installation procedure specifies cleaning parts and installing in the reverse order while tightening to the specified torques. Similarly, the exhaust manifold removal involves loosening bolts and nuts and removing the manifold and gasket, while installation specifies cleaning, installing a new gasket, and tightening bolts to the specified torques. Safety notices are provided to keep parts clean and contain fluids.
Caterpillar cat 226 b skid steer loader (prefix mjh) service repair manual (m...fusefjsekkemm
- The document provides instructions to remove and install a fuel injection pump on a Caterpillar 226B skid steer loader.
- To remove the pump, disconnect fuel lines, gradually loosen fasteners, lift the pump off the engine block and remove shims. Record shim details.
- To install the pump, clean surfaces, install correct shims, position the pump, tighten fasteners, and reconnect fuel lines.
This document provides instructions for removing the tilt cylinder from a 226 Skid Steer Loader. The key steps are:
1. Release hydraulic pressure and remove quick coupler.
2. Support the rear of the machine with jack stands.
3. Remove snap rings and pins from the front of each lift cylinder.
4. Disconnect lines from each tilt cylinder and remove bolts and pins to separate the cylinder.
New holland w70 c hs tier 4b (final) compact wheel loader service repair manualfusefjsekkemm
1. Disconnect wiring harnesses, condenser hoses (if equipped), and rear lights. Remove engine hood and radiator grids.
2. Drain air conditioning system (if equipped) and disconnect fan connector. Remove condenser bracket bolts and condenser.
3. Put battery main switch in OFF position to remove engine.
New holland w70 c hs tier 4 compact wheel loader service repair manualfusefjsekkemm
This document provides instructions for removing an engine from a compact wheel loader. It describes disconnecting wiring harnesses and hoses, draining fluids, securing the engine hood with a lifting strap, removing mounting bolts, and carefully raising and removing the engine hood to access the engine. Proper safety procedures and steps to isolate energy sources are outlined.
New holland w60 c tc stage iiib compact wheel loader service repair manualfusefjsekkemm
This document is a service manual for CNH Industrial Italia S.p.A. compact wheel loaders models W50C, W60C, W70C, and W80C. It contains sections on the engine, four-wheel drive system, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, front loader and bucket, platform/cab/bodywork, and introduces basic instructions for servicing the equipment.
New holland w50 tc wheel loader service repair manualfusefjsekkemm
This document is a repair manual that provides instructions and specifications for servicing various components of W50TC, W60TC, W70TC, and W80TC wheel loaders. It includes sections on the engine, front and rear axles, brakes system, and hydraulic system. The manual contains diagrams, part dimensions, technical specifications, disassembly/assembly instructions, and troubleshooting guides for components like the diesel engine, fuel system, brake discs, calipers, gearboxes, differentials, hydraulic pumps and motors.
New holland td5.115 tractor service repair manualfusefjsekkemm
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
New holland td5.105 tractor service repair manualfusefjsekkemm
This service manual provides information on servicing engines for TD5.65, TD5.75, TD5.85, TD5.95, TD5.105 and TD5.115 tractors. It covers the engine and crankcase, valve drive and gears, crankshaft and flywheel, fuel injection system, engine cooling system, and fan and drive. Technical data, torque specifications, and required special tools are included for each engine model.
Case ih puma 220 cvt tier 4 b (final) tractor service repair manualfusefjsekkemm
This service manual provides information for servicing the Case IH PUMA® 185 CVT, PUMA® 185, PUMA® 200 CVT, PUMA® 200, PUMA® 220 CVT, PUMA® 220, and PUMA® 240 CVT tractors. The manual covers systems of the tractor such as the engine, transmission, axles, hydraulics, pneumatics, electrical systems, and more. Each system section provides detailed information on components, operation, and servicing procedures. The manual is intended to be used as a technical reference for maintenance and repair of these tractor models.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Real-time driver monitoring is one of the easiest ways to make fleet management efficient as well as seamless. Connected vehicle solutions such as fleet GPS trackers and associated software help businesses in several ways. Refer to the post below for more details.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
7. INTRODUCTION
Foreword
IMPORTANT INFORMATION
All repair and maintenance works listed in this manual must be carried out only by staff belonging to the NEW HOL-
LAND Service network, strictly complying with the instructions given and using, whenever required, the special tools.
