Dan D Drilling is an Oklahoma-based drilling contractor that operates rigs in Oklahoma, Kansas, and Texas. It aims to distinguish itself through cost-conscious and competent drilling services while prioritizing safety. Dan D Drilling maintains a fleet of mobile and cantilever rigs with similar designs to minimize costs and footprint. Safety is a key emphasis, with rig designs and experienced crews helping to eliminate accidents during rig moves and operations.
Most likely used in every construction business, the front loader is a heavy machinery that has many uses, form demolition to moving sand and rocks. In this catalog you can see some of the new front loaders offered on machines4u.com.au
The document provides information about AMSOIL synthetic motor oils, including:
- AMSOIL set new standards for synthetic motor oil in 1972 as the first to meet API standards.
- AMSOIL's testing laboratory allows it to stay on the cutting edge of lubrication technology through extensive testing.
- AMSOIL offers a range of synthetic motor oils suitable for different drain intervals and use cases, from Signature Series for maximum drain intervals to OE oils for manufacturer-recommended intervals.
Hyster l006 (h6.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and disconnecting brake, cooling and driveline components.
Hyster k006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT and H7.0FT, including:
- Lift capacities of 6123kg and 7030kg respectively
- Tire sizes of 8.25x15 for both drive and steer tires
- Fluid capacities for fuel, engine oil, hydraulic oil, and other components
- Electrical system specifications including alternator outputs and battery details
- Transmission oil pressures and relief valves
- Steering system details like relief pressure and turning radius
- Instructions for removing the drive axle, draining fluids, and disconnecting brake and cooling lines.
Hyster e024 (s155 ft) forklift service repair manualfjskefkksem
This document provides specifications for lift truck models including capacities, weights, tire sizes, fluid quantities and types. It outlines the lifting capacity, counterweight, fuel tank capacity, engine oil quantities, transmission oil quantities, hydraulic oil capacity and relief pressures for various lift truck models. Fluid specifications like oil viscosity grades tailored to temperature ranges are also provided.
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
Most likely used in every construction business, the front loader is a heavy machinery that has many uses, form demolition to moving sand and rocks. In this catalog you can see some of the new front loaders offered on machines4u.com.au
The document provides information about AMSOIL synthetic motor oils, including:
- AMSOIL set new standards for synthetic motor oil in 1972 as the first to meet API standards.
- AMSOIL's testing laboratory allows it to stay on the cutting edge of lubrication technology through extensive testing.
- AMSOIL offers a range of synthetic motor oils suitable for different drain intervals and use cases, from Signature Series for maximum drain intervals to OE oils for manufacturer-recommended intervals.
Hyster l006 (h6.0 ft europe) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT, H7.0FT, H8.0FT, and H9.0FT, including:
- Lifting capacities and weights for each model
- Tire sizes, fuel capacities, fluid capacities and specifications for various systems
- Transmission oil pressures and relief pressures for hydraulic and steering systems
- Procedures for removing the drive axle, including draining fluids and disconnecting brake, cooling and driveline components.
Hyster k006 (h6.0 ft) forklift service repair manualhhjsekmdmm
This document provides specifications and service information for Hyster lift truck models H6.0FT and H7.0FT, including:
- Lift capacities of 6123kg and 7030kg respectively
- Tire sizes of 8.25x15 for both drive and steer tires
- Fluid capacities for fuel, engine oil, hydraulic oil, and other components
- Electrical system specifications including alternator outputs and battery details
- Transmission oil pressures and relief valves
- Steering system details like relief pressure and turning radius
- Instructions for removing the drive axle, draining fluids, and disconnecting brake and cooling lines.
Hyster e024 (s155 ft) forklift service repair manualfjskefkksem
This document provides specifications for lift truck models including capacities, weights, tire sizes, fluid quantities and types. It outlines the lifting capacity, counterweight, fuel tank capacity, engine oil quantities, transmission oil quantities, hydraulic oil capacity and relief pressures for various lift truck models. Fluid specifications like oil viscosity grades tailored to temperature ranges are also provided.
Hyster u005 (h80 ft) forklift service repair manualfhjsekkemm
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, electrical components, transmission oil pressures, hydraulic relief pressures, and steering details.
3) The document is a service manual containing technical specifications to aid in repair work for these lift truck models.