Anyone who carries out the above operations without complying with the prescriptions shall be responsible for the
subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional or
local dealers, reject any responsibility for damages due to the anomalous behavior of parts and/or components not
approved by the manufacturer himself, including those used for the servicing or repair of the product manufactured
or marketed by the Manufacturer. In any case, no warranty is given or attributed on the product manufactured or
marketed by the Manufacturer in case of damages due to an anomalous behavior of parts and/or components not
approved by the Manufacturer.
No reproduction, though partial of text and illustrations allowed
47663637 18/02/2014
3
8. INTRODUCTION
Basic instructions - How to use and navigate through this manual
Technical Information
This manual has been produced by a new technical information system. This new system is designed to deliver
technical information electronically through Web delivery (eTim), DVD and in paper manuals. A coding system called
SAP has been developed to link the technical information to other Product Support functions, e.g., Warranty.
Technical information is written to support the maintenance and service of the functions or systems on a customer's
machine. When a customer has a concern on his machine it is usually because a function or system on his machine
is not working at all, is not working efficiently, or is not responding correctly to his commands. When you refer to
the technical information in this manual to resolve that customer's concern, you will find all the information classified
using the SAP coding, according to the functions or systems on that machine. Once you have located the technical
information for that function or system then you will find all the mechanical, electrical or hydraulic devices, compo-
nents, assemblies and sub assemblies for that function or system. You will also find all the types of information that
have been written for that function or system, the technical data (specifications), the functional data (how it works),
the diagnostic data (fault codes and troubleshooting) and the service data (remove, install adjust, etc.).
By integrating SAP coding into technical information, you will be able to search and retrieve just the right piece of
technical information you need to resolve that customer's concern on his machine. This is made possible by attaching
3 categories to each piece of technical information during the authoring process.
The first category is the Location, the second category is the Information Type and the third category is the Product:
• LOCATION - is the component or function on the machine, that the piece of technical information is going to describe
e.g. Fuel tank.
• INFORMATION TYPE - is the piece of technical information that has been written for a particular component or
function on the machine e.g. Capacity would be a type of Technical Data that would describe the amount of fuel
held by the Fuel tank.
• PRODUCT - is the model for which the piece of technical information is written.
Every piece of technical information will have those 3 categories attached to it. You will be able to use any combination
of those categories to find the right piece of technical information you need to resolve that customer's concern on his
machine.
That information could be:
• the description of how to remove the cylinder head
• a table of specifications for a hydraulic pump
• a fault code
• a troubleshooting table
• a special tool
47663637 18/02/2014
4
9. INTRODUCTION
How to use this manual
This manual is divided into Sections. Each Section is then divided into Chapters. Contents pages are included at the
beginning of the manual, then inside every Section and inside every Chapter. An alphabetical Index is included at the
end of a Chapter. Page number references are included for every piece of technical information listed in the Chapter
Contents or Chapter Index.
Each Chapter is divided into four Information types:
• Technical Data (specifications) for all the mechanical, electrical or hydraulic devices, components and, assemblies.
• Functional Data (how it works) for all the mechanical, electrical or hydraulic devices, components and assemblies.
• Diagnostic Data (fault codes, electrical and hydraulic troubleshooting) for all the mechanical, electrical or hydraulic
devices, components and assemblies.
• Service Data (remove disassembly, assemble, install) for all the mechanical, electrical or hydraulic devices, com-
ponents and assemblies.
Sections
Sections are grouped according to the main functions or a systems on the machine. Each Section is identified by a
number 00, 35, 55, etc. The amount of Sections included in the manual will depend on the type and function of the
machine that the manual is written for. Each Section has a Contents page listed in alphabetic/numeric order. This
table illustrates which Sections could be included in a manual for a particular product.
PRODUCT
Tractors
Vehicles with working arms: backhoes, excavators,
skid steers, ….
Combines, forage harvesters, balers, ….
Seeding, planting, floating, spraying
equipment, ….
SECTION Mounted equipment and tools, ….