Hyster r005 (h4.0 ft5 europe) forklift service repair manualfhjsekkemm
This document provides specifications for service and repair of Hyster lift truck models H4.0FT5 through H5.5FT, including:
- Lifting capacities ranging from 3,629 to 5,443 kg
- Counterweight weights ranging from 2,172 to 3,294 kg
- Tire sizes for drive and steer tires
- Fuel, engine oil, coolant, hydraulic oil, and other fluid capacities
- Electrical system specifications like battery voltage and alternator output
- Transmission and hydraulic system relief pressures
EDRILL-1 is a self-erecting tender assist drilling rig combining a lightweight drilling equipment set (DES) with an upsized deep-draft barge. The DES can be handled in three lifts to reduce rig move times, while the large barge supports batch drilling and completions. EDRILL-1 is well-suited for production drilling and completions in regions like Southeast Asia, Western Australia, West Africa, Gulf of Mexico or Brazil. It features a 400MT crane, 170-person accommodation, three 1,600HP mud pumps, and can operate in up to 250m water depths.
This document provides an overview of Sandfits Foundries (P) Ltd, including its timeline since 1962, organizational hierarchy, production facilities, product portfolio, clientele, and financial statistics. Sandfits manufactures grey and ductile iron castings and sub-assemblies for automotive, earth moving, wind energy, and other sectors. It has two production units with green sand and resin sand molding capabilities. Key clients include Iljin Automotive, TAFE, Ashok Leyland, and Kirloskar Toyota. The company aims to further automate processes and expand its offerings.
B&R Equipment Rental equipment List 2nd qtr 2015Kevin Cook
B&R Equipment Company provides a wide range of heavy construction equipment for rent, sale, and service. Their inventory includes excavators ranging from 50,000 to 105,000 pounds, dozers from 110 to 325 horsepower, motor graders with 14 foot blades, wheel and crawler loaders, articulated trucks up to 40 tons, compactors, scrapers, and water trucks from 2,000 to 8,500 gallon capacities. B&R offers equipment rentals, sales, hauling, field and shop repairs, and mobile equipment cleaning services.
Archer's modular drilling rig (MDR) solution offers operational flexibility and cost efficiency unmatched in the modular offshore drilling rig market. The MDR package can be tailored for specific well requirements and provides an alternative to mobile offshore drilling units and traditional platform rigs. Archer currently owns and operates two MDR units, the Archer Emerald and Archer Topaz. The MDR utilizes an innovative modular design with a minimum crew of 16 and light module weights. Key features include a patented self-erecting mast system, 400 short ton pull capability, and efficient rig-up/down times.
This document provides details about the author's profile and experience working at FLSmidth, including a list of clients and projects. It then describes the capabilities and design process for machine types like stackers, reclaimers, and ship unloaders. Specific project details and diagrams are given for various stacker and reclaimer machines designed for clients like Worsley, Grootegaluk, Adani, VSP, and NALCO. The document outlines the design inputs, standards, calculations, analysis, and outputs for a general bucket wheel stacker reclaimer machine.
The Deepwater Nautilus is an ultra-deepwater semi-submersible drilling rig capable of drilling in up to 9,600 feet of water. It was constructed in 2000 by Hyundai Heavy Industries in South Korea for Transocean and upgraded in 2007. Key specifications include a maximum drilling depth of 30,000 feet, accommodations for 166 persons, variable deck load capacity of 9,701 tons, and the ability to drill in water depths up to 8,000 feet. The rig is equipped with a 180 foot derrick, 1,000 ton top drive, mud pumps capable of 7,500 psi, and a 21 inch marine riser. Station keeping is provided by a 12 point mooring system and
The document provides information on training for the TDS-11S top drive system. It includes sections on safety, top drive development history, system features and advantages, specifications, dimensions, installation, consumables, lubrication schedules, and typical mast interfaces. The document contains detailed diagrams, charts, and specifications to outline the components, operation, and maintenance of the TDS-11S top drive.
In this presentation we will be learning about the terms used in the drillship specifications
the sample drillship taken for this presentation belongs to transocean which is used at KG1 and KG2
we are engaged in fabricating a wide range of processing machine such as Coco Peat Machines, Coir Extraction Machines, Coir Geo Textile Machines and many more. Holding an ample industrial experience, we have innovate a range of processing machine which are used for extraction, processing, and feeding to extract coir fiber and produce horticulture, Geo textiles and Coconut shell products.
This document provides an update on an advanced counter-rotating disk wing aircraft concept being developed by Diversitech, Inc. Key points include:
- FLOPS analysis was performed to analyze the fixed wing mission capabilities. Results showed a maximum speed of 300 knots and range of 650 nm for a 26ft diameter disk.
- Rotor blade sizing was determined to provide vertical lift for take-off and landing, with a 26ft diameter rotor designed using 650shp of available engine power.
- Aerodynamic analysis of the disk wing profile was conducted using DATCOM, showing it can provide sufficient lift at take-off speed with 12 degrees angle of attack using a 26ft diameter disk.
This document summarizes information about different types of generators manufactured by BHEL, including their cooling methods, power ratings, and experience. It describes air cooled, hydrogen cooled, and hydrogen/water cooled generators. The power range for generators is 80 MW to 1000 MW. Details are provided about components, testing facilities, and manufacturing capabilities for 500 MW, 600-800 MW, and future higher rated generators. Modernization efforts include a new test bed for generators up to 1000 MW.
This document is a curriculum vitae for Harshadkumar R Patel, a mechanical engineer from Ahmedabad, India. It details his career history working in rig management and installation management roles from 2012-2015 and 2006-2012 respectively, along with previous roles as a senior tool pusher, driller, and assistant driller dating back to 1989. It also lists the training courses and qualifications he has completed throughout his career.
The document discusses plans for an underground cavern project in India to store crude oil. It will involve engineering, construction, and operation of systems to receive, pump, meter, heat, treat wastewater, produce utilities, and operate buildings for crude oil storage. Underground caverns are considered safe for storing hydrocarbons. The project will help India meet oil demand for 15 days in an emergency by storing 136 million barrels of crude oil in strategic reserves along coasts by 2020.
The document provides specifications for the Ranger Timbco TS820-D skidder. It lists dimensions, weights, engine specifications, hydraulic system details, and ground pressure information for different tire configurations. The skidder has a Cummins C8.3-C 260HP engine and features include a 25 square foot arch grapple and cab with ROPS/FOPS certification for operator protection.
(https://www.indiamart.com/srikrishna-enterprises) We are one of the leading organizations engaged in manufacturing and exporting of Automotive Parts, Automotive Components, Automotive Valves. Our main business is parts for replacement market for Volvo, Mercedes, Scania, Tatra.
Prospect Mold is a tooling company established in 1945 with 3 manufacturing facilities totaling 114,000 square feet. They have 134 employees and $40 million in annual sales. They specialize in injection tooling for automotive, aerospace, and consumer goods industries. Their capabilities include multi-shot molds, die casting molds, and they have extensive CNC and inspection equipment. Their goal is to form long term partnerships and deliver innovative solutions that enhance value and profits for their customers.
The document summarizes Diesel Locomotive Works (DLW) in Varanasi, India. DLW was set up in 1961 in collaboration with American Locomotive Company to produce diesel locomotives for Indian Railways. It has an annual production capacity of 275 locomotives and over 7,000 employees. The document describes DLW's workshops and manufacturing processes for components like engines, bogies, and locomotive assembly. Key operations include machining, welding, heat treatment, and engine testing. Locomotives are identified by codes describing their specifications, such as the WDM3A denoting a 3,100 horsepower broad gauge diesel mixed traffic locomotive.
This document provides specifications for the AOR-1, a 400 foot water depth rated jack-up drilling rig built in 2013 featuring enhanced mud systems, improved deck layouts, greater capacities, upgraded safety equipment, and accommodation for 150 men. Technical details include dimensions, leg length, variable load capacity, storage capacities for fuel, water, and drilling mud, power systems, drilling equipment such as the derrick, drawworks, top drive, and BOP stack, and lifting equipment.
(www.dthdrillingrig.com) Backed by rich industry experience of three decades, we are able to establish ourselves as a leading organization in the field of designing, manufacturing and exporting a wide range of Water Drilling Rigs, Mining Rigs and Equipment. These are known for their high performance & speed, handling capacity, sturdy construction, and energy saving features. Available in both standard and customized specifications, these Rigs and Equipment meet the application requirements of water wells, mineral exploration, core drilling, reverse circulation, and multipurpose drilling.
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
EDRILL-1 is a self-erecting tender assist drilling rig combining a lightweight drilling equipment set (DES) with an upsized deep-draft barge. The DES can be handled in three lifts to reduce rig move times, while the large barge supports batch drilling and completions. EDRILL-1 is well-suited for production drilling and completions in regions like Southeast Asia, Western Australia, West Africa, Gulf of Mexico or Brazil. It features a 400MT crane, 170-person accommodation, three 1,600HP mud pumps, and can operate in up to 250m water depths.
This document provides an overview of Sandfits Foundries (P) Ltd, including its timeline since 1962, organizational hierarchy, production facilities, product portfolio, clientele, and financial statistics. Sandfits manufactures grey and ductile iron castings and sub-assemblies for automotive, earth moving, wind energy, and other sectors. It has two production units with green sand and resin sand molding capabilities. Key clients include Iljin Automotive, TAFE, Ashok Leyland, and Kirloskar Toyota. The company aims to further automate processes and expand its offerings.
B&R Equipment Rental equipment List 2nd qtr 2015Kevin Cook
B&R Equipment Company provides a wide range of heavy construction equipment for rent, sale, and service. Their inventory includes excavators ranging from 50,000 to 105,000 pounds, dozers from 110 to 325 horsepower, motor graders with 14 foot blades, wheel and crawler loaders, articulated trucks up to 40 tons, compactors, scrapers, and water trucks from 2,000 to 8,500 gallon capacities. B&R offers equipment rentals, sales, hauling, field and shop repairs, and mobile equipment cleaning services.