00 - Maintenance
05 - Machine completion and equipment
10 - Engine
14 - Main gearbox and drive
18 - Clutch
21 - Transmission
23 - Four wheel drive system
25 - Front axle system
27 - Rear axle system
29 - Hydrostatic drive
31 - Implement power take-off
33 - Brakes and controls
35 - Hydraulic systems
36 - Pneumatic system
37 - Hitches, drawbars and implement couplings
39 - Frames and ballasting
41 - Steering
44 - Wheels
46 - Steering clutches
48 - Tracks and track suspension
50 - Cab climate control
55 - Electrical systems
56 - Grape harvester shaking
58 - Attachments/headers
60 - Product feeding
61 - Metering system
62 - Pressing - Bale formation
47663637 18/02/2014
5
10. INTRODUCTION
63 - Chemical applicators
64 - Chopping
66 - Threshing
68 - Tying/Wrapping/Twisting
69 - Bale wagons
70 - Ejection
71 - Lubrication system
72 - Separation
73 - Residue handling
74 - Cleaning
75 - Soil preparation/Finishing
76 - Secondary cleaning / Destemmer
77 - Seeding
78 - Spraying
79 - Planting
80 - Crop storage / Unloading
82 - Front loader and bucket
83 - Telescopic single arm
84 - Booms, dippers and buckets
86 - Dozer blade and arm
88 - Accessories
89 - Tools
90 - Platform, cab, bodywork and decals
47663637 18/02/2014
6
12. Engine - Engine air compressor
Air compressor - Static description
TC5070 WE
TC5080 WE
The air compressor (3) is a single cylinder, gear driven air compressor, which supplies air to a reservoir tank, enabling
the operator to have a source of compressed air for cleaning purposes and tyre inflation. The compressor is mounted
directly on the engine with the two nuts (10).
Engine oil is supplied through an internal connection with the engine, using engine oil pressure to lubricate the com-
pressor.
The compressed air is delivered through tubing to a combination pressure relief control valve, and from there to the
reservoir tank located on the straw hood of the combine. A quick disconnect fitting allows easy connection to the air
supply for blow off nozzles as well as for tyre inflation equipment.
ZEIL06CS0085A0B 1
47663637 18/02/2014
10.1 [10.450] / 3
13. Engine - Engine air compressor
Air compressor - Drawing
TC5070 WE
TC5080 WE
ZEIL11CX0668G0B 1
Reference Port Port Name Port Function
1 0 Inlet Port Supplies Compressor with clean intake air
2 2 Discharge Port Expels pressurized air for system
4 8.1 Oil Supply Supplies compressor with lube oil from engine
5 8.2 Oil Drain Allows lube oil to return to engine
6 9.1 Coolant Receive coolant from engine
7 9.2 Coolant Return coolant to engine
47663637 18/02/2014
10.1 [10.450] / 4
14. Engine - Engine air compressor
Compressed air tank Relief valve - Drawing
TC5070 WE
TC5080 WE
ZEIL11CX0667G0B 1
Reference Port Port name Port function
1 1 Inlet Pressurized air "in" from compressor
2 21 Outlet Pressurized air "out" to reservoir tank and blow
off line quick connect port
3 22 Auxiliary supply Auxiliary port not used in this application
4 1-2 Tire inflation device Port used to connect tire inflation device
5 3 Exhaust for compressor idling Discharge exhaust for excess pressure in system
47663637 18/02/2014
10.1 [10.450] / 5
15. Engine - Engine air compressor
Compressed air tank Relief valve - Static description
TC5070 WE
TC5080 WE
The pressure relief valve is developed to protect the system against pressures higher than 8 bar ( 116 psi).
Port (1) is connected to the air compressor, port (21) is connected to the pressurized reservoir.
When the pressure on port (21) reaches 8 bar ( 116 psi), the control valve (9d) will be activated which means that
also control valve (9c) will be activated. The pressure from the compressor will now pass through port (3).
If the pressure drops below 8 bar ( 116 psi) by activation a engaging valve, control valve (9d) will close.
Valve (9c) will not close immediately but will remain in the open position until the pressure exerted on the control of
valve (9c) will be reduced by 0.6 bar ( 8.7 psi). Then the air will pass through valve (9b).
Schematic diagram
ZDA7672Z 1
47663637 18/02/2014
10.1 [10.450] / 6
16. Engine - Engine air compressor
Air compressor - Remove
TC5070 WE
TC5080 WE
1. Bleed the air from the system by opening the drain (2)
at the bottom of the air reservoir.
ZEIL06TC00034A0 1
2. Loosen the retaining strap (1) and remove the air inlet
pipe (2) from the air compressor (3).