Archer's modular drilling rig (MDR) solution offers operational flexibility and cost efficiency unmatched in the modular offshore drilling rig market. The MDR package can be tailored for specific well requirements and provides an alternative to mobile offshore drilling units and traditional platform rigs. Archer currently owns and operates two MDR units, the Archer Emerald and Archer Topaz. The MDR utilizes an innovative modular design with a minimum crew of 16 and light module weights. Key features include a patented self-erecting mast system, 400 short ton pull capability, and efficient rig-up/down times.
This document provides details about the author's profile and experience working at FLSmidth, including a list of clients and projects. It then describes the capabilities and design process for machine types like stackers, reclaimers, and ship unloaders. Specific project details and diagrams are given for various stacker and reclaimer machines designed for clients like Worsley, Grootegaluk, Adani, VSP, and NALCO. The document outlines the design inputs, standards, calculations, analysis, and outputs for a general bucket wheel stacker reclaimer machine.
The Deepwater Nautilus is an ultra-deepwater semi-submersible drilling rig capable of drilling in up to 9,600 feet of water. It was constructed in 2000 by Hyundai Heavy Industries in South Korea for Transocean and upgraded in 2007. Key specifications include a maximum drilling depth of 30,000 feet, accommodations for 166 persons, variable deck load capacity of 9,701 tons, and the ability to drill in water depths up to 8,000 feet. The rig is equipped with a 180 foot derrick, 1,000 ton top drive, mud pumps capable of 7,500 psi, and a 21 inch marine riser. Station keeping is provided by a 12 point mooring system and
The document provides information on training for the TDS-11S top drive system. It includes sections on safety, top drive development history, system features and advantages, specifications, dimensions, installation, consumables, lubrication schedules, and typical mast interfaces. The document contains detailed diagrams, charts, and specifications to outline the components, operation, and maintenance of the TDS-11S top drive.
In this presentation we will be learning about the terms used in the drillship specifications
the sample drillship taken for this presentation belongs to transocean which is used at KG1 and KG2
we are engaged in fabricating a wide range of processing machine such as Coco Peat Machines, Coir Extraction Machines, Coir Geo Textile Machines and many more. Holding an ample industrial experience, we have innovate a range of processing machine which are used for extraction, processing, and feeding to extract coir fiber and produce horticulture, Geo textiles and Coconut shell products.
This document provides an update on an advanced counter-rotating disk wing aircraft concept being developed by Diversitech, Inc. Key points include:
- FLOPS analysis was performed to analyze the fixed wing mission capabilities. Results showed a maximum speed of 300 knots and range of 650 nm for a 26ft diameter disk.
- Rotor blade sizing was determined to provide vertical lift for take-off and landing, with a 26ft diameter rotor designed using 650shp of available engine power.
- Aerodynamic analysis of the disk wing profile was conducted using DATCOM, showing it can provide sufficient lift at take-off speed with 12 degrees angle of attack using a 26ft diameter disk.
This document summarizes information about different types of generators manufactured by BHEL, including their cooling methods, power ratings, and experience. It describes air cooled, hydrogen cooled, and hydrogen/water cooled generators. The power range for generators is 80 MW to 1000 MW. Details are provided about components, testing facilities, and manufacturing capabilities for 500 MW, 600-800 MW, and future higher rated generators. Modernization efforts include a new test bed for generators up to 1000 MW.
This document is a curriculum vitae for Harshadkumar R Patel, a mechanical engineer from Ahmedabad, India. It details his career history working in rig management and installation management roles from 2012-2015 and 2006-2012 respectively, along with previous roles as a senior tool pusher, driller, and assistant driller dating back to 1989. It also lists the training courses and qualifications he has completed throughout his career.
The document discusses plans for an underground cavern project in India to store crude oil. It will involve engineering, construction, and operation of systems to receive, pump, meter, heat, treat wastewater, produce utilities, and operate buildings for crude oil storage. Underground caverns are considered safe for storing hydrocarbons. The project will help India meet oil demand for 15 days in an emergency by storing 136 million barrels of crude oil in strategic reserves along coasts by 2020.
The document provides specifications for the Ranger Timbco TS820-D skidder. It lists dimensions, weights, engine specifications, hydraulic system details, and ground pressure information for different tire configurations. The skidder has a Cummins C8.3-C 260HP engine and features include a 25 square foot arch grapple and cab with ROPS/FOPS certification for operator protection.
(https://www.indiamart.com/srikrishna-enterprises) We are one of the leading organizations engaged in manufacturing and exporting of Automotive Parts, Automotive Components, Automotive Valves. Our main business is parts for replacement market for Volvo, Mercedes, Scania, Tatra.
Prospect Mold is a tooling company established in 1945 with 3 manufacturing facilities totaling 114,000 square feet. They have 134 employees and $40 million in annual sales. They specialize in injection tooling for automotive, aerospace, and consumer goods industries. Their capabilities include multi-shot molds, die casting molds, and they have extensive CNC and inspection equipment. Their goal is to form long term partnerships and deliver innovative solutions that enhance value and profits for their customers.
The document summarizes Diesel Locomotive Works (DLW) in Varanasi, India. DLW was set up in 1961 in collaboration with American Locomotive Company to produce diesel locomotives for Indian Railways. It has an annual production capacity of 275 locomotives and over 7,000 employees. The document describes DLW's workshops and manufacturing processes for components like engines, bogies, and locomotive assembly. Key operations include machining, welding, heat treatment, and engine testing. Locomotives are identified by codes describing their specifications, such as the WDM3A denoting a 3,100 horsepower broad gauge diesel mixed traffic locomotive.
This document provides specifications for the AOR-1, a 400 foot water depth rated jack-up drilling rig built in 2013 featuring enhanced mud systems, improved deck layouts, greater capacities, upgraded safety equipment, and accommodation for 150 men. Technical details include dimensions, leg length, variable load capacity, storage capacities for fuel, water, and drilling mud, power systems, drilling equipment such as the derrick, drawworks, top drive, and BOP stack, and lifting equipment.
(www.dthdrillingrig.com) Backed by rich industry experience of three decades, we are able to establish ourselves as a leading organization in the field of designing, manufacturing and exporting a wide range of Water Drilling Rigs, Mining Rigs and Equipment. These are known for their high performance & speed, handling capacity, sturdy construction, and energy saving features. Available in both standard and customized specifications, these Rigs and Equipment meet the application requirements of water wells, mineral exploration, core drilling, reverse circulation, and multipurpose drilling.
Similar to New Dan D Drilling Info Slide Share (20)
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...BBPMedia1
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Dive into this presentation and learn about the ways in which you can buy an engagement ring. This guide will help you choose the perfect engagement rings for women.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
HR search is critical to a company's success because it ensures the correct people are in place. HR search integrates workforce capabilities with company goals by painstakingly identifying, screening, and employing qualified candidates, supporting innovation, productivity, and growth. Efficient talent acquisition improves teamwork while encouraging collaboration. Also, it reduces turnover, saves money, and ensures consistency. Furthermore, HR search discovers and develops leadership potential, resulting in a strong pipeline of future leaders. Finally, this strategic approach to recruitment enables businesses to respond to market changes, beat competitors, and achieve long-term success.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
4 Benefits of Partnering with an OnlyFans Agency for Content Creators.pdfonlyfansmanagedau
In the competitive world of content creation, standing out and maximising revenue on platforms like OnlyFans can be challenging. This is where partnering with an OnlyFans agency can make a significant difference. Here are five key benefits for content creators considering this option:
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
2. Dan D Drilling is an Oklahoma based drilling contractor providing drilling services to the petroleum industry.
Founded in 1999, Dan D Drilling currently maintains drilling operations in Oklahoma, Kansas, and Texas.
Our goal is to distinguish ourselves by performing our drilling services in a cost conscious and competent manner.
We are further dedicated to developing the finest group of committed and competent drilling professionals in this industry.
Dan D Drilling, demands integrity and professionalism from it’s personnel and is committed to excellence in the performance of it’s services to the operator.
In starting this company, the emphasis has been on building and acquiring equipment that is similar and utilizes the same basic design.
We utilize both mobile (Carrier mounted) and standard cantilever type rigs.
The majority of rigs operated by Dan D Drilling are of a mobile type design.
This similar design applies to the carriers, derricks, substructures, pit systems, fuel systems, generator systems and mud pump systems.
These rigs allow us the capacities we require and have a much smaller “footprint” than standard conventional rig. These rigs also allow us the ability to minimize the costs of mobilization / de
All of the pit systems, substructures, fuel systems, generator and pump systems are designed to be interchangeable.
We strive for balance in the design of all of our rigs and equipment.
By design, our rigs have also aided in our safety program.
We place an added emphasis on safety during rig moves since; the majorities of accidents occur during rig up and rig down.
Our rigs move in twenty (20) loads including drill pipe and drill collars and we have by design, been able to move and rig up in less than twenty four (24) hours.
The limited amount of loads, the simplicity of the rig up and rig down process and the experience of our crews has helped eliminate accidents.