NOTE: Protect the air inlet and outlet ports from dirt
ingress.
3. Loosen the connection (4) to remove the hose (5) from
the air compressor (3).
ZEIL06CS0082A0B 2
4. Drain sufficient coolant from the engine cooling system
to allow removal of the coolant lines.
NOTE: Refer to the Operator’s Manual of your machine.
5. Loosen the connection (6).
ZEIL06CS0083A0B 3
6. Loosen the connection (7).
7. Remove the four bolts (8) to remove the support (9).
ZEIL06CS0084A0B 4
47663637 18/02/2014
10.1 [10.450] / 7
17. Engine - Engine air compressor
8. Remove the two nuts (10) to remove the air compressor
(3) from the engine.
ZEIL06CS0085A0B 5
47663637 18/02/2014
10.1 [10.450] / 8
18. Engine - Engine air compressor
Air compressor - Install
TC5070 WE
TC5080 WE
1. Install the air compressor (3) on the engine and tighten
the two nuts (10).
ZEIL06CS0085A0B 1
NOTE: Make sure that the O-ring (11) is positioned well. If
necessary apply grease.
ZEIL06CS0086A0B 2
2. Install the support (9) with the four bolts (8).
3. Install the tube and tighten the connection (7).
ZEIL06CS0084A0B 3
4. Install the tube and tighten the connection (6).
ZEIL06CS0083A0B 4
47663637 18/02/2014
10.1 [10.450] / 9
19. Engine - Engine air compressor
5. Install the hose (5) on the air compressor (3) and
tighten the connection (4).
6. Install the pipe (2) on the air compressor (3) and tighten
the retaining strap (1).
ZEIL06CS0082A0B 5
7. Close the drain (2) at the bottom of the reservoir.
8. Add engine coolant to the cooling system, refer to the
Operator’s Manual for more details.
9. Start the engine to charge the system with air. Allow the
air system to build up pressure to the governor cutout.
Stop the engine and use a soap and water solution at
the connection points to check for air leaks. Make any
necessary repairs.
ZEIL06TC00034A0 6
47663637 18/02/2014
10.1 [10.450] / 10
20. Transmission - Mechanical transmission
Mechanical transmission - Remove
TC5070 WE
TC5080 WE
NOTICE: Before removing any components, secure the machine safely in place by placing adequate wedges against
both traction and steering wheels.
1. On the left-hand side, remove the required covers by
loosening the bolts.
RNIL08TC0029A0A 1
2. Loosen the hose clamps (1) and (2).
RNIL08TC0030A0B 2
3. Support the hydrostatic motor (1) and loosen the four
nuts (2). (only two nuts are shown)
Pull the hydrostatic motor (1) out of the gearbox.
NOTE: In some cases it will be necessary to remove the
LHS traction wheel for taking the hydrostatic motor out of
the gearbox.
ZDA7815A 3
47663637 18/02/2014
21.1 [21.114] / 8
21. Transmission - Mechanical transmission
4. Disconnect the hand brake cable (1) by removing the
bolt.
RNIL08TC0031A0B 4
5. Disconnect the combine speed sensor (1).
RNIL08TC0032A0B 5
6. Disconnect the gearshift bar (4).
ZDA7817A 6
7. Disconnect the sleeves (1) and the brake lines on both
sides of the traction gearbox.
CAUTION
The gearbox is heavy (380 kg [838 lbs]). Take extreme
caution when removing the gearbox! Use a supporting
device which can handle this weight!
Z022
RNIL08TC0033A0B 7
47663637 18/02/2014
21.1 [21.114] / 9
22. Transmission - Mechanical transmission
8. Loosen the three bolts (1) at both sides of traction gear-
box.
Lower the traction gearbox and remove it from under-
neath the combine.
ZDA7818A 8
47663637 18/02/2014
21.1 [21.114] / 10
23. Transmission - Mechanical transmission
Mechanical transmission - Install
TC5070 WE
TC5080 WE
1. Bring the traction gearbox onto his place.
On both sides of the traction gearbox, install the three
bolts (1).
NOTE: Apply Loctite 242 (OMNIFIT 50M, PERMABOND
113) onto the bolts (1).
ZDA7818A 1
2. Connect the sleeves (1) and the brake lines on both
sides of the traction gearbox.