Also, in developing our safety program, we have brought our entire program into compliance with all OSHA safety criteria and we now meet or exceed all federal and state safety requirements.
We hope this meets with your approval and if you have any questions, please contact us at your convenience.
We look forward to working with you in the future.
3. Rig 1
Rig 1 Inventory
Drawworks:
Cardwell KB 750 – 900 HP
Power:
(1) Detroit 16V71 engine, 1000 HP @ 1800 RPM
Mast and Substructure:
Cardwell, 112′ H -300,000# SHL,
Pump #1:
F 800 (800 HP) Triplex Pump – CAT D379 ( 750 HP)
Pump #2:
F 800 (800 HP) Triplex Pump – CAT D379 ( 750 HP)
Rotating and Traveling Equipment:
Century 17 ½” x 44″ Rotary Table
Ideco – 160 Ton Block, King 150 Ton Swivel,
ABB – Offshore Crown Block saver
B.O.P. Equipment:
Regan 10″ 3000 PSI Annular BOP
Generators:
(2) Two Detroit 60 Series w/ (2) 350 KW Generator2
Both In Utility House W/Quincy 325 Air Compressor
Mud Systems:
(1) 400 Barrel (One Pit) Mud System w/ (1) 300 Barrel Premix Pit
(1) – Linear Shale Shaker
Drill Pipe and Drill Collars:
8,500 – 4 ½” XH, Grade E 16.60# Drill Pipe
(16) – 6 1/4″OD x 2 1/4″ID Drill Collars with 4-1/2″ XH Connections
4. RIG 2
Drawworks:
Crane Corsair – 500
Power:
(1) Detroit 60 Series, 505 HP @ 1800 RPM
Mast and Substructure:
Crane – 112′ H – 300,000# SHL, 12’ substructure
900 Gal Fuel Tank
Pump #1:
F 800 (800 HP) Triplex Pump – Detroit 60 Series, (575 HP)
Pump #2:
F 800 (800 HP) Triplex Pump – Detroit 60 Series, (575 HP)
Rotating and Traveling Equipment:
Century – 17 ½”” x 44″ Rotary Table
National 160 Ton Block Shorty, King 150 Ton Swivel,
ABB – Offshore Crown Block saver
B.O.P. Equipment:
Regan 11″ – 3000 PSI Annular BOP
Generators:
(2) Detroit 60 Series w/ 350 KW Generator
Mud Systems:
(1) 500 Bbl (One Pit) Mud System w/ 350 Barrel Premix Pit and 30 Bbl Slug Pit (1) 350 Bbl
Water Tank
(1) Linear Shale Shaker
(1) 2 Cone Desander
Drill Pipe and Drill Collars:
8,000 – 4” FH, Grade S-135 Drill Pipe
(16) -6 1/4″OD x 2 1/4″ ID Drill Collars with XH Connections
5. RIG 7
Rig 7 Inventory
Drawworks:
Service King (1000 HP), Rated to 12,000’ with 4 ” Drill Pipe
Power:
(2) Detroit 60 Series Engines, 455 HP each @ 1800 RPM
Mast and Substructure:
Service King – 118′ H – 450,000# SHL, 15’ Adjustable substructure 16′ KB
Pump #1: F-1000 Triplex Pump –398 Cat
Pump #2: F-1000 Triplex Pump –398 Cat
Rotating and Traveling Equipment:
Century – 17 ½”” x 44″ Rotary Table
National 200 Ton Block Shorty, King 200 Ton Swivel,
ABB – Offshore Crown Block saver
B.O.P. Equipment:
Shaffer – 11″ – 3000# Double Ram BOP
Shaffer – 11″ – 3000# Annular BOP
Choke Manifold – 5000#
Generators:
(2) Detroit 60 Series Engines w/ Two(2) 350 KW Generator
Mud Systems:
(1) 700 Barrel (Two Pit) Mud System w/ 500 Barrel Premix Pit
(1) Linear Shale Shaker
(1) 2 Cone Desander
Drill Pipe and Drill Collars:
12,000’- 4’’ FH 14.6# Grade G Drill Pipe
(16) -6 1/4″OD x 2 1/4″ ID Drill Collars with XH Connections
6. RIG 8 Rig 8 Inventory
Drawworks:
Service King 1000 (1000 HP)
Power:
(2) Detroit 60 Series Engines, 455 HP each @ 1800 RPM
Mast and Substructure:
Service King – 118′ H – 450,000# SHL, 15’ Adjustable substructure 16′ KB
Pump #1:
F 1000 (1000) Triplex Pump – 398 Caterpillar, (1000 HP)
Pump #2:
F 1000 (1000 HP) Triplex Pump – 398 Caterpillar, (1000 HP)
Rotating and Traveling Equipment:
Century – 17 ½”” x 44″ Rotary Table
National 200 Ton Block Shorty, King 200 Ton Swivel,
ABB – Offshore Crown Block saver
B.O.P. Equipment:
Shaffer – 11” – 3000# Double Ram BOP
Shaffer – 11” – 3000# Annular BOP
Closing Unit:
5 Station-100 Gallon
Generators:
(2) Detroit 60 Series Engines w/ Two(2) 350 KW Generator
Mud Systems:
(1) 700 Barrel (Two Pit) Mud System w/ 500 Barrel Premix Pit
(2) Linear Shale Shaker
(1) 2 Cone Desander
Drill Pipe and Drill Collars:
12,000 – 4” FH, 14.00# Grade G Drill Pipe
(16) -6 1/4″OD x 2 1/4″ ID Drill Collars with XH Connections
7. RIG 19
Rig 19 Inventory
Drawworks:
Crown CC 750Power:
(2) 14L Series 60’s @ 620HP @ 1800 RPM
Mast and Substructure:
Crown Telescoping-118′ H, 350,000# SHL, 15′ H Telescoping Substructure
Pump #1:
National 9-P-100 (1000 HP) Triplex Pump-Caterpillar 3508B (1000 HP)
Pump #2:
National 9-P-100 (1000 HP) Triplex Pump-Caterpillar 3508B (1000 HP)
Pump #3:
TFI 1000 HP with 398 Caterpillar (900HP)
Rotating and Traveling Equipment:
17 ½”x44” ZP 175
Ideco-UTB 160 Ton Block/Hook Combo
Tesco 250 Ton XMI Top Drive
B.O.P. Equipment:
Shaffer – 11” 3000# Double Ram BOP
Shaffer – 11” 3000# Annular BOP
5000# Choke Manifold
Closing Unit:
5 Station-100 Gallon
Mud System:
(1) 1000 Barrel (Two Pit) Mud System w/75 Barrel Premix Pit
(2) Double Vortex Linear Motion Shaker-New Jan 2014
(1) 12 Cone Desilter
(1) 2 Cone Desander
(1) 400BBL Premix W 6″X8″ Pump
Drill Pipe and Drill Collars:
12,000’ – 4″ 14.0# FH, Grade G Drill Pipe
(16) -6 1/4“ X 2 1/4″ ID Drill Collars with XH Connections
8. RIG 9
Rig 9 Inventory
Drawworks:
Challenger 360
Power:
(2) Detroit 12V71 T Engines, 455 HP each @ 1800 RPM
Mast and Substructure:
Challenger 200 – 84′ H – 300,000# SHL, 10’ Adjustable substructure
Top Head Drive:
Venture Tech 150 Ton – Powered by Detroit 60 Series Engine (455 HP)
Pump #1:
F 1000 (1000 HP) Triplex Pump – Caterpillar 3508 (1000 HP)
Pump #2:
F 800 (800 HP) Triplex Pump –Detroit 60 Series Engine (575 HP)
Rotating and Traveling Equipment:
HT – 18″ x 44″ Rotary Table
B.O.P. Equipment:
Reagan – 10” – 3000 PSI Annular BOP
Generators:
(1) Caterpillar 3408 Engine w/ One (1) 285 KW Generator
(1) Detroit 60 Series Engine w/ One (1) 260 KW Generator
Mud Systems:
(1) 600 Barrel (Two Pit) Mud System w/ 5 Agitators and 200 Barrel Premix Pit
(1) FSI Linear Shale Shaker
(1) 2 Cone 10” Desander
Drill Pipe and Drill Collars:
9,000 – 4 “ FH, 14.0# Grade G Drill Pipe
9. AEXCO DEVIN ROSWOLD 303-831-9226
AVALON EXPLORATION ALLEN MIKELL 918-523-0600
CASILLAS PETROLEUM CORP GREG CASILLAS 918-582-5310
CBL RESOURCES DOUG CLARK 918-384-8009
CEJA CORPORATION DARREL ADAMS 580-761-1851
CHARTER OAK PRODUCTION JOE BREVETTI 405-286-0361
CIRRUS PRODUCTION RAY GILL 580-237-0002
CISCO OPERATING GARY HOLEMAN 432-661-1095
CRESCENT CONSULTING JOEL ACOSTA 405-441-4393