RNIL08TC0033A0B 2
3. Connect the gearshift bar (4).
Adjust, if necessary, refer to Shifting disk system -
Adjust Bar (21.145).
ZDA7817A 3
47663637 18/02/2014
21.1 [21.114] / 11
24. Transmission - Mechanical transmission
4. Connect the ground speed sensor (1).
RNIL08TC0032A0B 4
5. Connect the hand brake cable (1).
Adjust, if necessary, refer to Brake pedals - Adjust
(33.202).
RNIL08TC0031A0B 5
6. Support the weight of the hydrostatic motor (1).
Raise the motor into position on the traction gearbox.
Apply grease onto the spline shaft of the motor (1).
Engage the spline shaft of the motor and push it into
the female spline until the mounting flange is against
the transmission.
Install the four nuts (2).
NOTE: Before install the four nuts, apply Loctite 270 (OM-
NIFIT 200M, PERMABOND 118).
ZDA7815A 6
7. Install the hose clamps (1) and (2).
RNIL08TC0030A0B 7
47663637 18/02/2014
21.1 [21.114] / 12
25. Transmission - Mechanical transmission
8. Install the removed covers and tighten the bolts.
RNIL08TC0029A0A 8
Next operation:
Hydraulic service brakes - Bleed (33.202).
47663637 18/02/2014
21.1 [21.114] / 13
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Transmission - Mechanical transmission external controls
Transmission housing cover - Disassemble
TC5060 WE
NOTE: Refer to Shifting disk system - Exploded view (21.145)
1. Loosen the drain plug and drain the oil from the gear-
box. Refer to the Operator's Manual: "SECTION 4
- LUBRICATION AND MAINTENANCE" paragraph
headed: "Traction gearbox".
2. Loosen the plug (112) with the seal ring (113) and the
breather (114).
ZEIL08TC0466A0B 1
3. Loosen the bolts (2) and remove the cover (1) of the
gearbox.
ZEIL08TC0303A0B 2
4. Loosen the bolt (3) from the gear shift finger (6).
ZEIL08TC0463A0B 3
47663637 18/02/2014
21.2 [21.130] / 10
28. Transmission - Mechanical transmission external controls
5. Remove the gear shift shaft (4) from the cover (1).
NOTICE: When removing the plate (5), mark it because it
is not symmetrical.
6. Remove the plate (5) and the gear shift finger (6) from
the cover (1).
ZEIL08TC0305A0B 4
7. Remove the shaft seals (7) from the cover (1) using a
screw driver.
ZEIL08TC0306A0B 5
47663637 18/02/2014
21.2 [21.130] / 11
29. Transmission - Mechanical transmission external controls
Transmission housing cover - Assemble
TC5060 WE
NOTE: Refer to Shifting disk system - Exploded view (21.145)
1. Install both shaft seals (7) in the cover (1).
ZEIL08TC0462A0B 1
NOTICE: The plate (5) must be assembled in such a way that the teeth are in a centralized position in relation to the
cover.
2. Position the gear shift finger (6) and the plate (5).
3. Install the gear shift shaft (4), fix as shown the gear shift
finger (6) with the bolt (3) using LOCTITE® 243. Tighten
with a torque of 46 Nm (33.9 lb ft).
ZEIL08TC0463A0B 2
4. Install the cover (1) applying LOCTITE® 574 on the con-
tact surface and fix it with the bolts (2), tighten with a
torque of 23 Nm (17.0 lb ft).
ZEIL08TC0465A0B 3
47663637 18/02/2014
21.2 [21.130] / 12
30. Transmission - Mechanical transmission external controls
5. Install the plug (112) with the seal ring (113) in the cover
(1). Tighten the plug (112) with a torque of 200 N·m
(147.5 lb ft).
6. Install the breather (114) on the plug (112) and tighten
with a torque of 12.1 N·m (8.9 lb ft).
ZEIL08TC0466A0B 4
7. Install the drain plug (115) and the level plug (121) and
tighten with a torque of 50 Nm (36.9 lb ft).
Fill the gearbox (9) with oil. Refer to the Operator's
Manual: "SECTION 4 - LUBRICATION AND MAINTE-
NANCE" paragraph headed: "Traction gearbox".
ZEIL08TC0467A0B 5
47663637 18/02/2014
21.2 [21.130] / 13