CMX CURTIS CLARK 316-269-9052
CRECO OPERATING JIM ALLEN 405-601-1140 EXT 3
CUMMINS OIL COMPANY BRENT CUMMINS 405-948-1818
D & J OIL RHETT SMITH 580-542-3636
EAGLE ENERGY W. WISNIEWSKI 281-635-6400
EEC INC JESS PORTER 405-321-2229
GULF OIL AL SALOME 405-203-8344
HINKLE OIL & GAS BRUCE HINKLE 405-642-1145
HUSKY VENTURES JERRY MCCRAW 580-421-3209
JERRY SCOTT OPERATING JERRY SCOTT 405-382-2202
LAWCO OPERATING JACK TARKINGTON 405-833-3777
M & M ENERGY MIKE MURPHY 405-620-7776
MUSTANG FUEL RAND PHIPPS 405-748-9400
NADEL & GUSSMAN DENNIS WEBB 918-583-3333
ORCA OPERATING, INC. JOE PAPAJOHN 918-587-3104 EXT 108
OSAGE RESOURCES JEFF DALE 620-930-8064
PABLO EXPLORATION GARY WURDEMAN 405-513-7121
PANTERA ENERGY BROOKS GENTRY 806-340-7623
PAUL GILLHAM OIL COMPANY PAUL GILLHAM 405-997-8549
PAYNE EXPLORATION CORPORATION TERRY DANIELS 405-843-9419
POSTROCK MIDCONTINENT TERRY CARTER 405-702-7420
PRIMEXX OPERATING RUSTY RAYBURN 214-675-0948
ROBERSON OIL COMPANY DAVE ROBERSON 580-421-2388
SK PLYMOuTH BOB KEY 918-629-0748
SPECIAL ENERGY JOHN SPECIAL 405-377-1177
SLAWSON EXPLORATION STEVE SLAWSON 405- 232-0201
TRES MANAGEMENT BRAD CROUCH 405-842-7888
LANCE RUFFEL RONNIE RILEY 405-248-6832
TCINA INC BERRY DOYAL 405-382-0399
TRANSPRO ENERGY GLENN GRIZZLE 405-364-4634
TRUEVINE OPERATING MIKE FLOWERS 580-427-7919
VERITAS ENERGY TERRY HENDERSON 580-761-3483
WICKLUND PETROLEUM TOM MEASON 918-640-1110
WOOLSEY OPERATION DEAN PATTISSON 316-640-4650
ARROWHEAD ENERGY BILL VARNER 405-640-0365
BARON EXPLORATION DAVE MAULDIN 405-341-1779
BRAVO CHARLIE STEPHENS 918-894-4440
CHAPARRAL ENERGY STEVE DONLEY 405-478-8770
CLAYTON WILLIAMS PHIL AMY 281-359-5511 EXT 4049
DEM OPERATIONS DON MUEGGE 580-388-4350
EARLSBORO ENERGY ROGER SLOAN 405-627-6291
EXOK, INC. STEVE MUNN 405-840-9196 EXT 118
KEENER OIL DEWEY BARTLETT JR. 918-587-4154 EXT 100
KIRKPATRICK OIL CHRIS HAUGEN 405-840-2882
MERIT ENERGY RYAN HUDDLESTON 972-628-1033
MURAS ENERGY RAJA REDDY 405-751-0442
O'BRIEN OIL ED O’BRIEN 405-613-9700
PEDESTAL OIL COMPANY, INC. TIM ALTENDORF 405-236-8596
RAMSEY ENGINEERING STEVE NICHOLS 405-302-6200
SPELLER OIL MIKE HULSEY 405-942-7869
TRIVESTCO STEVE STALCUP 918-576-9110
UNION VALLEY PAUL YOUNGBLOOD 580-237-3959
UNITED PRODUCTION JOE HAMRA 405-728-8900
KLO DAVE KAVACH 918-599-9327
ATCHLEY RESOUCES KIM LOCKWOOD 405-802-1776
ARROW OIL AND GAS BRAIN ENIS 405-249-9124
COVINGTON OIL AND GAS JOHN COVINGTON 405-623-1465
HUNTON OIL & GAS JIM CROWLEY 405-848-5545
REDLAND RESOURCES ALAN THROWER 405-627-1967
REDTAIL STEVE HOWARD 405-596-8873
YALE OIL GREG COX 405-840-1811
WESTERN OIL AND GAS BILL HODGES 405-235-4590
TITAN RESOURCES KEVIN CREEDON 918-298-1811
TITAN OIL AND GAS SHANE WOOD 800-499-8900
VAUGHAN GOOD VAUGHAN GOOD 580-233-3899
VECTOR EXPLORATION INC. KEN HEDRICK 405-340-5373
WARREN CORPORATION JOHN WARREN 405-630-7336
RANKEN ENERGY CORP GENE DUNCAN 405-340-2363
FAR-WEST KENT PHILLIPS 405-557-1384
OKLAND MARK WELLS 405-236-3046
OVERFLOW ENERGY MARK LOBMEYER 806-435-1931
SUMMIT OIL JASON GOSS 405-830-8365
CIRCLE 9 RESOURCES KARL BIZZELL 405-650-2548
Dan D Drilling References